target/linux/lantiq/dts/vr9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,vr9";
   7
   8         aliases {
   9                 serial0 = &asc1;
  10         };
  11
  12         chosen {
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         cpus {
  17                 cpu@0 {
  18                         compatible = "mips,mips34Kc";
  19                 };
  20         };
  21
  22         memory@0 {
  23                 device_type = "memory";
  24         };
  25
  26         cputemp@0 {
  27                 compatible = "lantiq,cputemp";
  28         };
  29
  30         biu@1F800000 {
  31                 #address-cells = <1>;
  32                 #size-cells = <1>;
  33                 compatible = "lantiq,biu", "simple-bus";
  34                 reg = <0x1F800000 0x800000>;
  35                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  36
  37                 icu0: icu@80200 {
  38                         #interrupt-cells = <1>;
  39                         interrupt-controller;
  40                         compatible = "lantiq,icu";
  41                         reg = <0x80200 0x28
  42                                 0x80228 0x28
  43                                 0x80250 0x28
  44                                 0x80278 0x28
  45                                 0x802a0 0x28>;
  46                 };
  47
  48                 watchdog@803F0 {
  49                         compatible = "lantiq,wdt";
  50                         reg = <0x803F0 0x10>;
  51                 };
  52         };
  53
  54         sram@1F000000 {
  55                 #address-cells = <1>;
  56                 #size-cells = <1>;
  57                 compatible = "lantiq,sram", "simple-bus";
  58                 reg = <0x1F000000 0x800000>;
  59                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  60
  61                 eiu0: eiu@101000 {
  62                         #interrupt-cells = <1>;
  63                         interrupt-controller;
  64                         compatible = "lantiq,eiu-xway";
  65                         reg = <0x101000 0x1000>;
  66                         interrupt-parent = <&icu0>;
  67                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  68                 };
  69
  70                 pmu0: pmu@102000 {
  71                         compatible = "lantiq,pmu-xway";
  72                         reg = <0x102000 0x1000>;
  73                 };
  74
  75                 cgu0: cgu@103000 {
  76                         compatible = "lantiq,cgu-xway";
  77                         reg = <0x103000 0x1000>;
  78                 };
  79
  80                 dcdc@106a00 {
  81                         compatible = "lantiq,dcdc-xrx200";
  82                         reg = <0x106a00 0x200>;
  83                 };
  84
  85                 vmmc@107000 {
  86                         status = "disabled";
  87                         compatible = "lantiq,vmmc-xway";
  88                         reg = <0x103000 0x400>;
  89                         interrupt-parent = <&icu0>;
  90                         interrupts = <150 151 152 153 154 155>;
  91                 };
  92
  93                 rcu0: rcu@203000 {
  94                         compatible = "lantiq,rcu-xrx200";
  95                         reg = <0x203000 0x1000>;
  96                         /* irq for thermal sensor */
  97                         interrupt-parent = <&icu0>;
  98                         interrupts = <115>;
  99                 };
 100
 101                 xbar0: xbar@400000 {
 102                         compatible = "lantiq,xbar-xway";
 103                         reg = <0x400000 0x1000>;
 104                 };
 105         };
 106
 107         fpi@10000000 {
 108                 #address-cells = <1>;
 109                 #size-cells = <1>;
 110                 compatible = "lantiq,fpi", "simple-bus";
 111                 ranges = <0x0 0x10000000 0xEEFFFFF>;
 112                 reg = <0x10000000 0xEF00000>;
 113
 114                 localbus@0 {
 115                         #address-cells = <2>;
 116                         #size-cells = <1>;
 117                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
 118                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 119                         compatible = "lantiq,localbus", "simple-bus";
 120                 };
 121
 122                 gptu@E100A00 {
 123                         compatible = "lantiq,gptu-xway";
 124                         reg = <0xE100A00 0x100>;
 125                         interrupt-parent = <&icu0>;
 126                         interrupts = <126 127 128 129 130 131>;
 127                 };
 128
 129                 asc0: serial@E100400 {
 130                         compatible = "lantiq,asc";
 131                         reg = <0xE100400 0x400>;
 132                         interrupt-parent = <&icu0>;
 133                         interrupts = <104 105 106>;
 134                         status = "disabled";
 135                 };
 136
 137                 spi: spi@E100800 {
 138                         compatible = "lantiq,xrx200-spi";
