bcm63xx: drop kernel 4.14 support
authorJonas Gorski <jonas.gorski@gmail.com>
Mon, 2 Mar 2020 21:47:45 +0000 (22:47 +0100)
committerJonas Gorski <jonas.gorski@gmail.com>
Mon, 2 Mar 2020 21:42:40 +0000 (22:42 +0100)
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
192 files changed:
target/linux/bcm63xx/config-4.14 [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch [deleted file]
target/linux/bcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch [deleted file]
target/linux/bcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch [deleted file]
target/linux/bcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch [deleted file]
target/linux/bcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch [deleted file]
target/linux/bcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch [deleted file]
target/linux/bcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch [deleted file]
target/linux/bcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch [deleted file]
target/linux/bcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch [deleted file]
target/linux/bcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch [deleted file]
target/linux/bcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch [deleted file]
target/linux/bcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch [deleted file]
target/linux/bcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch [deleted file]
target/linux/bcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch [deleted file]
target/linux/bcm63xx/patches-4.14/122-mtd-bcm63xxpart-add-of_match_table.patch [deleted file]
target/linux/bcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch [deleted file]
target/linux/bcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch [deleted file]
target/linux/bcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch [deleted file]
target/linux/bcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch [deleted file]
target/linux/bcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch [deleted file]
target/linux/bcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch [deleted file]
target/linux/bcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch [deleted file]
target/linux/bcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch [deleted file]
target/linux/bcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch [deleted file]
target/linux/bcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch [deleted file]
target/linux/bcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch [deleted file]
target/linux/bcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch [deleted file]
target/linux/bcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch [deleted file]
target/linux/bcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch [deleted file]
target/linux/bcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch [deleted file]
target/linux/bcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch [deleted file]
target/linux/bcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch [deleted file]
target/linux/bcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch [deleted file]
target/linux/bcm63xx/patches-4.14/309-cfe_version_mod.patch [deleted file]
target/linux/bcm63xx/patches-4.14/310-cfe_simplify_detection.patch [deleted file]
target/linux/bcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch [deleted file]
target/linux/bcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch [deleted file]
target/linux/bcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch [deleted file]
target/linux/bcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch [deleted file]
target/linux/bcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch [deleted file]
target/linux/bcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch [deleted file]
target/linux/bcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch [deleted file]
target/linux/bcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch [deleted file]
target/linux/bcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch [deleted file]
target/linux/bcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch [deleted file]
target/linux/bcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch [deleted file]
target/linux/bcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch [deleted file]
target/linux/bcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch [deleted file]
target/linux/bcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch [deleted file]
target/linux/bcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch [deleted file]
target/linux/bcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch [deleted file]
target/linux/bcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch [deleted file]
target/linux/bcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch [deleted file]
target/linux/bcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch [deleted file]
target/linux/bcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch [deleted file]
target/linux/bcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch [deleted file]
target/linux/bcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch [deleted file]
target/linux/bcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch [deleted file]
target/linux/bcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch [deleted file]
target/linux/bcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch [deleted file]
target/linux/bcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch [deleted file]
target/linux/bcm63xx/patches-4.14/351-set-board-usbh-ports.patch [deleted file]
target/linux/bcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch [deleted file]
target/linux/bcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch [deleted file]
target/linux/bcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch [deleted file]
target/linux/bcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch [deleted file]
target/linux/bcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch [deleted file]
target/linux/bcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch [deleted file]
target/linux/bcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch [deleted file]
target/linux/bcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch [deleted file]
target/linux/bcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch [deleted file]
target/linux/bcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch [deleted file]
target/linux/bcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch [deleted file]
target/linux/bcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch [deleted file]
target/linux/bcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch [deleted file]
target/linux/bcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch [deleted file]
target/linux/bcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch [deleted file]
target/linux/bcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch [deleted file]
target/linux/bcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch [deleted file]
target/linux/bcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch [deleted file]
target/linux/bcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch [deleted file]
target/linux/bcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch [deleted file]
target/linux/bcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch [deleted file]
target/linux/bcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch [deleted file]
target/linux/bcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch [deleted file]
target/linux/bcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch [deleted file]
target/linux/bcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch [deleted file]
target/linux/bcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch [deleted file]
target/linux/bcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch [deleted file]
target/linux/bcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch [deleted file]
target/linux/bcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch [deleted file]
target/linux/bcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch [deleted file]
target/linux/bcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch [deleted file]
target/linux/bcm63xx/patches-4.14/400-bcm963xx_flashmap.patch [deleted file]
target/linux/bcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch [deleted file]
target/linux/bcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch [deleted file]
target/linux/bcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch [deleted file]
target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch [deleted file]
target/linux/bcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch [deleted file]
target/linux/bcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch [deleted file]
target/linux/bcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch [deleted file]
target/linux/bcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch [deleted file]
target/linux/bcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch [deleted file]
target/linux/bcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch [deleted file]
target/linux/bcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch [deleted file]
target/linux/bcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch [deleted file]
target/linux/bcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch [deleted file]
target/linux/bcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch [deleted file]
target/linux/bcm63xx/patches-4.14/427-boards_probe_switch.patch [deleted file]
target/linux/bcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch [deleted file]
target/linux/bcm63xx/patches-4.14/500-board-D4PW.patch [deleted file]
target/linux/bcm63xx/patches-4.14/501-board-NB4.patch [deleted file]
target/linux/bcm63xx/patches-4.14/502-board-96338W2_E7T.patch [deleted file]
target/linux/bcm63xx/patches-4.14/503-board-CPVA642.patch [deleted file]
target/linux/bcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch [deleted file]
target/linux/bcm63xx/patches-4.14/505-board_spw500v.patch [deleted file]
target/linux/bcm63xx/patches-4.14/506-board_gw6200_gw6000.patch [deleted file]
target/linux/bcm63xx/patches-4.14/507-board-MAGIC.patch [deleted file]
target/linux/bcm63xx/patches-4.14/508-board_hw553.patch [deleted file]
target/linux/bcm63xx/patches-4.14/509-board_rta1320_16m.patch [deleted file]
target/linux/bcm63xx/patches-4.14/510-board_spw303v.patch [deleted file]
target/linux/bcm63xx/patches-4.14/511-board_V2500V.patch [deleted file]
target/linux/bcm63xx/patches-4.14/512-board_BTV2110.patch [deleted file]
target/linux/bcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch [deleted file]
target/linux/bcm63xx/patches-4.14/514-board_ct536_ct5621.patch [deleted file]
target/linux/bcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch [deleted file]
target/linux/bcm63xx/patches-4.14/516-board_96348A-122.patch [deleted file]
target/linux/bcm63xx/patches-4.14/519_board_CPVA502plus.patch [deleted file]
target/linux/bcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch [deleted file]
target/linux/bcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch [deleted file]
target/linux/bcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch [deleted file]
target/linux/bcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch [deleted file]
target/linux/bcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch [deleted file]
target/linux/bcm63xx/patches-4.14/525-board_96348w3.patch [deleted file]
target/linux/bcm63xx/patches-4.14/526-board_CT6373-1.patch [deleted file]
target/linux/bcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch [deleted file]
target/linux/bcm63xx/patches-4.14/528-board_nb6.patch [deleted file]
target/linux/bcm63xx/patches-4.14/529-board_fast2604.patch [deleted file]
target/linux/bcm63xx/patches-4.14/530-board_A4001N1.patch [deleted file]
target/linux/bcm63xx/patches-4.14/531-board_AR-5387un.patch [deleted file]
target/linux/bcm63xx/patches-4.14/532-board_AR-5381u.patch [deleted file]
target/linux/bcm63xx/patches-4.14/533-board_rta770bw.patch [deleted file]
target/linux/bcm63xx/patches-4.14/534-board_hw556.patch [deleted file]
target/linux/bcm63xx/patches-4.14/535-board_rta770w.patch [deleted file]
target/linux/bcm63xx/patches-4.14/536-board_fast2704.patch [deleted file]
target/linux/bcm63xx/patches-4.14/537-board_fast2504n.patch [deleted file]
target/linux/bcm63xx/patches-4.14/555-board_96318ref.patch [deleted file]
target/linux/bcm63xx/patches-4.14/556-board_96318ref_p300.patch [deleted file]
target/linux/bcm63xx/patches-4.14/557-board_bcm963269bhr.patch [deleted file]
target/linux/bcm63xx/patches-4.14/558-board_AR1004G.patch [deleted file]
target/linux/bcm63xx/patches-4.14/559-board_vw6339gu.patch [deleted file]
target/linux/bcm63xx/patches-4.14/560-board_963268gu_p300.patch [deleted file]
target/linux/bcm63xx/patches-4.14/561-board_WAP-5813n.patch [deleted file]
target/linux/bcm63xx/patches-4.14/562-board_VR-3025u.patch [deleted file]
target/linux/bcm63xx/patches-4.14/563-board_VR-3025un.patch [deleted file]
target/linux/bcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch [deleted file]
target/linux/bcm63xx/patches-4.14/565-board_hw520.patch [deleted file]
target/linux/bcm63xx/patches-4.14/566-board_A4001N.patch [deleted file]
target/linux/bcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch [deleted file]
target/linux/bcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch [deleted file]
target/linux/bcm63xx/patches-4.14/569-board_homehub2a.patch [deleted file]
target/linux/bcm63xx/patches-4.14/570-board_HG655b.patch [deleted file]
target/linux/bcm63xx/patches-4.14/571-board_fast2704n.patch [deleted file]
target/linux/bcm63xx/patches-4.14/572-board_VR-3026e.patch [deleted file]
target/linux/bcm63xx/patches-4.14/573-board_R5010UNv2.patch [deleted file]
target/linux/bcm63xx/patches-4.14/574-board_HG622.patch [deleted file]
target/linux/bcm63xx/patches-4.14/575-board_EVG2000.patch [deleted file]
target/linux/bcm63xx/patches-4.14/576-board_AV4202N.patch [deleted file]
target/linux/bcm63xx/patches-4.14/577-board_VH4032N.patch [deleted file]
target/linux/bcm63xx/patches-4.14/578-board_R1000H.patch [deleted file]
target/linux/bcm63xx/patches-4.14/579-board_AR-5315u.patch [deleted file]
target/linux/bcm63xx/patches-4.14/580-board_AD1018.patch [deleted file]
target/linux/bcm63xx/patches-4.14/598-board_sr102.patch [deleted file]
target/linux/bcm63xx/patches-4.14/800-wl_exports.patch [deleted file]
target/linux/bcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch [deleted file]
target/linux/bcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch [deleted file]
target/linux/bcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch [deleted file]
target/linux/bcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch [deleted file]

diff --git a/target/linux/bcm63xx/config-4.14 b/target/linux/bcm63xx/config-4.14
deleted file mode 100644 (file)
index 2a00195..0000000
+++ /dev/null
@@ -1,281 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
-# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BCM6345_EXT_IRQ=y
-CONFIG_BCM6345_PERIPH_IRQ=y
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_3368=y
-CONFIG_BCM63XX_CPU_6318=y
-CONFIG_BCM63XX_CPU_63268=y
-CONFIG_BCM63XX_CPU_6328=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_CPU_6362=y
-CONFIG_BCM63XX_CPU_6368=y
-CONFIG_BCM63XX_EHCI=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_OHCI=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-# CONFIG_BCMA_DEBUG is not set
-# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
-# CONFIG_BCMA_DRIVER_MIPS is not set
-CONFIG_BCMA_DRIVER_PCI=y
-# CONFIG_BCMA_DRIVER_PCI_HOSTMODE is not set
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-# CONFIG_BCMA_HOST_SOC is not set
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOARD_BCM63XX_DT=y
-CONFIG_BOARD_BCM963XX=y
-CONFIG_BOARD_LIVEBOX=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_BMIPS=y
-CONFIG_CPU_BMIPS32_3300=y
-CONFIG_CPU_BMIPS4350=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_CPUFREQ=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_BCM63XX=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM63XX=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_LEDS_BCM6328=y
-CONFIG_LEDS_BCM6358=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_EXTERNAL_TIMER=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_L1_CACHE_SHIFT_4=y
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM63XX_PARTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PARSER_IMAGETAG=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-# CONFIG_PCIEAER is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM6318=y
-CONFIG_PINCTRL_BCM63268=y
-CONFIG_PINCTRL_BCM6328=y
-CONFIG_PINCTRL_BCM6348=y
-CONFIG_PINCTRL_BCM6358=y
-CONFIG_PINCTRL_BCM6362=y
-CONFIG_PINCTRL_BCM6368=y
-CONFIG_PINCTRL_BCM63XX=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RELAY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM63XX=y
-CONFIG_SPI_BCM63XX_HSSPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SRCU=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-CONFIG_SWCONFIG_B53_MMAP_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-CONFIG_SWCONFIG_B53_SPI_DRIVER=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SWPHY=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_BMIPS4350=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WEAK_ORDERING=y
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch
deleted file mode 100644 (file)
index b6d755d..0000000
+++ /dev/null
@@ -1,210 +0,0 @@
-From e74caf41aec5338b8cbbd0a1483650848f16f532 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:23:47 +0200
-Subject: [PATCH V2 1/8] MIPS: BCM63XX: add clkdev lookup support
-
-Enable clkdev lookup support to allow us providing clocks under
-different names to devices more easily, so we don't need to care
-about clock name clashes anymore.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/Kconfig       |   1 +
- arch/mips/bcm63xx/clk.c | 150 +++++++++++++++++++++++++++++++++++++-----------
- 2 files changed, 116 insertions(+), 35 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -279,6 +279,7 @@ config BCM63XX
-       select GPIOLIB
-       select HAVE_CLK
-       select MIPS_L1_CACHE_SHIFT_4
-+      select CLKDEV_LOOKUP
-       help
-        Support for BCM63XX based boards
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -11,6 +11,7 @@
- #include <linux/mutex.h>
- #include <linux/err.h>
- #include <linux/clk.h>
-+#include <linux/clkdev.h>
- #include <linux/delay.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_io.h>
-@@ -359,44 +360,103 @@ long clk_round_rate(struct clk *clk, uns
- }
- EXPORT_SYMBOL_GPL(clk_round_rate);
--struct clk *clk_get(struct device *dev, const char *id)
--{
--      if (!strcmp(id, "enet0"))
--              return &clk_enet0;
--      if (!strcmp(id, "enet1"))
--              return &clk_enet1;
--      if (!strcmp(id, "enetsw"))
--              return &clk_enetsw;
--      if (!strcmp(id, "ephy"))
--              return &clk_ephy;
--      if (!strcmp(id, "usbh"))
--              return &clk_usbh;
--      if (!strcmp(id, "usbd"))
--              return &clk_usbd;
--      if (!strcmp(id, "spi"))
--              return &clk_spi;
--      if (!strcmp(id, "hsspi"))
--              return &clk_hsspi;
--      if (!strcmp(id, "xtm"))
--              return &clk_xtm;
--      if (!strcmp(id, "periph"))
--              return &clk_periph;
--      if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
--              return &clk_pcm;
--      if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
--              return &clk_ipsec;
--      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
--              return &clk_pcie;
--      return ERR_PTR(-ENOENT);
--}
--
--EXPORT_SYMBOL(clk_get);
--
--void clk_put(struct clk *clk)
--{
--}
--
--EXPORT_SYMBOL(clk_put);
-+static struct clk_lookup bcm3368_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-+      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-+      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "pcm", &clk_pcm),
-+};
-+
-+static struct clk_lookup bcm6328_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+};
-+
-+static struct clk_lookup bcm6338_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-+      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-+      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+};
-+
-+static struct clk_lookup bcm6345_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-+      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-+      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+};
-+
-+static struct clk_lookup bcm6348_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-+      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-+      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+};
-+
-+static struct clk_lookup bcm6358_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-+      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-+      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "pcm", &clk_pcm),
-+};
-+
-+static struct clk_lookup bcm6362_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+      CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
-+};
-+
-+static struct clk_lookup bcm6368_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "xtm", &clk_xtm),
-+      CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
-+};
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
-@@ -404,11 +464,31 @@ EXPORT_SYMBOL(clk_put);
- static int __init bcm63xx_clk_init(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM3368_CPU_ID:
-+              clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
-+              break;
-       case BCM6328_CPU_ID:
-               clk_hsspi.rate = HSSPI_PLL_HZ_6328;
-+              clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
-+              break;
-+      case BCM6338_CPU_ID:
-+              clkdev_add_table(bcm6338_clks, ARRAY_SIZE(bcm6338_clks));
-+              break;
-+      case BCM6345_CPU_ID:
-+              clkdev_add_table(bcm6345_clks, ARRAY_SIZE(bcm6345_clks));
-+              break;
-+      case BCM6348_CPU_ID:
-+              clkdev_add_table(bcm6348_clks, ARRAY_SIZE(bcm6348_clks));
-+              break;
-+      case BCM6358_CPU_ID:
-+              clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks));
-               break;
-       case BCM6362_CPU_ID:
-               clk_hsspi.rate = HSSPI_PLL_HZ_6362;
-+              clkdev_add_table(bcm6362_clks, ARRAY_SIZE(bcm6362_clks));
-+              break;
-+      case BCM6368_CPU_ID:
-+              clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
-               break;
-       }
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch
deleted file mode 100644 (file)
index 2be6f4c..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-From d0322bf7bebe87012b4f95c85be6b5ba0cb6f344 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:31:44 +0200
-Subject: [PATCH V2 2/8] MIPS: BCM63XX: provide periph clock as refclk for uart
-
-Add a lookup as "refclk" to describe its function for the uarts.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -363,6 +363,8 @@ EXPORT_SYMBOL_GPL(clk_round_rate);
- static struct clk_lookup bcm3368_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -376,6 +378,8 @@ static struct clk_lookup bcm3368_clks[]
- static struct clk_lookup bcm6328_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -387,6 +391,7 @@ static struct clk_lookup bcm6328_clks[]
- static struct clk_lookup bcm6338_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -399,6 +404,7 @@ static struct clk_lookup bcm6338_clks[]
- static struct clk_lookup bcm6345_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -411,6 +417,7 @@ static struct clk_lookup bcm6345_clks[]
- static struct clk_lookup bcm6348_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -423,6 +430,8 @@ static struct clk_lookup bcm6348_clks[]
- static struct clk_lookup bcm6358_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -436,6 +445,8 @@ static struct clk_lookup bcm6358_clks[]
- static struct clk_lookup bcm6362_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -449,6 +460,8 @@ static struct clk_lookup bcm6362_clks[]
- static struct clk_lookup bcm6368_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch
deleted file mode 100644 (file)
index 986732e..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-From 8124706e6040b1cf0d2dd3a05759df6cec4bddfb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:32:37 +0200
-Subject: [PATCH V2 3/8] tty/bcm63xx_uart: use refclk for the expected clock
- name
-
-We now have the clock available under refclk, so use that.
-
-Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/tty/serial/bcm63xx_uart.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/tty/serial/bcm63xx_uart.c
-+++ b/drivers/tty/serial/bcm63xx_uart.c
-@@ -847,7 +847,7 @@ static int bcm_uart_probe(struct platfor
-               return -ENODEV;
-       clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) :
--                                clk_get(&pdev->dev, "periph");
-+                                clk_get(&pdev->dev, "refclk");
-       if (IS_ERR(clk))
-               return -ENODEV;
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch
deleted file mode 100644 (file)
index 2f82830..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-From 317f8659bba01b307cbe4e9902d4e3d333fd7164 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:39:17 +0200
-Subject: [PATCH V2 4/8] tty/bcm63xx_uart: allow naming clock in device tree
-
-Codify using a named clock for the refclk of the uart. This makes it
-easier if we might need to add a gating clock (like present on the
-BCM6345).
-
-Acked-by: Rob Herring <robh@kernel.org>
-Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt | 6 ++++++
- drivers/tty/serial/bcm63xx_uart.c                              | 6 ++++--
- 2 files changed, 10 insertions(+), 2 deletions(-)
-
---- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
-+++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
-@@ -11,6 +11,11 @@ Required properties:
- - clocks: Clock driving the hardware; used to figure out the baud rate
-   divisor.
-+
-+Optional properties:
-+
-+- clock-names: Should be "refclk".
-+
- Example:
-       uart0: serial@14e00520 {
-@@ -19,6 +24,7 @@ Example:
-               interrupt-parent = <&periph_intc>;
-               interrupts = <2>;
-               clocks = <&periph_clk>;
-+              clock-names = "refclk";
-       };
-       clocks {
---- a/drivers/tty/serial/bcm63xx_uart.c
-+++ b/drivers/tty/serial/bcm63xx_uart.c
-@@ -846,8 +846,10 @@ static int bcm_uart_probe(struct platfor
-       if (!res_irq)
-               return -ENODEV;
--      clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) :
--                                clk_get(&pdev->dev, "refclk");
-+      clk = clk_get(&pdev->dev, "refclk");
-+      if (IS_ERR(clk) && pdev->dev.of_node)
-+              clk = of_clk_get(pdev->dev.of_node, 0);
-+
-       if (IS_ERR(clk))
-               return -ENODEV;
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch
deleted file mode 100644 (file)
index a69998d..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From cb86630379c8f3432c916d62045b5176f17f4123 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:57:21 +0200
-Subject: [PATCH V2 6/8] MIPS: BCM63XX: move the HSSPI PLL HZ into its own
- clock
-
-Split up the HSSPL clock into rate and a gate clock, to more closely
-match the actual hardware.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -248,6 +248,10 @@ static struct clk clk_hsspi = {
-       .set    = hsspi_set,
- };
-+/*
-+ * HSSPI PLL
-+ */
-+static struct clk clk_hsspi_pll;
- /*
-  * XTM clock
-@@ -380,6 +384,7 @@ static struct clk_lookup bcm6328_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -447,6 +452,7 @@ static struct clk_lookup bcm6362_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -481,7 +487,7 @@ static int __init bcm63xx_clk_init(void)
-               clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
-               break;
-       case BCM6328_CPU_ID:
--              clk_hsspi.rate = HSSPI_PLL_HZ_6328;
-+              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
-               clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
-               break;
-       case BCM6338_CPU_ID:
-@@ -497,7 +503,7 @@ static int __init bcm63xx_clk_init(void)
-               clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks));
-               break;
-       case BCM6362_CPU_ID:
--              clk_hsspi.rate = HSSPI_PLL_HZ_6362;
-+              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362;
-               clkdev_add_table(bcm6362_clks, ARRAY_SIZE(bcm6362_clks));
-               break;
-       case BCM6368_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch
deleted file mode 100644 (file)
index eb30b2d..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
-From 6d43970a2eb1c7ee88caf7328d201f9c001262e9 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:48:41 +0200
-Subject: [PATCH V2 7/8] MIPS: BCM63XX: provide enet clocks as "enet" to the
- ethernet devices
-
-Add lookups to provide the appropriate enetX clocks as just "enet" to
-the ethernet devices.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -377,6 +377,8 @@ static struct clk_lookup bcm3368_clks[]
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-       CLKDEV_INIT(NULL, "pcm", &clk_pcm),
-+      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
-+      CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
- };
- static struct clk_lookup bcm6328_clks[] = {
-@@ -404,6 +406,7 @@ static struct clk_lookup bcm6338_clks[]
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
- };
- static struct clk_lookup bcm6345_clks[] = {
-@@ -417,6 +420,7 @@ static struct clk_lookup bcm6345_clks[]
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
- };
- static struct clk_lookup bcm6348_clks[] = {
-@@ -430,6 +434,8 @@ static struct clk_lookup bcm6348_clks[]
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
-+      CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet_misc),
- };
- static struct clk_lookup bcm6358_clks[] = {
-@@ -445,6 +451,8 @@ static struct clk_lookup bcm6358_clks[]
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-       CLKDEV_INIT(NULL, "pcm", &clk_pcm),
-+      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
-+      CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
- };
- static struct clk_lookup bcm6362_clks[] = {
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch
deleted file mode 100644 (file)
index b5b36e5..0000000
+++ /dev/null
@@ -1,105 +0,0 @@
-From b98027285bd1fa95da0645a4234a5fc1f1a83f92 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 26 Feb 2017 11:59:52 +0100
-Subject: [PATCH V2 8/8] MIPS: BCM63XX: split out swpkt_sar/usb clocks
-
-Make the secondary switch clocks their own clocks. This allows proper
-enable reference counting between SAR/XTM and the main switch clocks,
-and controlling them individually from drivers.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 61 +++++++++++++++++++++++++++++++++++++++++--------
- 1 file changed, 51 insertions(+), 10 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -122,21 +122,56 @@ static struct clk clk_ephy = {
- };
- /*
-+ * Ethernet switch SAR clock
-+ */
-+static void swpkt_sar_set(struct clk *clk, int enable)
-+{
-+      if (BCMCPU_IS_6368())
-+              bcm_hwclock_set(CKCTL_6368_SWPKT_SAR_EN, enable);
-+      else
-+              return;
-+}
-+
-+static struct clk clk_swpkt_sar = {
-+      .set    = swpkt_sar_set,
-+};
-+
-+/*
-+ * Ethernet switch USB clock
-+ */
-+static void swpkt_usb_set(struct clk *clk, int enable)
-+{
-+      if (BCMCPU_IS_6368())
-+              bcm_hwclock_set(CKCTL_6368_SWPKT_USB_EN, enable);
-+      else
-+              return;
-+}
-+
-+static struct clk clk_swpkt_usb = {
-+      .set    = swpkt_usb_set,
-+};
-+
-+/*
-  * Ethernet switch clock
-  */
- static void enetsw_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
--      else if (BCMCPU_IS_6368())
--              bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
--                              CKCTL_6368_SWPKT_USB_EN |
--                              CKCTL_6368_SWPKT_SAR_EN,
--                              enable);
--      else
-+      } else if (BCMCPU_IS_6368()) {
-+              if (enable) {
-+                      clk_enable_unlocked(&clk_swpkt_sar);
-+                      clk_enable_unlocked(&clk_swpkt_usb);
-+              } else {
-+                      clk_disable_unlocked(&clk_swpkt_usb);
-+                      clk_disable_unlocked(&clk_swpkt_sar);
-+              }
-+              bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable);
-+      } else {
-               return;
-+      }
-       if (enable) {
-               /* reset switch core afer clock change */
-@@ -261,8 +296,12 @@ static void xtm_set(struct clk *clk, int
-       if (!BCMCPU_IS_6368())
-               return;
--      bcm_hwclock_set(CKCTL_6368_SAR_EN |
--                      CKCTL_6368_SWPKT_SAR_EN, enable);
-+      if (enable)
-+              clk_enable_unlocked(&clk_swpkt_sar);
-+      else
-+              clk_disable_unlocked(&clk_swpkt_sar);
-+
-+      bcm_hwclock_set(CKCTL_6368_SAR_EN, enable);
-       if (enable) {
-               /* reset sar core afer clock change */
-@@ -451,6 +490,8 @@ static struct clk_lookup bcm6358_clks[]
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-       CLKDEV_INIT(NULL, "pcm", &clk_pcm),
-+      CLKDEV_INIT(NULL, "swpkt_sar", &clk_swpkt_sar),
-+      CLKDEV_INIT(NULL, "swpkt_usb", &clk_swpkt_usb),
-       CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
-       CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
- };
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch
deleted file mode 100644 (file)
index b339580..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 71710bb6cbc82f411a4e5faafa0c3178e48e7137 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 30 May 2017 13:31:45 +0200
-Subject: [PATCH 3/6] bcm63xx_enet: do not rely on probe order
-
-Do not rely on the shared device being probed before the enet(sw)
-devices. This makes it easier to eventually move out the shared
-device as a dma controller driver (what it should be).
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 9 ++-------
- 1 file changed, 2 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1723,10 +1723,8 @@ static int bcm_enet_probe(struct platfor
-       const char *clk_name;
-       int i, ret;
--      /* stop if shared driver failed, assume driver->probe will be
--       * called in the same order we register devices (correct ?) */
-       if (!bcm_enet_shared_base[0])
--              return -ENODEV;
-+              return -EPROBE_DEFER;
-       res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-       res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-@@ -2701,11 +2699,8 @@ static int bcm_enetsw_probe(struct platf
-       struct resource *res_mem;
-       int ret, irq_rx, irq_tx;
--      /* stop if shared driver failed, assume driver->probe will be
--       * called in the same order we register devices (correct ?)
--       */
-       if (!bcm_enet_shared_base[0])
--              return -ENODEV;
-+              return -EPROBE_DEFER;
-       res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       irq_rx = platform_get_irq(pdev, 0);
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch
deleted file mode 100644 (file)
index cf0971c..0000000
+++ /dev/null
@@ -1,150 +0,0 @@
-From 179a445ae4ef36ec44f4aea18e5f42d21334d186 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 25 Feb 2017 12:39:25 +0100
-Subject: [PATCH 4/6] bcm63xx_enet: use managed functions for clock/ioremap
-
-Use managed functions where possible to reduce the amount of resource
-handling on error and remove paths.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 54 +++++++---------------------
- 1 file changed, 12 insertions(+), 42 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1768,14 +1768,14 @@ static int bcm_enet_probe(struct platfor
-               clk_name = "enet1";
-       }
--      priv->mac_clk = clk_get(&pdev->dev, clk_name);
-+      priv->mac_clk = devm_clk_get(&pdev->dev, clk_name);
-       if (IS_ERR(priv->mac_clk)) {
-               ret = PTR_ERR(priv->mac_clk);
-               goto out;
-       }
-       ret = clk_prepare_enable(priv->mac_clk);
-       if (ret)
--              goto out_put_clk_mac;
-+              goto out;
-       /* initialize default and fetch platform data */
-       priv->rx_ring_size = BCMENET_DEF_RX_DESC;
-@@ -1803,7 +1803,7 @@ static int bcm_enet_probe(struct platfor
-       if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
-               /* using internal PHY, enable clock */
--              priv->phy_clk = clk_get(&pdev->dev, "ephy");
-+              priv->phy_clk = devm_clk_get(&pdev->dev, "ephy");
-               if (IS_ERR(priv->phy_clk)) {
-                       ret = PTR_ERR(priv->phy_clk);
-                       priv->phy_clk = NULL;
-@@ -1811,7 +1811,7 @@ static int bcm_enet_probe(struct platfor
-               }
-               ret = clk_prepare_enable(priv->phy_clk);
-               if (ret)
--                      goto out_put_clk_phy;
-+                      goto out_disable_clk_mac;
-       }
-       /* do minimal hardware init to be able to probe mii bus */
-@@ -1908,14 +1908,8 @@ out_uninit_hw:
-       if (priv->phy_clk)
-               clk_disable_unprepare(priv->phy_clk);
--out_put_clk_phy:
--      if (priv->phy_clk)
--              clk_put(priv->phy_clk);
--
- out_disable_clk_mac:
-       clk_disable_unprepare(priv->mac_clk);
--out_put_clk_mac:
--      clk_put(priv->mac_clk);
- out:
-       free_netdev(dev);
-       return ret;
-@@ -1951,12 +1945,10 @@ static int bcm_enet_remove(struct platfo
-       }
-       /* disable hw block clocks */
--      if (priv->phy_clk) {
-+      if (priv->phy_clk)
-               clk_disable_unprepare(priv->phy_clk);
--              clk_put(priv->phy_clk);
--      }
-+
-       clk_disable_unprepare(priv->mac_clk);
--      clk_put(priv->mac_clk);
-       free_netdev(dev);
-       return 0;
-@@ -2739,26 +2731,20 @@ static int bcm_enetsw_probe(struct platf
-       if (ret)
-               goto out;
--      if (!request_mem_region(res_mem->start, resource_size(res_mem),
--                              "bcm63xx_enetsw")) {
--              ret = -EBUSY;
-+      priv->base = devm_ioremap_resource(&pdev->dev, res_mem);
-+      if (IS_ERR(priv->base)) {
-+              ret = PTR_ERR(priv->base);
-               goto out;
-       }
--      priv->base = ioremap(res_mem->start, resource_size(res_mem));
--      if (priv->base == NULL) {
--              ret = -ENOMEM;
--              goto out_release_mem;
--      }
--
--      priv->mac_clk = clk_get(&pdev->dev, "enetsw");
-+      priv->mac_clk = devm_clk_get(&pdev->dev, "enetsw");
-       if (IS_ERR(priv->mac_clk)) {
-               ret = PTR_ERR(priv->mac_clk);
--              goto out_unmap;
-+              goto out;
-       }
-       ret = clk_prepare_enable(priv->mac_clk);
-       if (ret)
--              goto out_put_clk;
-+              goto out;
-       priv->rx_chan = 0;
-       priv->tx_chan = 1;
-@@ -2790,15 +2776,6 @@ static int bcm_enetsw_probe(struct platf
- out_disable_clk:
-       clk_disable_unprepare(priv->mac_clk);
--
--out_put_clk:
--      clk_put(priv->mac_clk);
--
--out_unmap:
--      iounmap(priv->base);
--
--out_release_mem:
--      release_mem_region(res_mem->start, resource_size(res_mem));
- out:
-       free_netdev(dev);
-       return ret;
-@@ -2810,20 +2787,13 @@ static int bcm_enetsw_remove(struct plat
- {
-       struct bcm_enet_priv *priv;
-       struct net_device *dev;
--      struct resource *res;
-       /* stop netdevice */
-       dev = platform_get_drvdata(pdev);
-       priv = netdev_priv(dev);
-       unregister_netdev(dev);
--      /* release device resources */
--      iounmap(priv->base);
--      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--      release_mem_region(res->start, resource_size(res));
--
-       clk_disable_unprepare(priv->mac_clk);
--      clk_put(priv->mac_clk);
-       free_netdev(dev);
-       return 0;
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch
deleted file mode 100644 (file)
index 34fdd5c..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 555baec974ede81e616ca88ac6d3fca09239368f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 18 Jul 2017 13:18:01 +0200
-Subject: [PATCH 5/6] bcm63xx_enet: drop unneeded NULL phy_clk check
-
-clk_disable and clk_unprepare are NULL-safe, so need to duplicate the
-NULL check of the functions.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1905,8 +1905,7 @@ out_free_mdio:
- out_uninit_hw:
-       /* turn off mdc clock */
-       enet_writel(priv, 0, ENET_MIISC_REG);
--      if (priv->phy_clk)
--              clk_disable_unprepare(priv->phy_clk);
-+      clk_disable_unprepare(priv->phy_clk);
- out_disable_clk_mac:
-       clk_disable_unprepare(priv->mac_clk);
-@@ -1945,9 +1944,7 @@ static int bcm_enet_remove(struct platfo
-       }
-       /* disable hw block clocks */
--      if (priv->phy_clk)
--              clk_disable_unprepare(priv->phy_clk);
--
-+      clk_disable_unprepare(priv->phy_clk);
-       clk_disable_unprepare(priv->mac_clk);
-       free_netdev(dev);
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch
deleted file mode 100644 (file)
index 41a6b57..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-From 77364ce98037972fb1c57d0ee0418eb1c2b26521 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 29 May 2017 13:11:14 +0200
-Subject: [PATCH 6/6] bcm63xx_enet: remove unneeded include
-
-We don't use anyhing from that file, so drop it.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -9,7 +9,6 @@
- #include <linux/platform_device.h>
- #include <bcm63xx_regs.h>
--#include <bcm63xx_irq.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_iudma.h>
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch
deleted file mode 100644 (file)
index c489001..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-From 943b0832e0cf3afe5bd40ffb1885d06106122c5d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:49:49 +0200
-Subject: [PATCH 1/4] bcm63xx_enet: just use "enet" as the clock name
-
-Now that we have the individual clocks available as "enet" we
-don't need to rely on the device id for them anymore.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 +----
- 1 file changed, 1 insertion(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1720,7 +1720,6 @@ static int bcm_enet_probe(struct platfor
-       struct bcm63xx_enet_platform_data *pd;
-       struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
-       struct mii_bus *bus;
--      const char *clk_name;
-       int i, ret;
-       if (!bcm_enet_shared_base[0])
-@@ -1761,14 +1760,12 @@ static int bcm_enet_probe(struct platfor
-       if (priv->mac_id == 0) {
-               priv->rx_chan = 0;
-               priv->tx_chan = 1;
--              clk_name = "enet0";
-       } else {
-               priv->rx_chan = 2;
-               priv->tx_chan = 3;
--              clk_name = "enet1";
-       }
--      priv->mac_clk = devm_clk_get(&pdev->dev, clk_name);
-+      priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
-       if (IS_ERR(priv->mac_clk)) {
-               ret = PTR_ERR(priv->mac_clk);
-               goto out;
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch
deleted file mode 100644 (file)
index f3ddd74..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-From b7d1d1f345bb3b25c360c1df812d98866e2ee7fb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 30 Sep 2017 13:50:03 +0200
-Subject: [PATCH 2/4] bcm63xx_enet: use platform data for dma channel numbers
-
-To reduce the reliance on device ids, pass the dma channel numbers to
-the enet devices as platform data.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-enet.c                          |  8 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h |  4 ++++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c          | 11 ++---------
- 3 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -265,6 +265,14 @@ int __init bcm63xx_enet_register(int uni
-               dpd->dma_chan_width = ENETDMA_CHAN_WIDTH;
-       }
-+      if (unit == 0) {
-+              dpd->rx_chan = 0;
-+              dpd->tx_chan = 1;
-+      } else {
-+              dpd->rx_chan = 2;
-+              dpd->tx_chan = 3;
-+      }
-+
-       ret = platform_device_register(pdev);
-       if (ret)
-               return ret;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -55,6 +55,10 @@ struct bcm63xx_enet_platform_data {
-       /* DMA descriptor shift */
-       unsigned int dma_desc_shift;
-+
-+      /* dma channel ids */
-+      int rx_chan;
-+      int tx_chan;
- };
- /*
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1756,15 +1756,6 @@ static int bcm_enet_probe(struct platfor
-       priv->irq_tx = res_irq_tx->start;
-       priv->mac_id = pdev->id;
--      /* get rx & tx dma channel id for this mac */
--      if (priv->mac_id == 0) {
--              priv->rx_chan = 0;
--              priv->tx_chan = 1;
--      } else {
--              priv->rx_chan = 2;
--              priv->tx_chan = 3;
--      }
--
-       priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
-       if (IS_ERR(priv->mac_clk)) {
-               ret = PTR_ERR(priv->mac_clk);
-@@ -1796,6 +1787,8 @@ static int bcm_enet_probe(struct platfor
-               priv->dma_chan_width = pd->dma_chan_width;
-               priv->dma_has_sram = pd->dma_has_sram;
-               priv->dma_desc_shift = pd->dma_desc_shift;
-+              priv->rx_chan = pd->rx_chan;
-+              priv->tx_chan = pd->tx_chan;
-       }
-       if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch
deleted file mode 100644 (file)
index a656e4f..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-From 8c61608e5dd2e15575c171ee9cd558ddc3b94962 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 17 Dec 2017 12:54:30 +0100
-Subject: [PATCH 3/4] bcm63xx_enet: remove pointless mac_id check
-
-Enabling the ephy clock for mac 1 is harmless, and the actual usage of
-the ephy is not restricted to mac 0, so we might as well remove the
-check.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1791,7 +1791,7 @@ static int bcm_enet_probe(struct platfor
-               priv->tx_chan = pd->tx_chan;
-       }
--      if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
-+      if (priv->has_phy && !priv->use_external_mii) {
-               /* using internal PHY, enable clock */
-               priv->phy_clk = devm_clk_get(&pdev->dev, "ephy");
-               if (IS_ERR(priv->phy_clk)) {
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch
deleted file mode 100644 (file)
index cab9e5a..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-From faea89cd893a1a7af81185f026a64dad603ef72f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 17 Dec 2017 12:58:12 +0100
-Subject: [PATCH 4/4] bcm63xx_enet: use platform device id directly for miibus
- name
-
-Directly use the platform device for generating the miibus name. This removes
-the last user of bcm_enet_priv::mac_id and we can remove the field.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 3 +--
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 3 ---
- 2 files changed, 1 insertion(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1754,7 +1754,6 @@ static int bcm_enet_probe(struct platfor
-       dev->irq = priv->irq = res_irq->start;
-       priv->irq_rx = res_irq_rx->start;
-       priv->irq_tx = res_irq_tx->start;
--      priv->mac_id = pdev->id;
-       priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
-       if (IS_ERR(priv->mac_clk)) {
-@@ -1822,7 +1821,7 @@ static int bcm_enet_probe(struct platfor
-               bus->priv = priv;
-               bus->read = bcm_enet_mdio_read_phylib;
-               bus->write = bcm_enet_mdio_write_phylib;
--              sprintf(bus->id, "%s-%d", pdev->name, priv->mac_id);
-+              sprintf(bus->id, "%s-%d", pdev->name, pdev->id);
-               /* only probe bus where we think the PHY is, because
-                * the mdio read operation return 0 instead of 0xffff
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -193,9 +193,6 @@ struct bcm_enet_mib_counters {
- struct bcm_enet_priv {
--      /* mac id (from platform device id) */
--      int mac_id;
--
-       /* base remapped address of device */
-       void __iomem *base;
diff --git a/target/linux/bcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/bcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
deleted file mode 100644 (file)
index 3974b9b..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:19 +0100
-Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
-
-Knowledge of the clock setup delay should remain at the clock level (so
-it can be clock specific and CPU specific). Add the 100 milliseconds
-required clock delay for the USB host clock when it gets enabled.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c |    5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -214,6 +214,11 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              msleep(100);
- }
- static struct clk clk_usbh = {
diff --git a/target/linux/bcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/bcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
deleted file mode 100644 (file)
index a9651d0..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:20 +0100
-Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
- clock code
-
-This patch adds the required 10 micro seconds delay to the USB device
-clock enable operation. Put this where the correct clock knowledege is,
-which is in the clock code, and remove this delay from the bcm63xx_udc
-gadget driver where it was before.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c          |    5 +++++
- drivers/usb/gadget/bcm63xx_udc.c |    1 -
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -236,6 +236,11 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              udelay(10);
- }
- static struct clk clk_usbd = {
---- a/drivers/usb/gadget/udc/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
-@@ -410,7 +410,6 @@ static inline void set_clocks(struct bcm
-       if (is_enabled) {
-               clk_enable(udc->usbh_clk);
-               clk_enable(udc->usbd_clk);
--              udelay(10);
-       } else {
-               clk_disable(udc->usbd_clk);
-               clk_disable(udc->usbh_clk);
diff --git a/target/linux/bcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/bcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
deleted file mode 100644 (file)
index 7ccb64c..0000000
+++ /dev/null
@@ -1,151 +0,0 @@
-From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:21 +0100
-Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
- register
-
-This patch moves the code touching the USB private register in the
-bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
-preparation for adding support for OHCI and EHCI host controllers which
-will also touch the USB private register.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
- drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
- 4 files changed, 67 insertions(+), 24 deletions(-)
- create mode 100644 arch/mips/bcm63xx/usb-common.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-usbd.o
-+                 dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Broadcom BCM63xx common USB device configuration code
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-+ * Copyright (C) 2012 Broadcom Corporation
-+ *
-+ */
-+#include <linux/export.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_device) {
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      } else {
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      }
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+      if (is_device)
-+              val |= USBH_PRIV_SWAP_USBD_MASK;
-+      else
-+              val &= ~USBH_PRIV_SWAP_USBD_MASK;
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
-+
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_on)
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      else
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -0,0 +1,9 @@
-+#ifndef BCM63XX_USB_PRIV_H_
-+#define BCM63XX_USB_PRIV_H_
-+
-+#include <linux/types.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+
-+#endif /* BCM63XX_USB_PRIV_H_ */
---- a/drivers/usb/gadget/udc/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
-@@ -39,6 +39,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_usb_priv.h>
- #define DRV_MODULE_NAME               "bcm63xx_udc"
-@@ -887,22 +888,7 @@ static void bcm63xx_select_phy_mode(stru
-               bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
-       }
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_device) {
--              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      } else {
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      }
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
--
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
--      if (is_device)
--              val |= USBH_PRIV_SWAP_USBD_MASK;
--      else
--              val &= ~USBH_PRIV_SWAP_USBD_MASK;
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+      bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
- }
- /**
-@@ -916,14 +902,9 @@ static void bcm63xx_select_phy_mode(stru
-  */
- static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
- {
--      u32 val, portmask = BIT(udc->pd->port_no);
-+      u32 portmask = BIT(udc->pd->port_no);
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_on)
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      else
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+      bcm63xx_usb_priv_select_pullup(portmask, is_on);
- }
- /**
diff --git a/target/linux/bcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/bcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
deleted file mode 100644 (file)
index 40bbe08..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
-From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:22 +0100
-Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
- common USB code
-
-This patch updates the common USB code touching the USB private
-registers with the specific bits to properly enable OHCI and EHCI
-controllers on BCM63xx SoCs. As a result we now need to protect access
-to Read Modify Write sequences using a spinlock because we cannot
-guarantee that any of the exposed helper will not be called
-concurrently.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
- 2 files changed, 99 insertions(+)
-
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -5,10 +5,12 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-  * Copyright (C) 2012 Broadcom Corporation
-  *
-  */
-+#include <linux/spinlock.h>
- #include <linux/export.h>
- #include <bcm63xx_cpu.h>
-@@ -16,9 +18,14 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_usb_priv.h>
-+static DEFINE_SPINLOCK(usb_priv_reg_lock);
-+
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_device) {
-@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
-       else
-               val &= ~USBH_PRIV_SWAP_USBD_MASK;
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_on)
-@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
-       else
-               val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
-+
-+/* The following array represents the meaning of the DESC/DATA
-+ * endian swapping with respect to the CPU configured endianness
-+ *
-+ * DATA       ENDN    mmio    descriptor
-+ * 0  0       BE      invalid
-+ * 0  1       BE      LE
-+ * 1  0       BE      BE
-+ * 1  1       BE      invalid
-+ *
-+ * Since BCM63XX SoCs are configured to be in big-endian mode
-+ * we want configuration at line 3.
