ramips: add support for WAVLINK WL-WN577A2
authorLars Wessels <software@bytebox.org>
Thu, 25 Jun 2020 19:09:59 +0000 (21:09 +0200)
committerDavid Bauer <mail@david-bauer.net>
Sun, 28 Jun 2020 23:08:01 +0000 (01:08 +0200)
This commit adds support for the Wavlink WL-WN577A2 (black case) dual-band
wall-plug wireless router. In Germany this device is sold under the brand
name Maginon WL-755 (white case):

Device specifications:

- CPU: MediaTek MT7628AN (580MHz)
- Flash: 8MB
- RAM: 64MB
- Bootloader: U-Boot
- Ethernet: 2x 10/100 Mbps (Ralink RT3050)
- 2.4 GHz: 802.11b/g/n SoC
- 5 GHz: 802.11a/n/ac MT7610E
- Antennas: internal
- 4 green LEDs: 1 programmable (WPS) + LAN, WAN, POWER
- Buttons: Reset, WPS
- Small sliding power switch

Flashing instructions (U-boot):

- Configure a TFTP server on your PC/Laptop and set its IP
  to 192.168.10.100

- Rename the OpenWrt image to firmware.bin and place it in the
  root folder of the TFTP server

- Power off (using the small sliding power switch on the left
  side) the device and connect an ethernet cable from its LAN
  or WAN port to your PC/Laptop

- Press the WPS button (and keep it pressed)

- Power on the device (using the small power switch)

- After a few seconds, when the WAN/LAN LED stops blinking
  very fast, release the WPS button

- Flashing OpenWrt takes less than a minute, system will
  reboot automatically

- After reboot the WPS LED will indicate the current OpenWrt
  running status

Signed-off-by: Lars Wessels <software@bytebox.org>
[removed unused labels - fix whitespace errors - wrap commit message]
Signed-off-by: David Bauer <mail@david-bauer.net>
target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts [new file with mode: 0644]
target/linux/ramips/image/mt76x8.mk
target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
target/linux/ramips/mt76x8/base-files/etc/board.d/02_network

diff --git a/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts b/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts
new file mode 100644 (file)
index 0000000..41dfec3
--- /dev/null
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7628an.dtsi"
+
+/ {
+       compatible = "wavlink,wl-wn577a2", "maginon,wlr-755", "mediatek,mt7628an-soc";
+       model = "WAVLINK WL-WN577A2";
+
+       aliases {
+               led-boot = &led_wps;
+               led-failsafe = &led_wps;
+               led-running = &led_wps;
+               led-upgrade = &led_wps;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               lan {
+                       label = "wl-wn577a2:green:lan";
+                       gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "wl-wn577a2:green:wan";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+               };
+
+               led_wps: wps {
+                       label = "wl-wn577a2:green:wps";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "i2c", "wdt", "p0led_an", "p3led_an", "p4led_an";
+               function = "gpio";
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <40000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
+               };
+       };
+};
+
+&wmac {
+       status = "okay";
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+       mediatek,portmap = <0x2f>;
+};
+
+&usbphy {
+       status = "disabled";
+};
+
+&ehci {
+       status = "disabled";
+};
+
+&ohci {
+       status = "disabled";
+};
index a18afef..605537a 100644 (file)
@@ -556,6 +556,16 @@ define Device/wavlink_wl-wn575a3
 endef
 TARGET_DEVICES += wavlink_wl-wn575a3
 
+define Device/wavlink_wl-wn577a2
+  IMAGE_SIZE := 7872k
+  DEVICE_VENDOR := Wavlink
+  DEVICE_MODEL := WL-WN577A2
+  DEVICE_ALT0_VENDOR := Maginon
+  DEVICE_ALT0_MODEL := WLR-755
+  DEVICE_PACKAGES := kmod-mt76x0e
+endef
+TARGET_DEVICES += wavlink_wl-wn577a2
+
 define Device/widora_neo-16m
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := Widora
index fc582be..9db39cb 100755 (executable)
@@ -122,6 +122,10 @@ wavlink,wl-wn575a3)
        ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
        ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
        ;;
+wavlink,wl-wn577a2)
+       ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x8"
+       ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
+       ;;
 zbtlink,zbt-we1226)
        set_wifi_led "$boardname:green:wlan"
        ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
index 2b4ca09..1cccc16 100755 (executable)
@@ -38,7 +38,8 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
-       buffalo,wcr-1166ds)
+       buffalo,wcr-1166ds|\
+       wavlink,wl-wn577a2)
                ucidef_add_switch "switch0" \
                        "3:lan" "4:wan" "6@eth0"
                ;;
@@ -186,6 +187,10 @@ ramips_setup_macs()
        wiznet,wizfi630s)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1)
                ;;
+       wavlink,wl-wn577a2)
+               wan_mac=$(mtd_get_mac_binary factory 0x2e)
+               label_mac=$(mtd_get_mac_binary factory 0x4)
+               ;;
        skylab,skw92a|\
        totolink,lr1200)
                wan_mac=$(mtd_get_mac_binary factory 0x2e)