adm5120: add support for 3.7
authorGabor Juhos <juhosg@openwrt.org>
Tue, 1 Jan 2013 13:15:49 +0000 (13:15 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Tue, 1 Jan 2013 13:15:49 +0000 (13:15 +0000)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34954

18 files changed:
target/linux/adm5120/config-3.7 [new file with mode: 0644]
target/linux/adm5120/patches-3.7/001-adm5120.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/002-adm5120_flash.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/003-adm5120_switch.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/005-adm5120_usb.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/007-adm5120_pci.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/009-adm5120_leds_switch_trigger.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/101-cfi_fixup_macronix_bootloc.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/102-jedec_pmc_39lvxxx_chips.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/103-mtd_trxsplit.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/120-rb153_cf_driver.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/200-amba_pl010_hacks.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/201-amba_bus_hacks.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/203-gpio_leds_brightness.patch [new file with mode: 0644]
target/linux/adm5120/patches-3.7/310-adm5120_wdt.patch [new file with mode: 0644]
target/linux/adm5120/rb1xx/config-3.7 [new file with mode: 0644]
target/linux/adm5120/router_be/config-3.7 [new file with mode: 0644]
target/linux/adm5120/router_le/config-3.7 [new file with mode: 0644]

diff --git a/target/linux/adm5120/config-3.7 b/target/linux/adm5120/config-3.7
new file mode 100644 (file)
index 0000000..49e7e94
--- /dev/null
@@ -0,0 +1,206 @@
+CONFIG_ADM5120=y
+CONFIG_ADM5120_ENET=y
+CONFIG_ADM5120_MACH_5GXI=y
+CONFIG_ADM5120_MACH_BR_6104K=y
+CONFIG_ADM5120_MACH_BR_6104KP=y
+CONFIG_ADM5120_MACH_BR_61X4WG=y
+CONFIG_ADM5120_MACH_CAS_771=y
+CONFIG_ADM5120_MACH_EASY5120P_ATA=y
+CONFIG_ADM5120_MACH_EASY5120_RT=y
+CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
+CONFIG_ADM5120_MACH_EASY83000=y
+CONFIG_ADM5120_MACH_EB_214A=y
+CONFIG_ADM5120_MACH_NFS_101=y
+CONFIG_ADM5120_MACH_NP27G=y
+CONFIG_ADM5120_MACH_NP28G=y
+CONFIG_ADM5120_MACH_PMUGW=y
+# CONFIG_ADM5120_MACH_RB_11X is not set
+# CONFIG_ADM5120_MACH_RB_133 is not set
+# CONFIG_ADM5120_MACH_RB_133C is not set
+# CONFIG_ADM5120_MACH_RB_150 is not set
+# CONFIG_ADM5120_MACH_RB_153 is not set
+# CONFIG_ADM5120_MACH_RB_192 is not set
+CONFIG_ADM5120_MACH_WP54=y
+CONFIG_ADM5120_OEM_CELLVISION=y
+CONFIG_ADM5120_OEM_COMPEX=y
+CONFIG_ADM5120_OEM_EDIMAX=y
+CONFIG_ADM5120_OEM_GENERIC=y
+CONFIG_ADM5120_OEM_INFINEON=y
+# CONFIG_ADM5120_OEM_MIKROTIK is not set
+CONFIG_ADM5120_OEM_MOTOROLA=y
+CONFIG_ADM5120_OEM_OSBRIDGE=y
+# CONFIG_ADM5120_OEM_ZYXEL is not set
+CONFIG_ADM5120_SOC_BGA=y
+CONFIG_ADM5120_WDT=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM_AMBA=y
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ATA=m
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HID=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_HOSTAP_PCI=m
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=m
+# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_LEDS_TRIGGER_ADM5120_SWITCH is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_MII=m
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_SEAD3 is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_ADM5120=y
+CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_TRXSPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NLS=m
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_NO_HZ=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_MOD=m
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
+# CONFIG_SERIAL_AMBA_PL011 is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_SWAP is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB=m
+CONFIG_USB_ADM5120_HCD=m
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_COMMON=m
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_WATCHDOG_CORE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120/patches-3.7/001-adm5120.patch b/target/linux/adm5120/patches-3.7/001-adm5120.patch
new file mode 100644 (file)
index 0000000..3faf8ec
--- /dev/null
@@ -0,0 +1,44 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -50,6 +50,24 @@ choice
+       prompt "System type"
+       default SGI_IP22
++config ADM5120
++      bool "Infineon/ADMtek ADM5120 SoC based machines"
++      select BOOT_RAW
++      select NO_EXCEPT_FILL
++      select CEVT_R4K
++      select CSRC_R4K
++      select SYS_HAS_CPU_MIPS32_R1
++      select SYS_HAS_EARLY_PRINTK
++      select DMA_NONCOHERENT
++      select IRQ_CPU
++      select SYS_SUPPORTS_LITTLE_ENDIAN
++      select SYS_SUPPORTS_BIG_ENDIAN
++      select SYS_SUPPORTS_32BIT_KERNEL
++      select ARCH_REQUIRE_GPIOLIB
++      select SWAP_IO_SPACE if CPU_BIG_ENDIAN
++      select MIPS_MACHINE
++      select HAVE_CLK
++
+ config MIPS_ALCHEMY
+       bool "Alchemy processor based machines"
+       select 64BIT_PHYS_ADDR
+@@ -855,6 +873,7 @@ config NLM_XLP_BOARD
+ endchoice
++source "arch/mips/adm5120/Kconfig"
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/ath79/Kconfig"
+ source "arch/mips/bcm47xx/Kconfig"
+--- a/arch/mips/Kbuild.platforms
++++ b/arch/mips/Kbuild.platforms
+@@ -1,5 +1,6 @@
+ # All platforms listed in alphabetic order
++platforms += adm5120
+ platforms += alchemy
+ platforms += ar7
+ platforms += ath79
diff --git a/target/linux/adm5120/patches-3.7/002-adm5120_flash.patch b/target/linux/adm5120/patches-3.7/002-adm5120_flash.patch
new file mode 100644 (file)
index 0000000..0884cf3
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -515,4 +515,8 @@ config MTD_LATCH_ADDR
+           If compiled as a module, it will be called latch-addr-flash.