-+ */
-+void bcm63xx_usb_priv_ohci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6348())
-+              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+      else if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
-+
-+void bcm63xx_usb_priv_ehci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -5,5 +5,7 @@
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+void bcm63xx_usb_priv_ohci_cfg_set(void);
-+void bcm63xx_usb_priv_ehci_cfg_set(void);
- #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/bcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
deleted file mode 100644 (file)
index 64ea473..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:23 +0100
-Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-OHCI controller, and ensures that all relevant OHCI-related
-configuration options are correctly selected. So far, OHCI support is
-available for the 6328, 6348, 6358 and 6358 SoCs.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -7,10 +7,17 @@ config BCM63XX_CPU_3368
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+config BCM63XX_OHCI
-+      bool
-+      select USB_ARCH_HAS_OHCI
-+      select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-+      select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -25,21 +32,25 @@ config BCM63XX_CPU_6348
-       bool "support 6348 CPU"
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/bcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
deleted file mode 100644 (file)
index 8a532fe..0000000
+++ /dev/null
@@ -1,138 +0,0 @@
-From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:24 +0100
-Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
-driven by the ohci-platform generic driver by using specific power
-on/off/suspend callback to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 3 files changed, 101 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-usbd.o usb-common.o
-+                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,94 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ohci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ohci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ohci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ohci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .no_big_frame_no        = 1,
-+      .num_ports              = 1,
-+      .power_on               = bcm63xx_ohci_power_on,
-+      .power_off              = bcm63xx_ohci_power_off,
-+      .power_suspend          = bcm63xx_ohci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+      .name           = "ohci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ohci_resources),
-+      .resource       = ohci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ohci_pdata,
-+              .dma_mask               = &ohci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+      if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-+              return -ENODEV;
-+
-+      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+      ohci_resources[0].end = ohci_resources[0].start;
-+      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+
-+      return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/bcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 6fc5551..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:25 +0100
-Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
- enables it
-
-BCM63XX-based boards can control the registration of the OHCI controller
-by setting their has_ohci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to
-register the OHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -27,6 +27,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -881,6 +882,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-       /* Generate MAC address for WLAN and register our SPROM,
-        * do this after registering enet devices
-        */
diff --git a/target/linux/bcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/bcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
deleted file mode 100644 (file)
index f7311a8..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:26 +0100
-Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-EHCI controller, and ensures that all relevant EHCI-related
-configuration options are selected. So far BCM6328, BCM6358 and BCM6368
-have an EHCI controller and do select this symbol. Update
-drivers/usb/host/Kconfig with BCM63XX to update direct unmet
-dependencies.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |    9 +++++++++
- drivers/usb/host/Kconfig  |    5 +++--
- 2 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -13,11 +13,18 @@ config BCM63XX_OHCI
-       select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-       select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+config BCM63XX_EHCI
-+      bool
-+      select USB_ARCH_HAS_EHCI
-+      select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-+      select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -39,18 +46,21 @@ config BCM63XX_CPU_6358
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/bcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
deleted file mode 100644 (file)
index 7d0a35c..0000000
+++ /dev/null
@@ -1,136 +0,0 @@
-From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:27 +0100
-Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
-driven by the generic ehci-platform driver by using specific power
-on/off/suspend callbacks to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 3 files changed, 99 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,92 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ehci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ehci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ehci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ehci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .power_on               = bcm63xx_ehci_power_on,
-+      .power_off              = bcm63xx_ehci_power_off,
-+      .power_suspend          = bcm63xx_ehci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+      .name           = "ehci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ehci_resources),
-+      .resource       = ehci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ehci_pdata,
-+              .dma_mask               = &ehci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              return 0;
-+
-+      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+      ehci_resources[0].end = ehci_resources[0].start;
-+      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+
-+      return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/bcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 3db82bb..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:28 +0100
-Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
- enables it
-
-BCM63XX-based board can control the registration of the EHCI controller
-by setting their has_ehci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to register
-the EHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -27,6 +27,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -882,6 +883,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-       if (board.has_ohci0)
-               bcm63xx_ohci_register();
diff --git a/target/linux/bcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/bcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
deleted file mode 100644 (file)
index 6d91129..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:30 +0100
-Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
- overcurrent
-
-This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
-does not support proper overcurrent reporting.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
- static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-+      .ignore_oc              = 1,
-       .power_on               = bcm63xx_ehci_power_on,
-       .power_off              = bcm63xx_ehci_power_off,
-       .power_suspend          = bcm63xx_ehci_power_off,
diff --git a/target/linux/bcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch b/target/linux/bcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch
deleted file mode 100644 (file)
index 6a714eb..0000000
+++ /dev/null
@@ -1,481 +0,0 @@
-From a2b8c7f648e168573905818dbb4cb90ca3957c65 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 28 Jun 2017 18:29:43 +0200
-Subject: [PATCH] mtd: bcm63xxpart: move imagetag parsing to its own parser
-
-Move the bcm963xx Image Tag parsing into its own partition parser. This
-Allows reusing the parser with different full flash parsers.
-
-While moving it, rename it to bcm963* to better reflect it isn't chip
-but board specific.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-I tried to keep the code as-is, to keep the changes as small as
-possible.
-
-One side effect is that the partitions get renumbered, which means any
-root=/dev/mtdblock* will now point to the wrong mtd device. But since
-bcm963xx boards will require these hardcoded in the kernel commandline
-anyway this should b a non issue, as it can be easily updated.
-
-There is no such thing in the mips/bcm63xx defconfig, so nothing to update
-there.
-
- drivers/mtd/Kconfig                   |   1 +
- drivers/mtd/bcm63xxpart.c             | 155 ++----------------------
- drivers/mtd/parsers/Kconfig           |  11 ++
- drivers/mtd/parsers/Makefile          |   1 +
- drivers/mtd/parsers/parser_imagetag.c | 214 ++++++++++++++++++++++++++++++++++
- 5 files changed, 235 insertions(+), 147 deletions(-)
- create mode 100644 drivers/mtd/parsers/parser_imagetag.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -163,6 +163,7 @@ config MTD_BCM63XX_PARTS
-       tristate "BCM63XX CFE partitioning support"
-       depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-       select CRC32
-+      select MTD_PARSER_IMAGETAG
-       help
-         This provides partions parsing for BCM63xx devices with CFE
-         bootloaders.
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -93,51 +93,19 @@ static int bcm63xx_read_nvram(struct mtd
-       return 0;
- }
--static int bcm63xx_read_image_tag(struct mtd_info *master, const char *name,
--      loff_t tag_offset, struct bcm_tag *buf)
--{
--      int ret;
--      size_t retlen;
--      u32 computed_crc;
--
--      ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
--      if (ret)
--              return ret;
--
--      if (retlen != sizeof(*buf))
--              return -EIO;
--
--      computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
--                              offsetof(struct bcm_tag, header_crc));
--      if (computed_crc == buf->header_crc) {
--              STR_NULL_TERMINATE(buf->board_id);
--              STR_NULL_TERMINATE(buf->tag_version);
--
--              pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
--                      name, tag_offset, buf->tag_version, buf->board_id);
--
--              return 0;
--      }
--
--      pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
--              name, tag_offset, buf->header_crc, computed_crc);
--      return 1;
--}
-+static const char * const bcm63xx_cfe_part_types[] = {
-+      "bcm963xx-imagetag",
-+      NULL,
-+};
- static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
-       const struct mtd_partition **pparts, struct bcm963xx_nvram *nvram)
- {
--      /* CFE, NVRAM and global Linux are always present */
--      int nrparts = 3, curpart = 0;
--      struct bcm_tag *buf = NULL;
-       struct mtd_partition *parts;
--      int ret;
--      unsigned int rootfsaddr, kerneladdr, spareaddr;
--      unsigned int rootfslen, kernellen, sparelen, totallen;
-+      int nrparts = 3, curpart = 0;
-       unsigned int cfelen, nvramlen;
-       unsigned int cfe_erasesize;
-       int i;
--      bool rootfs_first = false;
-       cfe_erasesize = max_t(uint32_t, master->erasesize,
-                             BCM963XX_CFE_BLOCK_SIZE);
-@@ -146,83 +114,9 @@ static int bcm63xx_parse_cfe_nor_partiti
-       nvramlen = nvram->psi_size * SZ_1K;
-       nvramlen = roundup(nvramlen, cfe_erasesize);
--      buf = vmalloc(sizeof(struct bcm_tag));
--      if (!buf)
--              return -ENOMEM;
--
--      /* Get the tag */
--      ret = bcm63xx_read_image_tag(master, "rootfs", cfelen, buf);
--      if (!ret) {
--              STR_NULL_TERMINATE(buf->flash_image_start);
--              if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
--                              rootfsaddr < BCM963XX_EXTENDED_SIZE) {
--                      pr_err("invalid rootfs address: %*ph\n",
--                              (int)sizeof(buf->flash_image_start),
--                              buf->flash_image_start);
--                      goto invalid_tag;
--              }
--
--              STR_NULL_TERMINATE(buf->kernel_address);
--              if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
--                              kerneladdr < BCM963XX_EXTENDED_SIZE) {
--                      pr_err("invalid kernel address: %*ph\n",
--                              (int)sizeof(buf->kernel_address),
--                              buf->kernel_address);
--                      goto invalid_tag;
--              }
--
--              STR_NULL_TERMINATE(buf->kernel_length);
--              if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
--                      pr_err("invalid kernel length: %*ph\n",
--                              (int)sizeof(buf->kernel_length),
--                              buf->kernel_length);
--                      goto invalid_tag;
--              }
--
--              STR_NULL_TERMINATE(buf->total_length);
--              if (kstrtouint(buf->total_length, 10, &totallen)) {
--                      pr_err("invalid total length: %*ph\n",
--                              (int)sizeof(buf->total_length),
--                              buf->total_length);
--                      goto invalid_tag;
--              }
--
--              kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
--              rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
--              spareaddr = roundup(totallen, master->erasesize) + cfelen;
--
--              if (rootfsaddr < kerneladdr) {
--                      /* default Broadcom layout */
--                      rootfslen = kerneladdr - rootfsaddr;
--                      rootfs_first = true;
--              } else {
--                      /* OpenWrt layout */
--                      rootfsaddr = kerneladdr + kernellen;
--                      rootfslen = spareaddr - rootfsaddr;
--              }
--      } else if (ret > 0) {
--invalid_tag:
--              kernellen = 0;
--              rootfslen = 0;
--              rootfsaddr = 0;
--              spareaddr = cfelen;
--      } else {
--              goto out;
--      }
--      sparelen = master->size - spareaddr - nvramlen;
--
--      /* Determine number of partitions */
--      if (rootfslen > 0)
--              nrparts++;
--
--      if (kernellen > 0)
--              nrparts++;
--
-       parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
--      if (!parts) {
--              ret = -ENOMEM;
--              goto out;
--      }
-+      if (!parts)
-+              return -ENOMEM;
-       /* Start building partition list */
-       parts[curpart].name = "CFE";
-@@ -230,30 +124,6 @@ invalid_tag:
-       parts[curpart].size = cfelen;
-       curpart++;
--      if (kernellen > 0) {
--              int kernelpart = curpart;
--
--              if (rootfslen > 0 && rootfs_first)
--                      kernelpart++;
--              parts[kernelpart].name = "kernel";
--              parts[kernelpart].offset = kerneladdr;
--              parts[kernelpart].size = kernellen;
--              curpart++;
--      }
--
--      if (rootfslen > 0) {
--              int rootfspart = curpart;
--
--              if (kernellen > 0 && rootfs_first)
--                      rootfspart--;
--              parts[rootfspart].name = "rootfs";
--              parts[rootfspart].offset = rootfsaddr;
--              parts[rootfspart].size = rootfslen;
--              if (sparelen > 0  && !rootfs_first)
--                      parts[rootfspart].size += sparelen;
--              curpart++;
--      }
--
-       parts[curpart].name = "nvram";
-       parts[curpart].offset = master->size - nvramlen;
-       parts[curpart].size = nvramlen;
-@@ -263,22 +133,13 @@ invalid_tag:
-       parts[curpart].name = "linux";
-       parts[curpart].offset = cfelen;
-       parts[curpart].size = master->size - cfelen - nvramlen;
-+      parts[curpart].types = bcm63xx_cfe_part_types;
-       for (i = 0; i < nrparts; i++)
-               pr_info("Partition %d is %s offset %llx and length %llx\n", i,
-                       parts[i].name, parts[i].offset, parts[i].size);
--      pr_info("Spare partition is offset %x and length %x\n", spareaddr,
--              sparelen);
--
-       *pparts = parts;
--      ret = 0;
--
--out:
--      vfree(buf);
--
--      if (ret)
--              return ret;
-       return nrparts;
- }
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -1,3 +1,14 @@
-+config MTD_PARSER_IMAGETAG
-+      tristate "Parser for BCM963XX Image Tag format partitions"
-+      depends on BCM63XX || BMIPS || COMPILE_TEST
-+      select CRC32
-+      help
-+        Image Tag is the firmware header used by broadcom on their xDSL line
-+        of devices. It is used to describe the offsets and lengths of kernel
-+        and rootfs partitions.
-+        This driver adds support for parsing a partition with an Image Tag
-+        header and creates up to two partitions, kernel and rootfs.
-+
- config MTD_PARSER_TRX
-       tristate "Parser for TRX format partitions"
-       depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -1 +1,2 @@
-+obj-$(CONFIG_MTD_PARSER_IMAGETAG)     += parser_imagetag.o
- obj-$(CONFIG_MTD_PARSER_TRX)          += parser_trx.o
---- /dev/null
-+++ b/drivers/mtd/parsers/parser_imagetag.c
-@@ -0,0 +1,214 @@
-+/*
-+ * BCM63XX CFE image tag parser
-+ *
-+ * Copyright © 2006-2008  Florian Fainelli <florian@openwrt.org>
-+ *                      Mike Albon <malbon@openwrt.org>
-+ * Copyright © 2009-2010  Daniel Dickinson <openwrt@cshore.neomailbox.net>
-+ * Copyright © 2011-2013  Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <linux/bcm963xx_tag.h>
-+#include <linux/crc32.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/sizes.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+/* Ensure strings read from flash structs are null terminated */
-+#define STR_NULL_TERMINATE(x) \
-+      do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
-+
-+static int bcm963xx_read_imagetag(struct mtd_info *master, const char *name,
-+      loff_t tag_offset, struct bcm_tag *buf)
-+{
-+      int ret;
-+      size_t retlen;
-+      u32 computed_crc;
-+
-+      ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
-+      if (ret)
-+              return ret;
-+
-+      if (retlen != sizeof(*buf))
-+              return -EIO;
-+
-+      computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
-+                              offsetof(struct bcm_tag, header_crc));
-+      if (computed_crc == buf->header_crc) {
-+              STR_NULL_TERMINATE(buf->board_id);
-+              STR_NULL_TERMINATE(buf->tag_version);
-+
-+              pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
-+                      name, tag_offset, buf->tag_version, buf->board_id);
-+
-+              return 0;
-+      }
-+
-+      pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
-+              name, tag_offset, buf->header_crc, computed_crc);
-+      return -EINVAL;
-+}
-+
-+static int bcm963xx_parse_imagetag_partitions(struct mtd_info *master,
-+                                      const struct mtd_partition **pparts,
-+                                      struct mtd_part_parser_data *data)
-+{
-+      /* CFE, NVRAM and global Linux are always present */
-+      int nrparts = 0, curpart = 0;
-+      struct bcm_tag *buf = NULL;
-+      struct mtd_partition *parts;
-+      int ret;
-+      unsigned int rootfsaddr, kerneladdr, spareaddr, offset;
-+      unsigned int rootfslen, kernellen, sparelen, totallen;
-+      int i;
-+      bool rootfs_first = false;
-+
-+      buf = vmalloc(sizeof(struct bcm_tag));
-+      if (!buf)
-+              return -ENOMEM;
-+
-+      /* Get the tag */
-+      ret = bcm963xx_read_imagetag(master, "rootfs", 0, buf);
-+      if (!ret) {
-+              STR_NULL_TERMINATE(buf->flash_image_start);
-+              if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
-+                              rootfsaddr < BCM963XX_EXTENDED_SIZE) {
-+                      pr_err("invalid rootfs address: %*ph\n",
-+                              (int)sizeof(buf->flash_image_start),
-+                              buf->flash_image_start);
-+                      goto out;
-+              }
-+
-+              STR_NULL_TERMINATE(buf->kernel_address);
-+              if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
-+                              kerneladdr < BCM963XX_EXTENDED_SIZE) {
-+                      pr_err("invalid kernel address: %*ph\n",
-+                              (int)sizeof(buf->kernel_address),
-+                              buf->kernel_address);
-+                      goto out;
-+              }
-+
-+              STR_NULL_TERMINATE(buf->kernel_length);
-+              if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
-+                      pr_err("invalid kernel length: %*ph\n",
-+                              (int)sizeof(buf->kernel_length),
-+                              buf->kernel_length);
-+                      goto out;
-+              }
-+
-+              STR_NULL_TERMINATE(buf->total_length);
-+              if (kstrtouint(buf->total_length, 10, &totallen)) {
-+                      pr_err("invalid total length: %*ph\n",
-+                              (int)sizeof(buf->total_length),
-+                              buf->total_length);
-+                      goto out;
-+              }
-+
-+              /*
-+               * Addresses are flash absolute, so convert to partition
-+               * relative addresses. Assume either kernel or rootfs will
-+               * directly follow the image tag.
-+               */
-+              if (rootfsaddr < kerneladdr)
-+                      offset = rootfsaddr - sizeof(struct bcm_tag);
-+              else
-+                      offset = kerneladdr - sizeof(struct bcm_tag);
-+
-+              kerneladdr = kerneladdr - offset;
-+              rootfsaddr = rootfsaddr - offset;
-+              spareaddr = roundup(totallen, master->erasesize);
-+
-+              if (rootfsaddr < kerneladdr) {
-+                      /* default Broadcom layout */
-+                      rootfslen = kerneladdr - rootfsaddr;
-+                      rootfs_first = true;
-+              } else {
-+                      /* OpenWrt layout */
-+                      rootfsaddr = kerneladdr + kernellen;
-+                      rootfslen = spareaddr - rootfsaddr;
-+              }
-+      } else {
-+              goto out;
-+      }
-+      sparelen = master->size - spareaddr;
-+
-+      /* Determine number of partitions */
-+      if (rootfslen > 0)
-+              nrparts++;
-+
-+      if (kernellen > 0)
-+              nrparts++;
-+
-+      parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
-+      if (!parts) {
-+              ret = -ENOMEM;
-+              goto out;
-+      }
-+
-+      /* Start building partition list */
-+      if (kernellen > 0) {
-+              int kernelpart = curpart;
-+
-+              if (rootfslen > 0 && rootfs_first)
-+                      kernelpart++;
-+              parts[kernelpart].name = "kernel";
-+              parts[kernelpart].offset = kerneladdr;
-+              parts[kernelpart].size = kernellen;
-+              curpart++;
-+      }
-+
-+      if (rootfslen > 0) {
-+              int rootfspart = curpart;
-+
-+              if (kernellen > 0 && rootfs_first)
-+                      rootfspart--;
-+              parts[rootfspart].name = "rootfs";
-+              parts[rootfspart].offset = rootfsaddr;
-+              parts[rootfspart].size = rootfslen;
-+              if (sparelen > 0  && !rootfs_first)
-+                      parts[rootfspart].size += sparelen;
-+              curpart++;
-+      }
-+
-+      for (i = 0; i < nrparts; i++)
-+              pr_info("Partition %d is %s offset %llx and length %llx\n", i,
-+                      parts[i].name, parts[i].offset, parts[i].size);
-+
-+      pr_info("Spare partition is offset %x and length %x\n", spareaddr,
-+              sparelen);
-+
-+      *pparts = parts;
-+      ret = 0;
-+
-+out:
-+      vfree(buf);
-+
-+      if (ret)
-+              return ret;
-+
-+      return nrparts;
-+}
-+
-+static struct mtd_part_parser bcm963xx_imagetag_parser = {
-+      .parse_fn = bcm963xx_parse_imagetag_partitions,
-+      .name = "bcm963xx-imagetag",
-+};
-+module_mtd_part_parser(bcm963xx_imagetag_parser);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Daniel Dickinson <openwrt@cshore.neomailbox.net>");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
-+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com");
-+MODULE_DESCRIPTION("MTD parser for BCM963XX CFE Image Tag partitions");
diff --git a/target/linux/bcm63xx/patches-4.14/122-mtd-bcm63xxpart-add-of_match_table.patch b/target/linux/bcm63xx/patches-4.14/122-mtd-bcm63xxpart-add-of_match_table.patch
deleted file mode 100644 (file)
index 9b3f2c4..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From 89cd5efa4a0d342b860a726bb1d382e4db4b96a4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 28 Jun 2017 18:34:42 +0200
-Subject: [PATCH 1/2] mtd: bcm63xxpart: add of_match_table
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/bcm63xxpart.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -34,6 +34,7 @@
- #include <linux/vmalloc.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
- #define BCM963XX_CFE_BLOCK_SIZE               SZ_64K  /* always at least 64KiB */
-@@ -172,9 +173,16 @@ out:
-       return ret;
- };
-+static const struct of_device_id parse_bcm63xx_cfe_match_table[] = {
-+      { .compatible = "brcm,bcm963xx-cfe-nor-partitions" },
-+      {},
-+};
-+MODULE_DEVICE_TABLE(of, parse_bcm63xx_cfe_match_table);
-+
- static struct mtd_part_parser bcm63xx_cfe_parser = {
-       .parse_fn = bcm63xx_parse_cfe_partitions,
-       .name = "bcm63xxpart",
-+      .of_match_table = parse_bcm63xx_cfe_match_table,
- };
- module_mtd_part_parser(bcm63xx_cfe_parser);
diff --git a/target/linux/bcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch b/target/linux/bcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch
deleted file mode 100644 (file)
index 04978b3..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From 3303dd9f5b197cc2efd9cbd7b9b45fc1e510a393 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 28 Jun 2017 18:37:12 +0200
-Subject: [PATCH 2/2] mtd: parser_bcm63xx_imagetag: add of_match_table support
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/parsers/parser_imagetag.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mtd/parsers/parser_imagetag.c
-+++ b/drivers/mtd/parsers/parser_imagetag.c
-@@ -24,6 +24,7 @@
- #include <linux/vmalloc.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
- /* Ensure strings read from flash structs are null terminated */
- #define STR_NULL_TERMINATE(x) \
-@@ -200,9 +201,16 @@ out:
-       return nrparts;
- }
-+static const struct of_device_id parse_bcm963xx_imagetag_match_table[] = {
-+      { .compatible = "brcm,bcm963xx-imagetag" },
-+      {},
-+};
-+MODULE_DEVICE_TABLE(of, parse_bcm963xx_imagetag_match_table);
-+
- static struct mtd_part_parser bcm963xx_imagetag_parser = {
-       .parse_fn = bcm963xx_parse_imagetag_partitions,
-       .name = "bcm963xx-imagetag",
-+      .of_match_table = parse_bcm963xx_imagetag_match_table,
- };
- module_mtd_part_parser(bcm963xx_imagetag_parser);
diff --git a/target/linux/bcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch b/target/linux/bcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch
deleted file mode 100644 (file)
index 53e8932..0000000
+++ /dev/null
@@ -1,226 +0,0 @@
-From ab2f33e35e35905a76204138143875251f3e1088 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:07:42 +0200
-Subject: [PATCH 01/13] pinctrl: add bcm63xx base code
-
-Setup directory and add a helper for bcm63xx pinctrl support.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/Kconfig                   |   1 +
- drivers/pinctrl/Makefile                  |   1 +
- drivers/pinctrl/bcm63xx/Kconfig           |   3 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c | 142 ++++++++++++++++++++++++++++++
- drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h |  14 +++
- 7 files changed, 163 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/Kconfig
- create mode 100644 drivers/pinctrl/bcm63xx/Makefile
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
-
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -351,6 +351,7 @@ config PINCTRL_RK805
- source "drivers/pinctrl/aspeed/Kconfig"
- source "drivers/pinctrl/bcm/Kconfig"
-+source "drivers/pinctrl/bcm63xx/Kconfig"
- source "drivers/pinctrl/berlin/Kconfig"
- source "drivers/pinctrl/freescale/Kconfig"
- source "drivers/pinctrl/intel/Kconfig"
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_RK805)  += pinctrl-r
- obj-$(CONFIG_ARCH_ASPEED)     += aspeed/
- obj-y                         += bcm/
-+obj-y                         += bcm63xx/
- obj-$(CONFIG_PINCTRL_BERLIN)  += berlin/
- obj-y                         += freescale/
- obj-$(CONFIG_X86)             += intel/
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -0,0 +1,3 @@
-+config PINCTRL_BCM63XX
-+      bool
-+      select GPIO_GENERIC
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/device.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/of_irq.h>
-+
-+#include "pinctrl-bcm63xx.h"
-+#include "../core.h"
-+
-+#define BANK_SIZE     sizeof(u32)
-+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
-+
-+#ifdef CONFIG_OF
-+static int bcm63xx_gpio_of_xlate(struct gpio_chip *gc,
-+                               const struct of_phandle_args *gpiospec,
-+                               u32 *flags)
-+{
-+      struct gpio_chip *base = gpiochip_get_data(gc);
-+      int pin = gpiospec->args[0];
-+
-+      if (gc != &base[pin / PINS_PER_BANK])
-+              return -EINVAL;
-+
-+      pin = pin % PINS_PER_BANK;
-+
-+      if (pin >= gc->ngpio)
-+              return -EINVAL;
-+
-+      if (flags)
-+              *flags = gpiospec->args[1];
-+
-+      return pin;
-+}
-+#endif
-+
-+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+      struct gpio_chip *base = gpiochip_get_data(chip);
-+      char irq_name[7]; /* "gpioXX" */
-+
-+      /* FIXME: this is ugly */
-+      sprintf(irq_name, "gpio%d", gpio + PINS_PER_BANK * (chip - base));
-+      return of_irq_get_byname(chip->of_node, irq_name);
-+}
-+
-+static int bcm63xx_setup_gpio(struct device *dev, struct gpio_chip *gc,
-+                            void __iomem *dirout, void __iomem *data,
-+                            size_t sz, int ngpio)
-+
-+{
-+      int banks, chips, i, ret = -EINVAL;
-+
-+      chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
-+      banks = sz / BANK_SIZE;
-+
-+      for (i = 0; i < chips; i++) {
-+              int offset, pins;
-+              int reg_offset;
-+              char *label;
-+
-+              label = devm_kasprintf(dev, GFP_KERNEL, "bcm63xx-gpio.%i", i);
-+              if (!label)
-+                      return -ENOMEM;
-+
-+              offset = i * PINS_PER_BANK;
-+              pins = min_t(int, ngpio - offset, PINS_PER_BANK);
-+
-+              /* the registers are treated like a huge big endian register */
-+              reg_offset = (banks - i - 1) * BANK_SIZE;
-+
-+              ret = bgpio_init(&gc[i], dev, BANK_SIZE, data + reg_offset,
-+                               NULL, NULL, dirout + reg_offset, NULL,
-+                               BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+              if (ret)
-+                      return ret;
-+
-+              gc[i].request = gpiochip_generic_request;
-+              gc[i].free = gpiochip_generic_free;
-+
-+              if (of_get_property(dev->of_node, "interrupt-names", NULL))
-+                      gc[i].to_irq = bcm63xx_gpio_to_irq;
-+
-+#ifdef CONFIG_OF
-+              gc[i].of_gpio_n_cells = 2;
-+              gc[i].of_xlate = bcm63xx_gpio_of_xlate;
-+#endif
-+
-+              gc[i].label = label;
-+              gc[i].ngpio = pins;
-+
-+              devm_gpiochip_add_data(dev, &gc[i], gc);
-+      }
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_setup_pinranges(struct gpio_chip *gc, const char *name,
-+                                  int ngpio)
-+{
-+      int i, chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
-+
-+      for (i = 0; i < chips; i++) {
-+              int offset, pins;
-+
-+              offset = i * PINS_PER_BANK;
-+              pins = min_t(int, ngpio - offset, PINS_PER_BANK);
-+
-+              gpiochip_add_pin_range(&gc[i], name, 0, offset, pins);
-+      }
-+}
-+
-+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
-+                                           struct pinctrl_desc *desc,
-+                                           void *priv, struct gpio_chip *gc,
-+                                           int ngpio)
-+{
-+      struct pinctrl_dev *pctldev;
-+      struct resource *res;
-+      void __iomem *dirout, *data;
-+      size_t sz;
-+      int ret;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirout");
-+      dirout = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(dirout))
-+              return ERR_CAST(dirout);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
-+      data = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(data))
-+              return ERR_CAST(data);
-+
-+      sz = resource_size(res);
-+
-+      ret = bcm63xx_setup_gpio(&pdev->dev, gc, dirout, data, sz, ngpio);
-+      if (ret)
-+              return ERR_PTR(ret);
-+
-+      pctldev = devm_pinctrl_register(&pdev->dev, desc, priv);
-+      if (IS_ERR(pctldev))
-+              return pctldev;
-+
-+      bcm63xx_setup_pinranges(gc, pinctrl_dev_get_devname(pctldev), ngpio);
-+
-+      dev_info(&pdev->dev, "registered at mmio %p\n", dirout);
-+
-+      return pctldev;
-+}
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
-@@ -0,0 +1,14 @@
-+#ifndef __PINCTRL_BCM63XX
-+#define __PINCTRL_BCM63XX
-+
-+#include <linux/kernel.h>
-+#include <linux/gpio.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/platform_device.h>
-+
-+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
-+                                           struct pinctrl_desc *desc,
-+                                           void *priv, struct gpio_chip *gc,
-+                                           int ngpio);
-+
-+#endif
diff --git a/target/linux/bcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 3a2a781..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
-From 4bdd40849632608d5cb7d3a64380cd76e7eea07b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:33:56 +0200
-Subject: [PATCH 02/16] Documentation: add BCM6328 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6328 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6328-pinctrl.txt      | 61 ++++++++++++++++++++++
- 1 file changed, 61 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
-@@ -0,0 +1,61 @@
-+* Broadcom BCM6328 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6328-pinctrl".
-+- reg: Register specifies of dirout, dat, mode, mux registers.
-+- reg-names: Must be "dirout", "dat", "mode", "mux".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6328-pinctrl";
-+      reg = <0x10000080 0x8>,
-+            <0x10000088 0x8>,
-+            <0x10000098 0x4>,
-+            <0x1000009c 0xc>;
-+      reg-names = "dirout", "dat", "mode", "mux";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+gpio0         0       led
-+gpio1         1       led
-+gpio2         2       led
-+gpio3         3       led
-+gpio4         4       led
-+gpio5         5       led
-+gpio6         6       led, serial_led_data
-+gpio7         7       led, serial_led_clk
-+gpio8         8       led
-+gpio9         9       led
-+gpio10                10      led
-+gpio11                11      led
-+gpio12                12      led
-+gpio13                13      led
-+gpio14                14      led
-+gpio15                15      led
-+gpio16                16      led, pcie_clkreq
-+gpio17                17      led
-+gpio18                18      led
-+gpio19                19      led
-+gpio20                20      led
-+gpio21                21      led
-+gpio22                22      led
-+gpio23                23      led
-+gpio24                24      -
-+gpio25                25      ephy0_act_led
-+gpio26                26      ephy1_act_led
-+gpio27                27      ephy2_act_led
-+gpio28                28      ephy3_act_led
-+gpio29                29      -
-+gpio30                30      -
-+gpio31                31      -
-+hsspi_cs1     -       hsspi_cs1
-+usb_port1     -       usb_host_port, usb_device_port
diff --git a/target/linux/bcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch b/target/linux/bcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch
deleted file mode 100644 (file)
index 3c5f15b..0000000
+++ /dev/null
@@ -1,495 +0,0 @@
-From 393e9753f6492c1fdf55891ddee60d955ae8b119 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:12:50 +0200
-Subject: [PATCH 03/16] pinctrl: add a pincontrol driver for BCM6328
-
-Add a pincontrol driver for BCM6328. BCM628 supports muxing 32 pins as
-GPIOs, as LEDs for the integrated LED controller, or various other
-functions. Its pincontrol mux registers also control other aspects, like
-switching the second USB port between host and device mode.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c | 456 ++++++++++++++++++++++++++++++
- 3 files changed, 464 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -1,3 +1,10 @@
- config PINCTRL_BCM63XX
-       bool
-       select GPIO_GENERIC
-+
-+config PINCTRL_BCM6328
-+      bool "BCM6328 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
-+obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
-@@ -0,0 +1,456 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/machine.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6328_MUX_LO_REG    0x4
-+#define BCM6328_MUX_HI_REG    0x0
-+#define BCM6328_MUX_OTHER_REG 0x8
-+
-+#define BCM6328_NGPIO         32
-+
-+struct bcm6328_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6328_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      unsigned mode_val:1;
-+      unsigned mux_val:2;
-+};
-+
-+struct bcm6328_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+      void __iomem *mux[3];
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio;
-+};
-+
-+static const struct pinctrl_pin_desc bcm6328_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      PINCTRL_PIN(8, "gpio8"),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      PINCTRL_PIN(12, "gpio12"),
-+      PINCTRL_PIN(13, "gpio13"),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      PINCTRL_PIN(27, "gpio27"),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      PINCTRL_PIN(30, "gpio30"),
-+      PINCTRL_PIN(31, "gpio31"),
-+
-+      /*
-+       * No idea where they really are; so let's put them according
-+       * to their mux offsets.
-+       */
-+      PINCTRL_PIN(36, "hsspi_cs1"),
-+      PINCTRL_PIN(38, "usb_p2"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+
-+static unsigned hsspi_cs1_pins[] = { 36 };
-+static unsigned usb_port1_pins[] = { 38 };
-+
-+#define BCM6328_GROUP(n)                                      \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+      }
-+
-+static struct bcm6328_pingroup bcm6328_groups[] = {
-+      BCM6328_GROUP(gpio0),
-+      BCM6328_GROUP(gpio1),
-+      BCM6328_GROUP(gpio2),
-+      BCM6328_GROUP(gpio3),
-+      BCM6328_GROUP(gpio4),
-+      BCM6328_GROUP(gpio5),
-+      BCM6328_GROUP(gpio6),
-+      BCM6328_GROUP(gpio7),
-+      BCM6328_GROUP(gpio8),
-+      BCM6328_GROUP(gpio9),
-+      BCM6328_GROUP(gpio10),
-+      BCM6328_GROUP(gpio11),
-+      BCM6328_GROUP(gpio12),
-+      BCM6328_GROUP(gpio13),
-+      BCM6328_GROUP(gpio14),
-+      BCM6328_GROUP(gpio15),
-+      BCM6328_GROUP(gpio16),
-+      BCM6328_GROUP(gpio17),
-+      BCM6328_GROUP(gpio18),
-+      BCM6328_GROUP(gpio19),
-+      BCM6328_GROUP(gpio20),
-+      BCM6328_GROUP(gpio21),
-+      BCM6328_GROUP(gpio22),
-+      BCM6328_GROUP(gpio23),
-+      BCM6328_GROUP(gpio24),
-+      BCM6328_GROUP(gpio25),
-+      BCM6328_GROUP(gpio26),
-+      BCM6328_GROUP(gpio27),
-+      BCM6328_GROUP(gpio28),
-+      BCM6328_GROUP(gpio29),
-+      BCM6328_GROUP(gpio30),
-+      BCM6328_GROUP(gpio31),
-+
-+      BCM6328_GROUP(hsspi_cs1),
-+      BCM6328_GROUP(usb_port1),
-+};
-+
-+/* GPIO_MODE */
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+/* PINMUX_SEL */
-+static const char * const serial_led_data_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const inet_act_led_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const pcie_clkreq_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const ephy0_act_led_groups[] = {
-+      "gpio25",
-+};
-+
-+static const char * const ephy1_act_led_groups[] = {
-+      "gpio26",
-+};
-+
-+static const char * const ephy2_act_led_groups[] = {
-+      "gpio27",
-+};
-+
-+static const char * const ephy3_act_led_groups[] = {
-+      "gpio28",
-+};
-+
-+static const char * const hsspi_cs1_groups[] = {
-+      "hsspi_cs1"
-+};
-+
-+static const char * const usb_host_port_groups[] = {
-+      "usb_port1",
-+};
-+
-+static const char * const usb_device_port_groups[] = {
-+      "usb_port1",
-+};
-+
-+#define BCM6328_MODE_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mode_val = 1,                          \
-+      }
-+
-+#define BCM6328_MUX_FUN(n, mux)                               \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mux_val = mux,                         \
-+      }
-+
-+static const struct bcm6328_function bcm6328_funcs[] = {
-+      BCM6328_MODE_FUN(led),
-+      BCM6328_MUX_FUN(serial_led_data, 2),
-+      BCM6328_MUX_FUN(serial_led_clk, 2),
-+      BCM6328_MUX_FUN(inet_act_led, 1),
-+      BCM6328_MUX_FUN(pcie_clkreq, 2),
-+      BCM6328_MUX_FUN(ephy0_act_led, 1),
-+      BCM6328_MUX_FUN(ephy1_act_led, 1),
-+      BCM6328_MUX_FUN(ephy2_act_led, 1),
-+      BCM6328_MUX_FUN(ephy3_act_led, 1),
-+      BCM6328_MUX_FUN(hsspi_cs1, 2),
-+      BCM6328_MUX_FUN(usb_host_port, 1),
-+      BCM6328_MUX_FUN(usb_device_port, 2),
-+};
-+
-+static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6328_groups);
-+}
-+
-+static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6328_groups[group].name;
-+}
-+
-+static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6328_groups[group].pins;
-+      *num_pins = bcm6328_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6328_funcs);
-+}
-+
-+static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6328_funcs[selector].name;
-+}
-+
-+static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6328_funcs[selector].groups;
-+      *num_groups = bcm6328_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pctl, unsigned pin,
-+                          u32 mode, u32 mux)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      if (pin < 32) {
-+              reg = __raw_readl(pctl->mode);
-+              reg &= ~BIT(pin);
-+              if (mode)
-+                      reg |= BIT(pin);
-+              __raw_writel(reg, pctl->mode);
-+      }
-+
-+      reg = __raw_readl(pctl->mux[pin / 16]);
-+      reg &= ~(3UL << ((pin % 16) * 2));
-+      reg |= mux << ((pin % 16) * 2);
-+      __raw_writel(reg, pctl->mux[pin / 16]);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6328_pingroup *grp = &bcm6328_groups[group];
-+      const struct bcm6328_function *f = &bcm6328_funcs[selector];
-+
-+      bcm6328_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
-+
-+      return 0;
-+}
-+
-+static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      bcm6328_rmw_mux(pctl, offset, 0, 0);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6328_pctl_ops = {
-+      .get_groups_count       = bcm6328_pinctrl_get_group_count,
-+      .get_group_name         = bcm6328_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6328_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6328_pmx_ops = {
-+      .get_functions_count    = bcm6328_pinctrl_get_func_count,
-+      .get_function_name      = bcm6328_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6328_pinctrl_get_groups,
-+      .set_mux                = bcm6328_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6328_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6328_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6328_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode, *mux;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
-+      mux = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mux))
-+              return PTR_ERR(mux);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+      pctl->mux[0] = mux + BCM6328_MUX_LO_REG;
-+      pctl->mux[1] = mux + BCM6328_MUX_HI_REG;
-+      pctl->mux[2] = mux + BCM6328_MUX_OTHER_REG;
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6328_pctl_ops;
-+      pctl->desc.pmxops = &bcm6328_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6328_pins);
-+      pctl->desc.pins = bcm6328_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               &pctl->gpio, BCM6328_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6328_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6328-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6328_pinctrl_driver = {
-+      .probe = bcm6328_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6328-pinctrl",
-+              .of_match_table = bcm6328_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6328_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 6bac903..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
-From 962c46bf7f43df730e2d3698930e77958cc6b191 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:35:45 +0200
-Subject: [PATCH 04/16] Documentation: add BCM6348 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6348 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6348-pinctrl.txt      | 32 ++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
-@@ -0,0 +1,32 @@
-+* Broadcom BCM6348 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6348-pinctrl".
