*
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
* We recommend using nested, driver-specific attributes within this.
-@@ -787,6 +801,11 @@ enum nl80211_commands {
+@@ -787,6 +801,33 @@ enum nl80211_commands {
* This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
* for non-automatic settings.
*
+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
+ * means support for per-station GTKs.
+ *
++ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
++ * This can be used to mask out antennas which are not attached or should
++ * not be used for transmitting. If an antenna is not selected in this
++ * bitmap the hardware is not allowed to transmit on this antenna.
++ *
++ * Each bit represents one antenna, starting with antenna 1 at the first
++ * bit. Depending on which antennas are selected in the bitmap, 802.11n
++ * drivers can derive which chainmasks to use (if all antennas belonging to
++ * a particular chain are disabled this chain should be disabled) and if
++ * a chain has diversity antennas wether diversity should be used or not.
++ * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
++ * derived from the available chains after applying the antenna mask.
++ * Non-802.11n drivers can derive wether to use diversity or not.
++ * Drivers may reject configurations or RX/TX mask combinations they cannot
++ * support by returning -EINVAL.
++ *
++ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
++ * This can be used to mask out antennas which are not attached or should
++ * not be used for receiving. If an antenna is not selected in this bitmap
++ * the hardware should not be configured to receive on this antenna.
++ * For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX.
++ *
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
-@@ -951,6 +970,13 @@ enum nl80211_attrs {
+@@ -951,6 +992,16 @@ enum nl80211_attrs {
NL80211_ATTR_RX_FRAME_TYPES,
NL80211_ATTR_FRAME_TYPE,
+
+ NL80211_ATTR_SUPPORT_IBSS_RSN,
+
++ NL80211_ATTR_WIPHY_ANTENNA_TX,
++ NL80211_ATTR_WIPHY_ANTENNA_RX,
++
+ NL80211_ATTR_MCAST_RATE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -1006,6 +1032,8 @@ enum nl80211_attrs {
+@@ -1006,6 +1057,8 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_WDS: wireless distribution interface
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
* @NL80211_IFTYPE_MESH_POINT: mesh point
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
-@@ -1022,6 +1050,8 @@ enum nl80211_iftype {
+@@ -1022,6 +1075,8 @@ enum nl80211_iftype {
NL80211_IFTYPE_WDS,
NL80211_IFTYPE_MONITOR,
NL80211_IFTYPE_MESH_POINT,
/* keep last */
NUM_NL80211_IFTYPES,
-@@ -1111,6 +1141,8 @@ enum nl80211_rate_info {
+@@ -1111,6 +1166,8 @@ enum nl80211_rate_info {
* @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
* station)
*/
enum nl80211_sta_info {
__NL80211_STA_INFO_INVALID,
-@@ -1124,6 +1156,8 @@ enum nl80211_sta_info {
+@@ -1124,6 +1181,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_TX_BITRATE,
NL80211_STA_INFO_RX_PACKETS,
NL80211_STA_INFO_TX_PACKETS,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
-@@ -1382,6 +1416,17 @@ enum nl80211_reg_rule_flags {
+@@ -1277,7 +1336,11 @@ enum nl80211_bitrate_attr {
+ * wireless core it thinks its knows the regulatory domain we should be in.
+ * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
+ * 802.11 country information element with regulatory information it
+- * thinks we should consider.
++ * thinks we should consider. cfg80211 only processes the country
++ * code from the IE, and relies on the regulatory domain information
++ * structure pased by userspace (CRDA) from our wireless-regdb.
++ * If a channel is enabled but the country code indicates it should
++ * be disabled we disable the channel and re-enable it upon disassociation.
+ */
+ enum nl80211_reg_initiator {
+ NL80211_REGDOM_SET_BY_CORE,
+@@ -1382,6 +1445,17 @@ enum nl80211_reg_rule_flags {
* @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
-@@ -1390,6 +1435,12 @@ enum nl80211_survey_info {
+@@ -1390,6 +1464,12 @@ enum nl80211_survey_info {
__NL80211_SURVEY_INFO_INVALID,
NL80211_SURVEY_INFO_FREQUENCY,
NL80211_SURVEY_INFO_NOISE,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
-@@ -1636,11 +1687,14 @@ enum nl80211_auth_type {
+@@ -1636,11 +1716,14 @@ enum nl80211_auth_type {
* @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
* @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
* @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
};
/**
-@@ -1671,6 +1725,9 @@ enum nl80211_wpa_versions {
+@@ -1671,6 +1754,9 @@ enum nl80211_wpa_versions {
* CCMP keys, each six bytes in little endian
* @NL80211_KEY_DEFAULT: flag indicating default key
* @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
* @__NL80211_KEY_AFTER_LAST: internal
* @NL80211_KEY_MAX: highest key attribute
*/
-@@ -1682,6 +1739,7 @@ enum nl80211_key_attributes {
+@@ -1682,6 +1768,7 @@ enum nl80211_key_attributes {
NL80211_KEY_SEQ,
NL80211_KEY_DEFAULT,
NL80211_KEY_DEFAULT_MGMT,
projects / openwrt / staging / jogo.git / commitdiff