++config MTD_ADM5120
++      tristate "Map driver for ADM5120 based boards"
++      depends on ADM5120
++
+ endmenu
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -38,6 +38,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
+ obj-$(CONFIG_MTD_DBOX2)               += dbox2-flash.o
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI)         += pci.o
++obj-$(CONFIG_MTD_ADM5120)     += adm5120-flash.o
+ obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
+ obj-$(CONFIG_MTD_IMPA7)               += impa7.o
+ obj-$(CONFIG_MTD_FORTUNET)    += fortunet.o
diff --git a/target/linux/adm5120/patches-3.7/003-adm5120_switch.patch b/target/linux/adm5120/patches-3.7/003-adm5120_switch.patch
new file mode 100644 (file)
index 0000000..970d3d6
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -255,6 +255,10 @@ source "drivers/net/dsa/Kconfig"
+ source "drivers/net/ethernet/Kconfig"
++config ADM5120_ENET
++      tristate "ADM5120 Ethernet switch support"
++      depends on ADM5120
++
+ source "drivers/net/fddi/Kconfig"
+ source "drivers/net/hippi/Kconfig"
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_CAN) += can/
+ obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+ obj-$(CONFIG_NET_DSA) += dsa/
+ obj-$(CONFIG_ETHERNET) += ethernet/
++obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
+ obj-$(CONFIG_FDDI) += fddi/
+ obj-$(CONFIG_HIPPI) += hippi/
+ obj-$(CONFIG_HAMRADIO) += hamradio/
diff --git a/target/linux/adm5120/patches-3.7/005-adm5120_usb.patch b/target/linux/adm5120/patches-3.7/005-adm5120_usb.patch
new file mode 100644 (file)
index 0000000..54a3cc8
--- /dev/null
@@ -0,0 +1,33 @@
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_USB_DWC3)               += dwc3/
+ obj-$(CONFIG_USB_MON)         += mon/
+ obj-$(CONFIG_PCI)             += host/
++obj-$(CONFIG_USB_ADM5120_HCD) += host/
+ obj-$(CONFIG_USB_EHCI_HCD)    += host/
+ obj-$(CONFIG_USB_ISP116X_HCD) += host/
+ obj-$(CONFIG_USB_OHCI_HCD)    += host/
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -4,6 +4,10 @@
+ comment "USB Host Controller Drivers"
+       depends on USB
++config USB_ADM5120_HCD
++      tristate "ADM5120 HCD support (EXPERIMENTAL)"
++      depends on USB && ADM5120 && EXPERIMENTAL
++
+ config USB_C67X00_HCD
+       tristate "Cypress C67x00 HCD support"
+       depends on USB
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_WHCI_HCD)   += whci/
+ obj-$(CONFIG_PCI)             += pci-quirks.o
++obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
+ obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
+ obj-$(CONFIG_USB_OXU210HP_HCD)        += oxu210hp-hcd.o
+ obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/target/linux/adm5120/patches-3.7/007-adm5120_pci.patch b/target/linux/adm5120/patches-3.7/007-adm5120_pci.patch
new file mode 100644 (file)
index 0000000..c0b8756
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)     += ops-tx4927.o
+ obj-$(CONFIG_BCM47XX)         += pci-bcm47xx.o
+ obj-$(CONFIG_BCM63XX)         += pci-bcm63xx.o fixup-bcm63xx.o \
+                                       ops-bcm63xx.o
++obj-$(CONFIG_ADM5120)         += pci-adm5120.o
+ obj-$(CONFIG_MIPS_ALCHEMY)    += pci-alchemy.o
+ obj-$(CONFIG_SOC_AR71XX)      += pci-ar71xx.o
+ obj-$(CONFIG_PCI_AR724X)      += pci-ar724x.o
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -1806,6 +1806,9 @@
+ #define PCI_VENDOR_ID_ESDGMBH         0x12fe
+ #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
++#define PCI_VENDOR_ID_ADMTEK          0x1317
++#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
++
+ #define PCI_VENDOR_ID_SIIG            0x131f
+ #define PCI_SUBVENDOR_ID_SIIG         0x131f
+ #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches-3.7/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-3.7/009-adm5120_leds_switch_trigger.patch
new file mode 100644 (file)
index 0000000..d225993
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -577,4 +577,12 @@ config LEDS_TRIGGER_USBDEV
+         This allows LEDs to be controlled by the presence/activity of
+         an USB device. If unsure, say N.