-+- reg: register Specifiers of dirout, dat, mode registers.
-+- reg-names: Must be "dirout", "dat", "mode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@fffe0080 {
-+      compatible = "brcm,bcm6348-pinctrl";
-+      reg = <0xfffe0080 0x8>,
-+            <0xfffe0088 0x8>,
-+            <0xfffe0098 0x4>;
-+      reg-names = "dirout", "dat", "mode";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+group0                32-36   ext_mii, utopia, diag
-+group1                22-31   ext_ephy, mii_snoop, mii_pccard,
-+                      spi_master_uart, utopia, diag
-+group2                16-21   pci, diag
-+group3                8-15    ext_mii, utopia
-+group4                0-7     ext_ephy, mii_snoop, legacy_led, diag
diff --git a/target/linux/bcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch b/target/linux/bcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch
deleted file mode 100644 (file)
index b48723c..0000000
+++ /dev/null
@@ -1,431 +0,0 @@
-From 45444cb631555e2dc16b95d779b10aa075c7482e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:14:13 +0200
-Subject: [PATCH 05/16] pinctrl: add a pincontrol driver for BCM6348
-
-Add a pincotrol driver for BCM6348. BCM6348 allow muxing five groups of
-up to ten gpios into fourteen potential functions. It does not allow
-muxing individual pins. Some functions require more than one group to be
-muxed to the same function.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c | 391 ++++++++++++++++++++++++++++++
- 3 files changed, 399 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -8,3 +8,10 @@ config PINCTRL_BCM6328
-       select PINCONF
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6348
-+      bool "BCM6348 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
-+obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
-@@ -0,0 +1,391 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/machine.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6348_NGPIO         37
-+
-+#define MAX_GROUP             4
-+#define PINS_PER_GROUP                8
-+#define PIN_TO_GROUP(pin)     (MAX_GROUP - ((pin) / PINS_PER_GROUP))
-+#define GROUP_SHIFT(pin)      (PIN_TO_GROUP(pin) * 4)
-+#define GROUP_MASK(pin)               (0xf << GROUP_SHIFT(pin))
-+
-+struct bcm6348_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6348_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+      unsigned int value;
-+};
-+
-+struct bcm6348_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6348_PIN(a, b, group)              \
-+      {                                       \
-+              .number = a,                    \
-+              .name = b,                      \
-+              .drv_data = (void *)(group),    \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6348_pins[] = {
-+      BCM6348_PIN(0, "gpio0", 4),
-+      BCM6348_PIN(1, "gpio1", 4),
-+      BCM6348_PIN(2, "gpio2", 4),
-+      BCM6348_PIN(3, "gpio3", 4),
-+      BCM6348_PIN(4, "gpio4", 4),
-+      BCM6348_PIN(5, "gpio5", 4),
-+      BCM6348_PIN(6, "gpio6", 4),
-+      BCM6348_PIN(7, "gpio7", 4),
-+      BCM6348_PIN(8, "gpio8", 3),
-+      BCM6348_PIN(9, "gpio9", 3),
-+      BCM6348_PIN(10, "gpio10", 3),
-+      BCM6348_PIN(11, "gpio11", 3),
-+      BCM6348_PIN(12, "gpio12", 3),
-+      BCM6348_PIN(13, "gpio13", 3),
-+      BCM6348_PIN(14, "gpio14", 3),
-+      BCM6348_PIN(15, "gpio15", 3),
-+      BCM6348_PIN(16, "gpio16", 2),
-+      BCM6348_PIN(17, "gpio17", 2),
-+      BCM6348_PIN(18, "gpio18", 2),
-+      BCM6348_PIN(19, "gpio19", 2),
-+      BCM6348_PIN(20, "gpio20", 2),
-+      BCM6348_PIN(21, "gpio21", 2),
-+      BCM6348_PIN(22, "gpio22", 1),
-+      BCM6348_PIN(23, "gpio23", 1),
-+      BCM6348_PIN(24, "gpio24", 1),
-+      BCM6348_PIN(25, "gpio25", 1),
-+      BCM6348_PIN(26, "gpio26", 1),
-+      BCM6348_PIN(27, "gpio27", 1),
-+      BCM6348_PIN(28, "gpio28", 1),
-+      BCM6348_PIN(29, "gpio29", 1),
-+      BCM6348_PIN(30, "gpio30", 1),
-+      BCM6348_PIN(31, "gpio31", 1),
-+      BCM6348_PIN(32, "gpio32", 0),
-+      BCM6348_PIN(33, "gpio33", 0),
-+      BCM6348_PIN(34, "gpio34", 0),
-+      BCM6348_PIN(35, "gpio35", 0),
-+      BCM6348_PIN(36, "gpio36", 0),
-+};
-+
-+enum bcm6348_muxes {
-+      BCM6348_MUX_GPIO = 0,
-+      BCM6348_MUX_EXT_EPHY,
-+      BCM6348_MUX_MII_SNOOP,
-+      BCM6348_MUX_LEGACY_LED,
-+      BCM6348_MUX_MII_PCCARD,
-+      BCM6348_MUX_PCI,
-+      BCM6348_MUX_SPI_MASTER_UART,
-+      BCM6348_MUX_EXT_MII,
-+      BCM6348_MUX_UTOPIA,
-+      BCM6348_MUX_DIAG,
-+};
-+
-+static unsigned group0_pins[] = {
-+      32, 33, 34, 35, 36,
-+};
-+
-+static unsigned group1_pins[] = {
-+      22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned group2_pins[] = {
-+      16, 17, 18, 19, 20, 21,
-+};
-+
-+static unsigned group3_pins[] = {
-+      8, 9, 10, 11, 12, 13, 14, 15,
-+};
-+
-+static unsigned group4_pins[] = {
-+      0, 1, 2, 3, 4, 5, 6, 7,
-+};
-+
-+#define BCM6348_GROUP(n)                              \
-+      {                                               \
-+              .name = #n,                             \
-+              .pins = n##_pins,                       \
-+              .num_pins = ARRAY_SIZE(n##_pins),       \
-+      } \
-+
-+static struct bcm6348_pingroup bcm6348_groups[] = {
-+      BCM6348_GROUP(group0),
-+      BCM6348_GROUP(group1),
-+      BCM6348_GROUP(group2),
-+      BCM6348_GROUP(group3),
-+      BCM6348_GROUP(group4),
-+};
-+
-+static const char * const ext_mii_groups[] = {
-+      "group0",
-+      "group3",
-+};
-+
-+static const char * const ext_ephy_groups[] = {
-+      "group1",
-+      "group4"
-+};
-+
-+static const char * const mii_snoop_groups[] = {
-+      "group1",
-+      "group4",
-+};
-+
-+static const char * const legacy_led_groups[] = {
-+      "group4",
-+};
-+
-+static const char * const mii_pccard_groups[] = {
-+      "group1",
-+};
-+
-+static const char * const pci_groups[] = {
-+      "group2",
-+};
-+
-+static const char * const spi_master_uart_groups[] = {
-+      "group1",
-+};
-+
-+static const char * const utopia_groups[] = {
-+      "group0",
-+      "group1",
-+      "group3",
-+};
-+
-+static const char * const diag_groups[] = {
-+      "group0",
-+      "group1",
-+      "group2",
-+      "group4",
-+};
-+
-+#define BCM6348_FUN(n, f)                             \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .value = BCM6348_MUX_##f,               \
-+      }
-+
-+static const struct bcm6348_function bcm6348_funcs[] = {
-+      BCM6348_FUN(ext_mii, EXT_MII),
-+      BCM6348_FUN(ext_ephy, EXT_EPHY),
-+      BCM6348_FUN(mii_snoop, MII_SNOOP),
-+      BCM6348_FUN(legacy_led, LEGACY_LED),
-+      BCM6348_FUN(mii_pccard, MII_PCCARD),
-+      BCM6348_FUN(pci, PCI),
-+      BCM6348_FUN(spi_master_uart, SPI_MASTER_UART),
-+      BCM6348_FUN(utopia, UTOPIA),
-+      BCM6348_FUN(diag, DIAG),
-+};
-+
-+static int bcm6348_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6348_groups);
-+}
-+
-+static const char *bcm6348_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6348_groups[group].name;
-+}
-+
-+static int bcm6348_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6348_groups[group].pins;
-+      *num_pins = bcm6348_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6348_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6348_funcs);
-+}
-+
-+static const char *bcm6348_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6348_funcs[selector].name;
-+}
-+
-+static int bcm6348_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6348_funcs[selector].groups;
-+      *num_groups = bcm6348_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6348_rmw_mux(struct bcm6348_pinctrl *pctl, u32 mask, u32 val)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+
-+      reg = __raw_readl(pctl->mode);
-+      reg &= ~mask;
-+      reg |= val & mask;
-+      __raw_writel(reg, pctl->mode);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6348_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6348_pingroup *grp = &bcm6348_groups[group];
-+      const struct bcm6348_function *f = &bcm6348_funcs[selector];
-+      u32 mask, val;
-+
-+      /*
-+       * pins n..(n+7) share the same group, so we only need to look at
-+       * the first pin.
-+       */
-+      mask = GROUP_MASK(grp->pins[0]);
-+      val = f->value << GROUP_SHIFT(grp->pins[0]);
-+
-+      bcm6348_rmw_mux(pctl, mask, val);
-+
-+      return 0;
-+}
-+
-+static int bcm6348_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      struct pin_desc *desc;
-+      u32 mask;
-+
-+      /* don't reconfigure if already muxed */
-+      desc = pin_desc_get(pctldev, offset);
-+      if (desc->mux_usecount)
-+              return 0;
-+
-+      mask = GROUP_MASK(offset);
-+
-+      /* disable all functions using this pin */
-+      bcm6348_rmw_mux(pctl, mask, 0);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6348_pctl_ops = {
-+      .get_groups_count       = bcm6348_pinctrl_get_group_count,
-+      .get_group_name         = bcm6348_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6348_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6348_pmx_ops = {
-+      .get_functions_count    = bcm6348_pinctrl_get_func_count,
-+      .get_function_name      = bcm6348_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6348_pinctrl_get_groups,
-+      .set_mux                = bcm6348_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6348_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6348_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6348_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+
-+      /* disable all muxes by default */
-+      __raw_writel(0, pctl->mode);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6348_pctl_ops;
-+      pctl->desc.pmxops = &bcm6348_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6348_pins);
-+      pctl->desc.pins = bcm6348_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6348_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6348_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6348-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6348_pinctrl_driver = {
-+      .probe = bcm6348_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6348-pinctrl",
-+              .of_match_table = bcm6348_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6348_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index e8a7479..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From c7c8fa7f5b5ee9bea751fa7bdae8ff4acde8f26e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:00 +0200
-Subject: [PATCH 06/16] Documentation: add BCM6358 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6358 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6358-pinctrl.txt      | 44 ++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
-@@ -0,0 +1,44 @@
-+* Broadcom BCM6358 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6358-pinctrl".
-+- reg: Register specifiers of dirout, dat registers.
-+- reg-names: Must be "dirout", "dat".
-+- brcm,gpiomode: Phandle to the shared gpiomode register.
-+- gpio-controller: Identifies this node as a gpio-controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@fffe0080 {
-+      compatible = "brcm,bcm6358-pinctrl";
-+      reg = <0xfffe0080 0x8>,
-+            <0xfffe0088 0x8>,
-+            <0xfffe0098 0x4>;
-+      reg-names = "dirout", "dat";
-+      brcm,gpiomode = <&gpiomode>;
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+gpiomode: syscon@fffe0098 {
-+      compatible = "brcm,bcm6358-gpiomode", "syscon";
-+      reg = <0xfffe0098 0x4>;
-+      native-endian;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins            functions
-+-----------------------------------------------------------
-+ebi_cs_grp    30-31           ebi_cs
-+uart1_grp     28-31           uart1
-+spi_cs_grp    32-33           spi_cs
-+async_modem_grp       12-15           async_modem
-+legacy_led_grp        9-15            legacy_led
-+serial_led_grp        6-7             serial_led
-+led_grp               0-3             led
-+utopia_grp    12-15, 22-31    utopia
-+pwm_syn_clk_grp       8               pwm_syn_clk
-+sys_irq_grp   5               sys_irq
diff --git a/target/linux/bcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch b/target/linux/bcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch
deleted file mode 100644 (file)
index 87dc741..0000000
+++ /dev/null
@@ -1,436 +0,0 @@
-From fb00ef462f3f8b70ea8902151cc72810fe90b999 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:16:01 +0200
-Subject: [PATCH 07/16] pinctrl: add a pincontrol driver for BCM6358
-
-Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
-functions onto the GPIO pins. It does not support configuring individual
-pins but only whole groups. These groups may overlap, and still require
-the directions to be set correctly in the GPIO register. In addition the
-functions register controls other, not directly mux related functions.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   8 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c | 393 ++++++++++++++++++++++++++++++
- 3 files changed, 402 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -15,3 +15,11 @@ config PINCTRL_BCM6348
-       select PINCONF
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6358
-+      bool "BCM6358 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
-+      select MFD_SYSCON
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
-+obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
-@@ -0,0 +1,393 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/regmap.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+/* GPIO_MODE register */
-+#define BCM6358_MODE_MUX_NONE         0
-+
-+/* overlays on gpio pins */
-+#define BCM6358_MODE_MUX_EBI_CS               BIT(5)
-+#define BCM6358_MODE_MUX_UART1                BIT(6)
-+#define BCM6358_MODE_MUX_SPI_CS               BIT(7)
-+#define BCM6358_MODE_MUX_ASYNC_MODEM  BIT(8)
-+#define BCM6358_MODE_MUX_LEGACY_LED   BIT(9)
-+#define BCM6358_MODE_MUX_SERIAL_LED   BIT(10)
-+#define BCM6358_MODE_MUX_LED          BIT(11)
-+#define BCM6358_MODE_MUX_UTOPIA               BIT(12)
-+#define BCM6358_MODE_MUX_CLKRST               BIT(13)
-+#define BCM6358_MODE_MUX_PWM_SYN_CLK  BIT(14)
-+#define BCM6358_MODE_MUX_SYS_IRQ      BIT(15)
-+
-+#define BCM6358_NGPIO                 40
-+
-+struct bcm6358_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+
-+      const u16 mode_val;
-+
-+      /* non-GPIO function muxes require the gpio direction to be set */
-+      const u16 direction;
-+};
-+
-+struct bcm6358_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+};
-+
-+struct bcm6358_pinctrl {
-+      struct device *dev;
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      struct regmap_field *overlays;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3)              \
-+      {                                                       \
-+              .number = a,                                    \
-+              .name = b,                                      \
-+              .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 |  \
-+                                   BCM6358_MODE_MUX_##bit2 |  \
-+                                   BCM6358_MODE_MUX_##bit3),  \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6358_pins[] = {
-+      BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE),
-+      PINCTRL_PIN(4, "gpio4"),
-+      BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE),
-+      BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE),
-+      BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE),
-+      BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE),
-+      BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS),
-+      BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS),
-+      BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE),
-+      BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+};
-+
-+static unsigned ebi_cs_grp_pins[] = { 30, 31 };
-+
-+static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 };
-+
-+static unsigned spi_cs_grp_pins[] = { 32, 33 };
-+
-+static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 };
-+
-+static unsigned serial_led_grp_pins[] = { 6, 7 };
-+
-+static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 };
-+
-+static unsigned led_grp_pins[] = { 0, 1, 2, 3 };
-+
-+static unsigned utopia_grp_pins[] = {
-+      12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned pwm_syn_clk_grp_pins[] = { 8 };
-+
-+static unsigned sys_irq_grp_pins[] = { 5 };
-+
-+#define BCM6358_GPIO_MUX_GROUP(n, bit, dir)                   \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+              .mode_val = BCM6358_MODE_MUX_##bit,             \
-+              .direction = dir,                               \
-+      }
-+
-+static const struct bcm6358_pingroup bcm6358_groups[] = {
-+      BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3),
-+      BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2),
-+      BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6),
-+      BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6),
-+      BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f),
-+      BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3),
-+      BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf),
-+      BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f),
-+      BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1),
-+      BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1),
-+};
-+
-+static const char * const ebi_cs_groups[] = {
-+      "ebi_cs_grp"
-+};
-+
-+static const char * const uart1_groups[] = {
-+      "uart1_grp"
-+};
-+
-+static const char * const spi_cs_2_3_groups[] = {
-+      "spi_cs_2_3_grp"
-+};
-+
-+static const char * const async_modem_groups[] = {
-+      "async_modem_grp"
-+};
-+
-+static const char * const legacy_led_groups[] = {
-+      "legacy_led_grp",
-+};
-+
-+static const char * const serial_led_groups[] = {
-+      "serial_led_grp",
-+};
-+
-+static const char * const led_groups[] = {
-+      "led_grp",
-+};
-+
-+static const char * const clkrst_groups[] = {
-+      "clkrst_grp",
-+};
-+
-+static const char * const pwm_syn_clk_groups[] = {
-+      "pwm_syn_clk_grp",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+      "sys_irq_grp",
-+};
-+
-+#define BCM6358_FUN(n)                                        \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+      }
-+
-+static const struct bcm6358_function bcm6358_funcs[] = {
-+      BCM6358_FUN(ebi_cs),
-+      BCM6358_FUN(uart1),
-+      BCM6358_FUN(spi_cs_2_3),
-+      BCM6358_FUN(async_modem),
-+      BCM6358_FUN(legacy_led),
-+      BCM6358_FUN(serial_led),
-+      BCM6358_FUN(led),
-+      BCM6358_FUN(clkrst),
-+      BCM6358_FUN(pwm_syn_clk),
-+      BCM6358_FUN(sys_irq),
-+};
-+
-+static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6358_groups);
-+}
-+
-+static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6358_groups[group].name;
-+}
-+
-+static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6358_groups[group].pins;
-+      *num_pins = bcm6358_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6358_funcs);
-+}
-+
-+static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6358_funcs[selector].name;
-+}
-+
-+static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6358_funcs[selector].groups;
-+      *num_groups = bcm6358_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6358_pingroup *grp = &bcm6358_groups[group];
-+      u32 val = grp->mode_val;
-+      u32 mask = val;
-+      unsigned pin;
-+
-+      for (pin = 0; pin < grp->num_pins; pin++)
-+              mask |= (unsigned long)bcm6358_pins[pin].drv_data;
-+
-+      regmap_field_update_bits(pctl->overlays, mask, val);
-+
-+      for (pin = 0; pin < grp->num_pins; pin++) {
-+              int hw_gpio = bcm6358_pins[pin].number;
-+              struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
-+
-+              if (grp->direction & BIT(pin))
-+                      gc->direction_output(gc, hw_gpio % 32, 0);
-+              else
-+                      gc->direction_input(gc, hw_gpio % 32);
-+      }
-+
-+      return 0;
-+}
-+
-+static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      u32 mask;
-+
-+      mask = (unsigned long)bcm6358_pins[offset].drv_data;
-+      if (!mask)
-+              return 0;
-+
-+      /* disable all functions using this pin */
-+      return regmap_field_update_bits(pctl->overlays, mask, 0);
-+}
-+
-+static struct pinctrl_ops bcm6358_pctl_ops = {
-+      .get_groups_count       = bcm6358_pinctrl_get_group_count,
-+      .get_group_name         = bcm6358_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6358_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6358_pmx_ops = {
-+      .get_functions_count    = bcm6358_pinctrl_get_func_count,
-+      .get_function_name      = bcm6358_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6358_pinctrl_get_groups,
-+      .set_mux                = bcm6358_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6358_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6358_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6358_pinctrl *pctl;
-+      struct regmap *mode;
-+      struct reg_field overlays = REG_FIELD(0, 0, 15);
-+
-+      if (pdev->dev.of_node)
-+              mode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+                                                     "brcm,gpiomode");
-+      else
-+              mode = syscon_regmap_lookup_by_pdevname("syscon.fffe0098");
-+
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      pctl->overlays = devm_regmap_field_alloc(&pdev->dev, mode, overlays);
-+      if (IS_ERR(pctl->overlays))
-+              return PTR_ERR(pctl->overlays);
-+
-+      /* disable all muxes by default */
-+      regmap_field_write(pctl->overlays, 0);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6358_pctl_ops;
-+      pctl->desc.pmxops = &bcm6358_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6358_pins);
-+      pctl->desc.pins = bcm6358_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6358_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6358_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6358-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6358_pinctrl_driver = {
-+      .probe = bcm6358_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6358-pinctrl",
-+              .of_match_table = bcm6358_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6358_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 9fc424c..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From ba03ea8ada2ca71c9095d96a1e4085c2c5cf0e69 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:18 +0200
-Subject: [PATCH 08/16] Documentation: add BCM6362 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6362 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6362-pinctrl.txt      | 79 ++++++++++++++++++++++
- 1 file changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
-@@ -0,0 +1,79 @@
-+* Broadcom BCM6362 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6362-pinctrl"
-+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
-+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6362-pinctrl";
-+      reg = <0x10000080 0x8>,
-+            <0x10000088 0x8>,
-+            <0x10000090 0x4>,
-+            <0x10000098 0x4>,
-+            <0x1000009c 0x4>,
-+            <0x100000b8 0x4>;
-+      reg-names = "dirout", "dat", "led",
-+                  "mode", "ctrl", "basemode";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins            functions
-+-----------------------------------------------------------
-+gpio0         0               led, usb_device_led
-+gpio1         1               led, sys_irq
-+gpio2         2               led, serial_led_clk
-+gpio3         3               led, serial_led_data
-+gpio4         4               led, robosw_led_data
-+gpio5         5               led, robosw_led_clk
-+gpio6         6               led, robosw_led0
-+gpio7         7               led, robosw_led1
-+gpio8         8               led, inet_led
-+gpio9         9               led, spi_cs2
-+gpio10                10              led, spi_cs3
-+gpio11                11              led, ntr_pulse
-+gpio12                12              led, uart1_scts
-+gpio13                13              led, uart1_srts
-+gpio14                14              led, uart1_sdin
-+gpio15                15              led, uart1_sdout
-+gpio16                16              led, adsl_spi_miso
-+gpio17                17              led, adsl_spi_mosi
-+gpio18                18              led, adsl_spi_clk
-+gpio19                19              led, adsl_spi_cs
-+gpio20                20              led, ephy0_led
-+gpio21                21              led, ephy1_led
-+gpio22                22              led, ephy2_led
-+gpio23                23              led, ephy3_led
-+gpio24                24              ext_irq0
-+gpio25                25              ext_irq1
-+gpio26                26              ext_irq2
-+gpio27                27              ext_irq3
-+gpio28                28              -
-+gpio29                29              -
-+gpio30                30              -
-+gpio31                31              -
-+gpio32                32              wifi
-+gpio33                33              wifi
-+gpio34                34              wifi
-+gpio35                35              wifi
-+gpio36                36              wifi
-+gpio37                37              wifi
-+gpio38                38              wifi
-+gpio39                39              wifi
-+gpio40                40              wifi
-+gpio41                41              wifi
-+gpio42                42              wifi
-+gpio43                43              wifi
-+gpio44                44              wifi
-+gpio45                45              wifi
-+gpio46                46              wifi
-+gpio47                47              wifi
-+nand_grp      8, 12-23, 27    nand
diff --git a/target/linux/bcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch b/target/linux/bcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch
deleted file mode 100644 (file)
index 726a97f..0000000
+++ /dev/null
@@ -1,733 +0,0 @@
-From eea6b96701d734095e2f823f3a82d9b063f553ae Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:17:20 +0200
-Subject: [PATCH 09/16] pinctrl: add a pincontrol driver for BCM6362
-
-Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
-GPIO pins to the LED controller, to be available by the integrated
-wifi, or other functions. It also supports overlay groups, of which
-only NAND is documented.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c | 692 ++++++++++++++++++++++++++++++
- 3 files changed, 700 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -23,3 +23,10 @@ config PINCTRL_BCM6358
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-       select MFD_SYSCON
-+
-+config PINCTRL_BCM6362
-+      bool "BCM6362 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -2,3 +2,4 @@ obj-$(CONFIG_PINCTRL_BCM63XX)  += pinctrl
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
-+obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
-@@ -0,0 +1,692 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6362_NGPIO 48
-+
-+/* GPIO_BASEMODE register */
-+#define BASEMODE_NAND BIT(2)
-+
-+enum bcm6362_pinctrl_reg {
-+      BCM6362_LEDCTRL,
-+      BCM6362_MODE,
-+      BCM6362_CTRL,
-+      BCM6362_BASEMODE,
-+};
-+
-+struct bcm6362_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6362_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      enum bcm6362_pinctrl_reg reg;
-+      u32 basemode_mask;
-+};
-+
-+struct bcm6362_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *led;
-+      void __iomem *mode;
-+      void __iomem *ctrl;
-+      void __iomem *basemode;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6362_PIN(a, b, mask)                       \
-+      {                                       \
-+              .number = a,                    \
-+              .name = b,                      \
-+              .drv_data = (void *)(mask),     \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6362_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      BCM6362_PIN(8, "gpio8", BASEMODE_NAND),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      BCM6362_PIN(12, "gpio12", BASEMODE_NAND),
-+      BCM6362_PIN(13, "gpio13", BASEMODE_NAND),
-+      BCM6362_PIN(14, "gpio14", BASEMODE_NAND),
-+      BCM6362_PIN(15, "gpio15", BASEMODE_NAND),
-+      BCM6362_PIN(16, "gpio16", BASEMODE_NAND),
-+      BCM6362_PIN(17, "gpio17", BASEMODE_NAND),
-+      BCM6362_PIN(18, "gpio18", BASEMODE_NAND),
-+      BCM6362_PIN(19, "gpio19", BASEMODE_NAND),
-+      BCM6362_PIN(20, "gpio20", BASEMODE_NAND),
-+      BCM6362_PIN(21, "gpio21", BASEMODE_NAND),
-+      BCM6362_PIN(22, "gpio22", BASEMODE_NAND),
-+      BCM6362_PIN(23, "gpio23", BASEMODE_NAND),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      BCM6362_PIN(27, "gpio27", BASEMODE_NAND),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      PINCTRL_PIN(30, "gpio30"),
-+      PINCTRL_PIN(31, "gpio31"),
-+      PINCTRL_PIN(32, "gpio32"),
-+      PINCTRL_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+      PINCTRL_PIN(40, "gpio40"),
-+      PINCTRL_PIN(41, "gpio41"),
-+      PINCTRL_PIN(42, "gpio42"),
-+      PINCTRL_PIN(43, "gpio43"),
-+      PINCTRL_PIN(44, "gpio44"),
-+      PINCTRL_PIN(45, "gpio45"),
-+      PINCTRL_PIN(46, "gpio46"),
-+      PINCTRL_PIN(47, "gpio47"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+
-+static unsigned nand_grp_pins[] = {
-+      8, 12, 13, 14, 15, 16, 17,
-+      18, 19, 20, 21, 22, 23, 27,
-+};
-+
-+#define BCM6362_GROUP(n)                              \
-+      {                                               \
-+              .name = #n,                             \
-+              .pins = n##_pins,                       \
-+              .num_pins = ARRAY_SIZE(n##_pins),       \
-+      }
-+
-+static struct bcm6362_pingroup bcm6362_groups[] = {
-+      BCM6362_GROUP(gpio0),
-+      BCM6362_GROUP(gpio1),
-+      BCM6362_GROUP(gpio2),
-+      BCM6362_GROUP(gpio3),
-+      BCM6362_GROUP(gpio4),
-+      BCM6362_GROUP(gpio5),
-+      BCM6362_GROUP(gpio6),
-+      BCM6362_GROUP(gpio7),
-+      BCM6362_GROUP(gpio8),
-+      BCM6362_GROUP(gpio9),
-+      BCM6362_GROUP(gpio10),
-+      BCM6362_GROUP(gpio11),
-+      BCM6362_GROUP(gpio12),
-+      BCM6362_GROUP(gpio13),
-+      BCM6362_GROUP(gpio14),
-+      BCM6362_GROUP(gpio15),
-+      BCM6362_GROUP(gpio16),
-+      BCM6362_GROUP(gpio17),
-+      BCM6362_GROUP(gpio18),
-+      BCM6362_GROUP(gpio19),
-+      BCM6362_GROUP(gpio20),
-+      BCM6362_GROUP(gpio21),
-+      BCM6362_GROUP(gpio22),
-+      BCM6362_GROUP(gpio23),
-+      BCM6362_GROUP(gpio24),
-+      BCM6362_GROUP(gpio25),
-+      BCM6362_GROUP(gpio26),
-+      BCM6362_GROUP(gpio27),
-+      BCM6362_GROUP(gpio28),
-+      BCM6362_GROUP(gpio29),
-+      BCM6362_GROUP(gpio30),
-+      BCM6362_GROUP(gpio31),
-+      BCM6362_GROUP(gpio32),
-+      BCM6362_GROUP(gpio33),
-+      BCM6362_GROUP(gpio34),
-+      BCM6362_GROUP(gpio35),
-+      BCM6362_GROUP(gpio36),
-+      BCM6362_GROUP(gpio37),
-+      BCM6362_GROUP(gpio38),
-+      BCM6362_GROUP(gpio39),
-+      BCM6362_GROUP(gpio40),
-+      BCM6362_GROUP(gpio41),
-+      BCM6362_GROUP(gpio42),
-+      BCM6362_GROUP(gpio43),
-+      BCM6362_GROUP(gpio44),
-+      BCM6362_GROUP(gpio45),
-+      BCM6362_GROUP(gpio46),
-+      BCM6362_GROUP(gpio47),
-+      BCM6362_GROUP(nand_grp),
-+};
-+
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio2",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio3",
-+};
-+
-+static const char * const robosw_led_data_groups[] = {
-+      "gpio4",
-+};
-+
-+static const char * const robosw_led_clk_groups[] = {
-+      "gpio5",
-+};
-+
-+static const char * const robosw_led0_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const robosw_led1_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const inet_led_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const spi_cs2_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const spi_cs3_groups[] = {
-+      "gpio10",
-+};
-+
-+static const char * const ntr_pulse_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const uart1_scts_groups[] = {
-+      "gpio12",
-+};
-+
-+static const char * const uart1_srts_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const uart1_sdin_groups[] = {
-+      "gpio14",
-+};
-+
-+static const char * const uart1_sdout_groups[] = {
-+      "gpio15",
-+};
-+
-+static const char * const adsl_spi_miso_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const adsl_spi_mosi_groups[] = {
-+      "gpio17",
-+};
-+
-+static const char * const adsl_spi_clk_groups[] = {
-+      "gpio18",
-+};
-+
-+static const char * const adsl_spi_cs_groups[] = {
-+      "gpio19",
-+};
-+
-+static const char * const ephy0_led_groups[] = {
-+      "gpio20",
-+};
-+
-+static const char * const ephy1_led_groups[] = {
-+      "gpio21",
-+};
-+
-+static const char * const ephy2_led_groups[] = {
-+      "gpio22",
-+};
-+
-+static const char * const ephy3_led_groups[] = {
-+      "gpio23",
-+};
-+
-+static const char * const ext_irq0_groups[] = {
-+      "gpio24",
-+};
-+
-+static const char * const ext_irq1_groups[] = {
-+      "gpio25",
-+};
-+
-+static const char * const ext_irq2_groups[] = {
-+      "gpio26",
-+};
-+
-+static const char * const ext_irq3_groups[] = {
-+      "gpio27",
-+};
-+
-+static const char * const wifi_groups[] = {
-+      "gpio32",
-+      "gpio33",
-+      "gpio34",
-+      "gpio35",
-+      "gpio36",
-+      "gpio37",
-+      "gpio38",
-+      "gpio39",
-+      "gpio40",
-+      "gpio41",
-+      "gpio42",
-+      "gpio43",
-+      "gpio44",
-+      "gpio45",
-+      "gpio46",
-+      "gpio47",
-+};
-+
-+static const char * const nand_groups[] = {
-+      "nand_grp",
-+};
-+
-+#define BCM6362_LED_FUN(n)                            \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_LEDCTRL,                 \
-+      }
-+
-+#define BCM6362_MODE_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_MODE,                    \
-+      }
-+
-+#define BCM6362_CTRL_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_CTRL,                    \
-+      }
-+
-+#define BCM6362_BASEMODE_FUN(n, mask)                 \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_BASEMODE,                \
-+              .basemode_mask = (mask),                \
-+      }
-+
-+static const struct bcm6362_function bcm6362_funcs[] = {
-+      BCM6362_LED_FUN(led),
-+      BCM6362_MODE_FUN(usb_device_led),
-+      BCM6362_MODE_FUN(sys_irq),
-+      BCM6362_MODE_FUN(serial_led_clk),
-+      BCM6362_MODE_FUN(serial_led_data),
-+      BCM6362_MODE_FUN(robosw_led_data),
-+      BCM6362_MODE_FUN(robosw_led_clk),
-+      BCM6362_MODE_FUN(robosw_led0),
-+      BCM6362_MODE_FUN(robosw_led1),
-+      BCM6362_MODE_FUN(inet_led),
-+      BCM6362_MODE_FUN(spi_cs2),
-+      BCM6362_MODE_FUN(spi_cs3),
-+      BCM6362_MODE_FUN(ntr_pulse),
-+      BCM6362_MODE_FUN(uart1_scts),
-+      BCM6362_MODE_FUN(uart1_srts),
-+      BCM6362_MODE_FUN(uart1_sdin),
-+      BCM6362_MODE_FUN(uart1_sdout),
-+      BCM6362_MODE_FUN(adsl_spi_miso),
-+      BCM6362_MODE_FUN(adsl_spi_mosi),
-+      BCM6362_MODE_FUN(adsl_spi_clk),
-+      BCM6362_MODE_FUN(adsl_spi_cs),
-+      BCM6362_MODE_FUN(ephy0_led),
-+      BCM6362_MODE_FUN(ephy1_led),
-+      BCM6362_MODE_FUN(ephy2_led),
-+      BCM6362_MODE_FUN(ephy3_led),
-+      BCM6362_MODE_FUN(ext_irq0),
-+      BCM6362_MODE_FUN(ext_irq1),
-+      BCM6362_MODE_FUN(ext_irq2),
-+      BCM6362_MODE_FUN(ext_irq3),
-+      BCM6362_CTRL_FUN(wifi),
-+      BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND),
-+};
-+
-+static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6362_groups);
-+}
-+
-+static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6362_groups[group].name;
-+}
-+
-+static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6362_groups[group].pins;
-+      *num_pins = bcm6362_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6362_funcs);
-+}
-+
-+static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6362_funcs[selector].name;
-+}
-+
-+static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6362_funcs[selector].groups;
-+      *num_groups = bcm6362_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6362_rmw_mux(struct bcm6362_pinctrl *pctl, void __iomem *reg,
-+                          u32 mask, u32 val)
-+{
-+      unsigned long flags;
-+      u32 tmp;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      tmp = __raw_readl(reg);
-+      tmp &= ~mask;
-+      tmp |= val & mask;
-+      __raw_writel(tmp, reg);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm6362_set_gpio(struct bcm6362_pinctrl *pctl, unsigned pin)
-+{
-+      const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin];
-+      u32 mask = BIT(pin % 32);
-+
-+      if (desc->drv_data)
-+              bcm6362_rmw_mux(pctl, pctl->basemode, (u32)desc->drv_data, 0);
-+
-+      if (pin < 32) {
-+              /* base mode 0 => gpio 1 => mux function */
-+              bcm6362_rmw_mux(pctl, pctl->mode, mask, 0);
-+
-+              /* pins 0-23 might be muxed to led */
-+              if (pin < 24)
-+                      bcm6362_rmw_mux(pctl, pctl->led, mask, 0);
-+      } else {
-+              /* ctrl reg 0 => wifi function 1 => gpio */
-+              bcm6362_rmw_mux(pctl, pctl->ctrl, mask, mask);
-+      }
-+}
-+
-+static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6362_pingroup *grp = &bcm6362_groups[group];
-+      const struct bcm6362_function *f = &bcm6362_funcs[selector];
-+      unsigned i;
-+      void __iomem *reg;
-+      u32 val, mask;
-+
-+      for (i = 0; i < grp->num_pins; i++)
-+              bcm6362_set_gpio(pctl, grp->pins[i]);
-+
-+      switch (f->reg) {
-+      case BCM6362_LEDCTRL:
-+              reg = pctl->led;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM6362_MODE:
-+              reg = pctl->ctrl;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM6362_CTRL:
-+              reg = pctl->ctrl;
-+              mask = BIT(grp->pins[0]);
-+              val = 0;
-+              break;
-+      case BCM6362_BASEMODE:
-+              reg = pctl->basemode;
-+              mask = f->basemode_mask;
-+              val = f->basemode_mask;
-+              break;
-+      default:
-+              WARN_ON(1);
-+              return -EINVAL;
-+      }
-+
-+      bcm6362_rmw_mux(pctl, reg, mask, val);
-+
-+      return 0;
-+}
-+
-+static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      bcm6362_set_gpio(pctl, offset);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6362_pctl_ops = {
-+      .get_groups_count       = bcm6362_pinctrl_get_group_count,
-+      .get_group_name         = bcm6362_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6362_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6362_pmx_ops = {
-+      .get_functions_count    = bcm6362_pinctrl_get_func_count,
-+      .get_function_name      = bcm6362_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6362_pinctrl_get_groups,
-+      .set_mux                = bcm6362_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6362_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6362_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6362_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *led, *mode, *ctrl, *basemode;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
-+      led = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(led))
-+              return PTR_ERR(led);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-+      ctrl = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(ctrl))
-+              return PTR_ERR(ctrl);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
-+      basemode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(basemode))
-+              return PTR_ERR(basemode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->led = led;
-+      pctl->mode = mode;
-+      pctl->ctrl = ctrl;
-+      pctl->basemode = basemode;
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6362_pctl_ops;
-+      pctl->desc.pmxops = &bcm6362_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6362_pins);
-+      pctl->desc.pins = bcm6362_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6362_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6362_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6362-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6362_pinctrl_driver = {
-+      .probe = bcm6362_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6362-pinctrl",
-+              .of_match_table = bcm6362_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6362_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index e0a698f..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-From 30594cf9bfff176a9e4b14c50dcd8b9d0cc3edec Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:51 +0200
-Subject: [PATCH 10/16] Documentation: add BCM6368 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6368 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6368-pinctrl.txt      | 67 ++++++++++++++++++++++
- 1 file changed, 67 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
-@@ -0,0 +1,67 @@
-+* Broadcom BCM6368 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6368-pinctrl".
-+- reg: Register specifiers of dirout, dat, mode registers.
-+- reg-names: Must be "dirout", "dat", "mode".
-+- brcm,gpiobasemode: Phandle to the gpio basemode register.
