target/linux/lantiq/files/arch/mips/boot/dts/ASL56026.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   7
   8 / {
   9         compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
  10         model = "BT OpenReach VDSL Modem";
  11
  12         chosen {
  13                 bootargs = "console=ttyLTQ0,115200";
  14         };
  15
  16         aliases {
  17                 led-boot = &power_green;
  18                 led-failsafe = &power_red;
  19                 led-running = &power_green;
  20                 led-upgrade = &power_green;
  21
  22                 led-dsl = &dsl;
  23         };
  24
  25         memory@0 {
  26                 device_type = "memory";
  27                 reg = <0x0 0x2000000>;
  28         };
  29
  30         gpio-keys-polled {
  31                 compatible = "gpio-keys-polled";
  32                 poll-interval = <100>;
  33
  34                 reset {
  35                         label = "reset";
  36                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
  37                         linux,code = <KEY_RESTART>;
  38                 };
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43
  44                 dsl: dsl {
  45                         label = "asl56026:green:dsl";
  46                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 /* power-* is a bicolour led */
  50                 power_green: power_green {
  51                         label = "asl56026:green:power";
  52                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  53                         default-state = "keep";
  54                 };
  55
  56                 power_red: power_red {
  57                         label = "asl56026:red:power";
  58                         gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
  59                 };
  60         };
  61
  62         gpio_export {
  63                 compatible = "gpio-export";
  64                 #size-cells = <0>;
  65
  66                 power_led_blink {
  67                         gpio-export,name = "power_led_blink";
  68                         gpio-export,output = <0>;
  69                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  70                 };
  71         };
  72 };
  73
  74 &eth0 {
  75         lan: interface@0 {
  76                 compatible = "lantiq,xrx200-pdi";
  77                 #address-cells = <1>;
  78                 #size-cells = <0>;
  79                 reg = <0>;
  80                 lantiq,switch;
  81
  82                 ethernet@2 {
  83                         compatible = "lantiq,xrx200-pdi-port";
  84                         reg = <2>;
  85                         phy-mode = "mii";
  86                         phy-handle = <&phy11>;
  87                 };
  88
  89                 ethernet@3 {
  90                         compatible = "lantiq,xrx200-pdi-port";
  91                         reg = <3>;
  92                         phy-mode = "mii";
  93                         phy-handle = <&phy14>;
  94                 };
  95         };
  96
  97         mdio {
  98                 #address-cells = <1>;
  99                 #size-cells = <0>;
 100                 compatible = "lantiq,xrx200-mdio";
 101
 102                 phy11: ethernet-phy@11 {
 103                         reg = <0x11>;
 104                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 105                 };
 106
 107                 phy14: ethernet-phy@14 {
 108                         reg = <0x14>;
 109                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 110                 };
 111         };
 112 };
 113
 114 &gphy0 {
 115         lantiq,gphy-mode = <GPHY_MODE_FE>;
 116 };
 117
 118 &gphy1 {
 119         lantiq,gphy-mode = <GPHY_MODE_FE>;
 120 };
 121
 122 &gpio {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&state_default>;
 125
 126         state_default: pinmux {
 127                 mdio {
 128                         lantiq,groups = "mdio";
 129                         lantiq,function = "mdio";
 130                 };
 131         };
 132 };
 133
 134 &localbus {
 135         nor@0 {
 136                 compatible = "lantiq,nor";
 137                 bank-width = <2>;
 138                 reg = <0 0x0 0x0800000>;
 139
 140                 partitions {
 141                         compatible = "fixed-partitions";
 142                         #address-cells = <1>;
 143                         #size-cells = <1>;
 144
 145                         partition@0 {
 146                                 label = "uboot";
 147                                 reg = <0x0 0x30000>;
 148                         };
 149
 150                         partition@30000 {
 151                                 label = "uboot_env";
 152                                 reg = <0x30000 0x10000>;
 153                         };
 154
 155                         partition@40000 {
 156                                 label = "firmware";
 157                                 reg = <0x40000 0x750000>;
 158                         };
 159
 160                         partition@790000 {
 161                                 label = "ddrconfig";
 162                                 reg = <0x790000 0x70000>;
 163                                 read-only;
 164                         };
 165                 };
 166         };
 167 };