++config LEDS_TRIGGER_ADM5120_SWITCH
++      tristate "LED ADM5120 Switch Port Status Trigger"
++      depends on LEDS_TRIGGERS && ADM5120
++      help
++        This allows LEDs to be controlled by the port states of
++        the ADM5120 built-in Ethernet Switch
++        If unsure, say N.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -68,3 +68,4 @@ obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) +=
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)      += ledtrig-morse.o
+ obj-$(CONFIG_LEDS_TRIGGER_NETDEV)     += ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_USBDEV)     += ledtrig-usbdev.o
++obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-3.7/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-3.7/101-cfi_fixup_macronix_bootloc.patch
new file mode 100644 (file)
index 0000000..46ec7b6
--- /dev/null
@@ -0,0 +1,84 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -48,6 +48,12 @@
+ #define SST49LF008A           0x005a
+ #define AT49BV6416            0x00d6
++/* Macronix */
++#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
++#define MX29LV160T    0x22C4  /* MX29LV160 Top-boot chip */
++#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
++#define MX29LV320T    0x22A7  /* MX29LV320 Top-boot chip */
++
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -358,6 +364,41 @@ static struct cfi_fixup cfi_nopri_fixup_
+       { 0, 0, NULL }
+ };
++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++/*
++ * Some Macronix chips has no/bad bootblock information in the CFI table
++ */
++static void fixup_macronix_bootloc(struct mtd_info *mtd)
++{
++      struct map_info *map = mtd->priv;
++      struct cfi_private *cfi = map->fldrv_priv;
++      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
++      __u8 t;
++
++      switch (cfi->id) {
++      /* TODO: put affected chip ids here */
++      case MX29LV160B:
++      case MX29LV320B:
++              t = 2;  /* Bottom boot */
++              break;
++      case MX29LV160T:
++      case MX29LV320T:
++              t = 3;  /* Top boot */
++              break;
++      default:
++              return;
++      }
++
++      if (extp->TopBottom == t)
++              /* boot location detected by the CFI layer is correct */
++              return;
++
++      extp->TopBottom = t;
++      printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
++              "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
++}
++#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
++
+ static struct cfi_fixup cfi_fixup_table[] = {
+       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri },
+ #ifdef AMD_BOOTLOC_BUG
+@@ -400,6 +441,9 @@ static struct cfi_fixup fixup_table[] =
+        */
+       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip },
+       { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock },
++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++      { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc },
++#endif
+       { 0, 0, NULL }
+ };
+--- a/drivers/mtd/chips/Kconfig
++++ b/drivers/mtd/chips/Kconfig
+@@ -189,6 +189,14 @@ config MTD_CFI_AMDSTD
+         provides support for one of those command sets, used on chips
+         including the AMD Am29LV320.
++config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++      bool "Fix boot-block location for Macronix flash chips"
++      depends on MTD_CFI_AMDSTD
++      help
++        Some Macronix flash chips have no/wrong boot-block location in the
++        CFI table, and the driver may detect the type incorrectly. Select
++        this if your board has such chip.