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6368-pinctrl";
-+      reg = <0x10000080 0x08>,
-+            <0x10000088 0x08>,
-+            <0x10000098 0x04>;
-+      reg-names = "dirout", "dat", "mode";
-+      brcm,gpiobasemode = <&gpiobasemode>;
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+gpiobasemode: syscon@100000b8 {
-+      compatible = "brcm,bcm6368-gpiobasemode", "syscon";
-+      reg = <0x100000b8 4>;
-+      native-endian;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+gpio0         0       analog_afe0
-+gpio1         1       analog_afe1
-+gpio2         2       sys_irq
-+gpio3         3       serial_led_data
-+gpio4         4       serial_led_clk
-+gpio5         5       inet_led
-+gpio6         6       ephy0_led
-+gpio7         7       ephy1_led
-+gpio8         8       ephy2_led
-+gpio9         9       ephy3_led
-+gpio10                10      robosw_led_data
-+gpio11                11      robosw_led_clk
-+gpio12                12      robosw_led0
-+gpio13                13      robosw_led1
-+gpio14                14      usb_device_led
-+gpio15                15      -
-+gpio16                16      pci_req1
-+gpio17                17      pci_gnt1
-+gpio18                18      pci_intb
-+gpio19                19      pci_req0
-+gpio20                20      pci_gnt0
-+gpio21                21      -
-+gpio22                22      pcmcia_cd1
-+gpio23                23      pcmcia_cd2
-+gpio24                24      pcmcia_vs1
-+gpio25                25      pcmcia_vs2
-+gpio26                26      ebi_cs2
-+gpio27                27      ebi_cs3
-+gpio28                28      spi_cs2
-+gpio29                29      spi_cs3
-+gpio30                30      spi_cs4
-+gpio31                31      spi_cs5
-+uart1_grp     30-33   uart1
diff --git a/target/linux/bcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch b/target/linux/bcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch
deleted file mode 100644 (file)
index 6a9b9e0..0000000
+++ /dev/null
@@ -1,620 +0,0 @@
-From 90be3cb4f1a45b8be4a4ec264cd66c2f8e893fcb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:18:25 +0200
-Subject: [PATCH 11/16] pinctrl: add a pincontrol driver for BCM6368
-
-Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
-GPIOs onto alternative functions. Not all are documented.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |  15 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c | 573 ++++++++++++++++++++++++++++++
- 3 files changed, 589 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -30,3 +30,18 @@ config PINCTRL_BCM6362
-       select PINCONF
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6368
-+      bool "BCM6368 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
-+      select MFD_SYSCON
-+
-+config PINCTRL_BCM63268
-+      bool "BCM63268 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -3,3 +3,4 @@ obj-$(CONFIG_PINCTRL_BCM6328)  += pinctrl
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
- obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
-+obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
-@@ -0,0 +1,573 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/kernel.h>
-+#include <linux/gpio.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_gpio.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6368_NGPIO 38
-+
-+#define BCM6368_BASEMODE_MASK 0x7
-+#define BCM6368_BASEMODE_GPIO 0x0
-+#define BCM6368_BASEMODE_UART1        0x1
-+
-+struct bcm6368_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6368_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      unsigned dir_out:16;
-+      unsigned basemode:3;
-+};
-+
-+struct bcm6368_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+      struct regmap_field *overlay;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6368_BASEMODE_PIN(a, b)            \
-+      {                                       \
-+              .number = a,                    \
-+              .name = b,                      \
-+              .drv_data = (void *)true        \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6368_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      PINCTRL_PIN(8, "gpio8"),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      PINCTRL_PIN(12, "gpio12"),
-+      PINCTRL_PIN(13, "gpio13"),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      PINCTRL_PIN(27, "gpio27"),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      BCM6368_BASEMODE_PIN(30, "gpio30"),
-+      BCM6368_BASEMODE_PIN(31, "gpio31"),
-+      BCM6368_BASEMODE_PIN(32, "gpio32"),
-+      BCM6368_BASEMODE_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 };
-+
-+#define BCM6368_GROUP(n)                              \
-+      {                                               \
-+              .name = #n,                             \
-+              .pins = n##_pins,                       \
-+              .num_pins = ARRAY_SIZE(n##_pins),       \
-+      }
-+
-+static struct bcm6368_pingroup bcm6368_groups[] = {
-+      BCM6368_GROUP(gpio0),
-+      BCM6368_GROUP(gpio1),
-+      BCM6368_GROUP(gpio2),
-+      BCM6368_GROUP(gpio3),
-+      BCM6368_GROUP(gpio4),
-+      BCM6368_GROUP(gpio5),
-+      BCM6368_GROUP(gpio6),
-+      BCM6368_GROUP(gpio7),
-+      BCM6368_GROUP(gpio8),
-+      BCM6368_GROUP(gpio9),
-+      BCM6368_GROUP(gpio10),
-+      BCM6368_GROUP(gpio11),
-+      BCM6368_GROUP(gpio12),
-+      BCM6368_GROUP(gpio13),
-+      BCM6368_GROUP(gpio14),
-+      BCM6368_GROUP(gpio15),
-+      BCM6368_GROUP(gpio16),
-+      BCM6368_GROUP(gpio17),
-+      BCM6368_GROUP(gpio18),
-+      BCM6368_GROUP(gpio19),
-+      BCM6368_GROUP(gpio20),
-+      BCM6368_GROUP(gpio21),
-+      BCM6368_GROUP(gpio22),
-+      BCM6368_GROUP(gpio23),
-+      BCM6368_GROUP(gpio24),
-+      BCM6368_GROUP(gpio25),
-+      BCM6368_GROUP(gpio26),
-+      BCM6368_GROUP(gpio27),
-+      BCM6368_GROUP(gpio28),
-+      BCM6368_GROUP(gpio29),
-+      BCM6368_GROUP(gpio30),
-+      BCM6368_GROUP(gpio31),
-+      BCM6368_GROUP(uart1_grp),
-+};
-+
-+static const char * const analog_afe_0_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const analog_afe_1_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+      "gpio2",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio3",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio4",
-+};
-+
-+static const char * const inet_led_groups[] = {
-+      "gpio5",
-+};
-+
-+static const char * const ephy0_led_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const ephy1_led_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const ephy2_led_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const ephy3_led_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const robosw_led_data_groups[] = {
-+      "gpio10",
-+};
-+
-+static const char * const robosw_led_clk_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const robosw_led0_groups[] = {
-+      "gpio12",
-+};
-+
-+static const char * const robosw_led1_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+      "gpio14",
-+};
-+
-+static const char * const pci_req1_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const pci_gnt1_groups[] = {
-+      "gpio17",
-+};
-+
-+static const char * const pci_intb_groups[] = {
-+      "gpio18",
-+};
-+
-+static const char * const pci_req0_groups[] = {
-+      "gpio19",
-+};
-+
-+static const char * const pci_gnt0_groups[] = {
-+      "gpio20",
-+};
-+
-+static const char * const pcmcia_cd1_groups[] = {
-+      "gpio22",
-+};
-+
-+static const char * const pcmcia_cd2_groups[] = {
-+      "gpio23",
-+};
-+
-+static const char * const pcmcia_vs1_groups[] = {
-+      "gpio24",
-+};
-+
-+static const char * const pcmcia_vs2_groups[] = {
-+      "gpio25",
-+};
-+
-+static const char * const ebi_cs2_groups[] = {
-+      "gpio26",
-+};
-+
-+static const char * const ebi_cs3_groups[] = {
-+      "gpio27",
-+};
-+
-+static const char * const spi_cs2_groups[] = {
-+      "gpio28",
-+};
-+
-+static const char * const spi_cs3_groups[] = {
-+      "gpio29",
-+};
-+
-+static const char * const spi_cs4_groups[] = {
-+      "gpio30",
-+};
-+
-+static const char * const spi_cs5_groups[] = {
-+      "gpio31",
-+};
-+
-+static const char * const uart1_groups[] = {
-+      "uart1_grp",
-+};
-+
-+#define BCM6368_FUN(n, out)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .dir_out = out,                         \
-+      }
-+
-+#define BCM6368_BASEMODE_FUN(n, val, out)             \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .basemode = BCM6368_BASEMODE_##val,     \
-+              .dir_out = out,                         \
-+      }
-+
-+static const struct bcm6368_function bcm6368_funcs[] = {
-+      BCM6368_FUN(analog_afe_0, 1),
-+      BCM6368_FUN(analog_afe_1, 1),
-+      BCM6368_FUN(sys_irq, 1),
-+      BCM6368_FUN(serial_led_data, 1),
-+      BCM6368_FUN(serial_led_clk, 1),
-+      BCM6368_FUN(inet_led, 1),
-+      BCM6368_FUN(ephy0_led, 1),
-+      BCM6368_FUN(ephy1_led, 1),
-+      BCM6368_FUN(ephy2_led, 1),
-+      BCM6368_FUN(ephy3_led, 1),
-+      BCM6368_FUN(robosw_led_data, 1),
-+      BCM6368_FUN(robosw_led_clk, 1),
-+      BCM6368_FUN(robosw_led0, 1),
-+      BCM6368_FUN(robosw_led1, 1),
-+      BCM6368_FUN(usb_device_led, 1),
-+      BCM6368_FUN(pci_req1, 0),
-+      BCM6368_FUN(pci_gnt1, 0),
-+      BCM6368_FUN(pci_intb, 0),
-+      BCM6368_FUN(pci_req0, 0),
-+      BCM6368_FUN(pci_gnt0, 0),
-+      BCM6368_FUN(pcmcia_cd1, 0),
-+      BCM6368_FUN(pcmcia_cd2, 0),
-+      BCM6368_FUN(pcmcia_vs1, 0),
-+      BCM6368_FUN(pcmcia_vs2, 0),
-+      BCM6368_FUN(ebi_cs2, 1),
-+      BCM6368_FUN(ebi_cs3, 1),
-+      BCM6368_FUN(spi_cs2, 1),
-+      BCM6368_FUN(spi_cs3, 1),
-+      BCM6368_FUN(spi_cs4, 1),
-+      BCM6368_FUN(spi_cs5, 1),
-+      BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
-+};
-+
-+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6368_groups);
-+}
-+
-+static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6368_groups[group].name;
-+}
-+
-+static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6368_groups[group].pins;
-+      *num_pins = bcm6368_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6368_funcs);
-+}
-+
-+static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6368_funcs[selector].name;
-+}
-+
-+static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6368_funcs[selector].groups;
-+      *num_groups = bcm6368_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6368_rmw_mux(struct bcm6368_pinctrl *pctl, void __iomem *reg,
-+                          u32 mask, u32 val)
-+{
-+      u32 tmp;
-+
-+      tmp = __raw_readl(reg);
-+      tmp &= ~mask;
-+      tmp |= (val & mask);
-+      __raw_writel(tmp, reg);
-+}
-+
-+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6368_pingroup *grp = &bcm6368_groups[group];
-+      const struct bcm6368_function *fun = &bcm6368_funcs[selector];
-+      unsigned long flags;
-+      int i, pin;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      if (fun->basemode) {
-+              u32 mask = 0;
-+
-+              for (i = 0; i < grp->num_pins; i++) {
-+                      pin = grp->pins[i];
-+                      if (pin < 32)
-+                              mask |= BIT(pin);
-+              }
-+
-+              bcm6368_rmw_mux(pctl, pctl->mode, mask, 0);
-+              regmap_field_write(pctl->overlay, fun->basemode);
-+      } else {
-+              pin = grp->pins[0];
-+
-+              if (bcm6368_pins[pin].drv_data)
-+                      regmap_field_write(pctl->overlay,
-+                                         BCM6368_BASEMODE_GPIO);
-+
-+              bcm6368_rmw_mux(pctl, pctl->mode, BIT(pin), BIT(pin));
-+      }
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+
-+      for (pin = 0; pin < grp->num_pins; pin++) {
-+              int hw_gpio = bcm6368_pins[pin].number;
-+              struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
-+
-+              if (fun->dir_out & BIT(pin))
-+                      gc->direction_output(gc, hw_gpio % 32, 0);
-+              else
-+                      gc->direction_input(gc, hw_gpio % 32);
-+      }
-+
-+      return 0;
-+}
-+
-+static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      unsigned long flags;
-+
-+      if (offset >= 32 && !bcm6368_pins[offset].drv_data)
-+              return 0;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      /* disable all functions using this pin */
-+      if (offset < 32)
-+              bcm6368_rmw_mux(pctl, pctl->mode, BIT(offset), 0);
-+
-+      if (bcm6368_pins[offset].drv_data)
-+              regmap_field_write(pctl->overlay, BCM6368_BASEMODE_GPIO);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6368_pctl_ops = {
-+      .get_groups_count       = bcm6368_pinctrl_get_group_count,
-+      .get_group_name         = bcm6368_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6368_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6368_pmx_ops = {
-+      .get_functions_count    = bcm6368_pinctrl_get_func_count,
-+      .get_function_name      = bcm6368_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6368_pinctrl_get_groups,
-+      .set_mux                = bcm6368_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6368_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6368_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6368_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode;
-+      struct regmap *basemode;
-+      struct reg_field overlay = REG_FIELD(0, 0, 3);
-+
-+      if (pdev->dev.of_node)
-+              basemode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+                                                         "brcm,gpiobasemode");
-+      else
-+              basemode = syscon_regmap_lookup_by_pdevname("syscon.b00000b8");
-+
-+      if (IS_ERR(basemode))
-+              return PTR_ERR(basemode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      pctl->overlay = devm_regmap_field_alloc(&pdev->dev, basemode, overlay);
-+      if (IS_ERR(pctl->overlay))
-+              return PTR_ERR(pctl->overlay);
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+
-+      /* disable all muxes by default */
-+      __raw_writel(0, pctl->mode);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6368_pctl_ops;
-+      pctl->desc.pmxops = &bcm6368_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6368_pins);
-+      pctl->desc.pins = bcm6368_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6368_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6368_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6368-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6368_pinctrl_driver = {
-+      .probe = bcm6368_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6368-pinctrl",
-+              .of_match_table = bcm6368_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6368_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch b/target/linux/bcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch
deleted file mode 100644 (file)
index ffe842f..0000000
+++ /dev/null
@@ -1,106 +0,0 @@
-From 28cc80e4ada5d73d5305fd268297825cd8d01936 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:37:08 +0200
-Subject: [PATCH 12/16] Documentation: add BCM63268 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in the BCM63268
-family SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm63268-pinctrl.txt     | 88 ++++++++++++++++++++++
- 1 file changed, 88 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
-@@ -0,0 +1,88 @@
-+* Broadcom BCM63268 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6362-pinctrl".
-+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
-+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@100000c0 {
-+      compatible = "brcm,bcm63268-pinctrl";
-+      reg = <0x100000c0 0x8>,
-+            <0x100000c8 0x8>,
-+            <0x100000d0 0x4>,
-+            <0x100000d8 0x4>,
-+            <0x100000dc 0x4>,
-+            <0x100000f8 0x4>;
-+      reg-names = "dirout", "dat", "led", "mode",
-+                  "ctrl", "basemode";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins            functions
-+-----------------------------------------------------------
-+gpio0         0               led, serial_led_clk
-+gpio1         1               led, serial_led_data
-+gpio2         2               led,
-+gpio3         3               led,
-+gpio4         4               led,
-+gpio5         5               led,
-+gpio6         6               led,
-+gpio7         7               led,
-+gpio8         8               led, hsspi_cs6
-+gpio9         9               led, hsspi_cs7
-+gpio10                10              led, uart1_scts
-+gpio11                11              led, uart1_srts
-+gpio12                12              led, uart1_sdin
-+gpio13                13              led, uart1_sdout
-+gpio14                14              led, ntr_pulse_in
-+gpio15                15              led, dsl_ntr_pulse_out
-+gpio16                16              led, hsspi_cs4
-+gpio17                17              led, hsspi_cs5
-+gpio18                18              led, adsl_spi_miso
-+gpio19                19              led, adsl_spi_mosi
-+gpio20                20              led,
-+gpio21                21              led,
-+gpio22                22              led, vreg_clk
-+gpio23                23              led, pcie_clkreq_b
-+gpio24                24              uart1_scts
-+gpio25                25              uart1_srts
-+gpio26                26              uart1_sdin
-+gpio27                27              uart1_sdout
-+gpio28                28              ntr_pulse_in
-+gpio29                29              dsl_ntr_pulse_out
-+gpio30                30              switch_led_clk
-+gpio31                31              switch_led_data
-+gpio32                32              wifi
-+gpio33                33              wifi
-+gpio34                34              wifi
-+gpio35                35              wifi
-+gpio36                36              wifi
-+gpio37                37              wifi
-+gpio38                38              wifi
-+gpio39                39              wifi
-+gpio40                40              wifi
-+gpio41                41              wifi
-+gpio42                42              wifi
-+gpio43                43              wifi
-+gpio44                44              wifi
-+gpio45                45              wifi
-+gpio46                46              wifi
-+gpio47                47              wifi
-+gpio48                48              wifi
-+gpio49                49              wifi
-+gpio50                50              wifi
-+gpio51                51              wifi
-+nand_grp      2-7,24-31       nand
-+dect_pd_grp   8-9             dect_pd
-+vdsl_phy0_grp 10-11           vdsl_phy0
-+vdsl_phy1_grp 12-13           vdsl_phy1
-+vdsl_phy2_grp 24-25           vdsl_phy2
-+vdsl_phy3_grp 26-27           vdsl_phy3
diff --git a/target/linux/bcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch
deleted file mode 100644 (file)
index 089d14e..0000000
+++ /dev/null
@@ -1,736 +0,0 @@
-From 8665d3ea63649cc155286c75f83f694a930580e5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:19:12 +0200
-Subject: [PATCH 13/16] pinctrl: add a pincontrol driver for BCM63268
-
-Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
-to different functions. Depending on the mux, these are either single
-pin configurations or whole pin groups.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Makefile           |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c | 710 +++++++++++++++++++++++++++++
- 2 files changed, 711 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
-
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_PINCTRL_BCM6348)  += pinctrl
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
- obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
- obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
-+obj-$(CONFIG_PINCTRL_BCM63268)        += pinctrl-bcm63268.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
-@@ -0,0 +1,710 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM63268_NGPIO                        52
-+
-+/* GPIO_BASEMODE register */
-+#define BASEMODE_NAND                 BIT(2) /* GPIOs 2-7, 24-31 */
-+#define BASEMODE_GPIO35                       BIT(4) /* GPIO 35 */
-+#define BASEMODE_DECTPD                       BIT(5) /* GPIOs 8/9 */
-+#define BASEMODE_VDSL_PHY_0           BIT(6) /* GPIOs 10/11 */
-+#define BASEMODE_VDSL_PHY_1           BIT(7) /* GPIOs 12/13 */
-+#define BASEMODE_VDSL_PHY_2           BIT(8) /* GPIOs 24/25 */
-+#define BASEMODE_VDSL_PHY_3           BIT(9) /* GPIOs 26/27 */
-+
-+enum bcm63268_pinctrl_reg {
-+      BCM63268_LEDCTRL,
-+      BCM63268_MODE,
-+      BCM63268_CTRL,
-+      BCM63268_BASEMODE,
-+};
-+
-+struct bcm63268_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm63268_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      enum bcm63268_pinctrl_reg reg;
-+      u32 mask;
-+};
-+
-+struct bcm63268_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *led;
-+      void __iomem *mode;
-+      void __iomem *ctrl;
-+      void __iomem *basemode;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM63268_PIN(a, b, basemode)                  \
-+      {                                               \
-+              .number = a,                            \
-+              .name = b,                              \
-+              .drv_data = (void *)(basemode)          \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm63268_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      BCM63268_PIN(2, "gpio2", BASEMODE_NAND),
-+      BCM63268_PIN(3, "gpio3", BASEMODE_NAND),
-+      BCM63268_PIN(4, "gpio4", BASEMODE_NAND),
-+      BCM63268_PIN(5, "gpio5", BASEMODE_NAND),
-+      BCM63268_PIN(6, "gpio6", BASEMODE_NAND),
-+      BCM63268_PIN(7, "gpio7", BASEMODE_NAND),
-+      BCM63268_PIN(8, "gpio8", BASEMODE_DECTPD),
-+      BCM63268_PIN(9, "gpio9", BASEMODE_DECTPD),
-+      BCM63268_PIN(10, "gpio10", BASEMODE_VDSL_PHY_0),
-+      BCM63268_PIN(11, "gpio11", BASEMODE_VDSL_PHY_0),
-+      BCM63268_PIN(12, "gpio12", BASEMODE_VDSL_PHY_1),
-+      BCM63268_PIN(13, "gpio13", BASEMODE_VDSL_PHY_1),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      BCM63268_PIN(24, "gpio24", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
-+      BCM63268_PIN(25, "gpio25", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
-+      BCM63268_PIN(26, "gpio26", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
-+      BCM63268_PIN(27, "gpio27", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
-+      BCM63268_PIN(28, "gpio28", BASEMODE_NAND),
-+      BCM63268_PIN(29, "gpio29", BASEMODE_NAND),
-+      BCM63268_PIN(30, "gpio30", BASEMODE_NAND),
-+      BCM63268_PIN(31, "gpio31", BASEMODE_NAND),
-+      PINCTRL_PIN(32, "gpio32"),
-+      PINCTRL_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+      PINCTRL_PIN(40, "gpio40"),
-+      PINCTRL_PIN(41, "gpio41"),
-+      PINCTRL_PIN(42, "gpio42"),
-+      PINCTRL_PIN(43, "gpio43"),
-+      PINCTRL_PIN(44, "gpio44"),
-+      PINCTRL_PIN(45, "gpio45"),
-+      PINCTRL_PIN(46, "gpio46"),
-+      PINCTRL_PIN(47, "gpio47"),
-+      PINCTRL_PIN(48, "gpio48"),
-+      PINCTRL_PIN(49, "gpio49"),
-+      PINCTRL_PIN(50, "gpio50"),
-+      PINCTRL_PIN(51, "gpio51"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+static unsigned gpio48_pins[] = { 48 };
-+static unsigned gpio49_pins[] = { 49 };
-+static unsigned gpio50_pins[] = { 50 };
-+static unsigned gpio51_pins[] = { 51 };
-+
-+static unsigned nand_grp_pins[] = {
-+      2, 3, 4, 5, 6, 7, 24,
-+      25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned dectpd_grp_pins[] = { 8, 9 };
-+static unsigned vdsl_phy0_grp_pins[] = { 10, 11 };
-+static unsigned vdsl_phy1_grp_pins[] = { 12, 13 };
-+static unsigned vdsl_phy2_grp_pins[] = { 24, 25 };
-+static unsigned vdsl_phy3_grp_pins[] = { 26, 27 };
-+
-+#define BCM63268_GROUP(n)                                     \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+      }
-+
-+static struct bcm63268_pingroup bcm63268_groups[] = {
-+      BCM63268_GROUP(gpio0),
-+      BCM63268_GROUP(gpio1),
-+      BCM63268_GROUP(gpio2),
-+      BCM63268_GROUP(gpio3),
-+      BCM63268_GROUP(gpio4),
-+      BCM63268_GROUP(gpio5),
-+      BCM63268_GROUP(gpio6),
-+      BCM63268_GROUP(gpio7),
-+      BCM63268_GROUP(gpio8),
-+      BCM63268_GROUP(gpio9),
-+      BCM63268_GROUP(gpio10),
-+      BCM63268_GROUP(gpio11),
-+      BCM63268_GROUP(gpio12),
-+      BCM63268_GROUP(gpio13),
-+      BCM63268_GROUP(gpio14),
-+      BCM63268_GROUP(gpio15),
-+      BCM63268_GROUP(gpio16),
-+      BCM63268_GROUP(gpio17),
-+      BCM63268_GROUP(gpio18),
-+      BCM63268_GROUP(gpio19),
-+      BCM63268_GROUP(gpio20),
-+      BCM63268_GROUP(gpio21),
-+      BCM63268_GROUP(gpio22),
-+      BCM63268_GROUP(gpio23),
-+      BCM63268_GROUP(gpio24),
-+      BCM63268_GROUP(gpio25),
-+      BCM63268_GROUP(gpio26),
-+      BCM63268_GROUP(gpio27),
-+      BCM63268_GROUP(gpio28),
-+      BCM63268_GROUP(gpio29),
-+      BCM63268_GROUP(gpio30),
-+      BCM63268_GROUP(gpio31),
-+      BCM63268_GROUP(gpio32),
-+      BCM63268_GROUP(gpio33),
-+      BCM63268_GROUP(gpio34),
-+      BCM63268_GROUP(gpio35),
-+      BCM63268_GROUP(gpio36),
-+      BCM63268_GROUP(gpio37),
-+      BCM63268_GROUP(gpio38),
-+      BCM63268_GROUP(gpio39),
-+      BCM63268_GROUP(gpio40),
-+      BCM63268_GROUP(gpio41),
-+      BCM63268_GROUP(gpio42),
-+      BCM63268_GROUP(gpio43),
-+      BCM63268_GROUP(gpio44),
-+      BCM63268_GROUP(gpio45),
-+      BCM63268_GROUP(gpio46),
-+      BCM63268_GROUP(gpio47),
-+      BCM63268_GROUP(gpio48),
-+      BCM63268_GROUP(gpio49),
-+      BCM63268_GROUP(gpio50),
-+      BCM63268_GROUP(gpio51),
-+
-+      /* multi pin groups */
-+      BCM63268_GROUP(nand_grp),
-+      BCM63268_GROUP(dectpd_grp),
-+      BCM63268_GROUP(vdsl_phy0_grp),
-+      BCM63268_GROUP(vdsl_phy1_grp),
-+      BCM63268_GROUP(vdsl_phy2_grp),
-+      BCM63268_GROUP(vdsl_phy3_grp),
-+};
-+
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const hsspi_cs4_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const hsspi_cs5_groups[] = {
-+      "gpio17",
-+};
-+
-+static const char * const hsspi_cs6_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const hsspi_cs7_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const uart1_scts_groups[] = {
-+      "gpio10",
-+      "gpio24",
-+};
-+
-+static const char * const uart1_srts_groups[] = {
-+      "gpio11",
-+      "gpio25",
-+};
-+
-+static const char * const uart1_sdin_groups[] = {
-+      "gpio12",
-+      "gpio26",
-+};
-+
-+static const char * const uart1_sdout_groups[] = {
-+      "gpio13",
-+      "gpio27",
-+};
-+
-+static const char * const ntr_pulse_in_groups[] = {
-+      "gpio14",
-+      "gpio28",
-+};
-+
-+static const char * const dsl_ntr_pulse_out_groups[] = {
-+      "gpio15",
-+      "gpio29",
-+};
-+
-+static const char * const adsl_spi_miso_groups[] = {
-+      "gpio18",
-+};
-+
-+static const char * const adsl_spi_mosi_groups[] = {
-+      "gpio19",
-+};
-+
-+static const char * const vreg_clk_groups[] = {
-+      "gpio22",
-+};
-+
-+static const char * const pcie_clkreq_b_groups[] = {
-+      "gpio23",
-+};
-+
-+static const char * const switch_led_clk_groups[] = {
-+      "gpio30",
-+};
-+
-+static const char * const switch_led_data_groups[] = {
-+      "gpio31",
-+};
-+
-+static const char * const wifi_groups[] = {
-+      "gpio32",
-+      "gpio33",
-+      "gpio34",
-+      "gpio35",
-+      "gpio36",
-+      "gpio37",
-+      "gpio38",
-+      "gpio39",
-+      "gpio40",
-+      "gpio41",
-+      "gpio42",
-+      "gpio43",
-+      "gpio44",
-+      "gpio45",
-+      "gpio46",
-+      "gpio47",
-+      "gpio48",
-+      "gpio49",
-+      "gpio50",
-+      "gpio51",
-+};
-+
-+static const char * const nand_groups[] = {
-+      "nand_grp",
-+};
-+
-+static const char * const dectpd_groups[] = {
-+      "dectpd_grp",
-+};
-+
-+static const char * const vdsl_phy_override_0_groups[] = {
-+      "vdsl_phy_override_0_grp",
-+};
-+
-+static const char * const vdsl_phy_override_1_groups[] = {
-+      "vdsl_phy_override_1_grp",
-+};
-+
-+static const char * const vdsl_phy_override_2_groups[] = {
-+      "vdsl_phy_override_2_grp",
-+};
-+
-+static const char * const vdsl_phy_override_3_groups[] = {
-+      "vdsl_phy_override_3_grp",
-+};
-+
-+#define BCM63268_LED_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_LEDCTRL,                \
-+      }
-+
-+#define BCM63268_MODE_FUN(n)                          \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_MODE,                   \
-+      }
-+
-+#define BCM63268_CTRL_FUN(n)                          \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_CTRL,                   \
-+      }
-+
-+#define BCM63268_BASEMODE_FUN(n, val)                 \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_BASEMODE,               \
-+              .mask = val,                            \
-+      }
-+
-+static const struct bcm63268_function bcm63268_funcs[] = {
-+      BCM63268_LED_FUN(led),
-+      BCM63268_MODE_FUN(serial_led_clk),
-+      BCM63268_MODE_FUN(serial_led_data),
-+      BCM63268_MODE_FUN(hsspi_cs6),
-+      BCM63268_MODE_FUN(hsspi_cs7),
-+      BCM63268_MODE_FUN(uart1_scts),
-+      BCM63268_MODE_FUN(uart1_srts),
-+      BCM63268_MODE_FUN(uart1_sdin),
-+      BCM63268_MODE_FUN(uart1_sdout),
-+      BCM63268_MODE_FUN(ntr_pulse_in),
-+      BCM63268_MODE_FUN(dsl_ntr_pulse_out),
-+      BCM63268_MODE_FUN(hsspi_cs4),
-+      BCM63268_MODE_FUN(hsspi_cs5),
-+      BCM63268_MODE_FUN(adsl_spi_miso),
-+      BCM63268_MODE_FUN(adsl_spi_mosi),
-+      BCM63268_MODE_FUN(vreg_clk),
-+      BCM63268_MODE_FUN(pcie_clkreq_b),
-+      BCM63268_MODE_FUN(switch_led_clk),
-+      BCM63268_MODE_FUN(switch_led_data),
-+      BCM63268_CTRL_FUN(wifi),
-+      BCM63268_BASEMODE_FUN(nand, BASEMODE_NAND),
-+      BCM63268_BASEMODE_FUN(dectpd, BASEMODE_DECTPD),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_0, BASEMODE_VDSL_PHY_0),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_1, BASEMODE_VDSL_PHY_1),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_2, BASEMODE_VDSL_PHY_2),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_3, BASEMODE_VDSL_PHY_3),
-+};
-+
-+static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm63268_groups);
-+}
-+
-+static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                 unsigned group)
-+{
-+      return bcm63268_groups[group].name;
-+}
-+
-+static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                         unsigned group,
-+                                         const unsigned **pins,
-+                                         unsigned *num_pins)
-+{
-+      *pins = bcm63268_groups[group].pins;
-+      *num_pins = bcm63268_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm63268_funcs);
-+}
-+
-+static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                                unsigned selector)
-+{
-+      return bcm63268_funcs[selector].name;
-+}
-+
-+static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                     unsigned selector,
-+                                     const char * const **groups,
-+                                     unsigned * const num_groups)
-+{
-+      *groups = bcm63268_funcs[selector].groups;
-+      *num_groups = bcm63268_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm63268_rmw_mux(struct bcm63268_pinctrl *pctl, void __iomem *reg,
-+                           u32 mask, u32 val)
-+{
-+      unsigned long flags;
-+      u32 tmp;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      tmp = __raw_readl(reg);
-+      tmp &= ~mask;
-+      tmp |= val;
-+      __raw_writel(tmp, reg);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm63268_set_gpio(struct bcm63268_pinctrl *pctl, unsigned pin)
-+{
-+      const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin];
-+      u32 basemode = (unsigned long)desc->drv_data;
-+      u32 mask = BIT(pin % 32);
-+
-+      if (basemode)
-+              bcm63268_rmw_mux(pctl, pctl->basemode, basemode, 0);
-+
-+      if (pin < 32) {
-+              /* base mode: 0 => gpio, 1 => mux function */
-+              bcm63268_rmw_mux(pctl, pctl->mode, mask, 0);
-+
-+              /* pins 0-23 might be muxed to led */
-+              if (pin < 24)
-+                      bcm63268_rmw_mux(pctl, pctl->led, mask, 0);
-+      } else if (pin < 52) {
-+              /* ctrl reg: 0 => wifi function, 1 => gpio */
-+              bcm63268_rmw_mux(pctl, pctl->ctrl, mask, mask);
-+      }
-+}
-+
-+static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                  unsigned selector, unsigned group)
-+{
-+      struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm63268_pingroup *grp = &bcm63268_groups[group];
-+      const struct bcm63268_function *f = &bcm63268_funcs[selector];
-+      unsigned i;
-+      void __iomem *reg;
-+      u32 val, mask;
-+
-+      for (i = 0; i < grp->num_pins; i++)
-+              bcm63268_set_gpio(pctl, grp->pins[i]);
-+
-+      switch (f->reg) {
-+      case BCM63268_LEDCTRL:
-+              reg = pctl->led;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM63268_MODE:
-+              reg = pctl->mode;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM63268_CTRL:
-+              reg = pctl->ctrl;
-+              mask = BIT(grp->pins[0]);
-+              val = 0;
-+              break;
-+      case BCM63268_BASEMODE:
-+              reg = pctl->basemode;
-+              mask = f->mask;
-+              val = f->mask;
-+              break;
-+      default:
-+              WARN_ON(1);
-+              return -EINVAL;
-+      }
-+
-+      bcm63268_rmw_mux(pctl, reg, mask, val);
-+
-+      return 0;
-+}
-+
-+static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                      struct pinctrl_gpio_range *range,
-+                                      unsigned offset)
-+{
-+      struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      bcm63268_set_gpio(pctl, offset);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm63268_pctl_ops = {
-+      .get_groups_count       = bcm63268_pinctrl_get_group_count,
-+      .get_group_name         = bcm63268_pinctrl_get_group_name,
-+      .get_group_pins         = bcm63268_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm63268_pmx_ops = {
-+      .get_functions_count    = bcm63268_pinctrl_get_func_count,
-+      .get_function_name      = bcm63268_pinctrl_get_func_name,
-+      .get_function_groups    = bcm63268_pinctrl_get_groups,
-+      .set_mux                = bcm63268_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm63268_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm63268_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm63268_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *led, *mode, *ctrl, *basemode;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
-+      led = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(led))
-+              return PTR_ERR(led);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-+      ctrl = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(ctrl))
-+              return PTR_ERR(ctrl);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
-+      basemode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(basemode))
-+              return PTR_ERR(basemode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->led = led;
-+      pctl->mode = mode;
-+      pctl->ctrl = ctrl;
-+      pctl->basemode = basemode;
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm63268_pctl_ops;
-+      pctl->desc.pmxops = &bcm63268_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm63268_pins);
-+      pctl->desc.pins = bcm63268_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM63268_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm63268_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm63268-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm63268_pinctrl_driver = {
-+      .probe = bcm63268_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm63268-pinctrl",
-+              .of_match_table = bcm63268_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm63268_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch b/target/linux/bcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch
deleted file mode 100644 (file)
index bbd3981..0000000
+++ /dev/null
@@ -1,134 +0,0 @@
-From e058fa1969019c2f6705c53c4130e364a877d4e6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 26 Nov 2017 12:07:31 +0100
-Subject: [PATCH] gpio: fix device tree gpio hogs on dual role gpio/pincontrol
- controllers
-
-For dual role gpio and pincontrol controller, the device registration
-path is often:
-
-  pinctrl_register(...);
-  gpiochip_add_data(...);
-  gpiochip_add_pin_range(...);
-
-If the device tree node has any gpio-hogs, the code will try to apply them
-in the gpiochip_add_data step, but fail as they cannot be requested, as the
-ranges are missing. But we also cannot first add the pinranges, as the
-appropriate data structures are only initialized in gpiochip_add_data.
-
-To fix this, defer gpio-hogs to the time pin ranges get added instead of
-directly at chip request time, if the gpio-chip has a request method.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-
- drivers/gpio/gpiolib-of.c | 20 +++++++++++++++-----
- drivers/gpio/gpiolib.c    |  5 +++--
- drivers/gpio/gpiolib.h    |  8 ++++++++
- 3 files changed, 26 insertions(+), 7 deletions(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -237,12 +237,15 @@ static struct gpio_desc *of_parse_own_gp
- /**
-  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
-  * @chip:     gpio chip to act on
-+ * @start:    first gpio to check
-+ * @num:      number of gpios to check
-  *
-- * This is only used by of_gpiochip_add to request/set GPIO initial
-- * configuration.
-+ * This is used by of_gpiochip_add, gpiochip_add_pingroup_range and
-+ * gpiochip_add_pin_range to request/set GPIO initial configuration.
-  * It returns error if it fails otherwise 0 on success.
-  */
--static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
-+int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
-+                         unsigned int num)
- {
-       struct gpio_desc *desc = NULL;
-       struct device_node *np;
-@@ -250,7 +253,7 @@ static int of_gpiochip_scan_gpios(struct
-       enum gpio_lookup_flags lflags;
-       enum gpiod_flags dflags;
-       unsigned int i;
--      int ret;
-+      int ret, hwgpio;
-       for_each_available_child_of_node(chip->of_node, np) {
-               if (!of_property_read_bool(np, "gpio-hog"))
-@@ -262,6 +265,10 @@ static int of_gpiochip_scan_gpios(struct
-                       if (IS_ERR(desc))
-                               break;
-+                      hwgpio = gpio_chip_hwgpio(desc);
-+                      if (hwgpio < start || hwgpio >= (start + num))
-+                              continue;
-+
-                       ret = gpiod_hog(desc, name, lflags, dflags);
-                       if (ret < 0) {
-                               of_node_put(np);
-@@ -499,12 +506,13 @@ int of_gpiochip_add(struct gpio_chip *ch
-       of_node_get(chip->of_node);
--      status = of_gpiochip_scan_gpios(chip);
--      if (status) {
--              of_node_put(chip->of_node);
--              gpiochip_remove_pin_ranges(chip);
-+      if (!chip->request) {
-+              status = of_gpiochip_scan_gpios(chip, 0, chip->ngpio);
-+              if (status) {
-+                      of_node_put(chip->of_node);
-+                      gpiochip_remove_pin_ranges(chip);
-+              }
-       }
--
-       return status;
- }
---- a/drivers/gpio/gpiolib.c
-+++ b/drivers/gpio/gpiolib.c
-@@ -1958,7 +1958,8 @@ int gpiochip_add_pingroup_range(struct g
-       list_add_tail(&pin_range->node, &gdev->pin_ranges);
--      return 0;
-+      return of_gpiochip_scan_gpios(chip, gpio_offset,
-+                                    pin_range->range.npins);
- }
- EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
-@@ -2010,7 +2011,7 @@ int gpiochip_add_pin_range(struct gpio_c
-       list_add_tail(&pin_range->node, &gdev->pin_ranges);
--      return 0;
-+      return of_gpiochip_scan_gpios(chip, gpio_offset, npins);
- }
- EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
---- a/drivers/gpio/gpiolib.h
-+++ b/drivers/gpio/gpiolib.h
-@@ -99,6 +99,8 @@ struct gpio_desc *of_get_named_gpiod_fla
-                  const char *list_name, int index, enum of_gpio_flags *flags);
- int of_gpiochip_add(struct gpio_chip *gc);
- void of_gpiochip_remove(struct gpio_chip *gc);
-+int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
-+                         unsigned int num);
- #else
- static inline struct gpio_desc *of_find_gpio(struct device *dev,
-                                            const char *con_id,
-@@ -114,6 +116,12 @@ static inline struct gpio_desc *of_get_n
- }
- static inline int of_gpiochip_add(struct gpio_chip *gc) { return 0; }
- static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
-+static inline int of_gpiochip_scan_gpios(struct gpio_chip *chip,
-+                                       unsigned int start,
-+                                       unsigned int num)
-+{
-+      return 0;
-+}
- #endif /* CONFIG_OF_GPIO */
- #ifdef CONFIG_ACPI
diff --git a/target/linux/bcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/bcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
deleted file mode 100644 (file)
index e7ebb0b..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 19 Jan 2014 12:18:03 +0100
-Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
-
-In the same way as the ohci platform driver allows limiting ports,
-enable the same for ehci. This prevents a mismatch in the available
-ports between ehci/ohci on USB 2.0 controllers.
-
-This is needed if the USB host controller always reports the maximum
-number of ports regardless of the number of available ports (because
-one might be set to be usb device).
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      | 4 ++++
- drivers/usb/host/ehci-platform.c | 2 ++
- drivers/usb/host/ehci.h          | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 4 files changed, 8 insertions(+)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -678,6 +678,10 @@ int ehci_setup(struct usb_hcd *hcd)
-       /* cache this readonly data; minimize chip reads */
-       ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+      if (ehci->num_ports) {
-+              ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
-+              ehci->hcs_params |= ehci->num_ports;
-+      }
-       ehci->sbrn = HCD_USB2;
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -62,6 +62,9 @@ static int ehci_platform_reset(struct us
-       ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
-+      if (pdata->num_ports && pdata->num_ports <= 15)
-+              ehci->num_ports = pdata->num_ports;
-+
-       if (pdata->pre_setup) {
-               retval = pdata->pre_setup(hcd);
-               if (retval < 0)
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -216,6 +216,7 @@ struct ehci_hcd {                  /* one per controlle
-       u32                     command;
-       /* SILICON QUIRKS */
-+      unsigned int            num_ports;
-       unsigned                no_selective_suspend:1;
-       unsigned                has_fsl_port_bug:1; /* FreeScale */
-       unsigned                has_fsl_hs_errata:1;    /* Freescale HS quirk */
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -42,6 +42,7 @@ struct usb_hcd;
-  */
- struct usb_ehci_pdata {
-       int             caps_offset;
-+      unsigned int    num_ports;
-       unsigned        has_tt:1;
-       unsigned        has_synopsys_hc_bug:1;
-       unsigned        big_endian_desc:1;
diff --git a/target/linux/bcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch b/target/linux/bcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
deleted file mode 100644 (file)
index 90b1640..0000000
+++ /dev/null
@@ -1,484 +0,0 @@
-From 5a50cb0d53344a2429831b00925d6183d4d332e1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 03:54:05 +0100
-Subject: [PATCH 40/44] MIPS: BCM63XX: move device registration code into its
- own file
-
-Move device registration code into its own file to allow sharing it
-between board implementations.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Makefile         |   1 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 188 +-------------------------
- arch/mips/bcm63xx/boards/board_common.c   | 215 ++++++++++++++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |   8 ++
- 4 files changed, 223 insertions(+), 183 deletions(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_common.c
- create mode 100644 arch/mips/bcm63xx/boards/board_common.h
-
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1 +1,2 @@
-+obj-y                                 += board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,33 +12,21 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
--#include <linux/platform_device.h>
--#include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_nvram.h>
--#include <bcm63xx_dev_pci.h>
--#include <bcm63xx_dev_enet.h>
--#include <bcm63xx_dev_flash.h>
--#include <bcm63xx_dev_hsspi.h>
--#include <bcm63xx_dev_pcmcia.h>
--#include <bcm63xx_dev_spi.h>
--#include <bcm63xx_dev_usb_ehci.h>
--#include <bcm63xx_dev_usb_ohci.h>
--#include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include "board_common.h"
-+
- #include <uapi/linux/bcm933xx_hcs.h>
- #define HCS_OFFSET_128K                       0x20000
--static struct board_info board;
--
- /*
-  * known 3368 boards
-  */
-@@ -695,52 +683,6 @@ static const struct board_info __initcon
- };
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--      .revision               = 0x02,
--      .board_rev              = 0x17,
--      .country_code           = 0x0,
--      .ant_available_bg       = 0x3,
--      .pa0b0                  = 0x15ae,
--      .pa0b1                  = 0xfa85,
--      .pa0b2                  = 0xfe8d,
--      .pa1b0                  = 0xffff,
--      .pa1b1                  = 0xffff,
--      .pa1b2                  = 0xffff,
--      .gpio0                  = 0xff,
--      .gpio1                  = 0xff,
--      .gpio2                  = 0xff,
--      .gpio3                  = 0xff,
--      .maxpwr_bg              = 0x004c,
--      .itssi_bg               = 0x00,
--      .boardflags_lo          = 0x2848,
--      .boardflags_hi          = 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--      if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--              return 0;
--      } else {
--              pr_err("unable to fill SPROM for given bustype\n");
--              return -EINVAL;
--      }
--}
--#endif
--
--/*
-- * return board name for /proc/cpuinfo
-- */
--const char *board_get_name(void)
--{
--      return board.name;
--}
--
--/*
-  * early init callback, read nvram data from flash and checksum it
-  */
- void __init board_prom_init(void)
-@@ -785,137 +727,15 @@ void __init board_prom_init(void)
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
-                       continue;
-               /* copy, board desc array is marked initdata */
--              memcpy(&board, bcm963xx_boards[i], sizeof(board));
-+              board_early_setup(bcm963xx_boards[i]);
-               break;
-       }
--      /* bail out if board is not found, will complain later */
--      if (!board.name[0]) {
-+      /* warn if board is not found, will complain later */
-+      if (i == ARRAY_SIZE(bcm963xx_boards)) {
-               char name[17];
-               memcpy(name, board_name, 16);
-               name[16] = 0;
-               pr_err("unknown bcm963xx board: %s\n", name);
--              return;
--      }
--
--      /* setup pin multiplexing depending on board enabled device,
--       * this has to be done this early since PCI init is done
--       * inside arch_initcall */
--      val = 0;
--
--#ifdef CONFIG_PCI
--      if (board.has_pci) {
--              bcm63xx_pci_enabled = 1;
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G2_PCI;
-       }
--#endif
--
--      if (board.has_pccard) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
--      }
--
--      if (board.has_enet0 && !board.enet0.use_internal_phy) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G3_EXT_MII |
--                              GPIO_MODE_6348_G0_EXT_MII;
--      }
--
--      if (board.has_enet1 && !board.enet1.use_internal_phy) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G3_EXT_MII |
--                              GPIO_MODE_6348_G0_EXT_MII;
--      }
--
--      bcm_gpio_writel(val, GPIO_MODE_REG);
--}
--
--/*
-- * second stage init callback, good time to panic if we couldn't
-- * identify on which board we're running since early printk is working
-- */
--void __init board_setup(void)
--{
--      if (!board.name[0])
--              panic("unable to detect bcm963xx board");
--      pr_info("board name: %s\n", board.name);
--
--      /* make sure we're running on expected cpu */
--      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
--              panic("unexpected CPU for bcm963xx board");
--}
--
--static struct gpio_led_platform_data bcm63xx_led_data;
--
--static struct platform_device bcm63xx_gpio_leds = {
--      .name                   = "leds-gpio",
--      .id                     = 0,
--      .dev.platform_data      = &bcm63xx_led_data,
--};
--
--/*
-- * third stage init callback, register all board devices.