 139                         reg = <0xE100800 0x100>;
 140                         interrupt-parent = <&icu0>;
 141                         interrupts = <22 23 24>;
 142                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 143                                         "spi_frm";
 144                         #address-cells = <1>;
 145                         #size-cells = <1>;
 146                         status = "disabled";
 147                 };
 148
 149                 gpio: pinmux@E100B10 {
 150                         compatible = "lantiq,xrx200-pinctrl";
 151                         #gpio-cells = <2>;
 152                         gpio-controller;
 153                         reg = <0xE100B10 0xA0>;
 154                 };
 155
 156                 asc1: serial@E100C00 {
 157                         compatible = "lantiq,asc";
 158                         reg = <0xE100C00 0x400>;
 159                         interrupt-parent = <&icu0>;
 160                         interrupts = <112 113 114>;
 161                 };
 162
 163                 deu@E103100 {
 164                         compatible = "lantiq,deu-xrx200";
 165                         reg = <0xE103100 0xf00>;
 166                 };
 167
 168                 dma0: dma@E104100 {
 169                         compatible = "lantiq,dma-xway";
 170                         reg = <0xE104100 0x800>;
 171                 };
 172
 173                 ebu0: ebu@E105300 {
 174                         compatible = "lantiq,ebu-xway";
 175                         reg = <0xE105300 0x100>;
 176                 };
 177
 178                 ifxhcd@E101000 {
 179                         status = "disabled";
 180                         compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2";
 181                         reg = <0xE101000 0x1000
 182                                 0xE120000 0x3f000>;
 183                         interrupt-parent = <&icu0>;
 184                         interrupts = <62 91>;
 185                 };
 186
 187                 ifxhcd@E106000 {
 188                         status = "disabled";
 189                         compatible = "lantiq,ifxhcd-xrx200-dwc2";
 190                         reg = <0xE106000 0x1000>;
 191                         interrupt-parent = <&icu0>;
 192                         interrupts = <91>;
 193                 };
 194
 195                 eth0: eth@E108000 {
 196                         #address-cells = <1>;
 197                         #size-cells = <0>;
 198                         compatible = "lantiq,xrx200-net";
 199                         reg = < 0xE108000 0x3000 /* switch */
 200                                 0xE10B100 0x70 /* mdio */
 201                                 0xE10B1D8 0x30 /* mii */
 202                                 0xE10B308 0x30 /* pmac */
 203                         >;
 204                         interrupt-parent = <&icu0>;
 205                         interrupts = <75 73 72>;
 206                 };
 207
 208                 mei@E116000 {
 209                         compatible = "lantiq,mei-xrx200";
 210                         reg = <0xE116000 0x9c>;
 211                         interrupt-parent = <&icu0>;
 212                         interrupts = <63>;
 213                 };
 214
 215                 ppe@E234000 {
 216                         compatible = "lantiq,ppe-xrx200";
 217                         interrupt-parent = <&icu0>;
 218                         interrupts = <96>;
 219                 };
 220
 221                 pcie0: pcie@d900000 {
 222                         compatible = "lantiq,pcie-xrx200";
 223
 224                         #interrupt-cells = <1>;
 225                         #size-cells = <2>;
 226                         #address-cells = <3>;
 227
 228                         interrupt-parent = <&icu0>;
 229                         interrupts = <161 144>;
 230
 231                         device_type = "pci";
 232
 233                         gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
 234                 };
 235
 236                 pci0: pci@E105400 {
 237                         status = "disabled";
 238
 239                         #address-cells = <3>;
 240                         #size-cells = <2>;
 241                         #interrupt-cells = <1>;
 242                         compatible = "lantiq,pci-xway";
 243                         bus-range = <0x0 0x0>;
 244                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 245                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 246                         reg = <0x7000000 0x8000         /* config space */
 247                                 0xE105400 0x400>;       /* pci bridge */
 248                         lantiq,bus-clock = <33333333>;
 249                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 250                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
 251                         req-mask = <0x1>; /* GNT1 */
 252                 };
 253         };
 254
 255         vdsl {
 256                 compatible = "lantiq,vdsl-vrx200";
 257         };
 258 };