++
+ config MTD_CFI_STAA
+       tristate "Support for ST (Advanced Architecture) flash chips"
+       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-3.7/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-3.7/102-jedec_pmc_39lvxxx_chips.patch
new file mode 100644 (file)
index 0000000..00148fa
--- /dev/null
@@ -0,0 +1,68 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -115,6 +115,10 @@
+ #define UPD29F064115  0x221C
+ /* PMC */
++#define PM39LV512     0x001B
++#define PM39LV010     0x001C
++#define PM39LV020     0x003D
++#define PM39LV040     0x003E
+ #define PM49FL002     0x006D
+ #define PM49FL004     0x006E
+ #define PM49FL008     0x006A
+@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
+                       ERASEINFO(0x02000,2),
+                       ERASEINFO(0x04000,1),
+               }
++        }, {
++              .mfr_id         = CFI_MFR_PMC,
++              .dev_id         = PM39LV512,
++              .name           = "PMC Pm39LV512",
++              .devtypes       = CFI_DEVICETYPE_X8,
++              .uaddr          = MTD_UADDR_0x0555_0x02AA,
++              .dev_size       = SIZE_64KiB,
++              .cmd_set        = P_ID_AMD_STD,
++              .nr_regions     = 1,
++              .regions        = {
++                      ERASEINFO(0x01000,16),
++              }
++        }, {
++              .mfr_id         = CFI_MFR_PMC,
++              .dev_id         = PM39LV010,
++              .name           = "PMC Pm39LV010",
++              .devtypes       = CFI_DEVICETYPE_X8,
++              .uaddr          = MTD_UADDR_0x0555_0x02AA,
++              .dev_size       = SIZE_128KiB,
++              .cmd_set        = P_ID_AMD_STD,
++              .nr_regions     = 1,
++              .regions        = {
++                      ERASEINFO(0x01000,32),
++              }
++        }, {
++              .mfr_id         = CFI_MFR_PMC,
++              .dev_id         = PM39LV020,
++              .name           = "PMC Pm39LV020",
++              .devtypes       = CFI_DEVICETYPE_X8,
++              .uaddr          = MTD_UADDR_0x0555_0x02AA,
++              .dev_size       = SIZE_256KiB,
++              .cmd_set        = P_ID_AMD_STD,
++              .nr_regions     = 1,
++              .regions        = {
++                      ERASEINFO(0x01000,64),
++              }
++        }, {
++              .mfr_id         = CFI_MFR_PMC,
++              .dev_id         = PM39LV040,
++              .name           = "PMC Pm39LV040",
++              .devtypes       = CFI_DEVICETYPE_X8,
++              .uaddr          = MTD_UADDR_0x0555_0x02AA,
++              .dev_size       = SIZE_512KiB,
++              .cmd_set        = P_ID_AMD_STD,
++              .nr_regions     = 1,
++              .regions        = {
++                      ERASEINFO(0x01000,128),
++              }
+       }, {
+               .mfr_id         = CFI_MFR_PMC,
+               .dev_id         = PM49FL002,
diff --git a/target/linux/adm5120/patches-3.7/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-3.7/103-mtd_trxsplit.patch
new file mode 100644 (file)
index 0000000..08fecd8
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -31,6 +31,10 @@ config MTD_ROOTFS_SPLIT
+       bool "Automatically split 'rootfs' partition for squashfs"
+       default y
++config MTD_TRXSPLIT
++      bool "Automatically find and split TRX partitions"
++      default n
++
+ config MTD_REDBOOT_PARTS
+       tristate "RedBoot partition table parsing"
+       ---help---
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)  += ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS)       += bcm63xxpart.o
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)       += bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_TRXSPLIT)    += trxsplit.o
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)                += mtdchar.o
diff --git a/target/linux/adm5120/patches-3.7/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-3.7/120-rb153_cf_driver.patch
new file mode 100644 (file)
index 0000000..3374554
--- /dev/null
@@ -0,0 +1,28 @@
+--- a/drivers/ata/Makefile
++++ b/drivers/ata/Makefile
+@@ -90,6 +90,7 @@ obj-$(CONFIG_PATA_PCMCIA)    += pata_pcmcia
+ obj-$(CONFIG_PATA_PALMLD)     += pata_palmld.o
+ obj-$(CONFIG_PATA_PLATFORM)   += pata_platform.o
+ obj-$(CONFIG_PATA_OF_PLATFORM)        += pata_of_platform.o
++obj-$(CONFIG_PATA_RB153_CF)   += pata_rb153_cf.o
+ obj-$(CONFIG_PATA_RB532)      += pata_rb532_cf.o
+ obj-$(CONFIG_PATA_RZ1000)     += pata_rz1000.o
+ obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -852,6 +852,15 @@ config PATA_QDI
+       help
+         Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
++config PATA_RB153_CF
++      tristate "RouterBOARD 153 Compact Flash support"
++      depends on ADM5120_MACH_RB_153
++      help
++        This option enables support for a Compact Flash connected on
++        the RouterBOARD 153.
++
++        If unsure, say N.