-- */
--int __init board_register_devices(void)
--{
--      if (board.has_uart0)
--              bcm63xx_uart_register(0);
--
--      if (board.has_uart1)
--              bcm63xx_uart_register(1);
--
--      if (board.has_pccard)
--              bcm63xx_pcmcia_register();
--
--      if (board.has_enet0 &&
--          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
--              bcm63xx_enet_register(0, &board.enet0);
--
--      if (board.has_enet1 &&
--          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
--              bcm63xx_enet_register(1, &board.enet1);
--
--      if (board.has_enetsw &&
--          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
--              bcm63xx_enetsw_register(&board.enetsw);
--
--      if (board.has_usbd)
--              bcm63xx_usbd_register(&board.usbd);
--
--      if (board.has_ehci0)
--              bcm63xx_ehci_register();
--
--      if (board.has_ohci0)
--              bcm63xx_ohci_register();
--
--      /* Generate MAC address for WLAN and register our SPROM,
--       * do this after registering enet devices
--       */
--#ifdef CONFIG_SSB_PCIHOST
--      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
--              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              if (ssb_arch_register_fallback_sprom(
--                              &bcm63xx_get_fallback_sprom) < 0)
--                      pr_err("failed to register fallback SPROM\n");
--      }
--#endif
--
--      bcm63xx_spi_register();
--
--      bcm63xx_hsspi_register();
--
--      bcm63xx_flash_register();
--
--      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
--      bcm63xx_led_data.leds = board.leds;
--
--      platform_device_register(&bcm63xx_gpio_leds);
--
--      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--              gpio_request_one(board.ephy_reset_gpio,
--                              board.ephy_reset_gpio_flags, "ephy-reset");
--
--      return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -0,0 +1,214 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_gpio.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_usbd.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "board: "
-+
-+static struct board_info board;
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+      .revision               = 0x02,
-+      .board_rev              = 0x17,
-+      .country_code           = 0x0,
-+      .ant_available_bg       = 0x3,
-+      .pa0b0                  = 0x15ae,
-+      .pa0b1                  = 0xfa85,
-+      .pa0b2                  = 0xfe8d,
-+      .pa1b0                  = 0xffff,
-+      .pa1b1                  = 0xffff,
-+      .pa1b2                  = 0xffff,
-+      .gpio0                  = 0xff,
-+      .gpio1                  = 0xff,
-+      .gpio2                  = 0xff,
-+      .gpio3                  = 0xff,
-+      .maxpwr_bg              = 0x004c,
-+      .itssi_bg               = 0x00,
-+      .boardflags_lo          = 0x2848,
-+      .boardflags_hi          = 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->bustype == SSB_BUSTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }
-+}
-+#endif
-+
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+      return board.name;
-+}
-+
-+/*
-+ * setup board for device registration
-+ */
-+void __init board_early_setup(const struct board_info *target)
-+{
-+      u32 val;
-+
-+      memcpy(&board, target, sizeof(board));
-+
-+      /* setup pin multiplexing depending on board enabled device,
-+       * this has to be done this early since PCI init is done
-+       * inside arch_initcall */
-+      val = 0;
-+
-+#ifdef CONFIG_PCI
-+      if (board.has_pci) {
-+              bcm63xx_pci_enabled = 1;
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G2_PCI;
-+      }
-+#endif
-+
-+      if (board.has_pccard) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+      }
-+
-+      if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+      if (!board.name[0])
-+              panic("unable to detect bcm963xx board");
-+      printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+      /* make sure we're running on expected cpu */
-+      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+              panic("unexpected CPU for bcm963xx board");
-+}
-+
-+static struct gpio_led_platform_data bcm63xx_led_data;
-+
-+static struct platform_device bcm63xx_gpio_leds = {
-+      .name                   = "leds-gpio",
-+      .id                     = 0,
-+      .dev.platform_data      = &bcm63xx_led_data,
-+};
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+      if (board.has_uart0)
-+              bcm63xx_uart_register(0);
-+
-+      if (board.has_uart1)
-+              bcm63xx_uart_register(1);
-+
-+      if (board.has_pccard)
-+              bcm63xx_pcmcia_register();
-+
-+      if (board.has_enet0 &&
-+          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+              bcm63xx_enet_register(0, &board.enet0);
-+
-+      if (board.has_enet1 &&
-+          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+              bcm63xx_enet_register(1, &board.enet1);
-+
-+      if (board.has_enetsw &&
-+          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+              bcm63xx_enetsw_register(&board.enetsw);
-+
-+      if (board.has_usbd)
-+              bcm63xx_usbd_register(&board.usbd);
-+
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-+      /* Generate MAC address for WLAN and register our SPROM,
-+       * do this after registering enet devices
-+       */
-+#ifdef CONFIG_SSB_PCIHOST
-+      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+              if (ssb_arch_register_fallback_sprom(
-+                              &bcm63xx_get_fallback_sprom) < 0)
-+                      pr_err(PFX "failed to register fallback SPROM\n");
-+      }
-+#endif
-+
-+      bcm63xx_spi_register();
-+
-+      bcm63xx_hsspi_register();
-+
-+      bcm63xx_flash_register();
-+
-+      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-+      bcm63xx_led_data.leds = board.leds;
-+
-+      platform_device_register(&bcm63xx_gpio_leds);
-+
-+      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
-+              gpio_request_one(board.ephy_reset_gpio,
-+                              board.ephy_reset_gpio_flags, "ephy-reset");
-+
-+      return 0;
-+}
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -0,0 +1,8 @@
-+#ifndef __BOARD_COMMON_H
-+#define __BOARD_COMMON_H
-+
-+#include <board_bcm963xx.h>
-+
-+void board_early_setup(const struct board_info *board);
-+
-+#endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch b/target/linux/bcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
deleted file mode 100644 (file)
index 7f9479b..0000000
+++ /dev/null
@@ -1,100 +0,0 @@
-From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:08:06 +0100
-Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board
- setup
-
-Pass a mac address allocator to board setup code to allow board
-implementations to work with third party bootloaders not using nvram
-for configuration storage.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  3 ++-
- arch/mips/bcm63xx/boards/board_common.c   | 16 ++++++++++------
- arch/mips/bcm63xx/boards/board_common.h   |  3 ++-
- 3 files changed, 14 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -727,7 +727,8 @@ void __init board_prom_init(void)
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
-                       continue;
-               /* copy, board desc array is marked initdata */
--              board_early_setup(bcm963xx_boards[i]);
-+              board_early_setup(bcm963xx_boards[i],
-+                                bcm63xx_nvram_get_mac_address);
-               break;
-       }
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -18,7 +18,6 @@
- #include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
--#include <bcm63xx_nvram.h>
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
-@@ -81,15 +80,20 @@ const char *board_get_name(void)
-       return board.name;
- }
-+static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
-+
- /*
-  * setup board for device registration
-  */
--void __init board_early_setup(const struct board_info *target)
-+void __init board_early_setup(const struct board_info *target,
-+                            int (*get_mac_address)(u8 mac[ETH_ALEN]))
- {
-       u32 val;
-       memcpy(&board, target, sizeof(board));
-+      board_get_mac_address = get_mac_address;
-+
-       /* setup pin multiplexing depending on board enabled device,
-        * this has to be done this early since PCI init is done
-        * inside arch_initcall */
-@@ -162,15 +166,15 @@ int __init board_register_devices(void)
-               bcm63xx_pcmcia_register();
-       if (board.has_enet0 &&
--          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+          !board_get_mac_address(board.enet0.mac_addr))
-               bcm63xx_enet_register(0, &board.enet0);
-       if (board.has_enet1 &&
--          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+          !board_get_mac_address(board.enet1.mac_addr))
-               bcm63xx_enet_register(1, &board.enet1);
-       if (board.has_enetsw &&
--          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+          !board_get_mac_address(board.enetsw.mac_addr))
-               bcm63xx_enetsw_register(&board.enetsw);
-       if (board.has_usbd)
-@@ -186,7 +190,7 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
- #ifdef CONFIG_SSB_PCIHOST
--      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-               memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               if (ssb_arch_register_fallback_sprom(
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -3,6 +3,7 @@
- #include <board_bcm963xx.h>
--void board_early_setup(const struct board_info *board);
-+void board_early_setup(const struct board_info *board,
-+                     int (*get_mac_address)(u8 mac[ETH_ALEN]));
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.14/309-cfe_version_mod.patch b/target/linux/bcm63xx/patches-4.14/309-cfe_version_mod.patch
deleted file mode 100644 (file)
index fe6c6d2..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -707,10 +707,20 @@ void __init board_prom_init(void)
-       /* dump cfe version */
-       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
--      if (!memcmp(cfe, "cfe-v", 5))
--              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
--                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
--      else
-+      if (strstarts(cfe, "cfe-")) {
-+              if(cfe[4] == 'v') {
-+                      if(cfe[5] == 'd')
-+                              snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
-+                      else if (cfe[10] > 0)
-+                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
-+                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
-+                      else
-+                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
-+                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-+              } else {
-+                      snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
-+              }
-+      } else
-               strcpy(cfe_version, "unknown");
-       pr_info("CFE version: %s\n", cfe_version);
diff --git a/target/linux/bcm63xx/patches-4.14/310-cfe_simplify_detection.patch b/target/linux/bcm63xx/patches-4.14/310-cfe_simplify_detection.patch
deleted file mode 100644 (file)
index 0e4e759..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-@@ -2,6 +2,8 @@
- #ifndef BCM63XX_BOARD_H_
- #define BCM63XX_BOARD_H_
-+#include <asm/bootinfo.h>
-+
- const char *board_get_name(void);
- void board_prom_init(void);
-@@ -10,4 +12,8 @@ void board_setup(void);
- int board_register_devices(void);
-+static inline bool bcm63xx_is_cfe_present(void) {
-+      return fw_arg3 == 0x43464531;
-+}
-+
- #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch b/target/linux/bcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch
deleted file mode 100644 (file)
index bca6adb..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -35,6 +35,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/of.h>
-+ 
-+#include <asm/mach-bcm63xx/bcm63xx_board.h>
- #define BCM963XX_CFE_BLOCK_SIZE               SZ_64K  /* always at least 64KiB */
-@@ -46,30 +48,6 @@
- #define STR_NULL_TERMINATE(x) \
-       do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
--static int bcm63xx_detect_cfe(struct mtd_info *master)
--{
--      char buf[9];
--      int ret;
--      size_t retlen;
--
--      ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      if (ret)
--              return ret;
--
--      if (strncmp("cfe-v", buf, 5) == 0)
--              return 0;
--
--      /* very old CFE's do not have the cfe-v string, so check for magic */
--      ret = mtd_read(master, BCM963XX_CFE_MAGIC_OFFSET, 8, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      return strncmp("CFE1CFE1", buf, 8);
--}
--
- static int bcm63xx_read_nvram(struct mtd_info *master,
-       struct bcm963xx_nvram *nvram)
- {
-@@ -152,7 +130,7 @@ static int bcm63xx_parse_cfe_partitions(
-       struct bcm963xx_nvram *nvram = NULL;
-       int ret;
--      if (bcm63xx_detect_cfe(master))
-+      if (!bcm63xx_is_cfe_present())
-               return -EINVAL;
-       nvram = vzalloc(sizeof(*nvram));
diff --git a/target/linux/bcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch b/target/linux/bcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
deleted file mode 100644 (file)
index 7235d1f..0000000
+++ /dev/null
@@ -1,455 +0,0 @@
-From 301744ecbeece89ab3a9d6beef7802fa22598f00 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:53:12 +0100
-Subject: [PATCH 1/5] irqchip: add support for bcm6345-style periphery irq
- controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../brcm,bcm6345-periph-intc.txt                   |   50 +++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-periph.c               |  339 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-periph.h         |   16 +
- 5 files changed, 410 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-periph.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-periph.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
-@@ -0,0 +1,50 @@
-+Broadcom BCM6345 Level 1 periphery interrupt controller
-+
-+This block is a  interrupt controller that is typically connected directly
-+to one of the HW INT lines on each CPU.  Every BCM63XX xDSL chip since
-+BCM6345 has contained this hardware.
-+
-+Key elements of the hardware design include:
-+
-+- 32, 64, or 128 incoming level IRQ lines
-+
-+- All onchip peripherals are wired directly to an L2 input
-+
-+- A separate instance of the register set for each CPU, allowing individual
-+  peripheral IRQs to be routed to any CPU
-+
-+- No atomic mask/unmask operations
-+
-+- No polarity/level/edge settings
-+
-+- No FIFO or priority encoder logic; software is expected to read all
-+  1-4 status words to determine which IRQs are pending
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-periph-intc".
-+- reg: Specifies the base physical address and size of the registers.
-+  Multiple register addresses may be specified, and must match the amount of
-+  parent interrupts.
-+- interrupt-controller: Identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, should be 1.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+  Multiple lines are used to route interrupts to different cpus, with the first
-+  assumed to be for the boot CPU.
-+
-+Example:
-+
-+periph_intc: interrupt-controller@f0406800 {
-+      compatible = "brcm,bcm6345-periph-intc";
-+      reg = <0x10000020 0x10>, <0x10000030 0x10>;
-+
-+      interrupt-controller;
-+      #interrupt-cells = <1>;
-+
-+      interrupt-parent = <&cpu_intc>;
-+      interrupts = <2>, <3>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -114,6 +114,10 @@ config BRCMSTB_L2_IRQ
-       select GENERIC_IRQ_CHIP
-       select IRQ_DOMAIN
-+config BCM6345_PERIPH_IRQ
-+      bool
-+      select IRQ_DOMAIN
-+
- config DW_APB_ICTL
-       bool
-       select GENERIC_IRQ_CHIP
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP)                       += irq-mmp.o
- obj-$(CONFIG_IRQ_MXS)                 += irq-mxs.o
- obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
- obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
- obj-$(CONFIG_METAG)                   += irq-metag-ext.o
- obj-$(CONFIG_METAG_PERFCOUNTER_IRQS)  += irq-metag.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-periph.c
-@@ -0,0 +1,339 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE     IRQ_INTERNAL_BASE
-+#else
-+#define VIRQ_BASE     0
-+#endif
-+
-+#define MAX_WORDS     4
-+#define MAX_PARENT_IRQS       2
-+#define IRQS_PER_WORD 32
-+
-+struct intc_block {
-+      int parent_irq;
-+      void __iomem *base;
-+      void __iomem *en_reg[MAX_WORDS];
-+      void __iomem *status_reg[MAX_WORDS];
-+      u32 mask_cache[MAX_WORDS];
-+};
-+
-+struct intc_data {
-+      struct irq_chip chip;
-+      struct intc_block block[MAX_PARENT_IRQS];
-+
-+      int num_words;
-+
-+      struct irq_domain *domain;
-+      raw_spinlock_t lock;
-+};
-+
-+static void bcm6345_periph_irq_handle(struct irq_desc *desc)
-+{
-+      struct intc_data *data = irq_desc_get_handler_data(desc);
-+      struct irq_chip *chip = irq_desc_get_chip(desc);
-+      struct intc_block *block;
-+      unsigned int irq = irq_desc_get_irq(desc);
-+      unsigned int idx;
-+
-+      chained_irq_enter(chip, desc);
-+
-+      for (idx = 0; idx < MAX_PARENT_IRQS; idx++)
-+              if (irq == data->block[idx].parent_irq)
-+                      block = &data->block[idx];
-+
-+      for (idx = 0; idx < data->num_words; idx++) {
-+              int base = idx * IRQS_PER_WORD;
-+              unsigned long pending;
-+              int hw_irq;
-+
-+              raw_spin_lock(&data->lock);
-+              pending = __raw_readl(block->en_reg[idx]) &
-+                        __raw_readl(block->status_reg[idx]);
-+              raw_spin_unlock(&data->lock);
-+
-+              for_each_set_bit(hw_irq, &pending, IRQS_PER_WORD) {
-+                      int virq;
-+
-+                      virq  = irq_find_mapping(data->domain, base + hw_irq);
-+                      generic_handle_irq(virq);
-+              }
-+      }
-+
-+      chained_irq_exit(chip, desc);
-+}
-+
-+static void __bcm6345_periph_enable(struct intc_block *block, int reg, int bit,
-+                                  bool enable)
-+{
-+      u32 val;
-+
-+      val = __raw_readl(block->en_reg[reg]);
-+      if (enable)
-+              val |= BIT(bit);
-+      else
-+              val &= ~BIT(bit);
-+      __raw_writel(val, block->en_reg[reg]);
-+}
-+
-+static void bcm6345_periph_irq_mask(struct irq_data *data)
-+{
-+      unsigned int i, reg, bit;
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      raw_spin_lock(&priv->lock);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              __bcm6345_periph_enable(block, reg, bit, false);
-+      }
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_periph_irq_unmask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      unsigned int i, reg, bit;
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      raw_spin_lock(&priv->lock);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              if (block->mask_cache[reg] & BIT(bit))
-+                      __bcm6345_periph_enable(block, reg, bit, true);
-+              else
-+                      __bcm6345_periph_enable(block, reg, bit, false);
-+      }
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+#ifdef CONFIG_SMP
-+static int bcm6345_periph_set_affinity(struct irq_data *data,
-+                                     const struct cpumask *mask, bool force)
-+{
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      struct intc_data *priv = data->domain->host_data;
-+      unsigned int i, reg, bit;
-+      unsigned long flags;
-+      bool enabled;
-+      int cpu;
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      /* we could route to more than one cpu, but performance
-+         suffers, so fix it to one.
-+       */
-+      cpu = cpumask_any_and(mask, cpu_online_mask);
-+      if (cpu >= nr_cpu_ids)
-+              return -EINVAL;
-+
-+      if (cpu >= MAX_PARENT_IRQS)
-+              return -EINVAL;
-+
-+      if (!priv->block[cpu].parent_irq)
-+              return -EINVAL;
-+
-+      raw_spin_lock_irqsave(&priv->lock, flags);
-+      enabled = !irqd_irq_masked(data);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              if (i == cpu) {
-+                      block->mask_cache[reg] |= BIT(bit);
-+                      __bcm6345_periph_enable(block, reg, bit, enabled);
-+              } else {
-+                      block->mask_cache[reg] &= ~BIT(bit);
-+                      __bcm6345_periph_enable(block, reg, bit, false);
-+              }
-+      }
-+      raw_spin_unlock_irqrestore(&priv->lock, flags);
-+
-+      return 0;
-+}
-+#endif
-+
-+static int bcm6345_periph_map(struct irq_domain *d, unsigned int irq,
-+                            irq_hw_number_t hw)
-+{
-+      struct intc_data *priv = d->host_data;
-+
-+      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+      return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_periph_domain_ops = {
-+      .xlate = irq_domain_xlate_onecell,
-+      .map = bcm6345_periph_map,
-+};
-+
-+static int __init __bcm6345_periph_intc_init(struct device_node *node,
-+                                           int num_blocks, int *irq,
-+                                           void __iomem **base, int num_words)
-+{
-+      struct intc_data *data;
-+      unsigned int i, w, status_offset;
-+
-+      data = kzalloc(sizeof(*data), GFP_KERNEL);
-+      if (!data)
-+              return -ENOMEM;
-+
-+      raw_spin_lock_init(&data->lock);
-+
-+      status_offset = num_words * sizeof(u32);
-+
-+      for (i = 0; i < num_blocks; i++) {
-+              struct intc_block *block = &data->block[i];
-+
-+              block->parent_irq = irq[i];
-+              block->base = base[i];
-+
-+              for (w = 0; w < num_words; w++) {
-+                      int word_offset = sizeof(u32) * ((num_words - w) - 1);
-+
-+                      block->en_reg[w] = base[i] + word_offset;
-+                      block->status_reg[w] = base[i] + status_offset;
-+                      block->status_reg[w] += word_offset;
-+
-+                      /* route all interrupts to line 0 by default */
-+                      if (i == 0)
-+                              block->mask_cache[w] = 0xffffffff;
-+              }
-+
-+              irq_set_handler_data(block->parent_irq, data);
-+              irq_set_chained_handler(block->parent_irq,
-+                                      bcm6345_periph_irq_handle);
-+      }
-+
-+      data->num_words = num_words;
-+
-+      data->chip.name = "bcm6345-periph-intc";
-+      data->chip.irq_mask = bcm6345_periph_irq_mask;
-+      data->chip.irq_unmask = bcm6345_periph_irq_unmask;
-+
-+#ifdef CONFIG_SMP
-+      if (num_blocks > 1)
-+              data->chip.irq_set_affinity = bcm6345_periph_set_affinity;
-+#endif
-+
-+      data->domain = irq_domain_add_simple(node, IRQS_PER_WORD * num_words,
-+                                           VIRQ_BASE,
-+                                           &bcm6345_periph_domain_ops, data);
-+      if (!data->domain) {
-+              kfree(data);
-+              return -EINVAL;
-+      }
-+
-+      return 0;
-+}
-+
-+void __init bcm6345_periph_intc_init(int num_blocks, int *irq,
-+                                   void __iomem **base, int num_words)
-+{
-+      __bcm6345_periph_intc_init(NULL, num_blocks, irq, base, num_words);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_periph_of_init(struct device_node *node,
-+                                       struct device_node *parent)
-+{
-+      struct resource res;
-+      int num_irqs, ret = -EINVAL;
-+      int irqs[MAX_PARENT_IRQS] = { 0 };
-+      void __iomem *bases[MAX_PARENT_IRQS] = { NULL };
-+      int words = 0;
-+      int i;
-+
-+      num_irqs = of_irq_count(node);
-+
-+      if (num_irqs < 1 || num_irqs > MAX_PARENT_IRQS)
-+              return -EINVAL;
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              resource_size_t size;
-+
-+              irqs[i] = irq_of_parse_and_map(node, i);
-+              if (!irqs[i])
-+                      goto out_unmap;
-+
-+              if (of_address_to_resource(node, i, &res))
-+                      goto out_unmap;
-+
-+              size = resource_size(&res);
-+              switch (size) {
-+              case 8:
-+              case 16:
-+              case 32:
-+                      size = size / 8;
-+                      break;
-+              default:
-+                      goto out_unmap;
-+              }
-+
-+              if (words && words != size) {
-+                      ret = -EINVAL;
-+                      goto out_unmap;
-+              }
-+              words = size;
-+
-+              bases[i] = of_iomap(node, i);
-+              if (!bases[i]) {
-+                      ret = -ENOMEM;
-+                      goto out_unmap;
-+              }
-+      }
-+
-+      ret = __bcm6345_periph_intc_init(node, num_irqs, irqs, bases, words);
-+      if (!ret)
-+              return 0;
-+
-+out_unmap:
-+      for (i = 0; i < num_irqs; i++) {
-+              iounmap(bases[i]);
-+              irq_dispose_mapping(irqs[i]);
-+      }
-+
-+      return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6345_periph_intc, "brcm,bcm6345-l1-intc",
-+              bcm6345_periph_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-periph.h
-@@ -0,0 +1,16 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+
-+void bcm6345_periph_intc_init(int num_blocks, int *irq, void __iomem **base,
-+                            int num_words);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H */
diff --git a/target/linux/bcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch b/target/linux/bcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
deleted file mode 100644 (file)
index b5df035..0000000
+++ /dev/null
@@ -1,394 +0,0 @@
-From cf908990d4a8ccdb73ee4484aa8cadad379ca314 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:54:27 +0100
-Subject: [PATCH 2/5] irqchip: add support for bcm6345-style external
- interrupt controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../interrupt-controller/brcm,bcm6345-ext-intc.txt |   29 ++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-ext.c                  |  287 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-ext.h            |   14 +
- 5 files changed, 335 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-ext.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
-@@ -0,0 +1,29 @@
-+Broadcom BCM6345-style external interrupt controller
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-ext-intc" or "brcm,bcm6318-ext-intc".
-+- reg: Specifies the base physical addresses and size of the registers.
-+- interrupt-controller: identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, Should be 2.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+
-+Optional properties:
-+
-+- brcm,field-width: Size of each field (mask, clear, sense, ...) in bits in the
-+  register. Defaults to 4.
-+
-+Example:
-+
-+ext_intc: interrupt-controller@10000018 {
-+      compatible = "brcm,bcm6345-ext-intc";
-+      interrupt-parent = <&periph_intc>;
-+      #interrupt-cells = <2>;
-+      reg = <0x10000018 0x4>;
-+      interrupt-controller;
-+      interrupts = <24>, <25>, <26>, <27>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -114,6 +114,10 @@ config BRCMSTB_L2_IRQ
-       select GENERIC_IRQ_CHIP
-       select IRQ_DOMAIN
-+config BCM6345_EXT_IRQ
-+      bool
-+      select IRQ_DOMAIN
-+
- config BCM6345_PERIPH_IRQ
-       bool
-       select IRQ_DOMAIN
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP)                       += irq-mmp.o
- obj-$(CONFIG_IRQ_MXS)                 += irq-mxs.o
- obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
- obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_EXT_IRQ)         += irq-bcm6345-ext.o
- obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
- obj-$(CONFIG_METAG)                   += irq-metag-ext.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-ext.c
-@@ -0,0 +1,301 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE             IRQ_EXTERNAL_BASE
-+#else
-+#define VIRQ_BASE             0
-+#endif
-+
-+#define MAX_IRQS              4
-+
-+#define EXTIRQ_CFG_SENSE      0
-+#define EXTIRQ_CFG_STAT               1
-+#define EXTIRQ_CFG_CLEAR      2
-+#define EXTIRQ_CFG_MASK               3
-+#define EXTIRQ_CFG_BOTHEDGE   4
-+#define EXTIRQ_CFG_LEVELSENSE 5
-+
-+struct intc_data {
-+      struct irq_chip chip;
-+      struct irq_domain *domain;
-+      raw_spinlock_t lock;
-+
-+      int parent_irq[MAX_IRQS];
-+      void __iomem *reg;
-+      int shift;
-+      unsigned int toggle_clear_on_ack:1;
-+};
-+
-+static void bcm6345_ext_intc_irq_handle(struct irq_desc *desc)
-+{
-+      struct intc_data *data = irq_desc_get_handler_data(desc);
-+      struct irq_chip *chip = irq_desc_get_chip(desc);
-+      unsigned int irq = irq_desc_get_irq(desc);
-+      unsigned int idx;
-+
-+      chained_irq_enter(chip, desc);
-+
-+      for (idx = 0; idx < MAX_IRQS; idx++) {
-+              if (data->parent_irq[idx] != irq)
-+                      continue;
-+
-+              generic_handle_irq(irq_find_mapping(data->domain, idx));
-+      }
-+
-+      chained_irq_exit(chip, desc);
-+}
-+
-+static void bcm6345_ext_intc_irq_ack(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      __raw_writel(reg | (1 << (hwirq + EXTIRQ_CFG_CLEAR * priv->shift)),
-+                   priv->reg);
-+      if (priv->toggle_clear_on_ack)
-+              __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_mask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      reg &= ~(1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift));
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_unmask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      reg |= 1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift);
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static int bcm6345_ext_intc_set_type(struct irq_data *data,
-+                                   unsigned int flow_type)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      bool levelsense = 0, sense = 0, bothedge = 0;
-+      u32 reg;
-+
-+      flow_type &= IRQ_TYPE_SENSE_MASK;
-+
-+      if (flow_type == IRQ_TYPE_NONE)
-+              flow_type = IRQ_TYPE_LEVEL_LOW;
-+
-+      switch (flow_type) {
-+      case IRQ_TYPE_EDGE_BOTH:
-+              bothedge = 1;
-+              break;
-+
-+      case IRQ_TYPE_EDGE_RISING:
-+              sense = 1;
-+              break;
-+
-+      case IRQ_TYPE_EDGE_FALLING:
-+              break;
-+
-+      case IRQ_TYPE_LEVEL_HIGH:
-+              levelsense = 1;
-+              sense = 1;
-+              break;
-+
-+      case IRQ_TYPE_LEVEL_LOW:
-+              levelsense = 1;
-+              break;
-+
-+      default:
-+              pr_err("bogus flow type combination given!\n");
-+              return -EINVAL;
-+      }
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+
-+      if (levelsense)
-+              reg |= 1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift);
-+      else
-+              reg &= ~(1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift));
-+      if (sense)
-+              reg |= 1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift);
-+      else
-+              reg &= ~(1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift));
-+      if (bothedge)
-+              reg |= 1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift);
-+      else
-+              reg &= ~(1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift));
-+
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+
-+      irqd_set_trigger_type(data, flow_type);
-+      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-+              irq_set_handler_locked(data, handle_level_irq);
-+      else
-+              irq_set_handler_locked(data, handle_edge_irq);
-+
-+      return 0;
-+}
-+
-+static int bcm6345_ext_intc_map(struct irq_domain *d, unsigned int irq,
-+                              irq_hw_number_t hw)
-+{
-+      struct intc_data *priv = d->host_data;
-+
-+      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+      return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_ext_domain_ops = {
-+      .xlate = irq_domain_xlate_twocell,
-+      .map = bcm6345_ext_intc_map,
-+};
-+
-+static int __init __bcm6345_ext_intc_init(struct device_node *node,
-+                                        int num_irqs, int *irqs,
-+                                        void __iomem *reg, int shift,
-+                                        bool toggle_clear_on_ack)
-+{
-+      struct intc_data *data;
-+      unsigned int i;
-+      int start = VIRQ_BASE;
-+
-+      data = kzalloc(sizeof(*data), GFP_KERNEL);
-+      if (!data)
-+              return -ENOMEM;
-+
-+      raw_spin_lock_init(&data->lock);
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              data->parent_irq[i] = irqs[i];
-+
-+              irq_set_handler_data(irqs[i], data);
-+              irq_set_chained_handler(irqs[i], bcm6345_ext_intc_irq_handle);
-+      }
-+
-+      data->reg = reg;
-+      data->shift = shift;
-+      data->toggle_clear_on_ack = toggle_clear_on_ack;
-+
-+      data->chip.name = "bcm6345-ext-intc";
-+      data->chip.irq_ack = bcm6345_ext_intc_irq_ack;
-+      data->chip.irq_mask = bcm6345_ext_intc_irq_mask;
-+      data->chip.irq_unmask = bcm6345_ext_intc_irq_unmask;
-+      data->chip.irq_set_type = bcm6345_ext_intc_set_type;
-+
-+      /*
-+       * If we have less than 4 irqs, this is the second controller on
-+       * bcm63xx. So increase the VIRQ start to not overlap with the first
-+       * one, but only do so if we actually use a non-zero start.
-+       *
-+       * This can be removed when bcm63xx has no legacy users anymore.
-+       */
-+      if (start && num_irqs < 4)
-+              start += 4;
-+
-+      data->domain = irq_domain_add_simple(node, num_irqs, start,
-+                                           &bcm6345_ext_domain_ops, data);
-+      if (!data->domain) {
-+              kfree(data);
-+              return -ENOMEM;
-+      }
-+
-+      return 0;
-+}
-+
-+void __init bcm6345_ext_intc_init(int num_irqs, int *irqs, void __iomem *reg,
-+                                int shift)
-+{
-+      __bcm6345_ext_intc_init(NULL, num_irqs, irqs, reg, shift, false);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_ext_intc_of_init(struct device_node *node,
-+                                         struct device_node *parent)
-+{
-+      int num_irqs, ret = -EINVAL;
-+      unsigned i;
-+      void __iomem *base;
-+      int irqs[MAX_IRQS] = { 0 };
-+      u32 shift;
-+      bool toggle_clear_on_ack = false;
-+
-+      num_irqs = of_irq_count(node);
-+
-+      if (!num_irqs || num_irqs > MAX_IRQS)
-+              return -EINVAL;
-+
-+      if (of_property_read_u32(node, "brcm,field-width", &shift))
-+              shift = 4;
-+
-+      /* on BCM6318 setting CLEAR seems to continuously mask interrupts */
-+      if (of_device_is_compatible(node, "brcm,bcm6318-ext-intc"))
-+              toggle_clear_on_ack = true;
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              irqs[i] = irq_of_parse_and_map(node, i);
-+              if (!irqs[i]) {
-+                      ret = -ENOMEM;
-+                      goto out_unmap;
-+              }
-+      }
-+
-+      base = of_iomap(node, 0);
-+      if (!base)
-+              goto out_unmap;
-+
-+      ret = __bcm6345_ext_intc_init(node, num_irqs, irqs, base, shift,
-+                                    toggle_clear_on_ack);
-+      if (!ret)
-+              return 0;
-+out_unmap:
-+      iounmap(base);
-+
-+      for (i = 0; i < num_irqs; i++)
-+              irq_dispose_mapping(irqs[i]);
-+
-+      return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6318_ext_intc, "brcm,bcm6318-ext-intc",
-+              bcm6345_ext_intc_of_init);
-+IRQCHIP_DECLARE(bcm6345_ext_intc, "brcm,bcm6345-ext-intc",
-+              bcm6345_ext_intc_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-ext.h
-@@ -0,0 +1,14 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+
-+void bcm6345_ext_intc_init(int n_irqs, int *irqs, void __iomem *reg, int shift);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H */
diff --git a/target/linux/bcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch b/target/linux/bcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
deleted file mode 100644 (file)
index d04d89c..0000000
+++ /dev/null
@@ -1,695 +0,0 @@
-From d2d2489e0a4b740abd980e9d1cad952d15bc2d9e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:55:02 +0100
-Subject: [PATCH] MIPS: BCM63XX: switch to IRQ_DOMAIN
-
-Now that we have working IRQ_DOMAIN drivers for both interrupt controllers,
-switch to using them.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig       |   3 +
- arch/mips/bcm63xx/irq.c | 612 +++++++++---------------------------------------
- 2 files changed, 108 insertions(+), 507 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -272,6 +272,9 @@ config BCM63XX
-       select SYNC_R4K
-       select DMA_NONCOHERENT
-       select IRQ_MIPS_CPU
-+      select BCM6345_EXT_IRQ
-+      select BCM6345_PERIPH_IRQ
-+      select IRQ_DOMAIN
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_HAS_EARLY_PRINTK
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -11,7 +11,9 @@
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
--#include <linux/spinlock.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -19,544 +21,140 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
--
--static DEFINE_SPINLOCK(ipic_lock);
--static DEFINE_SPINLOCK(epic_lock);
--
--static u32 irq_stat_addr[2];
--static u32 irq_mask_addr[2];
--static void (*dispatch_internal)(int cpu);
--static int is_ext_irq_cascaded;
--static unsigned int ext_irq_count;
--static unsigned int ext_irq_start, ext_irq_end;
--static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
--static void (*internal_irq_mask)(struct irq_data *d);
--static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
--
--
--static inline u32 get_ext_irq_perf_reg(int irq)
--{
--      if (irq < 4)
--              return ext_irq_cfg_reg1;
--      return ext_irq_cfg_reg2;
--}
--
--static inline void handle_internal(int intbit)
--{
--      if (is_ext_irq_cascaded &&
--          intbit >= ext_irq_start && intbit <= ext_irq_end)
--              do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE);
--      else
--              do_IRQ(intbit + IRQ_INTERNAL_BASE);
--}
--
--static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
--                                   const struct cpumask *m)
--{
--      bool enable = cpu_online(cpu);
--
--#ifdef CONFIG_SMP
--      if (m)
--              enable &= cpumask_test_cpu(cpu, m);
--      else if (irqd_affinity_was_set(d))
--              enable &= cpumask_test_cpu(cpu, irq_data_get_affinity_mask(d));
--#endif
--      return enable;
--}
--
--/*
-- * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
-- * prioritize any interrupt relatively to another. the static counter
-- * will resume the loop where it ended the last time we left this
-- * function.
-- */
--
--#define BUILD_IPIC_INTERNAL(width)                                    \
--void __dispatch_internal_##width(int cpu)                             \
--{                                                                     \
--      u32 pending[width / 32];                                        \
--      unsigned int src, tgt;                                          \
--      bool irqs_pending = false;                                      \
--      static unsigned int i[2];                                       \
--      unsigned int *next = &i[cpu];                                   \
--      unsigned long flags;                                            \
--                                                                      \
--      /* read registers in reverse order */                           \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
--              u32 val;                                                \
--                                                                      \
--              val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \
--              val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \
--              pending[--tgt] = val;                                   \
--                                                                      \
--              if (val)                                                \
--                      irqs_pending = true;                            \
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--                                                                      \
--      if (!irqs_pending)                                              \
--              return;                                                 \
--                                                                      \
--      while (1) {                                                     \
--              unsigned int to_call = *next;                           \
--                                                                      \
--              *next = (*next + 1) & (width - 1);                      \
--              if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
--                      handle_internal(to_call);                       \
--                      break;                                          \
--              }                                                       \
--      }                                                               \
--}                                                                     \
--                                                                      \
--static void __internal_irq_mask_##width(struct irq_data *d)           \
--{                                                                     \
--      u32 val;                                                        \
--      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
--      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
--      unsigned bit = irq & 0x1f;                                      \
--      unsigned long flags;                                            \
--      int cpu;                                                        \
--                                                                      \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for_each_present_cpu(cpu) {                                     \
--              if (!irq_mask_addr[cpu])                                \
--                      break;                                          \
--                                                                      \
--              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--              val &= ~(1 << bit);                                     \
--              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--}                                                                     \
--                                                                      \
--static void __internal_irq_unmask_##width(struct irq_data *d,         \
--                                        const struct cpumask *m)      \
--{                                                                     \
--      u32 val;                                                        \
--      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
--      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
--      unsigned bit = irq & 0x1f;                                      \
--      unsigned long flags;                                            \
--      int cpu;                                                        \
--                                                                      \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for_each_present_cpu(cpu) {                                     \
--              if (!irq_mask_addr[cpu])                                \
--                      break;                                          \
--                                                                      \
--              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--              if (enable_irq_for_cpu(cpu, d, m))                      \
--                      val |= (1 << bit);                              \
--              else                                                    \
--                      val &= ~(1 << bit);                             \
--              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--}
--
--BUILD_IPIC_INTERNAL(32);
--BUILD_IPIC_INTERNAL(64);
--
--asmlinkage void plat_irq_dispatch(void)
--{
--      u32 cause;
--
--      do {
--              cause = read_c0_cause() & read_c0_status() & ST0_IM;
--
--              if (!cause)
--                      break;
--
--              if (cause & CAUSEF_IP7)
--                      do_IRQ(7);
--              if (cause & CAUSEF_IP0)
--                      do_IRQ(0);
--              if (cause & CAUSEF_IP1)
--                      do_IRQ(1);
--              if (cause & CAUSEF_IP2)
--                      dispatch_internal(0);
--              if (is_ext_irq_cascaded) {
--                      if (cause & CAUSEF_IP3)
--                              dispatch_internal(1);
--              } else {
--                      if (cause & CAUSEF_IP3)
--                              do_IRQ(IRQ_EXT_0);
--                      if (cause & CAUSEF_IP4)
--                              do_IRQ(IRQ_EXT_1);
--                      if (cause & CAUSEF_IP5)
--                              do_IRQ(IRQ_EXT_2);
--                      if (cause & CAUSEF_IP6)
--                              do_IRQ(IRQ_EXT_3);
--              }
--      } while (1);
--}
--
--/*
-- * internal IRQs operations: only mask/unmask on PERF irq mask
-- * register.
-- */
--static void bcm63xx_internal_irq_mask(struct irq_data *d)
--{
--      internal_irq_mask(d);
--}
--
--static void bcm63xx_internal_irq_unmask(struct irq_data *d)
--{
--      internal_irq_unmask(d, NULL);
--}
--
--/*
-- * external IRQs operations: mask/unmask and clear on PERF external
-- * irq control register.
