ath79: use both WNDR3x00 power leds for boot status indication

Use the orange led by default to match the bootloader/stock firmware
behaviour. Turn on the green power led after boot to indicate a
finished boot and the orange one off.

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
[reword commit message, keep orange power led enabled during early
kernel boot]
Signed-off-by: Mathias Kresin <dev@kresin.me>

diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi b/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi
index f58494527397ff2cb51c1582601f086e64ff6a40..e05e8599b3bb0b9d02e8c4caf54ad758145130d5 100644 (file)
--- a/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi
@@ -8,10 +8,10 @@
 
 / {
        aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_green;
+               led-boot = &power_orange;
+               led-failsafe = &power_orange;
                led-running = &power_green;
-               led-upgrade = &power_green;
+               led-upgrade = &power_orange;
        };
 
        chosen {
@@ -51,10 +51,10 @@
                        default-state = "off";
                };
 
-               power_orange {
+               power_orange: power_orange {
                        label = "netgear:orange:power";
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
+                       default-state = "on";
                };
 
                wps_green {