++
+ config PATA_RB532
+       tristate "RouterBoard 532 PATA CompactFlash support"
+       depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-3.7/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-3.7/200-amba_pl010_hacks.patch
new file mode 100644 (file)
index 0000000..7f319d8
--- /dev/null
@@ -0,0 +1,355 @@
+--- a/drivers/tty/serial/amba-pl010.c
++++ b/drivers/tty/serial/amba-pl010.c
+@@ -49,11 +49,9 @@
+ #include <asm/io.h>
+-#define UART_NR               8
+-
+ #define SERIAL_AMBA_MAJOR     204
+ #define SERIAL_AMBA_MINOR     16
+-#define SERIAL_AMBA_NR                UART_NR
++#define SERIAL_AMBA_NR                CONFIG_SERIAL_AMBA_PL010_NUMPORTS
+ #define AMBA_ISR_PASS_LIMIT   256
+@@ -79,9 +77,9 @@ static void pl010_stop_tx(struct uart_po
+       struct uart_amba_port *uap = (struct uart_amba_port *)port;
+       unsigned int cr;
+-      cr = readb(uap->port.membase + UART010_CR);
++      cr = __raw_readl(uap->port.membase + UART010_CR);
+       cr &= ~UART010_CR_TIE;
+-      writel(cr, uap->port.membase + UART010_CR);
++      __raw_writel(cr, uap->port.membase + UART010_CR);
+ }
+ static void pl010_start_tx(struct uart_port *port)
+@@ -89,9 +87,9 @@ static void pl010_start_tx(struct uart_p
+       struct uart_amba_port *uap = (struct uart_amba_port *)port;
+       unsigned int cr;
+-      cr = readb(uap->port.membase + UART010_CR);
++      cr = __raw_readl(uap->port.membase + UART010_CR);
+       cr |= UART010_CR_TIE;
+-      writel(cr, uap->port.membase + UART010_CR);
++      __raw_writel(cr, uap->port.membase + UART010_CR);
+ }
+ static void pl010_stop_rx(struct uart_port *port)
+@@ -99,9 +97,9 @@ static void pl010_stop_rx(struct uart_po
+       struct uart_amba_port *uap = (struct uart_amba_port *)port;
+       unsigned int cr;
+-      cr = readb(uap->port.membase + UART010_CR);
++      cr = __raw_readl(uap->port.membase + UART010_CR);
+       cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
+-      writel(cr, uap->port.membase + UART010_CR);
++      __raw_writel(cr, uap->port.membase + UART010_CR);
+ }
+ static void pl010_enable_ms(struct uart_port *port)
+@@ -109,9 +107,9 @@ static void pl010_enable_ms(struct uart_
+       struct uart_amba_port *uap = (struct uart_amba_port *)port;
+       unsigned int cr;
+-      cr = readb(uap->port.membase + UART010_CR);
++      cr = __raw_readl(uap->port.membase + UART010_CR);
+       cr |= UART010_CR_MSIE;
+-      writel(cr, uap->port.membase + UART010_CR);
++      __raw_writel(cr, uap->port.membase + UART010_CR);
+ }
+ static void pl010_rx_chars(struct uart_amba_port *uap)
+@@ -119,9 +117,9 @@ static void pl010_rx_chars(struct uart_a
+       struct tty_struct *tty = uap->port.state->port.tty;
+       unsigned int status, ch, flag, rsr, max_count = 256;
+-      status = readb(uap->port.membase + UART01x_FR);
++      status = __raw_readl(uap->port.membase + UART01x_FR);
+       while (UART_RX_DATA(status) && max_count--) {
+-              ch = readb(uap->port.membase + UART01x_DR);
++              ch = __raw_readl(uap->port.membase + UART01x_DR);
+               flag = TTY_NORMAL;
+               uap->port.icount.rx++;
+@@ -130,9 +128,9 @@ static void pl010_rx_chars(struct uart_a
+                * Note that the error handling code is
+                * out of the main execution path
+                */
+-              rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
++              rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
+               if (unlikely(rsr & UART01x_RSR_ANY)) {
+-                      writel(0, uap->port.membase + UART01x_ECR);
++                      __raw_writel(0, uap->port.membase + UART01x_ECR);
+                       if (rsr & UART01x_RSR_BE) {
+                               rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
+@@ -162,7 +160,7 @@ static void pl010_rx_chars(struct uart_a
+               uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
+       ignore_char:
+-              status = readb(uap->port.membase + UART01x_FR);
++              status = __raw_readl(uap->port.membase + UART01x_FR);
+       }
+       spin_unlock(&uap->port.lock);
+       tty_flip_buffer_push(tty);
+@@ -175,7 +173,7 @@ static void pl010_tx_chars(struct uart_a
+       int count;
+       if (uap->port.x_char) {
+-              writel(uap->port.x_char, uap->port.membase + UART01x_DR);
++              __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
+               uap->port.icount.tx++;
+               uap->port.x_char = 0;
+               return;
+@@ -187,7 +185,7 @@ static void pl010_tx_chars(struct uart_a
+       count = uap->port.fifosize >> 1;
+       do {
+-              writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
++              __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
+               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+               uap->port.icount.tx++;
+               if (uart_circ_empty(xmit))
+@@ -205,9 +203,9 @@ static void pl010_modem_status(struct ua
+ {
+       unsigned int status, delta;
+-      writel(0, uap->port.membase + UART010_ICR);
++      __raw_writel(0, uap->port.membase + UART010_ICR);
+-      status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
++      status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+       delta = status ^ uap->old_status;
+       uap->old_status = status;
+@@ -235,7 +233,7 @@ static irqreturn_t pl010_int(int irq, vo