-- */
--static void bcm63xx_external_irq_mask(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4);
--      else
--              reg &= ~EXTIRQ_CFG_MASK(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      if (is_ext_irq_cascaded)
--              internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
--}
--
--static void bcm63xx_external_irq_unmask(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg |= EXTIRQ_CFG_MASK_6348(irq % 4);
--      else
--              reg |= EXTIRQ_CFG_MASK(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      if (is_ext_irq_cascaded)
--              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
--                                  NULL);
--}
--
--static void bcm63xx_external_irq_clear(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4);
--      else
--              reg |= EXTIRQ_CFG_CLEAR(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--}
--
--static int bcm63xx_external_irq_set_type(struct irq_data *d,
--                                       unsigned int flow_type)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      int levelsense, sense, bothedge;
--      unsigned long flags;
--
--      flow_type &= IRQ_TYPE_SENSE_MASK;
--
--      if (flow_type == IRQ_TYPE_NONE)
--              flow_type = IRQ_TYPE_LEVEL_LOW;
--
--      levelsense = sense = bothedge = 0;
--      switch (flow_type) {
--      case IRQ_TYPE_EDGE_BOTH:
--              bothedge = 1;
--              break;
--
--      case IRQ_TYPE_EDGE_RISING:
--              sense = 1;
--              break;
--
--      case IRQ_TYPE_EDGE_FALLING:
--              break;
--
--      case IRQ_TYPE_LEVEL_HIGH:
--              levelsense = 1;
--              sense = 1;
--              break;
--
--      case IRQ_TYPE_LEVEL_LOW:
--              levelsense = 1;
--              break;
--
--      default:
--              pr_err("bogus flow type combination given !\n");
--              return -EINVAL;
--      }
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--      irq %= 4;
--
--      switch (bcm63xx_get_cpu_id()) {
--      case BCM6348_CPU_ID:
--              if (levelsense)
--                      reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq);
--              if (sense)
--                      reg |= EXTIRQ_CFG_SENSE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_SENSE_6348(irq);
--              if (bothedge)
--                      reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
--              break;
--
--      case BCM3368_CPU_ID:
--      case BCM6328_CPU_ID:
--      case BCM6338_CPU_ID:
--      case BCM6345_CPU_ID:
--      case BCM6358_CPU_ID:
--      case BCM6362_CPU_ID:
--      case BCM6368_CPU_ID:
--              if (levelsense)
--                      reg |= EXTIRQ_CFG_LEVELSENSE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
--              if (sense)
--                      reg |= EXTIRQ_CFG_SENSE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_SENSE(irq);
--              if (bothedge)
--                      reg |= EXTIRQ_CFG_BOTHEDGE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
--              break;
--      default:
--              BUG();
--      }
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      irqd_set_trigger_type(d, flow_type);
--      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
--              irq_set_handler_locked(d, handle_level_irq);
--      else
--              irq_set_handler_locked(d, handle_edge_irq);
--
--      return IRQ_SET_MASK_OK_NOCOPY;
--}
--
--#ifdef CONFIG_SMP
--static int bcm63xx_internal_set_affinity(struct irq_data *data,
--                                       const struct cpumask *dest,
--                                       bool force)
--{
--      if (!irqd_irq_disabled(data))
--              internal_irq_unmask(data, dest);
--
--      return 0;
--}
--#endif
--
--static struct irq_chip bcm63xx_internal_irq_chip = {
--      .name           = "bcm63xx_ipic",
--      .irq_mask       = bcm63xx_internal_irq_mask,
--      .irq_unmask     = bcm63xx_internal_irq_unmask,
--};
--
--static struct irq_chip bcm63xx_external_irq_chip = {
--      .name           = "bcm63xx_epic",
--      .irq_ack        = bcm63xx_external_irq_clear,
--
--      .irq_mask       = bcm63xx_external_irq_mask,
--      .irq_unmask     = bcm63xx_external_irq_unmask,
--
--      .irq_set_type   = bcm63xx_external_irq_set_type,
--};
--
--static struct irqaction cpu_ip2_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_ip2",
--      .flags          = IRQF_NO_THREAD,
--};
--
--#ifdef CONFIG_SMP
--static struct irqaction cpu_ip3_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_ip3",
--      .flags          = IRQF_NO_THREAD,
--};
--#endif
--
--static struct irqaction cpu_ext_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_extirq",
--      .flags          = IRQF_NO_THREAD,
--};
--
--static void bcm63xx_init_irq(void)
-+void __init arch_init_irq(void)
- {
--      int irq_bits;
--
--      irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
--      irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
-+      void __iomem *periph_bases[2];
-+      void __iomem *ext_intc_bases[2];
-+      int periph_irq_count, periph_width, ext_irq_count, ext_shift;
-+      int periph_irqs[2] = { 2, 3 };
-+      int ext_irqs[6];
-+
-+      periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      ext_intc_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM3368_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-+              periph_bases[0] += PERF_IRQMASK_3368_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_3368;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_3368_EXT_IRQ0;
-+              ext_irqs[1] = BCM_3368_EXT_IRQ1;
-+              ext_irqs[2] = BCM_3368_EXT_IRQ2;
-+              ext_irqs[3] = BCM_3368_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6328_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6328_REG(1);
--              irq_bits = 64;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-+              periph_bases[0] += PERF_IRQMASK_6328_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6328_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6328;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6328_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6328_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6328_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6328_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6338_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-+              periph_bases[0] += PERF_IRQMASK_6338_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6338;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 4;
-               break;
-       case BCM6345_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-+              periph_bases[0] += PERF_IRQMASK_6345_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6345;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 4;
-               break;
-       case BCM6348_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-+              periph_bases[0] += PERF_IRQMASK_6348_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6348;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 5;
-               break;
-       case BCM6358_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
--              irq_bits = 32;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-+              periph_bases[0] += PERF_IRQMASK_6358_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6358_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6358_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6358_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6358_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6362_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
--              irq_bits = 64;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-+              periph_bases[0] += PERF_IRQMASK_6362_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6362_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6362;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6362_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6362_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6362_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6362_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6368_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
--              irq_bits = 64;
-+              periph_bases[0] += PERF_IRQMASK_6368_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6368_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6368;
-+              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6368;
-               ext_irq_count = 6;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
--              ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
-+              ext_irqs[0] = BCM_6368_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6368_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6368_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6368_EXT_IRQ3;
-+              ext_irqs[4] = BCM_6368_EXT_IRQ4;
-+              ext_irqs[5] = BCM_6368_EXT_IRQ5;
-+              ext_shift = 4;
-               break;
-       default:
-               BUG();
-       }
--      if (irq_bits == 32) {
--              dispatch_internal = __dispatch_internal_32;
--              internal_irq_mask = __internal_irq_mask_32;
--              internal_irq_unmask = __internal_irq_unmask_32;
--      } else {
--              dispatch_internal = __dispatch_internal_64;
--              internal_irq_mask = __internal_irq_mask_64;
--              internal_irq_unmask = __internal_irq_unmask_64;
--      }
--}
--
--void __init arch_init_irq(void)
--{
--      int i;
--
--      bcm63xx_init_irq();
-       mips_cpu_irq_init();
--      for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
--              irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip,
--                                       handle_level_irq);
--
--      for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i)
--              irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip,
--                                       handle_edge_irq);
--
--      if (!is_ext_irq_cascaded) {
--              for (i = 3; i < 3 + ext_irq_count; ++i)
--                      setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
--      }
--
--      setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
--#ifdef CONFIG_SMP
--      if (is_ext_irq_cascaded) {
--              setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
--              bcm63xx_internal_irq_chip.irq_set_affinity =
--                      bcm63xx_internal_set_affinity;
--
--              cpumask_clear(irq_default_affinity);
--              cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
--      }
--#endif
-+      bcm6345_periph_intc_init(periph_irq_count, periph_irqs, periph_bases,
-+                               periph_width);
-+      bcm6345_ext_intc_init(4, ext_irqs, ext_intc_bases[0], ext_shift);
-+      if (ext_irq_count > 4)
-+              bcm6345_ext_intc_init(2, &ext_irqs[4], ext_intc_bases[1],
-+                                    ext_shift);
- }
diff --git a/target/linux/bcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch b/target/linux/bcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
deleted file mode 100644 (file)
index e911f0e..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-From 4fd286c3e5a5bebab0391cf1937695b3ed6721a3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 20:20:30 +0100
-Subject: [PATCH 4/5] MIPS: BCM63XX: wire up BCM6358's external interrupts 4
- and 5
-
-Due to the external interrupts being non consecutive, the previous
-implementation did not support them. Now that we treat both registers
-as separate irq controllers, there is no such limitation anymore and
-we can expose them for drivers to use.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c                           |    5 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |    2 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    1 +
- 3 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -108,11 +108,14 @@ void __init arch_init_irq(void)
-               periph_width = 1;
-               ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
--              ext_irq_count = 4;
-+              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6358;
-+              ext_irq_count = 6;
-               ext_irqs[0] = BCM_6358_EXT_IRQ0;
-               ext_irqs[1] = BCM_6358_EXT_IRQ1;
-               ext_irqs[2] = BCM_6358_EXT_IRQ2;
-               ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+              ext_irqs[4] = BCM_6358_EXT_IRQ4;
-+              ext_irqs[5] = BCM_6358_EXT_IRQ5;
-               ext_shift = 4;
-               break;
-       case BCM6362_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -896,6 +896,8 @@ enum bcm63xx_irq {
- #define BCM_6358_EXT_IRQ1             (IRQ_INTERNAL_BASE + 26)
- #define BCM_6358_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
- #define BCM_6358_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6358_EXT_IRQ4             (IRQ_INTERNAL_BASE + 20)
-+#define BCM_6358_EXT_IRQ5             (IRQ_INTERNAL_BASE + 21)
- /*
-  * 6362 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -244,6 +244,7 @@
- #define PERF_EXTIRQ_CFG_REG_6362      0x18
- #define PERF_EXTIRQ_CFG_REG_6368      0x18
-+#define PERF_EXTIRQ_CFG_REG2_6358     0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
- /* for 6348 only */
diff --git a/target/linux/bcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/bcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
deleted file mode 100644 (file)
index 07d3f9d..0000000
+++ /dev/null
@@ -1,77 +0,0 @@
-From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:08:36 +0100
-Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
-
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
- u16 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
-+static u32 bcm63xx_cpu_variant __read_mostly;
-+
- static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
- };
-+u32 bcm63xx_get_cpu_variant(void)
-+{
-+      return bcm63xx_cpu_variant;
-+}
-+
-+EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
-+
- u8 bcm63xx_get_cpu_rev(void)
- {
-       return bcm63xx_cpu_rev;
-@@ -333,6 +342,7 @@ void __init bcm63xx_cpu_init(void)
-       /* read out CPU type */
-       tmp = bcm_readl(chipid_reg);
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-       switch (bcm63xx_cpu_id) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -20,6 +20,7 @@
- #define BCM6368_CPU_ID                0x6368
- void __init bcm63xx_cpu_init(void);
-+u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
-@@ -83,6 +84,23 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_3368() \
-+      (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6328() \
-+      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6338() \
-+      (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6345() \
-+      (bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6348() \
-+      (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6358() \
-+      (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6362() \
-+      (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6368() \
-+      (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-  * address of these sets do change.
diff --git a/target/linux/bcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/bcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch
deleted file mode 100644 (file)
index 57af836..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From 3bd8e2535265f06f79ed9c0ad788405441e091dc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:22:41 +0100
-Subject: [PATCH 21/45] MIPS: BCM63XX: define variant id field
-
-Some SoC have a variant id field in the chip id register.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -10,6 +10,8 @@
- #define PERF_REV_REG                  0x0
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
-+#define REV_VARID_SHIFT                       12
-+#define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT                       0
- #define REV_REVID_MASK                        (0xff << REV_REVID_SHIFT)
diff --git a/target/linux/bcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch b/target/linux/bcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
deleted file mode 100644 (file)
index a05a4b3..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From d59120f23279ef62a48d9f94847254b061d0a8b6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:30:59 +0100
-Subject: [PATCH 22/45] MIPS: BCM63XX: detect BCM6328 variants
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
- 2 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -305,6 +305,7 @@ void __init bcm63xx_cpu_init(void)
-       unsigned int tmp;
-       unsigned int cpu = smp_processor_id();
-       u32 chipid_reg;
-+      u8 __maybe_unused varid = 0;
-       /* soc registers location depends on cpu type */
-       chipid_reg = 0;
-@@ -344,6 +345,7 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-       bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-+      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-       switch (bcm63xx_cpu_id) {
-       case BCM3368_CPU_ID:
-@@ -353,6 +355,14 @@ void __init bcm63xx_cpu_init(void)
-       case BCM6328_CPU_ID:
-               bcm63xx_regs_base = bcm6328_regs_base;
-               bcm63xx_irqs = bcm6328_irqs;
-+
-+              if (varid == 1)
-+                      bcm63xx_cpu_variant = BCM63281_CPU_ID;
-+              else if (varid == 3)
-+                      bcm63xx_cpu_variant = BCM63283_CPU_ID;
-+              else
-+                      pr_warn("unknown BCM6328 variant: %x\n", varid);
-+
-               break;
-       case BCM6338_CPU_ID:
-               bcm63xx_regs_base = bcm6338_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -12,6 +12,8 @@
-  */
- #define BCM3368_CPU_ID                0x3368
- #define BCM6328_CPU_ID                0x6328
-+#define BCM63281_CPU_ID               0x63281
-+#define BCM63283_CPU_ID               0x63283
- #define BCM6338_CPU_ID                0x6338
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
-@@ -86,8 +88,10 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
--#define BCMCPU_VARIANT_IS_6328() \
--      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63281() \
-+      (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63283() \
-+      (bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
- #define BCMCPU_VARIANT_IS_6338() \
-       (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
- #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/bcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/bcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
deleted file mode 100644 (file)
index 2efbf36..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-From 04458c3db8eb79da21ecde40ab36a1dde52bef06 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:33:28 +0100
-Subject: [PATCH 23/45] MIPS: BCM63XX: detect BCM6362 variants
-
----
- arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 11 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -383,6 +383,14 @@ void __init bcm63xx_cpu_init(void)
-       case BCM6362_CPU_ID:
-               bcm63xx_regs_base = bcm6362_regs_base;
-               bcm63xx_irqs = bcm6362_irqs;
-+
-+              if (varid == 1)
-+                      bcm63xx_cpu_variant = BCM6362_CPU_ID;
-+              else if (varid == 2)
-+                      bcm63xx_cpu_variant = BCM6361_CPU_ID;
-+              else
-+                      pr_warn("unknown BCM6362 variant: %x\n", varid);
-+
-               break;
-       case BCM6368_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -18,6 +18,7 @@
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
- #define BCM6358_CPU_ID                0x6358
-+#define BCM6361_CPU_ID                0x6361
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
-@@ -100,6 +101,8 @@ static inline u16 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
- #define BCMCPU_VARIANT_IS_6358() \
-       (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6361() \
-+      (bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
- #define BCMCPU_VARIANT_IS_6362() \
-       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/bcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch b/target/linux/bcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
deleted file mode 100644 (file)
index 64bcd8f..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-From 825cc67e56b5e624a05f6850a86d91508b786848 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:36:56 +0100
-Subject: [PATCH 24/44] MIPS: BCM63XX: detect BCM6368 variants
-
-The DSL-less BCM6368 variant BCM6367 uses a different chip id. Apart
-from missing DSL, there is no difference to BCM6368, so treat it such.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -393,8 +393,12 @@ void __init bcm63xx_cpu_init(void)
-               break;
-       case BCM6368_CPU_ID:
-+      case BCM6369_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
-               bcm63xx_irqs = bcm6368_irqs;
-+
-+              /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-+              bcm63xx_cpu_id = BCM6368_CPU_ID;
-               break;
-       default:
-               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -21,6 +21,7 @@
- #define BCM6361_CPU_ID                0x6361
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
-+#define BCM6369_CPU_ID                0x6369
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -107,6 +108,8 @@ static inline u16 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
-       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6369() \
-+      (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/bcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/bcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
deleted file mode 100644 (file)
index 54900d7..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:05:54 +0100
-Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -42,7 +42,7 @@
-                                       BCM_CB_MEM_SIZE - 1)
- #define BCM_PCIE_MEM_BASE_PA          0x10f00000
--#define BCM_PCIE_MEM_SIZE             (16 * 1024 * 1024)
-+#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
-                                       BCM_PCIE_MEM_SIZE - 1)
diff --git a/target/linux/bcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/bcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
deleted file mode 100644 (file)
index 05142a8..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:13:06 +0100
-Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
-
-Different SoCs use different memory windows (and sizes), so don't
-hardcode it.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
- arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
- 2 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,10 +41,10 @@
- #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
-                                       BCM_CB_MEM_SIZE - 1)
--#define BCM_PCIE_MEM_BASE_PA          0x10f00000
--#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
--#define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
--                                      BCM_PCIE_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
-+#define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
-+                                      BCM_PCIE_MEM_SIZE_6328 - 1)
- /*
-  * Internal registers are accessed through KSEG3
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
- static struct resource bcm_pcie_mem_resource = {
-       .name   = "bcm63xx PCIe memory space",
--      .start  = BCM_PCIE_MEM_BASE_PA,
--      .end    = BCM_PCIE_MEM_END_PA,
-+      .start  = 0,
-+      .end    = 0,
-       .flags  = IORESOURCE_MEM,
- };
-@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
-       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
-       /* set bar0 to little endian */
--      val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
--      val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
-+      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-       val |= BASEMASK_REMAP_EN;
-       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--      val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
-+      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-       register_pci_controller(&bcm63xx_pcie_controller);
-@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
-       if (!bcm63xx_pci_enabled)
-               return -ENODEV;
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+      }
-+
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/bcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch
deleted file mode 100644 (file)
index c38b431..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:54:51 +0100
-Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
-
----
- arch/mips/bcm63xx/cpu.c                          | 2 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
- const int *bcm63xx_irqs;
- EXPORT_SYMBOL(bcm63xx_irqs);
--u16 bcm63xx_cpu_id __read_mostly;
-+u32 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
- static u32 bcm63xx_cpu_variant __read_mostly;
-@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
- static unsigned int detect_cpu_clock(void)
- {
--      u16 cpu_id = bcm63xx_get_cpu_id();
-+      u32 cpu_id = bcm63xx_get_cpu_id();
-       switch (cpu_id) {
-       case BCM3368_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -28,7 +28,7 @@ u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
--static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
-+static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
- {
-       switch (cpu_id) {
- #ifdef CONFIG_BCM63XX_CPU_3368
-@@ -70,11 +70,11 @@ static inline u16 __pure __bcm63xx_get_c
-       return cpu_id;
- }
--extern u16 bcm63xx_cpu_id;
-+extern u32 bcm63xx_cpu_id;
--static inline u16 __pure bcm63xx_get_cpu_id(void)
-+static inline u32 __pure bcm63xx_get_cpu_id(void)
- {
--      const u16 cpu_id = bcm63xx_cpu_id;
-+      const u32 cpu_id = bcm63xx_cpu_id;
-       return __bcm63xx_get_cpu_id(cpu_id);
- }
diff --git a/target/linux/bcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/bcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
deleted file mode 100644 (file)
index 1809a3c..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:46:26 +0100
-Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
-
-Newer SoCs have 128 bit wide irq registers, thus 128 available internal
-interupts.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
- arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-@@ -2,10 +2,12 @@
- #ifndef BCM63XX_IRQ_H_
- #define BCM63XX_IRQ_H_
-+#include <irq.h>
- #include <bcm63xx_cpu.h>
- #define IRQ_INTERNAL_BASE             8
--#define IRQ_EXTERNAL_BASE             100
-+#define NR_INTERNAL_IRQS              128
-+#define IRQ_EXTERNAL_BASE             (IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
- #define IRQ_EXT_0                     (IRQ_EXTERNAL_BASE + 0)
- #define IRQ_EXT_1                     (IRQ_EXTERNAL_BASE + 1)
- #define IRQ_EXT_2                     (IRQ_EXTERNAL_BASE + 2)
---- a/arch/mips/include/asm/mach-bcm63xx/irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
-@@ -2,7 +2,7 @@
- #ifndef __ASM_MACH_BCM63XX_IRQ_H
- #define __ASM_MACH_BCM63XX_IRQ_H
--#define NR_IRQS 128
-+#define NR_IRQS 256
- #define MIPS_CPU_IRQ_BASE 0
- #endif
diff --git a/target/linux/bcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
deleted file mode 100644 (file)
index 65ca976..0000000
+++ /dev/null
@@ -1,737 +0,0 @@
-From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 17:14:17 +0100
-Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
- arch/mips/bcm63xx/dev-flash.c                     |   6 +
- arch/mips/bcm63xx/dev-spi.c                       |   4 +-
- arch/mips/bcm63xx/irq.c                           |  20 +++-
- arch/mips/bcm63xx/reset.c                         |  21 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 12 files changed, 342 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -61,6 +61,11 @@ config BCM63XX_CPU_6368
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+
-+config BCM63XX_CPU_63268
-+      bool "support 63268 CPU"
-+      select SYS_HAS_CPU_BMIPS4350
-+      select HW_HAS_PCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -697,7 +697,7 @@ void __init board_prom_init(void)
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-               val = 0x18000000;
-       } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -169,6 +169,8 @@ static void enetsw_set(struct clk *clk,
-                       clk_disable_unlocked(&clk_swpkt_sar);
-               }
-               bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable);
-+      } else if (BCMCPU_IS_63268()) {
-+              bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
-       } else {
-               return;
-       }
-@@ -214,6 +216,8 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-       else
-               return;
-@@ -236,6 +240,8 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
-       else
-               return;
-@@ -262,9 +268,13 @@ static void spi_set(struct clk *clk, int
-               mask = CKCTL_6358_SPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_SPI_EN;
--      else
--              /* BCMCPU_IS_6368 */
-+      else if (BCMCPU_IS_6368())
-               mask = CKCTL_6368_SPI_EN;
-+      else if (BCMCPU_IS_63268())
-+              mask = CKCTL_63268_SPI_EN;
-+      else
-+              return;
-+
-       bcm_hwclock_set(mask, enable);
- }
-@@ -283,6 +293,8 @@ static void hsspi_set(struct clk *clk, i
-               mask = CKCTL_6328_HSSPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_HSSPI_EN;
-+      else if (BCMCPU_IS_63268())
-+              mask = CKCTL_63268_HSSPI_EN;
-       else
-               return;
-@@ -352,6 +364,8 @@ static void pcie_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
-       else if (BCMCPU_IS_6362())
-               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
- }
- static struct clk clk_pcie = {
-@@ -536,6 +550,21 @@ static struct clk_lookup bcm6368_clks[]
-       CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
- };
-+static struct clk_lookup bcm63268_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+};
-+
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
-@@ -568,6 +597,10 @@ static int __init bcm63xx_clk_init(void)
-       case BCM6368_CPU_ID:
-               clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
-               break;
-+      case BCM63268_CPU_ID:
-+              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362;
-+              clkdev_add_table(bcm63268_clks, ARRAY_SIZE(bcm63268_clks));
-+              break;
-       }
-       return 0;
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
- };
-+static const unsigned long bcm63268_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(63268)
-+};
-+
-+static const int bcm63268_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(63268)
-+
-+};
-+
- u32 bcm63xx_get_cpu_variant(void)
- {
-       return bcm63xx_cpu_variant;
-@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
-               return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
-       }
-+      case BCM63268_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
-+                              STRAPBUS_63268_FCVO_SHIFT;
-+              switch (mips_pll_fcvo) {
-+              case 0x3:
-+              case 0xe:
-+                      return 320000000;
-+              case 0xa:
-+                      return 333000000;
-+              case 0x2:
-+              case 0xb:
-+              case 0xf:
-+                      return 400000000;
-+              default:
-+                      return 0;
-+              }
-+      }
-       default:
-               panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
-@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-       if (BCMCPU_IS_6345()) {
-@@ -305,6 +335,7 @@ void __init bcm63xx_cpu_init(void)
-       unsigned int tmp;
-       unsigned int cpu = smp_processor_id();
-       u32 chipid_reg;
-+      bool long_chipid = false;
-       u8 __maybe_unused varid = 0;
-       /* soc registers location depends on cpu type */
-@@ -326,6 +357,9 @@ void __init bcm63xx_cpu_init(void)
-               case 0x10:
-                       chipid_reg = BCM_6345_PERF_BASE;
-                       break;
-+              case 0x80:
-+                      long_chipid = true;
-+                      /* fall-through */
-               default:
-                       chipid_reg = BCM_6368_PERF_BASE;
-                       break;
-@@ -333,6 +367,7 @@ void __init bcm63xx_cpu_init(void)
-               break;
-       }
-+
-       /*
-        * really early to panic, but delaying panic would not help since we
-        * will never get any working console
-@@ -342,10 +377,17 @@ void __init bcm63xx_cpu_init(void)
-       /* read out CPU type */
-       tmp = bcm_readl(chipid_reg);
--      bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
--      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-+
-+      if (long_chipid) {
-+              bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
-+              bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
-+      } else {
-+              bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+              varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+      }
-+
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
--      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       switch (bcm63xx_cpu_id) {
-       case BCM3368_CPU_ID:
-@@ -400,6 +442,15 @@ void __init bcm63xx_cpu_init(void)
-               /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-               bcm63xx_cpu_id = BCM6368_CPU_ID;
-               break;
-+      case BCM63168_CPU_ID:
-+      case BCM63169_CPU_ID:
-+      case BCM63268_CPU_ID:
-+      case BCM63269_CPU_ID:
-+              bcm63xx_regs_base = bcm63268_regs_base;
-+              bcm63xx_irqs = bcm63268_irqs;
-+
-+              bcm63xx_cpu_id = BCM63268_CPU_ID;
-+              break;
-       default:
-               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
-               break;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t
-               case STRAPBUS_6368_BOOT_SEL_PARALLEL:
-                       return BCM63XX_FLASH_TYPE_PARALLEL;
-               }
-+      case BCM63268_CPU_ID:
-+              val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-+                      return BCM63XX_FLASH_TYPE_SERIAL;
-+              else
-+                      return BCM63XX_FLASH_TYPE_NAND;
-       default:
-               return -EINVAL;
-       }
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -51,7 +51,7 @@ int __init bcm63xx_spi_register(void)
-       }
-       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--              BCMCPU_IS_6368()) {
-+              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
-               bcm63xx_spi_device.name = "bcm6358-spi",
-               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
-       }
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -149,6 +149,20 @@ void __init arch_init_irq(void)
-               ext_irqs[5] = BCM_6368_EXT_IRQ5;
-               ext_shift = 4;
-               break;
-+      case BCM63268_CPU_ID:
-+              periph_bases[0] += PERF_IRQMASK_63268_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_63268_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 4;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_63268;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_63268_EXT_IRQ0;
-+              ext_irqs[1] = BCM_63268_EXT_IRQ1;
-+              ext_irqs[2] = BCM_63268_EXT_IRQ2;
-+              ext_irqs[3] = BCM_63268_EXT_IRQ3;
-+              ext_shift = 4;
-+              break;
-       default:
-               BUG();
-       }
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -126,6 +126,20 @@
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
-+#define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
-+#define BCM63268_RESET_ENET   0
-+#define BCM63268_RESET_USBH   SOFTRESET_63268_USBH_MASK
-+#define BCM63268_RESET_USBD   SOFTRESET_63268_USBS_MASK
-+#define BCM63268_RESET_DSL    0
-+#define BCM63268_RESET_SAR    SOFTRESET_63268_SAR_MASK
-+#define BCM63268_RESET_EPHY   0
-+#define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
-+#define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
-+#define BCM63268_RESET_MPI    0
-+#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
-+                               SOFTRESET_63268_PCIE_CORE_MASK)
-+#define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
-+
- /*
-  * core reset bits
-  */
-@@ -157,6 +171,10 @@ static const u32 bcm6368_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(6368)
- };
-+static const u32 bcm63268_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(63268)
-+};
-+
- const u32 *bcm63xx_reset_bits;
- static int reset_reg;
-@@ -183,6 +201,9 @@ static int __init bcm63xx_reset_bits_ini
-       } else if (BCMCPU_IS_6368()) {
-               reset_reg = PERF_SOFTRESET_6368_REG;
-               bcm63xx_reset_bits = bcm6368_reset_bits;
-+      } else if (BCMCPU_IS_63268()) {
-+              reset_reg = PERF_SOFTRESET_63268_REG;
-+              bcm63xx_reset_bits = bcm63268_reset_bits;
-       }
-       return 0;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -22,6 +22,10 @@
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
- #define BCM6369_CPU_ID                0x6369
-+#define BCM63168_CPU_ID               0x63168
-+#define BCM63169_CPU_ID               0x63169
-+#define BCM63268_CPU_ID               0x63268
-+#define BCM63269_CPU_ID               0x63269
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -62,6 +66,10 @@ static inline u32 __pure __bcm63xx_get_c
- #ifdef CONFIG_BCM63XX_CPU_6368
-               case BCM6368_CPU_ID:
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+              case BCM63268_CPU_ID:
-+#endif
-               break;
-       default:
-               unreachable();
-@@ -87,6 +95,7 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6358()      (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
- #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_IS_63268()     (bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-@@ -110,6 +119,14 @@ static inline u32 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
- #define BCMCPU_VARIANT_IS_6369() \
-       (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63168() \
-+      (bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63169() \
-+      (bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63268() \
-+      (bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63269() \
-+      (bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-@@ -574,6 +591,52 @@ enum bcm63xx_regs_set {
- #define BCM_6368_RNG_BASE             (0xb0004180)
- #define BCM_6368_MISC_BASE            (0xdeadbeef)
-+/*
-+ * 63268 register sets base address
-+ */
-+#define BCM_63268_DSL_LMEM_BASE               (0xdeadbeef)
-+#define BCM_63268_PERF_BASE           (0xb0000000)
-+#define BCM_63268_TIMER_BASE          (0xb0000080)
-+#define BCM_63268_WDT_BASE            (0xb000009c)
-+#define BCM_63268_UART0_BASE          (0xb0000180)
-+#define BCM_63268_UART1_BASE          (0xb00001a0)
-+#define BCM_63268_GPIO_BASE           (0xb00000c0)
-+#define BCM_63268_SPI_BASE            (0xb0000800)
-+#define BCM_63268_HSSPI_BASE          (0xb0001000)
-+#define BCM_63268_UDC0_BASE           (0xdeadbeef)
-+#define BCM_63268_USBDMA_BASE         (0xb000c800)
-+#define BCM_63268_OHCI0_BASE          (0xb0002600)
-+#define BCM_63268_OHCI_PRIV_BASE      (0xdeadbeef)
-+#define BCM_63268_USBH_PRIV_BASE      (0xb0002700)
-+#define BCM_63268_USBD_BASE           (0xb0002400)
-+#define BCM_63268_MPI_BASE            (0xdeadbeef)
-+#define BCM_63268_PCMCIA_BASE         (0xdeadbeef)
-+#define BCM_63268_PCIE_BASE           (0xb06e0000)
-+#define BCM_63268_SDRAM_REGS_BASE     (0xdeadbeef)
-+#define BCM_63268_DSL_BASE            (0xdeadbeef)
-+#define BCM_63268_UBUS_BASE           (0xdeadbeef)
-+#define BCM_63268_ENET0_BASE          (0xdeadbeef)
-+#define BCM_63268_ENET1_BASE          (0xdeadbeef)
-+#define BCM_63268_ENETDMA_BASE                (0xb000d800)
-+#define BCM_63268_ENETDMAC_BASE               (0xb000da00)
-+#define BCM_63268_ENETDMAS_BASE               (0xb000dc00)
-+#define BCM_63268_ENETSW_BASE         (0xb0700000)
-+#define BCM_63268_EHCI0_BASE          (0xb0002500)
-+#define BCM_63268_SDRAM_BASE          (0xdeadbeef)
-+#define BCM_63268_MEMC_BASE           (0xdeadbeef)
-+#define BCM_63268_DDR_BASE            (0xb0003000)
-+#define BCM_63268_M2M_BASE            (0xdeadbeef)
-+#define BCM_63268_ATM_BASE            (0xdeadbeef)
-+#define BCM_63268_XTM_BASE            (0xb0007000)
-+#define BCM_63268_XTMDMA_BASE         (0xb000b800)
-+#define BCM_63268_XTMDMAC_BASE                (0xdeadbeef)
-+#define BCM_63268_XTMDMAS_BASE                (0xdeadbeef)
-+#define BCM_63268_PCM_BASE            (0xb000b000)
-+#define BCM_63268_PCMDMA_BASE         (0xb000b800)
-+#define BCM_63268_PCMDMAC_BASE                (0xdeadbeef)
-+#define BCM_63268_PCMDMAS_BASE                (0xdeadbeef)
-+#define BCM_63268_RNG_BASE            (0xdeadbeef)
-+#define BCM_63268_MISC_BASE           (0xb0001800)
- extern const unsigned long *bcm63xx_regs_base;
-@@ -1042,6 +1105,73 @@ enum bcm63xx_irq {
- #define BCM_6368_EXT_IRQ4             (IRQ_INTERNAL_BASE + 24)
- #define BCM_6368_EXT_IRQ5             (IRQ_INTERNAL_BASE + 25)
-+/*
-+ * 63268 irqs
-+ */
-+#define BCM_63268_HIGH_IRQ_BASE               (IRQ_INTERNAL_BASE + 32)
-+#define BCM_63268_VERY_HIGH_IRQ_BASE  (BCM_63268_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_63268_TIMER_IRQ           (IRQ_INTERNAL_BASE + 0)
-+#define BCM_63268_SPI_IRQ             (BCM_63268_VERY_HIGH_IRQ_BASE + 16)
-+#define BCM_63268_UART0_IRQ           (IRQ_INTERNAL_BASE + 5)
-+#define BCM_63268_UART1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_DSL_IRQ             (IRQ_INTERNAL_BASE + 23)
-+#define BCM_63268_UDC0_IRQ            0
-+#define BCM_63268_ENET0_IRQ           0
-+#define BCM_63268_ENET1_IRQ           0
-+#define BCM_63268_ENET_PHY_IRQ                (IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_HSSPI_IRQ           (IRQ_INTERNAL_BASE + 6)
-+#define BCM_63268_OHCI0_IRQ           (IRQ_INTERNAL_BASE + 9)
-+#define BCM_63268_EHCI0_IRQ           (IRQ_INTERNAL_BASE + 10)
-+#define BCM_63268_USBD_IRQ            (IRQ_INTERNAL_BASE + 11)
-+#define BCM_63268_USBD_RXDMA0_IRQ     (IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_USBD_TXDMA0_IRQ     (BCM_63268_HIGH_IRQ_BASE + 4)
-+#define BCM_63268_USBD_RXDMA1_IRQ     (IRQ_INTERNAL_BASE + 20)
-+#define BCM_63268_USBD_TXDMA1_IRQ     (BCM_63268_HIGH_IRQ_BASE + 5)
-+#define BCM_63268_USBD_RXDMA2_IRQ     (IRQ_INTERNAL_BASE + 21)
-+#define BCM_63268_USBD_TXDMA2_IRQ     (BCM_63268_HIGH_IRQ_BASE + 6)
-+#define BCM_63268_PCMCIA_IRQ          0
-+#define BCM_63268_ENET0_RXDMA_IRQ     0
-+#define BCM_63268_ENET0_TXDMA_IRQ     0
-+#define BCM_63268_ENET1_RXDMA_IRQ     0
-+#define BCM_63268_ENET1_TXDMA_IRQ     0
-+#define BCM_63268_PCI_IRQ             (BCM_63268_HIGH_IRQ_BASE + 8)
-+#define BCM_63268_ATM_IRQ             0
-+#define BCM_63268_ENETSW_RXDMA0_IRQ   (IRQ_INTERNAL_BASE + 1)
-+#define BCM_63268_ENETSW_RXDMA1_IRQ   (IRQ_INTERNAL_BASE + 2)
-+#define BCM_63268_ENETSW_RXDMA2_IRQ   (IRQ_INTERNAL_BASE + 3)
-+#define BCM_63268_ENETSW_RXDMA3_IRQ   (IRQ_INTERNAL_BASE + 4)
-+#define BCM_63268_ENETSW_TXDMA0_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_ENETSW_TXDMA1_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_ENETSW_TXDMA2_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_ENETSW_TXDMA3_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_XTM_IRQ             (BCM_63268_HIGH_IRQ_BASE + 17)
-+#define BCM_63268_XTM_DMA0_IRQ                (IRQ_INTERNAL_BASE + 26)
-+
-+#define BCM_63268_RING_OSC_IRQ                (BCM_63268_HIGH_IRQ_BASE + 20)
-+#define BCM_63268_WLAN_GPIO_IRQ               (BCM_63268_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_WLAN_IRQ            (IRQ_INTERNAL_BASE + 7)
-+#define BCM_63268_IPSEC_IRQ           (IRQ_INTERNAL_BASE + 8)
-+#define BCM_63268_NAND_IRQ            (BCM_63268_HIGH_IRQ_BASE + 18)
-+#define BCM_63268_PCM_IRQ             (IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_DG_IRQ              (IRQ_INTERNAL_BASE + 15)
-+#define BCM_63268_EPHY_ENERGY0_IRQ    (IRQ_INTERNAL_BASE + 16)
-+#define BCM_63268_EPHY_ENERGY1_IRQ    (IRQ_INTERNAL_BASE + 17)
-+#define BCM_63268_EPHY_ENERGY2_IRQ    (IRQ_INTERNAL_BASE + 18)
-+#define BCM_63268_EPHY_ENERGY3_IRQ    (IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_IPSEC_DMA0_IRQ      (IRQ_INTERNAL_BASE + 22)
-+#define BCM_63268_IPSEC_DMA1_IRQ      (BCM_63268_HIGH_IRQ_BASE + 7)
-+#define BCM_63268_FAP0_IRQ            (IRQ_INTERNAL_BASE + 24)
-+#define BCM_63268_FAP1_IRQ            (IRQ_INTERNAL_BASE + 25)
-+#define BCM_63268_PCM_DMA0_IRQ                (BCM_63268_HIGH_IRQ_BASE + 10)
-+#define BCM_63268_PCM_DMA1_IRQ                (BCM_63268_HIGH_IRQ_BASE + 11)
-+#define BCM_63268_DECT0_IRQ           (BCM_63268_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_DECT1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_EXT_IRQ0            (BCM_63268_HIGH_IRQ_BASE + 12)
-+#define BCM_63268_EXT_IRQ1            (BCM_63268_HIGH_IRQ_BASE + 13)
-+#define BCM_63268_EXT_IRQ2            (BCM_63268_HIGH_IRQ_BASE + 14)
-+#define BCM_63268_EXT_IRQ3            (BCM_63268_HIGH_IRQ_BASE + 15)
-+
- extern const int *bcm63xx_irqs;
- #define __GEN_CPU_IRQ_TABLE(__cpu)                                    \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -23,6 +23,8 @@ static inline unsigned long bcm63xx_gpio
-               return 48;
-       case BCM6368_CPU_ID:
-               return 38;
-+      case BCM63268_CPU_ID:
-+              return 52;
-       case BCM6348_CPU_ID:
-       default:
-               return 37;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -10,6 +10,8 @@
- #define PERF_REV_REG                  0x0
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
-+#define REV_LONG_CHIPID_SHIFT         12
-+#define REV_LONG_CHIPID_MASK          (0xfffff << REV_LONG_CHIPID_SHIFT)
- #define REV_VARID_SHIFT                       12
- #define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT                       0
-@@ -212,6 +214,52 @@
-                                       CKCTL_6368_NAND_EN |            \
-                                       CKCTL_6368_IPSEC_EN)
-+#define CKCTL_63268_DISABLE_GLESS     (1 << 0)
-+#define CKCTL_63268_VDSL_QPROC_EN     (1 << 1)
-+#define CKCTL_63268_VDSL_AFE_EN               (1 << 2)
-+#define CKCTL_63268_VDSL_EN           (1 << 3)
-+#define CKCTL_63268_MIPS_EN           (1 << 4)
-+#define CKCTL_63268_WLAN_OCP_EN               (1 << 5)
-+#define CKCTL_63268_DECT_EN           (1 << 6)
-+#define CKCTL_63268_FAP0_EN           (1 << 7)
-+#define CKCTL_63268_FAP1_EN           (1 << 8)
-+#define CKCTL_63268_SAR_EN            (1 << 9)
-+#define CKCTL_63268_ROBOSW_EN         (1 << 10)
-+#define CKCTL_63268_PCM_EN            (1 << 11)
-+#define CKCTL_63268_USBD_EN           (1 << 12)
-+#define CKCTL_63268_USBH_EN           (1 << 13)
-+#define CKCTL_63268_IPSEC_EN          (1 << 14)
-+#define CKCTL_63268_SPI_EN            (1 << 15)
-+#define CKCTL_63268_HSSPI_EN          (1 << 16)
-+#define CKCTL_63268_PCIE_EN           (1 << 17)
-+#define CKCTL_63268_PHYMIPS_EN                (1 << 18)
-+#define CKCTL_63268_GMAC_EN           (1 << 19)
-+#define CKCTL_63268_NAND_EN           (1 << 20)
-+#define CKCTL_63268_TBUS_EN           (1 << 27)
-+#define CKCTL_63268_ROBOSW250_EN      (1 << 31)
-+
-+#define CKCTL_63268_ALL_SAFE_EN               (CKCTL_63268_VDSL_QPROC_EN |    \
-+                                      CKCTL_63268_VDSL_AFE_EN |       \
-+                                      CKCTL_63268_VDSL_EN |           \
-+                                      CKCTL_63268_WLAN_OCP_EN |       \
-+                                      CKCTL_63268_DECT_EN |           \
-+                                      CKCTL_63268_FAP0_EN |           \
-+                                      CKCTL_63268_FAP1_EN |           \
-+                                      CKCTL_63268_SAR_EN |            \
-+                                      CKCTL_63268_ROBOSW_EN |         \
-+                                      CKCTL_63268_PCM_EN |            \
-+                                      CKCTL_63268_USBD_EN |           \
-+                                      CKCTL_63268_USBH_EN |           \
-+                                      CKCTL_63268_IPSEC_EN |          \
-+                                      CKCTL_63268_SPI_EN |            \
-+                                      CKCTL_63268_HSSPI_EN |          \
-+                                      CKCTL_63268_PCIE_EN |           \
-+                                      CKCTL_63268_PHYMIPS_EN |        \
-+                                      CKCTL_63268_GMAC_EN |           \
-+                                      CKCTL_63268_NAND_EN |           \
-+                                      CKCTL_63268_TBUS_EN |           \
-+                                      CKCTL_63268_ROBOSW250_EN)
-+
- /* System PLL Control register        */
- #define PERF_SYS_PLL_CTL_REG          0x8
- #define SYS_PLL_SOFT_RESET            0x1
-@@ -225,6 +273,7 @@
- #define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
- #define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
-+#define PERF_IRQMASK_63268_REG(x)     (0x20 + (x) * 0x20)
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
-@@ -235,6 +284,7 @@
- #define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
- #define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
-+#define PERF_IRQSTAT_63268_REG(x)     (0x30 + (x) * 0x20)
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
-@@ -245,6 +295,7 @@
- #define PERF_EXTIRQ_CFG_REG_6358      0x14
- #define PERF_EXTIRQ_CFG_REG_6362      0x18
- #define PERF_EXTIRQ_CFG_REG_6368      0x18
-+#define PERF_EXTIRQ_CFG_REG_63268     0x18
- #define PERF_EXTIRQ_CFG_REG2_6358     0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
-@@ -275,6 +326,7 @@
- #define PERF_SOFTRESET_6358_REG               0x34
- #define PERF_SOFTRESET_6362_REG               0x10
- #define PERF_SOFTRESET_6368_REG               0x10
-+#define PERF_SOFTRESET_63268_REG      0x10
- #define SOFTRESET_3368_SPI_MASK               (1 << 0)
- #define SOFTRESET_3368_ENET_MASK      (1 << 2)
-@@ -368,6 +420,26 @@
- #define SOFTRESET_6368_USBH_MASK      (1 << 12)
- #define SOFTRESET_6368_PCM_MASK               (1 << 13)
-+#define SOFTRESET_63268_SPI_MASK      (1 << 0)
-+#define SOFTRESET_63268_IPSEC_MASK    (1 << 1)
-+#define SOFTRESET_63268_EPHY_MASK     (1 << 2)
-+#define SOFTRESET_63268_SAR_MASK      (1 << 3)
-+#define SOFTRESET_63268_ENETSW_MASK   (1 << 4)
-+#define SOFTRESET_63268_USBS_MASK     (1 << 5)
