ramips: dts file cleanup
[openwrt/staging/florian.git] / target / linux / ramips / dts / WNCE2001.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "WNCE2001", "ralink,rt3052-soc";
7 model = "Netgear WNCE2001";
8
9 chosen {
10 bootargs = "console=ttyS0,115200";
11 };
12
13 palmbus@10000000 {
14 sysc@0 {
15 ralink,pinmux = "spi", "uartlite", "jtag", "sdram";
16 ralink,gpiomux = "i2c", "mdio", "rgmii";
17 ralink,uartmux = "gpio";
18 ralink,wdtmux = <1>;
19 };
20
21 gpio0: gpio@600 {
22 status = "okay";
23 };
24
25 spi@b00 {
26 status = "okay";
27 m25p80@0 {
28 #address-cells = <1>;
29 #size-cells = <1>;
30 compatible = "mx25l3205d";
31 reg = <0 0>;
32 linux,modalias = "m25p80", "mx25l3205d";
33 spi-max-frequency = <10000000>;
34
35 partition@0 {
36 label = "u-boot";
37 reg = <0x0 0x30000>;
38 read-only;
39 };
40
41 factory: partition@30000 {
42 label = "factory";
43 reg = <0x30000 0x10000>;
44 read-only;
45 };
46
47 partition@40000 {
48 label = "config";
49 reg = <0x40000 0x20000>;
50 read-only;
51 };
52
53 partition@60000 {
54 label = "language";
55 reg = <0x60000 0x30000>;
56 read-only;
57 };
58
59 partition@90000 {
60 label = "pot";
61 reg = <0x90000 0x10000>;
62 read-only;
63 };
64
65 partition@a0000 {
66 label = "checksum";
67 reg = <0xa0000 0x10000>;
68 };
69
70 partition@b0000 {
71 label = "firmware";
72 reg = <0xb0000 0x350000>;
73 };
74 };
75 };
76 };
77
78 ethernet@10100000 {
79 status = "okay";
80 };
81
82 esw@10110000 {
83 status = "okay";
84 };
85
86 wmac@10180000 {
87 status = "okay";
88 };
89
90 gpio-leds {
91 compatible = "gpio-leds";
92 power-green {
93 label = "netgear:green:power";
94 gpios = <&gpio0 8 1>;
95 };
96 power-red {
97 label = "netgear:red:power";
98 gpios = <&gpio0 9 1>;
99 };
100 wlan-green {
101 label = "netgear:green:wlan";
102 gpios = <&gpio0 12 0>;
103 };
104 wlan-red {
105 label = "netgear:red:wlan";
106 gpios = <&gpio0 13 0>;
107 };
108 };
109
110 gpio-keys-polled {
111 compatible = "gpio-keys-polled";
112 #address-cells = <1>;
113 #size-cells = <0>;
114 poll-interval = <20>;
115 reset {
116 label = "reset";
117 gpios = <&gpio0 10 1>;
118 linux,code = <0x198>;
119 };
120 wps {
121 label = "wps";
122 gpios = <&gpio0 0 1>;
123 linux,code = <0x211>;
124 };
125 rt {
126 label = "rt";
127 gpios = <&gpio0 11 1>;
128 linux,code = <0x100>;
129 };
130 ap {
131 label = "ap";
132 gpios = <&gpio0 7 1>;
133 linux,code = <0x101>;
134 };
135 };
136 };