+       spin_lock(&uap->port.lock);
+-      status = readb(uap->port.membase + UART010_IIR);
++      status = __raw_readl(uap->port.membase + UART010_IIR);
+       if (status) {
+               do {
+                       if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
+@@ -248,7 +246,7 @@ static irqreturn_t pl010_int(int irq, vo
+                       if (pass_counter-- == 0)
+                               break;
+-                      status = readb(uap->port.membase + UART010_IIR);
++                      status = __raw_readl(uap->port.membase + UART010_IIR);
+               } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
+                                  UART010_IIR_TIS));
+               handled = 1;
+@@ -262,7 +260,7 @@ static irqreturn_t pl010_int(int irq, vo
+ static unsigned int pl010_tx_empty(struct uart_port *port)
+ {
+       struct uart_amba_port *uap = (struct uart_amba_port *)port;
+-      unsigned int status = readb(uap->port.membase + UART01x_FR);
++      unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
+       return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
+ }
+@@ -272,7 +270,7 @@ static unsigned int pl010_get_mctrl(stru
+       unsigned int result = 0;
+       unsigned int status;
+-      status = readb(uap->port.membase + UART01x_FR);
++      status = __raw_readl(uap->port.membase + UART01x_FR);
+       if (status & UART01x_FR_DCD)
+               result |= TIOCM_CAR;
+       if (status & UART01x_FR_DSR)
+@@ -298,12 +296,12 @@ static void pl010_break_ctl(struct uart_
+       unsigned int lcr_h;
+       spin_lock_irqsave(&uap->port.lock, flags);
+-      lcr_h = readb(uap->port.membase + UART010_LCRH);
++      lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
+       if (break_state == -1)
+               lcr_h |= UART01x_LCRH_BRK;
+       else
+               lcr_h &= ~UART01x_LCRH_BRK;
+-      writel(lcr_h, uap->port.membase + UART010_LCRH);
++      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
+       spin_unlock_irqrestore(&uap->port.lock, flags);
+ }
+@@ -331,12 +329,12 @@ static int pl010_startup(struct uart_por
+       /*
+        * initialise the old status of the modem signals
+        */
+-      uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
++      uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+       /*
+        * Finally, enable interrupts
+        */
+-      writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
++      __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
+              uap->port.membase + UART010_CR);
+       return 0;
+@@ -359,10 +357,10 @@ static void pl010_shutdown(struct uart_p
+       /*
+        * disable all interrupts, disable the port
+        */
+-      writel(0, uap->port.membase + UART010_CR);
++      __raw_writel(0, uap->port.membase + UART010_CR);
+       /* disable break condition and fifos */
+-      writel(readb(uap->port.membase + UART010_LCRH) &
++      __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
+               ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
+              uap->port.membase + UART010_LCRH);
+@@ -384,7 +382,7 @@ pl010_set_termios(struct uart_port *port
+       /*
+        * Ask the core to calculate the divisor for us.
+        */
+-      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
++      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
+       quot = uart_get_divisor(port, baud);
+       switch (termios->c_cflag & CSIZE) {
+@@ -447,25 +445,25 @@ pl010_set_termios(struct uart_port *port
+               uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
+       /* first, disable everything */
+-      old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
++      old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
+       if (UART_ENABLE_MS(port, termios->c_cflag))
+               old_cr |= UART010_CR_MSIE;
+-      writel(0, uap->port.membase + UART010_CR);
++      __raw_writel(0, uap->port.membase + UART010_CR);
+       /* Set baud rate */
+       quot -= 1;
+-      writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
+-      writel(quot & 0xff, uap->port.membase + UART010_LCRL);
++      __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
++      __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
+       /*
+        * ----------v----------v----------v----------v-----
+        * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+        * ----------^----------^----------^----------^-----
+        */
+-      writel(lcr_h, uap->port.membase + UART010_LCRH);
+-      writel(old_cr, uap->port.membase + UART010_CR);
++      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
++      __raw_writel(old_cr, uap->port.membase + UART010_CR);
+       spin_unlock_irqrestore(&uap->port.lock, flags);
+ }
+@@ -547,7 +545,7 @@ static struct uart_ops amba_pl010_pops =
+       .verify_port    = pl010_verify_port,
+ };
+-static struct uart_amba_port *amba_ports[UART_NR];
++static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
+ #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
+@@ -557,10 +555,10 @@ static void pl010_console_putchar(struct
+       unsigned int status;
+       do {
+-              status = readb(uap->port.membase + UART01x_FR);
++              status = __raw_readl(uap->port.membase + UART01x_FR);
+               barrier();
+       } while (!UART_TX_READY(status));
+-      writel(ch, uap->port.membase + UART01x_DR);