-+#define SOFTRESET_63268_USBH_MASK     (1 << 6)
-+#define SOFTRESET_63268_PCM_MASK      (1 << 7)
-+#define SOFTRESET_63268_PCIE_CORE_MASK        (1 << 8)
-+#define SOFTRESET_63268_PCIE_MASK     (1 << 9)
-+#define SOFTRESET_63268_PCIE_EXT_MASK (1 << 10)
-+#define SOFTRESET_63268_WLAN_SHIM_MASK        (1 << 11)
-+#define SOFTRESET_63268_DDR_PHY_MASK  (1 << 12)
-+#define SOFTRESET_63268_FAP0_MASK     (1 << 13)
-+#define SOFTRESET_63268_WLAN_UBUS_MASK        (1 << 14)
-+#define SOFTRESET_63268_DECT_MASK     (1 << 15)
-+#define SOFTRESET_63268_FAP1_MASK     (1 << 16)
-+#define SOFTRESET_63268_PCIE_HARD_MASK        (1 << 17)
-+#define SOFTRESET_63268_GPHY_MASK     (1 << 18)
-+
- /* MIPS PLL control register */
- #define PERF_MIPSPLLCTL_REG           0x34
- #define MIPSPLLCTL_N1_SHIFT           20
-@@ -1367,6 +1439,13 @@
- #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
- #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
-+#define MISC_STRAPBUS_63268_REG               0x14
-+#define STRAPBUS_63268_HSSPI_CLK_FAST (1 << 9)
-+#define STRAPBUS_63268_BOOT_SEL_SERIAL        (1 << 11)
-+#define STRAPBUS_63268_BOOT_SEL_NAND  (0 << 11)
-+#define STRAPBUS_63268_FCVO_SHIFT     21
-+#define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -26,6 +26,7 @@ static inline int is_bcm63xx_internal_re
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
-+      case BCM63268_CPU_ID:
-               if (offset >= 0xb0000000 && offset < 0xb1000000)
-                       return 1;
-               break;
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -176,7 +176,8 @@ static int __init register_shared(void)
-       else
-               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-+              BCMCPU_IS_63268())
-               chan_count = 32;
-       else if (BCMCPU_IS_6345())
-               chan_count = 8;
-@@ -284,7 +285,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
-       int ret;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
-+              !BCMCPU_IS_63268())
-               return -ENODEV;
-       ret = register_shared();
-@@ -305,6 +307,8 @@ bcm63xx_enetsw_register(const struct bcm
-               enetsw_pd.num_ports = ENETSW_PORTS_6328;
-       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+      else if (BCMCPU_IS_63268())
-+              enetsw_pd.num_ports = ENETSW_PORTS_63268;
-       enetsw_pd.dma_has_sram = true;
-       enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -67,6 +67,7 @@ struct bcm63xx_enet_platform_data {
- #define ENETSW_MAX_PORT       8
- #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-+#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
- #define ENETSW_RGMII_PORT0    4
diff --git a/target/linux/bcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
deleted file mode 100644 (file)
index e9f9e2b..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:22:40 +0100
-Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
-
----
- arch/mips/bcm63xx/reset.c                       | 3 ++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
- arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
- 3 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -137,7 +137,8 @@
- #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI    0
- #define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
--                               SOFTRESET_63268_PCIE_CORE_MASK)
-+                               SOFTRESET_63268_PCIE_CORE_MASK | \
-+                               SOFTRESET_63268_PCIE_HARD_MASK)
- #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -46,6 +46,11 @@
- #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
-                                       BCM_PCIE_MEM_SIZE_6328 - 1)
-+#define BCM_PCIE_MEM_BASE_PA_63268    0x11000000
-+#define BCM_PCIE_MEM_SIZE_63268               (15 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_63268     (BCM_PCIE_MEM_BASE_PA_63268 +   \
-+                                      BCM_PCIE_MEM_SIZE_63268 - 1)
-+
- /*
-  * Internal registers are accessed through KSEG3
-  */
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+      } else if (BCMCPU_IS_63268()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
-       }
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-+      case BCM63268_CPU_ID:
-               return bcm63xx_register_pcie();
-       case BCM3368_CPU_ID:
-       case BCM6348_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
deleted file mode 100644 (file)
index 1b2cbfb..0000000
+++ /dev/null
@@ -1,697 +0,0 @@
-From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 01:24:09 +0100
-Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
-
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |   8 +-
- arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
- arch/mips/bcm63xx/dev-flash.c                     |   3 +
- arch/mips/bcm63xx/dev-spi.c                       |   2 +-
- arch/mips/bcm63xx/irq.c                           |  10 ++
- arch/mips/bcm63xx/prom.c                          |   2 +-
- arch/mips/bcm63xx/reset.c                         |  24 +++++
- arch/mips/bcm63xx/setup.c                         |   5 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 13 files changed, 291 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -19,6 +19,11 @@ config BCM63XX_EHCI
-       select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-       select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+config BCM63XX_CPU_6318
-+      bool "support 6318 CPU"
-+      select SYS_HAS_CPU_BMIPS32_3300
-+      select HW_HAS_PCI
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -697,7 +697,7 @@ void __init board_prom_init(void)
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-               val = 0x18000000;
-       } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -289,7 +289,9 @@ static void hsspi_set(struct clk *clk, i
- {
-       u32 mask;
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318())
-+              mask = CKCTL_6318_HSSPI_EN;
-+      else if (BCMCPU_IS_6328())
-               mask = CKCTL_6328_HSSPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_HSSPI_EN;
-@@ -444,6 +446,19 @@ static struct clk_lookup bcm3368_clks[]
-       CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
- };
-+static struct clk_lookup bcm6318_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbh),
-+      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+};
-+
- static struct clk_lookup bcm6328_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-@@ -565,6 +580,7 @@ static struct clk_lookup bcm63268_clks[]
-       CLKDEV_INIT(NULL, "pcie", &clk_pcie),
- };
-+#define HSSPI_PLL_HZ_6318     250000000
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
-@@ -574,6 +590,10 @@ static int __init bcm63xx_clk_init(void)
-       case BCM3368_CPU_ID:
-               clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
-               break;
-+      case BCM6318_CPU_ID:
-+              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6318;
-+              clkdev_add_table(bcm6318_clks, ARRAY_SIZE(bcm6318_clks));
-+              break;
-       case BCM6328_CPU_ID:
-               clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
-               clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
-       __GEN_CPU_IRQ_TABLE(3368)
- };
-+static const unsigned long bcm6318_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(6318)
-+};
-+
-+static const int bcm6318_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(6318)
-+};
-+
- static const unsigned long bcm6328_regs_base[] = {
-       __GEN_CPU_REGS_TABLE(6328)
- };
-@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
-       return bcm63xx_memory_size;
- }
-+#define STRAP_OVERRIDE_BUS_REG                0x0
-+#define OVERRIDE_BUS_MIPS_FREQ_SHIFT  23
-+#define OVERRIDE_BUS_MIPS_FREQ_MASK   (0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
-+
- static unsigned int detect_cpu_clock(void)
- {
-       u32 cpu_id = bcm63xx_get_cpu_id();
-@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
-       case BCM3368_CPU_ID:
-               return 300000000;
-+      case BCM6318_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
-+
-+              pr_info("strap_override_bus = %08x\n", tmp);
-+
-+              mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
-+                              >> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
-+
-+              switch (mips_pll_fcvo) {
-+              case 0:
-+                      return 166000000;
-+              case 1:
-+                      return 400000000;
-+              case 2:
-+                      return 250000000;
-+              case 3:
-+                      return 333000000;
-+              };
-+      }
-       case BCM6328_CPU_ID:
-       {
-               unsigned int tmp, mips_pll_fcvo;
-@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
-+      if (BCMCPU_IS_6318()) {
-+              val = bcm_sdram_readl(SDRAM_CFG_REG);
-+              val = val & SDRAM_CFG_6318_SPACE_MASK;
-+              val >>= SDRAM_CFG_6318_SPACE_SHIFT;
-+              return 1 << (val + 20);
-+      }
-+
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-@@ -343,6 +384,12 @@ void __init bcm63xx_cpu_init(void)
-       switch (current_cpu_type()) {
-       case CPU_BMIPS3300:
-+              if ((read_c0_prid() & 0xff) >= 0x33) {
-+                      /* BCM6318 */
-+                      chipid_reg = BCM_6368_PERF_BASE;
-+                      break;
-+              }
-+
-               if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
-                       __cpu_name[cpu] = "Broadcom BCM6338";
-               /* fall-through */
-@@ -390,6 +437,10 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       switch (bcm63xx_cpu_id) {
-+      case BCM6318_CPU_ID:
-+              bcm63xx_regs_base = bcm6318_regs_base;
-+              bcm63xx_irqs = bcm6318_irqs;
-+              break;
-       case BCM3368_CPU_ID:
-               bcm63xx_regs_base = bcm3368_regs_base;
-               bcm63xx_irqs = bcm3368_irqs;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
-       u32 val;
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              /* only support serial flash */
-+              return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6328_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -38,7 +38,7 @@ static struct platform_device bcm63xx_sp
- int __init bcm63xx_spi_register(void)
- {
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -48,6 +48,19 @@ void __init arch_init_irq(void)
-               ext_irqs[3] = BCM_3368_EXT_IRQ3;
-               ext_shift = 4;
-               break;
-+      case BCM6318_CPU_ID:
-+              periph_bases[0] += PERF_IRQMASK_6318_REG;
-+              periph_irq_count = 1;
-+              periph_width = 4;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6318;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[2] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[3] = BCM_6318_EXT_IRQ0;
-+              ext_shift = 4;
-+              break;
-       case BCM6328_CPU_ID:
-               periph_bases[0] += PERF_IRQMASK_6328_REG(0);
-               periph_bases[1] += PERF_IRQMASK_6328_REG(1);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -68,7 +68,7 @@ void __init prom_init(void)
-                       if (reg & OTP_6328_REG3_TP1_DISABLED)
-                               bmips_smp_enabled = 0;
--              } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-+              } else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-                       bmips_smp_enabled = 0;
-               }
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -44,6 +44,23 @@
- #define BCM3368_RESET_PCIE    0
- #define BCM3368_RESET_PCIE_EXT        0
-+
-+#define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
-+#define BCM6318_RESET_ENET    0
-+#define BCM6318_RESET_USBH    SOFTRESET_6318_USBH_MASK
-+#define BCM6318_RESET_USBD    SOFTRESET_6318_USBS_MASK
-+#define BCM6318_RESET_DSL     0
-+#define BCM6318_RESET_SAR     SOFTRESET_6318_SAR_MASK
-+#define BCM6318_RESET_EPHY    SOFTRESET_6318_EPHY_MASK
-+#define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
-+#define BCM6318_RESET_PCM     0
-+#define BCM6318_RESET_MPI     0
-+#define BCM6318_RESET_PCIE    \
-+                              (SOFTRESET_6318_PCIE_MASK |             \
-+                               SOFTRESET_6318_PCIE_CORE_MASK |        \
-+                               SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
-+
- #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET    0
- #define BCM6328_RESET_USBH    SOFTRESET_6328_USBH_MASK
-@@ -148,6 +165,10 @@ static const u32 bcm3368_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(3368)
- };
-+static const u32 bcm6318_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(6318)
-+};
-+
- static const u32 bcm6328_reset_bits[] = {
-       __GEN_RESET_BITS_TABLE(6328)
- };
-@@ -184,6 +205,9 @@ static int __init bcm63xx_reset_bits_ini
-       if (BCMCPU_IS_3368()) {
-               reset_reg = PERF_SOFTRESET_6358_REG;
-               bcm63xx_reset_bits = bcm3368_reset_bits;
-+      } else if (BCMCPU_IS_6318()) {
-+              reset_reg = PERF_SOFTRESET_6318_REG;
-+              bcm63xx_reset_bits = bcm6318_reset_bits;
-       } else if (BCMCPU_IS_6328()) {
-               reset_reg = PERF_SOFTRESET_6328_REG;
-               bcm63xx_reset_bits = bcm6328_reset_bits;
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -72,6 +72,9 @@ void bcm63xx_machine_reboot(void)
-       case BCM3368_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
-               break;
-+      case BCM6318_CPU_ID:
-+              perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
-+              break;
-       case BCM6328_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
-               break;
-@@ -111,7 +114,7 @@ void bcm63xx_machine_reboot(void)
-               bcm6348_a1_reboot();
-       pr_info("triggering watchdog soft-reset...\n");
--      if (BCMCPU_IS_6328()) {
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
-               bcm_wdt_writel(1, WDT_SOFTRESET_REG);
-       } else {
-               reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -11,6 +11,7 @@
-  * arm mach-types)
-  */
- #define BCM3368_CPU_ID                0x3368
-+#define BCM6318_CPU_ID                0x6318
- #define BCM6328_CPU_ID                0x6328
- #define BCM63281_CPU_ID               0x63281
- #define BCM63283_CPU_ID               0x63283
-@@ -39,6 +40,10 @@ static inline u32 __pure __bcm63xx_get_c
-               case BCM3368_CPU_ID:
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+              case BCM6318_CPU_ID:
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6328
-               case BCM6328_CPU_ID:
- #endif
-@@ -88,6 +93,7 @@ static inline u32 __pure bcm63xx_get_cpu
- }
- #define BCMCPU_IS_3368()      (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-+#define BCMCPU_IS_6318()      (bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
- #define BCMCPU_IS_6328()      (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
- #define BCMCPU_IS_6338()      (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
- #define BCMCPU_IS_6345()      (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
-@@ -99,6 +105,8 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6318() \
-+      (bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
- #define BCMCPU_VARIANT_IS_63281() \
-       (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
- #define BCMCPU_VARIANT_IS_63283() \
-@@ -253,6 +261,56 @@ enum bcm63xx_regs_set {
- #define BCM_3368_MISC_BASE            (0xdeadbeef)
- /*
-+ * 6318 register sets base address
-+ */
-+#define BCM_6318_DSL_LMEM_BASE                (0xdeadbeef)
-+#define BCM_6318_PERF_BASE            (0xb0000000)
-+#define BCM_6318_TIMER_BASE           (0xb0000040)
-+#define BCM_6318_WDT_BASE             (0xb0000068)
-+#define BCM_6318_UART0_BASE           (0xb0000100)
-+#define BCM_6318_UART1_BASE           (0xdeadbeef)
-+#define BCM_6318_GPIO_BASE            (0xb0000080)
-+#define BCM_6318_SPI_BASE             (0xdeadbeef)
-+#define BCM_6318_HSSPI_BASE           (0xb0003000)
-+#define BCM_6318_UDC0_BASE            (0xdeadbeef)
-+#define BCM_6318_USBDMA_BASE          (0xb0006800)
-+#define BCM_6318_OHCI0_BASE           (0xb0005100)
-+#define BCM_6318_OHCI_PRIV_BASE               (0xdeadbeef)
-+#define BCM_6318_USBH_PRIV_BASE               (0xb0005200)
-+#define BCM_6318_USBD_BASE            (0xb0006000)
-+#define BCM_6318_MPI_BASE             (0xdeadbeef)
-+#define BCM_6318_PCMCIA_BASE          (0xdeadbeef)
-+#define BCM_6318_PCIE_BASE            (0xb0010000)
-+#define BCM_6318_SDRAM_REGS_BASE      (0xdeadbeef)
-+#define BCM_6318_DSL_BASE             (0xdeadbeef)
-+#define BCM_6318_UBUS_BASE            (0xdeadbeef)
-+#define BCM_6318_ENET0_BASE           (0xdeadbeef)
-+#define BCM_6318_ENET1_BASE           (0xdeadbeef)
-+#define BCM_6318_ENETDMA_BASE         (0xb0088000)
-+#define BCM_6318_ENETDMAC_BASE                (0xb0088200)
-+#define BCM_6318_ENETDMAS_BASE                (0xb0088400)
-+#define BCM_6318_ENETSW_BASE          (0xb0080000)
-+#define BCM_6318_EHCI0_BASE           (0xb0005000)
-+#define BCM_6318_SDRAM_BASE           (0xb0004000)
-+#define BCM_6318_MEMC_BASE            (0xdeadbeef)
-+#define BCM_6318_DDR_BASE             (0xdeadbeef)
-+#define BCM_6318_M2M_BASE             (0xdeadbeef)
-+#define BCM_6318_ATM_BASE             (0xdeadbeef)
-+#define BCM_6318_XTM_BASE             (0xdeadbeef)
-+#define BCM_6318_XTMDMA_BASE          (0xb000c000)
-+#define BCM_6318_XTMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6318_XTMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6318_PCM_BASE             (0xdeadbeef)
-+#define BCM_6318_PCMDMA_BASE          (0xdeadbeef)
-+#define BCM_6318_PCMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6318_PCMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6318_RNG_BASE             (0xdeadbeef)
-+#define BCM_6318_MISC_BASE            (0xb0000280)
-+#define BCM_6318_OTP_BASE             (0xdeadbeef)
-+
-+#define BCM_6318_STRAP_BASE           (0xb0000900)
-+
-+/*
-  * 6328 register sets base address
-  */
- #define BCM_6328_DSL_LMEM_BASE                (0xdeadbeef)
-@@ -775,6 +833,55 @@ enum bcm63xx_irq {
- #define BCM_3368_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
- #define BCM_3368_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
-+/*
-+ * 6318 irqs
-+ */
-+#define BCM_6318_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
-+#define BCM_6318_VERY_HIGH_IRQ_BASE   (BCM_6318_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_6318_TIMER_IRQ            (IRQ_INTERNAL_BASE + 31)
-+#define BCM_6318_SPI_IRQ              0
-+#define BCM_6318_UART0_IRQ            (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6318_UART1_IRQ            0
-+#define BCM_6318_DSL_IRQ              (IRQ_INTERNAL_BASE + 21)
-+#define BCM_6318_UDC0_IRQ             0
-+#define BCM_6318_ENET0_IRQ            0
-+#define BCM_6318_ENET1_IRQ            0
-+#define BCM_6318_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6318_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 29)
-+#define BCM_6318_OHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 9)
-+#define BCM_6318_EHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_USBD_IRQ             (IRQ_INTERNAL_BASE + 4)
-+#define BCM_6318_USBD_RXDMA0_IRQ      (IRQ_INTERNAL_BASE + 5)
-+#define BCM_6318_USBD_TXDMA0_IRQ      (IRQ_INTERNAL_BASE + 6)
-+#define BCM_6318_USBD_RXDMA1_IRQ      (IRQ_INTERNAL_BASE + 7)
-+#define BCM_6318_USBD_TXDMA1_IRQ      (IRQ_INTERNAL_BASE + 8)
-+#define BCM_6318_USBD_RXDMA2_IRQ      (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6318_USBD_TXDMA2_IRQ      (IRQ_INTERNAL_BASE + 10)
-+#define BCM_6318_PCMCIA_IRQ           0
-+#define BCM_6318_ENET0_RXDMA_IRQ      0
-+#define BCM_6318_ENET0_TXDMA_IRQ      0
-+#define BCM_6318_ENET1_RXDMA_IRQ      0
-+#define BCM_6318_ENET1_TXDMA_IRQ      0
-+#define BCM_6318_PCI_IRQ              (IRQ_INTERNAL_BASE + 23)
-+#define BCM_6318_ATM_IRQ              0
-+#define BCM_6318_ENETSW_RXDMA0_IRQ    (BCM_6318_HIGH_IRQ_BASE + 0)
-+#define BCM_6318_ENETSW_RXDMA1_IRQ    (BCM_6318_HIGH_IRQ_BASE + 1)
-+#define BCM_6318_ENETSW_RXDMA2_IRQ    (BCM_6318_HIGH_IRQ_BASE + 2)
-+#define BCM_6318_ENETSW_RXDMA3_IRQ    (BCM_6318_HIGH_IRQ_BASE + 3)
-+#define BCM_6318_ENETSW_TXDMA0_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_ENETSW_TXDMA1_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 11)
-+#define BCM_6318_ENETSW_TXDMA2_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 12)
-+#define BCM_6318_ENETSW_TXDMA3_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 13)
-+#define BCM_6318_XTM_IRQ              (BCM_6318_HIGH_IRQ_BASE + 31)
-+#define BCM_6318_XTM_DMA0_IRQ         (BCM_6318_HIGH_IRQ_BASE + 11)
-+
-+#define BCM_6318_PCM_DMA0_IRQ         (IRQ_INTERNAL_BASE + 2)
-+#define BCM_6318_PCM_DMA1_IRQ         (IRQ_INTERNAL_BASE + 3)
-+#define BCM_6318_EXT_IRQ0             (IRQ_INTERNAL_BASE + 24)
-+#define BCM_6318_EXT_IRQ1             (IRQ_INTERNAL_BASE + 25)
-+#define BCM_6318_EXT_IRQ2             (IRQ_INTERNAL_BASE + 26)
-+#define BCM_6318_EXT_IRQ3             (IRQ_INTERNAL_BASE + 27)
- /*
-  * 6328 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -53,6 +53,39 @@
-                                        CKCTL_3368_EMUSB_EN | \
-                                        CKCTL_3368_USBU_EN)
-+#define CKCTL_6318_ADSL_ASB_EN                (1 << 0)
-+#define CKCTL_6318_USB_ASB_EN         (1 << 1)
-+#define CKCTL_6318_MIPS_ASB_EN                (1 << 2)
-+#define CKCTL_6318_PCIE_ASB_EN                (1 << 3)
-+#define CKCTL_6318_PHYMIPS_ASB_EN     (1 << 4)
-+#define CKCTL_6318_ROBOSW_ASB_EN      (1 << 5)
-+#define CKCTL_6318_SAR_ASB_EN         (1 << 6)
-+#define CKCTL_6318_SDR_ASB_EN         (1 << 7)
-+#define CKCTL_6318_SWREG_ASB_EN               (1 << 8)
-+#define CKCTL_6318_PERIPH_ASB_EN      (1 << 9)
-+#define CKCTL_6318_CPUBUS160_EN               (1 << 10)
-+#define CKCTL_6318_ADSL_EN            (1 << 11)
-+#define CKCTL_6318_SAR125_EN          (1 << 12)
-+#define CKCTL_6318_MIPS_EN            (1 << 13)
-+#define CKCTL_6318_PCIE_EN            (1 << 14)
-+#define CKCTL_6318_ROBOSW250_EN               (1 << 16)
-+#define CKCTL_6318_ROBOSW025_EN               (1 << 17)
-+#define CKCTL_6318_SDR_EN             (1 << 19)
-+#define CKCTL_6318_USB_EN             (1 << 20) /* both device and host */
-+#define CKCTL_6318_HSSPI_EN           (1 << 25)
-+#define CKCTL_6318_PCIE25_EN          (1 << 27)
-+#define CKCTL_6318_PHYMIPS_EN         (1 << 28)
-+#define CKCTL_6318_ADSL_AFE_EN                (1 << 29)
-+#define CKCTL_6318_ADSL_QPROC_EN      (1 << 30)
-+
-+#define CKCTL_6318_ALL_SAFE_EN                (CKCTL_6318_PHYMIPS_EN |        \
-+                                      CKCTL_6318_ADSL_QPROC_EN |      \
-+                                      CKCTL_6318_ADSL_AFE_EN |        \
-+                                      CKCTL_6318_ADSL_EN |            \
-+                                      CKCTL_6318_SAR_EN  |            \
-+                                      CKCTL_6318_USB_EN |             \
-+                                      CKCTL_6318_PCIE_EN)
-+
- #define CKCTL_6328_PHYMIPS_EN         (1 << 0)
- #define CKCTL_6328_ADSL_QPROC_EN      (1 << 1)
- #define CKCTL_6328_ADSL_AFE_EN                (1 << 2)
-@@ -260,12 +293,27 @@
-                                       CKCTL_63268_TBUS_EN |           \
-                                       CKCTL_63268_ROBOSW250_EN)
-+/* UBUS Clock Control register */
-+#define PERF_UB_CKCTL_REG             0x10
-+
-+#define UB_CKCTL_6318_ADSL_EN         (1 << 0)
-+#define UB_CKCTL_6318_ARB_EN          (1 << 1)
-+#define UB_CKCTL_6318_MIPS_EN         (1 << 2)
-+#define UB_CKCTL_6318_PCIE_EN         (1 << 3)
-+#define UB_CKCTL_6318_PERIPH_EN               (1 << 4)
-+#define UB_CKCTL_6318_PHYMIPS_EN      (1 << 5)
-+#define UB_CKCTL_6318_ROBOSW_EN               (1 << 6)
-+#define UB_CKCTL_6318_SAR_EN          (1 << 7)
-+#define UB_CKCTL_6318_SDR_EN          (1 << 8)
-+#define UB_CKCTL_6318_USB_EN          (1 << 9)
-+
- /* System PLL Control register        */
- #define PERF_SYS_PLL_CTL_REG          0x8
- #define SYS_PLL_SOFT_RESET            0x1
- /* Interrupt Mask register */
- #define PERF_IRQMASK_3368_REG         0xc
-+#define PERF_IRQMASK_6318_REG         0x20
- #define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG         0xc
- #define PERF_IRQMASK_6345_REG         0xc
-@@ -277,6 +325,7 @@
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
-+#define PERF_IRQSTAT_6318_REG         0x30
- #define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG         0x10
- #define PERF_IRQSTAT_6345_REG         0x10
-@@ -288,6 +337,7 @@
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
-+#define PERF_EXTIRQ_CFG_REG_6318      0x18
- #define PERF_EXTIRQ_CFG_REG_6328      0x18
- #define PERF_EXTIRQ_CFG_REG_6338      0x14
- #define PERF_EXTIRQ_CFG_REG_6345      0x14
-@@ -322,6 +372,7 @@
- /* Soft Reset register */
- #define PERF_SOFTRESET_REG            0x28
-+#define PERF_SOFTRESET_6318_REG               0x10
- #define PERF_SOFTRESET_6328_REG               0x10
- #define PERF_SOFTRESET_6358_REG               0x34
- #define PERF_SOFTRESET_6362_REG               0x10
-@@ -335,6 +386,18 @@
- #define SOFTRESET_3368_USBS_MASK      (1 << 11)
- #define SOFTRESET_3368_PCM_MASK               (1 << 13)
-+#define SOFTRESET_6318_SPI_MASK               (1 << 0)
-+#define SOFTRESET_6318_EPHY_MASK      (1 << 1)
-+#define SOFTRESET_6318_SAR_MASK               (1 << 2)
-+#define SOFTRESET_6318_ENETSW_MASK    (1 << 3)
-+#define SOFTRESET_6318_USBS_MASK      (1 << 4)
-+#define SOFTRESET_6318_USBH_MASK      (1 << 5)
-+#define SOFTRESET_6318_PCIE_CORE_MASK (1 << 6)
-+#define SOFTRESET_6318_PCIE_MASK      (1 << 7)
-+#define SOFTRESET_6318_PCIE_EXT_MASK  (1 << 8)
-+#define SOFTRESET_6318_PCIE_HARD_MASK (1 << 9)
-+#define SOFTRESET_6318_ADSL_MASK      (1 << 10)
-+
- #define SOFTRESET_6328_SPI_MASK               (1 << 0)
- #define SOFTRESET_6328_EPHY_MASK      (1 << 1)
- #define SOFTRESET_6328_SAR_MASK               (1 << 2)
-@@ -506,8 +569,17 @@
- #define TIMER_IRQSTAT_TIMER1_IR_EN    (1 << 9)
- #define TIMER_IRQSTAT_TIMER2_IR_EN    (1 << 10)
-+#define TIMER_IRQMASK_6318_REG                0x0
-+#define TIMER_IRQSTAT_6318_REG                0x4
-+#define IRQSTATMASK_TIMER0            (1 << 0)
-+#define IRQSTATMASK_TIMER1            (1 << 1)
-+#define IRQSTATMASK_TIMER2            (1 << 2)
-+#define IRQSTATMASK_TIMER3            (1 << 3)
-+#define IRQSTATMASK_WDT                       (1 << 4)
-+
- /* Timer control register */
- #define TIMER_CTLx_REG(x)             (0x4 + (x * 4))
-+#define TIMER_CTRx_6318_REG(x)                (0x8 + (x * 4))
- #define TIMER_CTL0_REG                        0x4
- #define TIMER_CTL1_REG                        0x8
- #define TIMER_CTL2_REG                        0xC
-@@ -1254,6 +1326,8 @@
- #define SDRAM_CFG_32B_MASK            (1 << SDRAM_CFG_32B_SHIFT)
- #define SDRAM_CFG_BANK_SHIFT          13
- #define SDRAM_CFG_BANK_MASK           (1 << SDRAM_CFG_BANK_SHIFT)
-+#define SDRAM_CFG_6318_SPACE_SHIFT    4
-+#define SDRAM_CFG_6318_SPACE_MASK     (0xf << SDRAM_CFG_6318_SPACE_SHIFT)
- #define SDRAM_MBASE_REG                       0xc
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -23,6 +23,7 @@ static inline int is_bcm63xx_internal_re
-               if (offset >= 0xfff00000)
-                       return 1;
-               break;
-+      case BCM6318_CPU_ID:
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+              !BCMCPU_IS_63268())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-usb-usbd.c
-+++ b/arch/mips/bcm63xx/dev-usb-usbd.c
-@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
-               IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
-       int i;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-               return 0;
-       usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -176,8 +176,8 @@ static int __init register_shared(void)
-       else
-               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
--              BCMCPU_IS_63268())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+              BCMCPU_IS_6368() || BCMCPU_IS_63268())
-               chan_count = 32;
-       else if (BCMCPU_IS_6345())
-               chan_count = 8;
-@@ -285,8 +285,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
-       int ret;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
--              !BCMCPU_IS_63268())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+              !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return -ENODEV;
-       ret = register_shared();
-@@ -303,7 +303,7 @@ bcm63xx_enetsw_register(const struct bcm
-       memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
-               enetsw_pd.num_ports = ENETSW_PORTS_6328;
-       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               enetsw_pd.num_ports = ENETSW_PORTS_6368;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -10,6 +10,8 @@ int __init bcm63xx_gpio_init(void);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              return 50;
-       case BCM6328_CPU_ID:
-               return 32;
-       case BCM3368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-+              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-               return 0;
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/bcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/bcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
deleted file mode 100644 (file)
index e359311..0000000
+++ /dev/null
@@ -1,156 +0,0 @@
-From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 14:17:50 +0100
-Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
-
----
- arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
- arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
- 3 files changed, 34 insertions(+), 14 deletions(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -29,7 +29,9 @@
-       [BCM63XX_RESET_PCM]             = BCM## __cpu ##_RESET_PCM,     \
-       [BCM63XX_RESET_MPI]             = BCM## __cpu ##_RESET_MPI,     \
-       [BCM63XX_RESET_PCIE]            = BCM## __cpu ##_RESET_PCIE,    \
--      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT,
-+      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT, \
-+      [BCM63XX_RESET_PCIE_CORE]       = BCM## __cpu ##_RESET_PCIE_CORE, \
-+      [BCM63XX_RESET_PCIE_HARD]       = BCM## __cpu ##_RESET_PCIE_HARD,
- #define BCM3368_RESET_SPI     SOFTRESET_3368_SPI_MASK
- #define BCM3368_RESET_ENET    SOFTRESET_3368_ENET_MASK
-@@ -43,6 +45,8 @@
- #define BCM3368_RESET_MPI     SOFTRESET_3368_MPI_MASK
- #define BCM3368_RESET_PCIE    0
- #define BCM3368_RESET_PCIE_EXT        0
-+#define BCM3368_RESET_PCIE_CORE       0
-+#define BCM3368_RESET_PCIE_HARD       0
- #define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
-@@ -55,11 +59,10 @@
- #define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
- #define BCM6318_RESET_PCM     0
- #define BCM6318_RESET_MPI     0
--#define BCM6318_RESET_PCIE    \
--                              (SOFTRESET_6318_PCIE_MASK |             \
--                               SOFTRESET_6318_PCIE_CORE_MASK |        \
--                               SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE    SOFTRESET_6318_PCIE_MASK
- #define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
-+#define BCM6318_RESET_PCIE_CORE       SOFTRESET_6318_PCIE_CORE_MASK
-+#define BCM6318_RESET_PCIE_HARD       SOFTRESET_6318_PCIE_HARD_MASK
- #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET    0
-@@ -71,11 +74,10 @@
- #define BCM6328_RESET_ENETSW  SOFTRESET_6328_ENETSW_MASK
- #define BCM6328_RESET_PCM     SOFTRESET_6328_PCM_MASK
- #define BCM6328_RESET_MPI     0
--#define BCM6328_RESET_PCIE    \
--                              (SOFTRESET_6328_PCIE_MASK |             \
--                               SOFTRESET_6328_PCIE_CORE_MASK |        \
--                               SOFTRESET_6328_PCIE_HARD_MASK)
-+#define BCM6328_RESET_PCIE    SOFTRESET_6328_PCIE_MASK
- #define BCM6328_RESET_PCIE_EXT        SOFTRESET_6328_PCIE_EXT_MASK
-+#define BCM6328_RESET_PCIE_CORE       SOFTRESET_6328_PCIE_CORE_MASK
-+#define BCM6328_RESET_PCIE_HARD       SOFTRESET_6328_PCIE_HARD_MASK
- #define BCM6338_RESET_SPI     SOFTRESET_6338_SPI_MASK
- #define BCM6338_RESET_ENET    SOFTRESET_6338_ENET_MASK
-@@ -89,6 +91,8 @@
- #define BCM6338_RESET_MPI     0
- #define BCM6338_RESET_PCIE    0
- #define BCM6338_RESET_PCIE_EXT        0
-+#define BCM6338_RESET_PCIE_CORE       0
-+#define BCM6338_RESET_PCIE_HARD       0
- #define BCM6348_RESET_SPI     SOFTRESET_6348_SPI_MASK
- #define BCM6348_RESET_ENET    SOFTRESET_6348_ENET_MASK
-@@ -102,6 +106,8 @@
- #define BCM6348_RESET_MPI     0
- #define BCM6348_RESET_PCIE    0
- #define BCM6348_RESET_PCIE_EXT        0
-+#define BCM6348_RESET_PCIE_CORE       0
-+#define BCM6348_RESET_PCIE_HARD       0
- #define BCM6358_RESET_SPI     SOFTRESET_6358_SPI_MASK
- #define BCM6358_RESET_ENET    SOFTRESET_6358_ENET_MASK
-@@ -115,6 +121,8 @@
- #define BCM6358_RESET_MPI     SOFTRESET_6358_MPI_MASK
- #define BCM6358_RESET_PCIE    0
- #define BCM6358_RESET_PCIE_EXT        0
-+#define BCM6358_RESET_PCIE_CORE       0
-+#define BCM6358_RESET_PCIE_HARD       0
- #define BCM6362_RESET_SPI     SOFTRESET_6362_SPI_MASK
- #define BCM6362_RESET_ENET    0
-@@ -126,9 +134,10 @@
- #define BCM6362_RESET_ENETSW  SOFTRESET_6362_ENETSW_MASK
- #define BCM6362_RESET_PCM     SOFTRESET_6362_PCM_MASK
- #define BCM6362_RESET_MPI     0
--#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
--                               SOFTRESET_6362_PCIE_CORE_MASK)
-+#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
- #define BCM6362_RESET_PCIE_EXT        SOFTRESET_6362_PCIE_EXT_MASK
-+#define BCM6362_RESET_PCIE_CORE       SOFTRESET_6362_PCIE_CORE_MASK
-+#define BCM6362_RESET_PCIE_HARD       0
- #define BCM6368_RESET_SPI     SOFTRESET_6368_SPI_MASK
- #define BCM6368_RESET_ENET    0
-@@ -142,6 +151,8 @@
- #define BCM6368_RESET_MPI     SOFTRESET_6368_MPI_MASK
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
-+#define BCM6368_RESET_PCIE_CORE       0
-+#define BCM6368_RESET_PCIE_HARD       0
- #define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
- #define BCM63268_RESET_ENET   0
-@@ -153,10 +164,10 @@
- #define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
- #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI    0
--#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
--                               SOFTRESET_63268_PCIE_CORE_MASK | \
--                               SOFTRESET_63268_PCIE_HARD_MASK)
-+#define BCM63268_RESET_PCIE   SOFTRESET_63268_PCIE_MASK
- #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
-+#define BCM63268_RESET_PCIE_CORE      SOFTRESET_63268_PCIE_CORE_MASK
-+#define BCM63268_RESET_PCIE_HARD      SOFTRESET_63268_PCIE_HARD_MASK
- /*
-  * core reset bits
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-@@ -15,6 +15,8 @@ enum bcm63xx_core_reset {
-       BCM63XX_RESET_MPI,
-       BCM63XX_RESET_PCIE,
-       BCM63XX_RESET_PCIE_EXT,
-+      BCM63XX_RESET_PCIE_CORE,
-+      BCM63XX_RESET_PCIE_HARD,
- };
- void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
-       /* reset the PCIe core */
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
-+              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
-+              mdelay(10);
-+              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
-+      }
-       mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-       mdelay(10);
diff --git a/target/linux/bcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
deleted file mode 100644 (file)
index 3d9835d..0000000
+++ /dev/null
@@ -1,333 +0,0 @@
-From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:47:34 +0100
-Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
-
----
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
- arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
- arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
- 5 files changed, 184 insertions(+), 29 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -52,6 +52,18 @@ static void bcm_hwclock_set(u32 mask, in
-       bcm_perf_writel(reg, PERF_CKCTL_REG);
- }
-+static void bcm_ub_hwclock_set(u32 mask, int enable)
-+{
-+      u32 reg;
-+
-+      reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
-+      if (enable)
-+              reg |= mask;
-+      else
-+              reg &= ~mask;
-+      bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -362,12 +374,17 @@ static struct clk clk_ipsec = {
- static void pcie_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
-+              bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
--      else if (BCMCPU_IS_63268())
-+      } else if (BCMCPU_IS_63268()) {
-               bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
-+      }
- }
- static struct clk clk_pcie = {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,6 +41,12 @@
- #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
-                                       BCM_CB_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6318     0x10200000
-+#define BCM_PCIE_MEM_SIZE_6318                (1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6318      (BCM_PCIE_MEM_BASE_PA_6318 +    \
-+                                      BCM_PCIE_MEM_SIZE_6318 - 1)
-+
-+
- #define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
- #define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1530,6 +1530,17 @@
-  * _REG relative to RSET_PCIE
-  *************************************************************************/
-+#define PCIE_SPECIFIC_REG             0x188
-+#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT       0
-+#define SPECIFIC_ENDIAN_MODE_BAR1_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT       2
-+#define SPECIFIC_ENDIAN_MODE_BAR2_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT       4
-+#define SPECIFIC_ENDIAN_MODE_BAR3_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN       0
-+#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
-+#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN       2
-+
- #define PCIE_CONFIG2_REG              0x408
- #define CONFIG2_BAR1_SIZE_EN          1
- #define CONFIG2_BAR1_SIZE_MASK                0xf
-@@ -1575,7 +1586,54 @@
- #define PCIE_RC_INT_C                 (1 << 2)
- #define PCIE_RC_INT_D                 (1 << 3)
--#define PCIE_DEVICE_OFFSET            0x8000
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG       0x400c
-+#define C2P_MEM_WIN_ENDIAN_MODE_MASK  0x3
-+#define C2P_MEM_WIN_ENDIAN_NO_SWAP    0
-+#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
-+#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
-+#define C2P_MEM_WIN_BASE_ADDR_SHIFT   20
-+#define C2P_MEM_WIN_BASE_ADDR_MASK    (0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
-+
-+#define PCIE_RC_BAR1_CONFIG_LO_REG    0x402c
-+#define RC_BAR_CFG_LO_SIZE_256MB      0xd
-+#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT        20
-+#define RC_BAR_CFG_LO_MATCH_ADDR_MASK (0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
-+
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
-+#define C2P_BASELIMIT_LIMIT_SHIFT     20
-+#define C2P_BASELIMIT_LIMIT_MASK      (0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
-+#define C2P_BASELIMIT_BASE_SHIFT      4
-+#define C2P_BASELIMIT_BASE_MASK               (0xfff << C2P_BASELIMIT_BASE_SHIFT)
-+
-+#define PCIE_UBUS_BAR1_CFG_REMAP_REG  0x4088
-+#define BAR1_CFG_REMAP_OFFSET_SHIFT   20
-+#define BAR1_CFG_REMAP_OFFSET_MASK    (0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
-+#define BAR1_CFG_REMAP_ACCESS_EN      1
-+
-+#define PCIE_HARD_DEBUG_REG           0x4204
-+#define HARD_DEBUG_SERDES_IDDQ                (1 << 23)
-+
-+#define PCIE_CPU_INT1_MASK_CLEAR_REG  0x830c
-+#define CPU_INT_PCIE_ERR_ATTN_CPU     (1 << 0)
-+#define CPU_INT_PCIE_INTA             (1 << 1)
-+#define CPU_INT_PCIE_INTB             (1 << 2)
-+#define CPU_INT_PCIE_INTC             (1 << 3)
-+#define CPU_INT_PCIE_INTD             (1 << 4)
-+#define CPU_INT_PCIE_INTR             (1 << 5)
-+#define CPU_INT_PCIE_NMI              (1 << 6)
-+#define CPU_INT_PCIE_UBUS             (1 << 7)
-+#define CPU_INT_IPI                   (1 << 8)
-+
-+#define PCIE_EXT_CFG_INDEX_REG                0x8400
-+#define EXT_CFG_FUNC_NUM_SHIFT                12
-+#define EXT_CFG_FUNC_NUM_MASK         (0x7 << EXT_CFG_FUNC_NUM_SHIFT)
-+#define EXT_CFG_DEV_NUM_SHIFT         15
-+#define EXT_CFG_DEV_NUM_MASK          (0xf << EXT_CFG_DEV_NUM_SHIFT)
-+#define EXT_CFG_BUS_NUM_SHIFT         20
-+#define EXT_CFG_BUS_NUM_MASK          (0xff << EXT_CFG_BUS_NUM_SHIFT)
-+
-+#define PCIE_DEVICE_OFFSET_6318               0x9000
-+#define PCIE_DEVICE_OFFSET_6328               0x8000
- /*************************************************************************
-  * _REG relative to RSET_OTP
---- a/arch/mips/pci/ops-bcm63xx.c
-+++ b/arch/mips/pci/ops-bcm63xx.c
-@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_
-       if (!bcm63xx_pcie_can_access(bus, devfn))
-               return PCIBIOS_DEVICE_NOT_FOUND;
--      if (bus->number == PCIE_BUS_DEVICE)
--              reg += PCIE_DEVICE_OFFSET;
-+      if (bus->number == PCIE_BUS_DEVICE) {
-+              if (BCMCPU_IS_6318())
-+                      reg += PCIE_DEVICE_OFFSET_6318;
-+              else
-+                      reg += PCIE_DEVICE_OFFSET_6328;
-+      }
-       data = bcm_pcie_readl(reg);
-@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci
-       if (!bcm63xx_pcie_can_access(bus, devfn))
-               return PCIBIOS_DEVICE_NOT_FOUND;
--      if (bus->number == PCIE_BUS_DEVICE)
--              reg += PCIE_DEVICE_OFFSET;
-+      if (bus->number == PCIE_BUS_DEVICE) {
-+              if (BCMCPU_IS_6318())
-+                      reg += PCIE_DEVICE_OFFSET_6318;
-+              else
-+                      reg += PCIE_DEVICE_OFFSET_6328;
-+      }
-       data = bcm_pcie_readl(reg);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
- void __iomem *pci_iospace_start;
--static void __init bcm63xx_reset_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen1(void)
- {
-       u32 val;
-       u32 reg;
-@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
-       mdelay(200);
- }
--static struct clk *pcie_clk;
--
--static int __init bcm63xx_register_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen2(void)
- {
-       u32 val;
--      /* enable clock */
--      pcie_clk = clk_get(NULL, "pcie");
--      if (IS_ERR_OR_NULL(pcie_clk))
--              return -ENODEV;
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
--      clk_prepare_enable(pcie_clk);
-+      /* reset the PCIe core */
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-+      mdelay(10);
-+      val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
-+      val &= ~HARD_DEBUG_SERDES_IDDQ;
-+      bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-+      mdelay(200);
-+}
--      bcm63xx_reset_pcie();
-+static void __init bcm63xx_init_pcie_gen1(void)
-+{
-+      u32 val;
-       /* configure the PCIe bridge */
-       val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
-@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
-       val |= OPT2_CFG_TYPE1_BD_SEL;
-       bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
-+      /* set bar0 to little endian */
-+      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-+      val |= BASEMASK_REMAP_EN;
-+      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
-+
-+      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-+      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-+}
-+
-+static void __init bcm63xx_init_pcie_gen2(void)
-+{
-+      u32 val;
-+
-+      bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
-+                      CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
-+                      PCIE_CPU_INT1_MASK_CLEAR_REG);
-+
-+      val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
-+      val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
-+             C2P_BASELIMIT_BASE_SHIFT;
-+
-+      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
-+
-+      /* set bar0 to little endian */
-+      val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+      val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
-+      val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
-+      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+
-+      bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
-+      bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
-+      bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
-+
-+      bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
-+                      PCIE_EXT_CFG_INDEX_REG);
-+}
-+
-+static struct clk *pcie_clk;
-+
-+static int __init bcm63xx_register_pcie(void)
-+{
-+      u32 val;
-+
-+      /* enable clock */
-+      pcie_clk = clk_get(NULL, "pcie");
-+      if (IS_ERR_OR_NULL(pcie_clk))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(pcie_clk);
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+              bcm63xx_reset_pcie_gen1();
-+              bcm63xx_init_pcie_gen1();
-+      } else {
-+              bcm63xx_reset_pcie_gen2();
-+              bcm63xx_init_pcie_gen2();
-+      }
-+
-       /* setup class code as bridge */
-       val = bcm_pcie_readl(PCIE_IDVAL3_REG);
-       val &= ~IDVAL3_CLASS_CODE_MASK;
-@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
-       val &= ~CONFIG2_BAR1_SIZE_MASK;
-       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
--      /* set bar0 to little endian */
--      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
--      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
--      val |= BASEMASK_REMAP_EN;
--      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--
--      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
--      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
--
-       register_pci_controller(&bcm63xx_pcie_controller);
-       return 0;
-@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
-       if (!bcm63xx_pci_enabled)
-               return -ENODEV;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+      if (BCMCPU_IS_6318()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
-+      } if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-       } else if (BCMCPU_IS_63268()) {
-@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
-       }
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM63268_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/bcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
deleted file mode 100644 (file)
index 298fffd..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 12:26:57 +0100
-Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
- result
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
- arch/mips/bcm63xx/prom.c                               |  4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 3 files changed, 13 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -22,6 +22,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-+static int flash_type;
-+
- static struct mtd_partition mtd_partitions[] = {
-       {
-               .name           = "cfe",
-@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t
-       }
- }
-+void __init bcm63xx_flash_detect(void)
-+{
-+      flash_type = bcm63xx_detect_flash_type();
-+}
-+
- int __init bcm63xx_flash_register(void)
- {
--      int flash_type;
-       u32 val;
--      flash_type = bcm63xx_detect_flash_type();
--
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
-               /* read base address of boot chip select (0) */
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -17,6 +17,7 @@
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_dev_flash.h>
- void __init prom_init(void)
- {
-@@ -52,6 +53,9 @@ void __init prom_init(void)
-       reg &= ~mask;
-       bcm_perf_writel(reg, PERF_CKCTL_REG);
-+      /* detect and setup flash access */
-+      bcm63xx_flash_detect();
-+
-       /* do low level board init */
-       board_prom_init();
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -8,6 +8,8 @@ enum {
-       BCM63XX_FLASH_TYPE_NAND,
- };
-+void bcm63xx_flash_detect(void);
-+
- int __init bcm63xx_flash_register(void);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/bcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
deleted file mode 100644 (file)
index 329a156..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 13:25:25 +0100
-Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
-
-Some bootloaders leave the flash access in an invalid state with dual
-read enabled; fix it by disabling it and falling back to simple fast
-reads.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c | 51 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 51 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -16,6 +16,7 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/mtd/spi-nor.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-@@ -110,9 +111,59 @@ static int __init bcm63xx_detect_flash_t
-       }
- }
-+#define HSSPI_FLASH_CTRL_REG          0x14
-+#define FLASH_CTRL_READ_OPCODE_MASK   0xff
-+#define FLASH_CTRL_ADDR_BYTES_MASK    (0x3 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_2               (0 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_3               (1 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_4               (2 << 8)
-+#define FLASH_CTRL_DUMMY_BYTES_SHIFT  10
-+#define FLASH_CTRL_DUMMY_BYTES_MASK   (0x3 << FLASH_CTRL_DUMMY_BYTES_SHIFT)
-+#define FLASH_CTRL_MB_EN              (1 << 23)
-+
- void __init bcm63xx_flash_detect(void)
- {
-       flash_type = bcm63xx_detect_flash_type();
-+
-+      /* ensure flash mapping has sane values */
-+      if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
-+          (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+           BCMCPU_IS_63268())) {
-+              u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
-+
-+              if (val & FLASH_CTRL_MB_EN) {
-+                      /* cfe might configure non working dual-io mode */
-+                      val &= ~FLASH_CTRL_MB_EN;
-+                      val &= ~FLASH_CTRL_READ_OPCODE_MASK;
-+                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
-+                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
-+
-+                      switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
-+                      case FLASH_CTRL_ADDR_BYTES_3:
-+                              val |= SPINOR_OP_READ_FAST;
-+                              break;
-+                      case FLASH_CTRL_ADDR_BYTES_4:
-+                              val |= SPINOR_OP_READ_FAST_4B;
-+                              break;
-+                      case FLASH_CTRL_ADDR_BYTES_2:
-+                      default:
-+                              pr_warn("unsupported address byte mode (%x), not fixing up\n",
-+                                      val & FLASH_CTRL_ADDR_BYTES_MASK);