++      __raw_writel(ch, uap->port.membase + UART01x_DR);
+ }
+ static void
+@@ -574,8 +572,8 @@ pl010_console_write(struct console *co,
+       /*
+        *      First save the CR then disable the interrupts
+        */
+-      old_cr = readb(uap->port.membase + UART010_CR);
+-      writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
++      old_cr = __raw_readl(uap->port.membase + UART010_CR);
++      __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
+       uart_console_write(&uap->port, s, count, pl010_console_putchar);
+@@ -584,10 +582,10 @@ pl010_console_write(struct console *co,
+        *      and restore the TCR
+        */
+       do {
+-              status = readb(uap->port.membase + UART01x_FR);
++              status = __raw_readl(uap->port.membase + UART01x_FR);
+               barrier();
+       } while (status & UART01x_FR_BUSY);
+-      writel(old_cr, uap->port.membase + UART010_CR);
++      __raw_writel(old_cr, uap->port.membase + UART010_CR);
+       clk_disable(uap->clk);
+ }
+@@ -596,9 +594,9 @@ static void __init
+ pl010_console_get_options(struct uart_amba_port *uap, int *baud,
+                            int *parity, int *bits)
+ {
+-      if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
++      if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
+               unsigned int lcr_h, quot;
+-              lcr_h = readb(uap->port.membase + UART010_LCRH);
++              lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
+               *parity = 'n';
+               if (lcr_h & UART01x_LCRH_PEN) {
+@@ -613,8 +611,8 @@ pl010_console_get_options(struct uart_am
+               else
+                       *bits = 8;
+-              quot = readb(uap->port.membase + UART010_LCRL) |
+-                     readb(uap->port.membase + UART010_LCRM) << 8;
++              quot = __raw_readl(uap->port.membase + UART010_LCRL) |
++                     __raw_readl(uap->port.membase + UART010_LCRM) << 8;
+               *baud = uap->port.uartclk / (16 * (quot + 1));
+       }
+ }
+@@ -633,7 +631,7 @@ static int __init pl010_console_setup(st
+        * if so, search for the first available port that does have
+        * console support.
+        */
+-      if (co->index >= UART_NR)
++      if (co->index >= SERIAL_AMBA_NR)
+               co->index = 0;
+       uap = amba_ports[co->index];
+       if (!uap)
+@@ -675,7 +673,7 @@ static struct uart_driver amba_reg = {
+       .dev_name               = "ttyAM",
+       .major                  = SERIAL_AMBA_MAJOR,
+       .minor                  = SERIAL_AMBA_MINOR,
+-      .nr                     = UART_NR,
++      .nr                     = SERIAL_AMBA_NR,
+       .cons                   = AMBA_CONSOLE,
+ };
+--- a/drivers/tty/serial/Kconfig
++++ b/drivers/tty/serial/Kconfig
+@@ -16,10 +16,18 @@ config SERIAL_AMBA_PL010
+       help
+         This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
+         an Integrator/AP or Integrator/PP2 platform, or if you have a
+-        Cirrus Logic EP93xx CPU, say Y or M here.
++        Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
+         If unsure, say N.
++config SERIAL_AMBA_PL010_NUMPORTS
++      int "Maximum number of AMBA PL010 serial ports"
++      depends on SERIAL_AMBA_PL010
++      default "8"
++      ---help---
++        Set this to the number of serial ports you want the AMBA PL010 driver
++        to support.
++
+ config SERIAL_AMBA_PL010_CONSOLE
+       bool "Support for console on AMBA serial port"
+       depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-3.7/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-3.7/201-amba_bus_hacks.patch
new file mode 100644 (file)
index 0000000..dfc0744
--- /dev/null
@@ -0,0 +1,13 @@
+--- a/drivers/amba/bus.c
++++ b/drivers/amba/bus.c
+@@ -20,6 +20,10 @@
+ #include <asm/irq.h>
++#ifndef NO_IRQ
++#define NO_IRQ                (-1)
++#endif
++
+ #define to_amba_driver(d)     container_of(d, struct amba_driver, drv)
+ static const struct amba_id *
diff --git a/target/linux/adm5120/patches-3.7/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-3.7/203-gpio_leds_brightness.patch
new file mode 100644 (file)
index 0000000..5345022
--- /dev/null
@@ -0,0 +1,27 @@
+--- a/drivers/leds/leds-gpio.c
++++ b/drivers/leds/leds-gpio.c
+@@ -55,13 +55,17 @@ static void gpio_led_set(struct led_clas
+               container_of(led_cdev, struct gpio_led_data, cdev);
+       int level;
+-      if (value == LED_OFF)
+-              level = 0;
+-      else
+-              level = 1;
+-
+-      if (led_dat->active_low)
+-              level = !level;
++      switch (value) {
++      case LED_OFF:
++              level = led_dat->active_low ? 1 : 0;
++              break;
++      case LED_FULL:
++              level = led_dat->active_low ? 0 : 1;
++              break;
++      default:
++              level = value;
++              break;
++      }
+       /* Setting GPIOs with I2C/etc requires a task context, and we don't
+        * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-3.7/310-adm5120_wdt.patch b/target/linux/adm5120/patches-3.7/310-adm5120_wdt.patch
new file mode 100644 (file)
index 0000000..d55f63c
--- /dev/null
@@ -0,0 +1,31 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -972,6 +972,18 @@ config RC32434_WDT
+         To compile this driver as a module, choose M here: the
+         module will be called rc32434_wdt.
++config ADM5120_WDT
++      tristate "Infineon ADM5120 SoC hardware watchdog"
++      depends on WATCHDOG && ADM5120
++      help
++        This is a driver for hardware watchdog integrated in Infineon
++        ADM5120 SoC. This watchdog simply watches your kernel to make sure
++        it doesn't freeze, and if it does, it reboots your computer after a
++        certain amount of time.
++
++        To compile this driver as a module, choose M here: the module will be
++        called adm5120_wdt.
++
+ config INDYDOG
+       tristate "Indy/I2 Hardware Watchdog"
+       depends on SGI_HAS_INDYDOG
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -122,6 +122,7 @@ obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
+ obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
+ obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
+ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
++obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
+ obj-$(CONFIG_INDYDOG) += indydog.o
+ obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
+ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
diff --git a/target/linux/adm5120/rb1xx/config-3.7 b/target/linux/adm5120/rb1xx/config-3.7
new file mode 100644 (file)
index 0000000..69c545c
--- /dev/null
@@ -0,0 +1,54 @@
+# CONFIG_ADM5120_MACH_5GXI is not set
+# CONFIG_ADM5120_MACH_BR_6104K is not set
+# CONFIG_ADM5120_MACH_BR_6104KP is not set
+# CONFIG_ADM5120_MACH_BR_61X4WG is not set
+# CONFIG_ADM5120_MACH_CAS_771 is not set
+# CONFIG_ADM5120_MACH_EASY5120P_ATA is not set
+# CONFIG_ADM5120_MACH_EASY5120_RT is not set
+# CONFIG_ADM5120_MACH_EASY5120_WVOIP is not set
+# CONFIG_ADM5120_MACH_EASY83000 is not set
+# CONFIG_ADM5120_MACH_EB_214A is not set
+# CONFIG_ADM5120_MACH_NFS_101 is not set
+# CONFIG_ADM5120_MACH_NP27G is not set
+# CONFIG_ADM5120_MACH_NP28G is not set
+# CONFIG_ADM5120_MACH_PMUGW is not set
+CONFIG_ADM5120_MACH_RB_11X=y
+CONFIG_ADM5120_MACH_RB_133=y
+CONFIG_ADM5120_MACH_RB_133C=y
+CONFIG_ADM5120_MACH_RB_150=y
+CONFIG_ADM5120_MACH_RB_153=y
+CONFIG_ADM5120_MACH_RB_192=y
+# CONFIG_ADM5120_MACH_WP54 is not set
+# CONFIG_ADM5120_OEM_CELLVISION is not set
+# CONFIG_ADM5120_OEM_COMPEX is not set
+# CONFIG_ADM5120_OEM_EDIMAX is not set
+# CONFIG_ADM5120_OEM_GENERIC is not set
+# CONFIG_ADM5120_OEM_INFINEON is not set
+CONFIG_ADM5120_OEM_MIKROTIK=y
+# CONFIG_ADM5120_OEM_MOTOROLA is not set
+# CONFIG_ADM5120_OEM_OSBRIDGE is not set
+CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=yaffs2"
+# CONFIG_JFFS2_FS is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ROOTFS_SPLIT is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_TRXSPLIT is not set
+# CONFIG_OVERLAYFS_FS is not set
+# CONFIG_PATA_RB153_CF is not set
+# CONFIG_SQUASHFS is not set
+CONFIG_YAFFS_9BYTE_TAGS=y
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
+# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
+CONFIG_YAFFS_DISABLE_TAGS_ECC=y
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_YAFFS_XATTR=y
+CONFIG_YAFFS_YAFFS1=y
+CONFIG_YAFFS_YAFFS2=y
diff --git a/target/linux/adm5120/router_be/config-3.7 b/target/linux/adm5120/router_be/config-3.7
new file mode 100644 (file)
index 0000000..c3b9e36
--- /dev/null
@@ -0,0 +1,13 @@
+CONFIG_ADM5120_MACH_P_334WT=y
+CONFIG_ADM5120_MACH_P_335=y
+# CONFIG_ADM5120_OEM_CELLVISION is not set
+# CONFIG_ADM5120_OEM_COMPEX is not set
+# CONFIG_ADM5120_OEM_EDIMAX is not set
+# CONFIG_ADM5120_OEM_GENERIC is not set
+# CONFIG_ADM5120_OEM_INFINEON is not set
+# CONFIG_ADM5120_OEM_MOTOROLA is not set
+# CONFIG_ADM5120_OEM_OSBRIDGE is not set
+CONFIG_ADM5120_OEM_ZYXEL=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SWAP_IO_SPACE=y
diff --git a/target/linux/adm5120/router_le/config-3.7 b/target/linux/adm5120/router_le/config-3.7
new file mode 100644 (file)
index 0000000..e69de29