-+                              return;
-+                      }
-+              } else {
-+                      /* ensure dummy bytes is set to 1 for _FAST reads */
-+                      u8 cmd = val & FLASH_CTRL_READ_OPCODE_MASK;
-+
-+                      if (cmd != SPINOR_OP_READ_FAST && cmd != SPINOR_OP_READ_FAST_4B)
-+                              return;
-+
-+                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
-+                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
-+              }
-+
-+              bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
-+      }
- }
- int __init bcm63xx_flash_register(void)
diff --git a/target/linux/bcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/bcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
deleted file mode 100644 (file)
index a8eea5b..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -168,7 +168,11 @@ static struct clk clk_swpkt_usb = {
-  */
- static void enetsw_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328()) {
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
-+                              CKCTL_6318_ROBOSW025_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
-       } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
-@@ -220,18 +224,22 @@ static struct clk clk_pcm = {
-  */
- static void usbh_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
--      else if (BCMCPU_IS_6348())
-+      } else if (BCMCPU_IS_6348()) {
-               bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
--      else if (BCMCPU_IS_6368())
-+      } else if (BCMCPU_IS_6368()) {
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
--      else if (BCMCPU_IS_63268())
-+      } else if (BCMCPU_IS_63268()) {
-               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
--      else
-+      } else {
-               return;
-+      }
-       if (enable)
-               msleep(100);
diff --git a/target/linux/bcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch b/target/linux/bcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch
deleted file mode 100644 (file)
index 92c37c1..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_6318()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
-       }
-       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_6318()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
-       }
-       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -682,6 +682,12 @@
- #define GPIO_MODE_6368_SPI_SSN4               (1 << 30)
- #define GPIO_MODE_6368_SPI_SSN5               (1 << 31)
-+#define GPIO_PINMUX_SEL0_6318         0x1c
-+#define GPIO_PINMUX_SEL0_GPIO13_SHIFT 26
-+#define GPIO_PINMUX_SEL0_GPIO13_MASK  (0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_PWRON (1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_LED   (2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_GPIO  (3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
- #define GPIO_PINMUX_OTHR_REG          0x24
- #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
-@@ -1000,6 +1006,7 @@
- #define USBH_PRIV_SWAP_6358_REG               0x0
- #define USBH_PRIV_SWAP_6368_REG               0x1c
-+#define USBH_PRIV_SWAP_6318_REG               0x0c
- #define USBH_PRIV_SWAP_USBD_SHIFT     6
- #define USBH_PRIV_SWAP_USBD_MASK      (1 << USBH_PRIV_SWAP_USBD_SHIFT)
-@@ -1025,6 +1032,13 @@
- #define USBH_PRIV_SETUP_IOC_SHIFT     4
- #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_6318_REG      0x00
-+#define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
-+#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
-+#define USBH_PRIV_SIM_CTRL_6318_REG   0x20
-+#define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
-+
- /*************************************************************************
-  * _REG relative to RSET_USBD
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -125,6 +125,15 @@ void __init board_early_setup(const stru
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
-+
-+#if IS_ENABLED(CONFIG_USB)
-+      if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
-+              val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
-+              val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
-+              val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
-+              bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
-+      }
-+#endif
- }
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -23,6 +23,8 @@ config BCM63XX_CPU_6318
-       bool "support 6318 CPU"
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
diff --git a/target/linux/bcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/bcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
deleted file mode 100644 (file)
index cdff8d5..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -587,6 +587,9 @@
- #define TIMER_CTL_MONOTONIC_MASK      (1 << 30)
- #define TIMER_CTL_ENABLE_MASK         (1 << 31)
-+/* Clock reset control (63268 only) */
-+#define TIMER_CLK_RST_CTL_REG         0x2c
-+#define CLK_RST_CTL_USB_REF_CLK_EN    (1 << 18)
- /*************************************************************************
-  * _REG relative to RSET_WDT
-@@ -1534,6 +1537,11 @@
- #define STRAPBUS_63268_FCVO_SHIFT     21
- #define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
-+#define MISC_IDDQ_CTRL_6328_REG               0x48
-+#define MISC_IDDQ_CTRL_63268_REG      0x4c
-+
-+#define IDDQ_CTRL_63268_USBH          (1 << 4)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -64,6 +64,26 @@ static void bcm_ub_hwclock_set(u32 mask,
-       bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
- }
-+static void bcm_misc_iddq_set(u32 mask, int enable)
-+{
-+      u32 offset;
-+      u32 reg;
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+              offset = MISC_IDDQ_CTRL_6328_REG;
-+      else if (BCMCPU_IS_63268())
-+              offset = MISC_IDDQ_CTRL_63268_REG;
-+      else
-+              return;
-+
-+      reg = bcm_misc_readl(offset);
-+      if (enable)
-+              reg &= ~mask;
-+      else
-+              reg |= mask;
-+      bcm_misc_writel(reg, offset);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -236,7 +256,17 @@ static void usbh_set(struct clk *clk, in
-       } else if (BCMCPU_IS_6368()) {
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-       } else if (BCMCPU_IS_63268()) {
-+              u32 reg;
-+
-               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-+              bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
-+              bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
-+              reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
-+              if (enable)
-+                      reg |= CLK_RST_CTL_USB_REF_CLK_EN;
-+              else
-+                      reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
-+              bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
-       } else {
-               return;
-       }
diff --git a/target/linux/bcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/bcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
deleted file mode 100644 (file)
index 41f48b9..0000000
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1034,11 +1034,18 @@
- #define USBH_PRIV_SETUP_6368_REG      0x28
- #define USBH_PRIV_SETUP_IOC_SHIFT     4
- #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_IPP_SHIFT     5
-+#define USBH_PRIV_SETUP_IPP_MASK      (1 << USBH_PRIV_SETUP_IPP_SHIFT)
- #define USBH_PRIV_SETUP_6318_REG      0x00
-+#define USBH_PRIV_PLL_CTRL1_6368_REG  0x18
- #define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
--#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
--#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
-+
-+#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN      (1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN   (1 << 31)
-+#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN  (1 << 9)
-+#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY (1 << 10)
-+
- #define USBH_PRIV_SIM_CTRL_6318_REG   0x20
- #define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -73,6 +73,8 @@ config BCM63XX_CPU_63268
-       bool "support 63268 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
-       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
--              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return 0;
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_63268()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
-       } else if (BCMCPU_IS_6318()) {
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_63268()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
-       } else if (BCMCPU_IS_6318()) {
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/bcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/bcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
deleted file mode 100644 (file)
index 35c2ef6..0000000
+++ /dev/null
@@ -1,108 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -40,6 +40,7 @@ struct board_info {
-       /* USB config */
-       struct bcm63xx_usbd_platform_data usbd;
-+      unsigned int num_usbh_ports:2;
-       /* GPIO LEDs */
-       struct gpio_led leds[5];
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_EHCI_H_
- #define BCM63XX_DEV_USB_EHCI_H_
--int bcm63xx_ehci_register(void);
-+int bcm63xx_ehci_register(unsigned int num_ports);
- #endif /* BCM63XX_DEV_USB_EHCI_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_OHCI_H_
- #define BCM63XX_DEV_USB_OHCI_H_
--int bcm63xx_ohci_register(void);
-+int bcm63xx_ohci_register(unsigned int num_ports);
- #endif /* BCM63XX_DEV_USB_OHCI_H_ */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -165,6 +165,8 @@ static struct platform_device bcm63xx_gp
-  */
- int __init board_register_devices(void)
- {
-+      int usbh_ports = 0;
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -186,14 +188,21 @@ int __init board_register_devices(void)
-           !board_get_mac_address(board.enetsw.mac_addr))
-               bcm63xx_enetsw_register(&board.enetsw);
-+      if ((board.has_ohci0 || board.has_ehci0)) {
-+              usbh_ports = board.num_usbh_ports;
-+
-+              if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
-+                      usbh_ports = 1;
-+      }
-+
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-       if (board.has_ehci0)
--              bcm63xx_ehci_register();
-+              bcm63xx_ehci_register(usbh_ports);
-       if (board.has_ohci0)
--              bcm63xx_ohci_register();
-+              bcm63xx_ohci_register(usbh_ports);
-       /* Generate MAC address for WLAN and register our SPROM,
-        * do this after registering enet devices
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
-       },
- };
--int __init bcm63xx_ehci_register(void)
-+int __init bcm63xx_ehci_register(unsigned int num_ports)
- {
-       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-               !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return 0;
-+      bcm63xx_ehci_pdata.num_ports = num_ports;       
-+
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-       ehci_resources[0].end = ehci_resources[0].start;
-       ehci_resources[0].end += RSET_EHCI_SIZE - 1;
---- a/arch/mips/bcm63xx/dev-usb-ohci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-       .no_big_frame_no        = 1,
--      .num_ports              = 1,
-       .power_on               = bcm63xx_ohci_power_on,
-       .power_off              = bcm63xx_ohci_power_off,
-       .power_suspend          = bcm63xx_ohci_power_off,
-@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
-       },
- };
--int __init bcm63xx_ohci_register(void)
-+int __init bcm63xx_ohci_register(unsigned int num_ports)
- {
-       if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-               return -ENODEV;
-+      bcm63xx_ohci_pdata.num_ports = num_ports;
-+
-       ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-       ohci_resources[0].end = ohci_resources[0].start;
-       ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/bcm63xx/patches-4.14/351-set-board-usbh-ports.patch b/target/linux/bcm63xx/patches-4.14/351-set-board-usbh-ports.patch
deleted file mode 100644 (file)
index 531adc9..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -576,6 +576,7 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-       .leds = {
-               {
diff --git a/target/linux/bcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch b/target/linux/bcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
deleted file mode 100644 (file)
index 37d3ff7..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From 0daf361ea799fba0af5a232036d0f06cea85ad24 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Jun 2014 12:47:49 +0200
-Subject: [PATCH 42/44] MIPS: BCM63XX: allow building support for more than one
- board type
-
-Use the arguments passed to the kernel to detect being booted with
-CFE as the indicator for bcm963xx board support, allowing the
-non presence of CFE_EPTSEAL to assume a different board type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig          |  7 +++----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +-
- arch/mips/bcm63xx/boards/board_common.c   | 13 +++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |  6 ++++++
- 4 files changed, 23 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -1,12 +1,11 @@
- # SPDX-License-Identifier: GPL-2.0
--choice
--      prompt "Board support"
-+menu "Board support"
-       depends on BCM63XX
--      default BOARD_BCM963XX
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
-       select SSB
-+      default y
-        help
--endchoice
-+endmenu
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -686,7 +686,7 @@ static const struct board_info __initcon
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
--void __init board_prom_init(void)
-+void __init board_bcm963xx_init(void)
- {
-       unsigned int i;
-       u8 *boot_addr, *cfe;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -13,6 +13,8 @@
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <asm/fw/cfe/cfe_api.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -30,6 +32,8 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include "board_common.h"
-+
- #define PFX   "board: "
- static struct board_info board;
-@@ -80,6 +84,15 @@ const char *board_get_name(void)
-       return board.name;
- }
-+void __init board_prom_init(void)
-+{
-+      /* detect bootloader */
-+      if (fw_arg3 == CFE_EPTSEAL)
-+              board_bcm963xx_init();
-+      else
-+              panic("unsupported bootloader detected");
-+}
-+
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
- /*
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -6,4 +6,10 @@
- void board_early_setup(const struct board_info *board,
-                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
-+#if defined(CONFIG_BOARD_BCM963XX)
-+void board_bcm963xx_init(void);
-+#else
-+static inline void board_bcm963xx_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/bcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
deleted file mode 100644 (file)
index 846f0b8..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:28:14 +0100
-Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
- flash address
-
-Allow board implementations to force the physmap address.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                         | 19 ++++++++++++++-----
- .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 2 files changed, 16 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -58,6 +58,12 @@ static struct platform_device mtd_dev =
-       },
- };
-+void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
-+{
-+      mtd_resources[0].start = start;
-+      mtd_resources[0].end = end;
-+}
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
-       u32 val;
-@@ -172,12 +178,15 @@ int __init bcm63xx_flash_register(void)
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
--              /* read base address of boot chip select (0) */
--              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
--              val &= MPI_CSBASE_BASE_MASK;
--              mtd_resources[0].start = val;
--              mtd_resources[0].end = 0x1FFFFFFF;
-+              if (!mtd_resources[0].start) {
-+                      /* read base address of boot chip select (0) */
-+                      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+                      val &= MPI_CSBASE_BASE_MASK;
-+
-+                      mtd_resources[0].start = val;
-+                      mtd_resources[0].end = 0x1FFFFFFF;
-+              }
-               return platform_device_register(&mtd_dev);
-       case BCM63XX_FLASH_TYPE_SERIAL:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -10,6 +10,8 @@ enum {
- void bcm63xx_flash_detect(void);
-+void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
-+
- int __init bcm63xx_flash_register(void);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch b/target/linux/bcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
deleted file mode 100644 (file)
index 886fb2d..0000000
+++ /dev/null
@@ -1,189 +0,0 @@
-From cc025e749a1fece61a6cc0d64bbe7b12472259cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:31:12 +0200
-Subject: [PATCH 01/10] MIPS: BCM63XX: move fallback sprom support into its own
- unit
-
-In preparation for enhancing it, move it into its own file. Require a
-mac address to be passed as the argument to always "reserve" the mac
-regardless of the inclusion state of SSB.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |  2 +-
- arch/mips/bcm63xx/boards/board_common.c            | 53 ++--------------
- arch/mips/bcm63xx/sprom.c                          | 70 ++++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  6 ++
- 4 files changed, 83 insertions(+), 48 deletions(-)
- create mode 100644 arch/mips/bcm63xx/sprom.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,8 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
-+                 sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -39,44 +39,6 @@
- static struct board_info board;
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--      .revision               = 0x02,
--      .board_rev              = 0x17,
--      .country_code           = 0x0,
--      .ant_available_bg       = 0x3,
--      .pa0b0                  = 0x15ae,
--      .pa0b1                  = 0xfa85,
--      .pa0b2                  = 0xfe8d,
--      .pa1b0                  = 0xffff,
--      .pa1b1                  = 0xffff,
--      .pa1b2                  = 0xffff,
--      .gpio0                  = 0xff,
--      .gpio1                  = 0xff,
--      .gpio2                  = 0xff,
--      .gpio3                  = 0xff,
--      .maxpwr_bg              = 0x004c,
--      .itssi_bg               = 0x00,
--      .boardflags_lo          = 0x2848,
--      .boardflags_hi          = 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--      if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--              return 0;
--      } else {
--              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
--              return -EINVAL;
--      }
--}
--#endif
--
--/*
-  * return board name for /proc/cpuinfo
-  */
- const char *board_get_name(void)
-@@ -179,6 +141,7 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
-+      u8 mac[ETH_ALEN];
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -220,15 +183,10 @@ int __init board_register_devices(void)
-       /* Generate MAC address for WLAN and register our SPROM,
-        * do this after registering enet devices
-        */
--#ifdef CONFIG_SSB_PCIHOST
--      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
--              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              if (ssb_arch_register_fallback_sprom(
--                              &bcm63xx_get_fallback_sprom) < 0)
--                      pr_err(PFX "failed to register fallback SPROM\n");
--      }
--#endif
-+
-+      if (board_get_mac_address(mac) ||
-+          bcm63xx_register_fallback_sprom(mac))
-+              pr_err(PFX "failed to register fallback SPROM\n");
-       bcm63xx_spi_register();
---- /dev/null
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -0,0 +1,70 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <bcm63xx_fallback_sprom.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "sprom: "
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+      .revision               = 0x02,
-+      .board_rev              = 0x17,
-+      .country_code           = 0x0,
-+      .ant_available_bg       = 0x3,
-+      .pa0b0                  = 0x15ae,
-+      .pa0b1                  = 0xfa85,
-+      .pa0b2                  = 0xfe8d,
-+      .pa1b0                  = 0xffff,
-+      .pa1b1                  = 0xffff,
-+      .pa1b2                  = 0xffff,
-+      .gpio0                  = 0xff,
-+      .gpio1                  = 0xff,
-+      .gpio2                  = 0xff,
-+      .gpio3                  = 0xff,
-+      .maxpwr_bg              = 0x004c,
-+      .itssi_bg               = 0x00,
-+      .boardflags_lo          = 0x2848,
-+      .boardflags_hi          = 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->bustype == SSB_BUSTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }
-+}
-+#endif
-+
-+int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+{
-+      int ret = 0;
-+
-+#ifdef CONFIG_SSB_PCIHOST
-+      memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+
-+      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
-+#endif
-+      return ret;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -0,0 +1,6 @@
-+#ifndef __BCM63XX_FALLBACK_SPROM
-+#define __BCM63XX_FALLBACK_SPROM
-+
-+int bcm63xx_register_fallback_sprom(u8 *mac);
-+
-+#endif
diff --git a/target/linux/bcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch b/target/linux/bcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
deleted file mode 100644 (file)
index d0e37ef..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From 9912a8b3c240a9b0af01ff496b7e8ed9e4cc5b82 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:43:49 +0200
-Subject: [PATCH 02/10] MIPS: BCM63XX: use platform data for the sprom
-
-Similar to ethernet setup, use a platform data struct for passing
-the mac. This eliminates the requirement to allocate an array on
-stack for the mac passed.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c                     | 6 ++----
- arch/mips/bcm63xx/sprom.c                                   | 8 ++++----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 +++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h         | 4 ++++
- 4 files changed, 17 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -141,7 +141,6 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
--      u8 mac[ETH_ALEN];
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -184,8 +183,8 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
--      if (board_get_mac_address(mac) ||
--          bcm63xx_register_fallback_sprom(mac))
-+      if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+          bcm63xx_register_fallback_sprom(&board.fallback_sprom))
-               pr_err(PFX "failed to register fallback SPROM\n");
-       bcm63xx_spi_register();
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,14 +55,14 @@ int bcm63xx_get_fallback_sprom(struct ss
- }
- #endif
--int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
-       int ret = 0;
- #ifdef CONFIG_SSB_PCIHOST
--      memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-       ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -1,6 +1,12 @@
- #ifndef __BCM63XX_FALLBACK_SPROM
- #define __BCM63XX_FALLBACK_SPROM
--int bcm63xx_register_fallback_sprom(u8 *mac);
-+#include <linux/if_ether.h>
-+
-+struct fallback_sprom_data {
-+      u8 mac_addr[ETH_ALEN];
-+};
-+
-+int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -7,6 +7,7 @@
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-+#include <bcm63xx_fallback_sprom.h>
- /*
-  * flash mapping
-@@ -50,6 +51,9 @@ struct board_info {
-       /* External PHY reset GPIO flags from gpio.h */
-       unsigned long ephy_reset_gpio_flags;
-+
-+      /* fallback sprom config */
-+      struct fallback_sprom_data fallback_sprom;
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch b/target/linux/bcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch
deleted file mode 100644 (file)
index f540eab..0000000
+++ /dev/null
@@ -1,140 +0,0 @@
-From 83131acbfb59760a19f3711c09526e191c8aad54 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:52:56 +0200
-Subject: [PATCH 03/10] MIPS: BCM63XX: make fallback sprom optional
-
-Some devices do not provide enough mac addresses to populate wifi in
-addition to ethernet.
-
-Use having pci enabled as a rough heuristic which boards should have it
-enabled.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           | 12 ++++++++++++
- arch/mips/bcm63xx/boards/board_common.c             |  5 +++--
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |  1 +
- 3 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -70,6 +70,7 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_pci                        = 1,
-       .has_usbd                       = 0,
-+      .use_fallback_sprom             = 1,
-       .usbd = {
-               .use_fullspeed          = 0,
-@@ -219,6 +220,7 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -264,6 +266,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -316,6 +319,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -370,6 +374,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -420,6 +425,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -443,6 +449,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -461,6 +468,7 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .has_ohci0                      = 1,
-       .has_enet0                      = 1,
-@@ -483,6 +491,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -509,6 +518,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -561,6 +571,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -632,6 +643,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -183,8 +183,9 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
--      if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
--          bcm63xx_register_fallback_sprom(&board.fallback_sprom))
-+      if (board.use_fallback_sprom &&
-+          (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+           bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
-               pr_err(PFX "failed to register fallback SPROM\n");
-       bcm63xx_spi_register();
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -33,6 +33,7 @@ struct board_info {
-       unsigned int    has_usbd:1;
-       unsigned int    has_uart0:1;
-       unsigned int    has_uart1:1;
-+      unsigned int    use_fallback_sprom:1;
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/bcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch b/target/linux/bcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch
deleted file mode 100644 (file)
index 0c4a9be..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From 1cece9f7aca1f0c193edce201f77a87008c5a405 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:58:38 +0200
-Subject: [PATCH 04/10] MIPS: BCM63XX: allow different types of sprom
-
-Different chips require different sprom contents, so prepare for
-supplying the appropriate sprom type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                                   | 13 ++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  5 +++++
- 2 files changed, 17 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -22,7 +22,7 @@
-  * bcm4318 WLAN work
-  */
- #ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
-+static __initconst struct ssb_sprom bcm63xx_default_sprom = {
-       .revision               = 0x02,
-       .board_rev              = 0x17,
-       .country_code           = 0x0,
-@@ -43,6 +43,8 @@ static struct ssb_sprom bcm63xx_sprom =
-       .boardflags_hi          = 0x0000,
- };
-+static struct ssb_sprom bcm63xx_sprom;
-+
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->bustype == SSB_BUSTYPE_PCI) {
-@@ -60,6 +62,15 @@ int __init bcm63xx_register_fallback_spr
-       int ret = 0;
- #ifdef CONFIG_SSB_PCIHOST
-+      switch (data->type) {
-+      case SPROM_DEFAULT:
-+              memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-+                     sizeof(bcm63xx_sprom));
-+              break;
-+      default:
-+              return -EINVAL;
-+      }
-+
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -3,8 +3,13 @@
- #include <linux/if_ether.h>
-+enum sprom_type {
-+      SPROM_DEFAULT, /* default fallback sprom */
-+};
-+
- struct fallback_sprom_data {
-       u8 mac_addr[ETH_ALEN];
-+      enum sprom_type type;
- };
- int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/bcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch b/target/linux/bcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch
deleted file mode 100644 (file)
index 42502eb..0000000
+++ /dev/null
@@ -1,517 +0,0 @@
-From cedee63bc73f8b7d45b8c0cba1236986812c1f83 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:16:36 +0200
-Subject: [PATCH 05/10] MIPS: BCM63XX: add support for "raw" sproms
-
-Allow using raw sprom content as templates.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c | 482 ++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 482 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,13 +55,492 @@ int bcm63xx_get_fallback_sprom(struct ss
-               return -EINVAL;
-       }
- }
-+
-+/* FIXME: use lib_sprom after submission upstream */
-+
-+/* Get the word-offset for a SSB_SPROM_XXX define. */
-+#define SPOFF(offset) ((offset) / sizeof(u16))
-+/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
-+#define SPEX16(_outvar, _offset, _mask, _shift)       \
-+      out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
-+#define SPEX32(_outvar, _offset, _mask, _shift)       \
-+      out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
-+                         in[SPOFF(_offset)]) & (_mask)) >> (_shift))
-+#define SPEX(_outvar, _offset, _mask, _shift) \
-+      SPEX16(_outvar, _offset, _mask, _shift)
-+
-+#define SPEX_ARRAY8(_field, _offset, _mask, _shift)   \
-+      do {    \
-+              SPEX(_field[0], _offset +  0, _mask, _shift);   \
-+              SPEX(_field[1], _offset +  2, _mask, _shift);   \
-+              SPEX(_field[2], _offset +  4, _mask, _shift);   \
-+              SPEX(_field[3], _offset +  6, _mask, _shift);   \
-+              SPEX(_field[4], _offset +  8, _mask, _shift);   \
-+              SPEX(_field[5], _offset + 10, _mask, _shift);   \
-+              SPEX(_field[6], _offset + 12, _mask, _shift);   \
-+              SPEX(_field[7], _offset + 14, _mask, _shift);   \
-+      } while (0)
-+
-+
-+static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in,
-+                             u16 mask, u16 shift)
-+{
-+      u16 v;
-+      u8 gain;
-+
-+      v = in[SPOFF(SSB_SPROM1_AGAIN)];
-+      gain = (v & mask) >> shift;
-+      if (gain == 0xFF)
-+              gain = 2; /* If unset use 2dBm */
-+      if (sprom_revision == 1) {
-+              /* Convert to Q5.2 */
-+              gain <<= 2;
-+      } else {
-+              /* Q5.2 Fractional part is stored in 0xC0 */
-+              gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
-+      }
-+
-+      return (s8)gain;
-+}
-+
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+      SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+      SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+      SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+      SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+      SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+      SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+      SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+      SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+      SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+      SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+           SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
-+static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
-+{
-+      u16 loc[3];
-+
-+      if (out->revision == 3)                 /* rev 3 moved MAC */
-+              loc[0] = SSB_SPROM3_IL0MAC;
-+      else {
-+              loc[0] = SSB_SPROM1_IL0MAC;
-+              loc[1] = SSB_SPROM1_ET0MAC;
-+              loc[2] = SSB_SPROM1_ET1MAC;
-+      }
-+
-+      SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
-+      SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
-+           SSB_SPROM1_ETHPHY_ET1A_SHIFT);
-+      SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
-+      SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
-+      SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
-+      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+      if (out->revision == 1)
-+              SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
-+                   SSB_SPROM1_BINF_CCODE_SHIFT);
-+      SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
-+           SSB_SPROM1_BINF_ANTA_SHIFT);
-+      SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
-+           SSB_SPROM1_BINF_ANTBG_SHIFT);
-+      SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
-+      SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
-+      SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
-+      SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
-+      SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
-+      SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
-+      SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
-+      SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
-+           SSB_SPROM1_GPIOA_P1_SHIFT);
-+      SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
-+      SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
-+           SSB_SPROM1_GPIOB_P3_SHIFT);
-+      SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
-+           SSB_SPROM1_MAXPWR_A_SHIFT);
-+      SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
-+      SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
-+           SSB_SPROM1_ITSSI_A_SHIFT);
-+      SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
-+      SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-+
-+      SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
-+      SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-+
-+      /* Extract the antenna gain values. */
-+      out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
-+                                                  SSB_SPROM1_AGAIN_BG,
-+                                                  SSB_SPROM1_AGAIN_BG_SHIFT);
-+      out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
-+                                                  SSB_SPROM1_AGAIN_A,
-+                                                  SSB_SPROM1_AGAIN_A_SHIFT);
-+      if (out->revision >= 2)
-+              sprom_extract_r23(out, in);
-+}
-+
-+/* Revs 4 5 and 8 have partially shared layout */
-+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
-+{
-+      SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
-+           SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
-+      SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
-+           SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
-+      SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
-+           SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
-+      SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
-+           SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
-+
-+      SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
-+           SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
-+      SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
-+           SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
-+      SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
-+           SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
-+      SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
-+           SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
-+
-+      SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
-+           SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
-+      SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
-+           SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
-+      SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
-+           SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
-+      SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
-+           SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
-+
-+      SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
-+           SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
-+      SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
-+           SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
-+      SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
-+           SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
-+      SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
-+           SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
-+}
-+
-+static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
-+{
-+      u16 il0mac_offset;
-+
-+      if (out->revision == 4)
-+              il0mac_offset = SSB_SPROM4_IL0MAC;
-+      else
-+              il0mac_offset = SSB_SPROM5_IL0MAC;
-+
-+      SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
-+      SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
-+           SSB_SPROM4_ETHPHY_ET1A_SHIFT);
-+      SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
-+      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+      if (out->revision == 4) {
-+              SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
-+              SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
-+              SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
-+              SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
-+              SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
-+              SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
-+      } else {
-+              SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
-+              SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
-+              SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
-+              SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
-+              SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
-+              SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
-+      }
-+      SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
-+           SSB_SPROM4_ANTAVAIL_A_SHIFT);
-+      SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
-+           SSB_SPROM4_ANTAVAIL_BG_SHIFT);
-+      SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
-+      SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
-+           SSB_SPROM4_ITSSI_BG_SHIFT);
-+      SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
-+      SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
-+           SSB_SPROM4_ITSSI_A_SHIFT);
-+      if (out->revision == 4) {
-+              SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
-+              SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
-+                   SSB_SPROM4_GPIOA_P1_SHIFT);
-+              SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
-+              SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
-+                   SSB_SPROM4_GPIOB_P3_SHIFT);
-+      } else {
-+              SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0);
-+              SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1,
-+                   SSB_SPROM5_GPIOA_P1_SHIFT);
-+              SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0);
-+              SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3,
-+                   SSB_SPROM5_GPIOB_P3_SHIFT);
-+      }
-+
-+      /* Extract the antenna gain values. */
-+      SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
-+           SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
-+      SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
-+           SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
-+      SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
-+           SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
-+      SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
-+           SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
-+
-+      sprom_extract_r458(out, in);
-+
-+      /* TODO - get remaining rev 4 stuff needed */
-+}
-+
-+static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
-+{
-+      int i;
-+      u16 o;
-+      u16 pwr_info_offset[] = {
-+              SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
-+              SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
-+      };
-+      BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
-+                      ARRAY_SIZE(out->core_pwr_info));
-+
-+      SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
-+      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+      SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
-+      SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
-+      SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
-+      SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
-+      SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
-+      SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
-+      SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
-+           SSB_SPROM8_ANTAVAIL_A_SHIFT);
-+      SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-+           SSB_SPROM8_ANTAVAIL_BG_SHIFT);
-+      SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
-+      SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
-+           SSB_SPROM8_ITSSI_BG_SHIFT);
-+      SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
-+      SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
-+           SSB_SPROM8_ITSSI_A_SHIFT);
-+      SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
-+      SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
-+           SSB_SPROM8_MAXP_AL_SHIFT);
-+      SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
-+      SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
-+           SSB_SPROM8_GPIOA_P1_SHIFT);
-+      SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
-+      SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
-+           SSB_SPROM8_GPIOB_P3_SHIFT);
-+      SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
-+      SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
-+           SSB_SPROM8_TRI5G_SHIFT);
-+      SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
-+      SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
-+           SSB_SPROM8_TRI5GH_SHIFT);
-+      SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
-+      SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
-+           SSB_SPROM8_RXPO5G_SHIFT);
-+      SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
-+      SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
-+           SSB_SPROM8_RSSISMC2G_SHIFT);
-+      SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
-+           SSB_SPROM8_RSSISAV2G_SHIFT);
-+      SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
-+           SSB_SPROM8_BXA2G_SHIFT);
-+      SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
-+      SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
-+           SSB_SPROM8_RSSISMC5G_SHIFT);
-+      SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
-+           SSB_SPROM8_RSSISAV5G_SHIFT);
-+      SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
-+           SSB_SPROM8_BXA5G_SHIFT);
-+      SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
-+      SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
-+      SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
-+      SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
-+      SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
-+      SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
-+      SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
-+      SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
-+      SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
-+      SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
-+      SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
-+      SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
-+      SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
-+      SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
-+      SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
-+      SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
-+      SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
-+
-+      /* Extract the antenna gain values. */
-+      SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
-+           SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
-+      SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
-+           SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
-+      SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
-+           SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
-+      SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
-+           SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
-+
-+      /* Extract cores power info info */
-+      for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
-+              o = pwr_info_offset[i];
-+              SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
-+                      SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
-+              SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
-+                      SSB_SPROM8_2G_MAXP, 0);
-+
-+              SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
-+
-+              SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
-+                      SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
-+              SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
-+                      SSB_SPROM8_5G_MAXP, 0);
-+              SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
-+                      SSB_SPROM8_5GH_MAXP, 0);
-+              SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
-+                      SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
-+
-+              SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
-+      }
-+
-+      /* Extract FEM info */
-+      SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
-+      SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
-+      SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
-+      SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
-+      SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-+
-+      SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
-+      SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
-+      SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
-+      SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
-+      SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-+
-+      SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
-+           SSB_SPROM8_LEDDC_ON_SHIFT);
-+      SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
-+           SSB_SPROM8_LEDDC_OFF_SHIFT);
-+
-+      SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
-+           SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
-+      SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
-+           SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
-+      SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
-+           SSB_SPROM8_TXRXC_SWITCH_SHIFT);
-+
-+      SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
-+
-+      SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
-+      SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
-+      SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
-+      SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
-+
-+      SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
-+           SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
-+      SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
-+           SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
-+      SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
-+           SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
-+           SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
-+      SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
-+           SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
-+      SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
-+           SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
-+           SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
-+      SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
-+           SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
-+           SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
-+      SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
-+           SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
-+           SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
-+      SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
-+           SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
-+
-+      SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
-+      SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
-+      SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
-+      SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
-+
-+      SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
-+           SSB_SPROM8_THERMAL_TRESH_SHIFT);
-+      SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
-+           SSB_SPROM8_THERMAL_OFFSET_SHIFT);
-+      SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
-+           SSB_SPROM8_TEMPDELTA_PHYCAL,
-+           SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
-+      SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
-+           SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
-+      SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
-+           SSB_SPROM8_TEMPDELTA_HYSTERESIS,
-+           SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
-+      sprom_extract_r458(out, in);
-+
-+      /* TODO - get remaining rev 8 stuff needed */
-+}
-+
-+static int sprom_extract(struct ssb_sprom *out, const u16 *in, u16 size)
-+{
-+      memset(out, 0, sizeof(*out));
-+
-+      out->revision = in[size - 1] & 0x00FF;
-+      memset(out->et0mac, 0xFF, 6);           /* preset et0 and et1 mac */
-+      memset(out->et1mac, 0xFF, 6);
-+
-+      switch (out->revision) {
-+      case 1:
-+      case 2:
-+      case 3:
-+              sprom_extract_r123(out, in);
-+              break;
-+      case 4:
-+      case 5:
-+              sprom_extract_r45(out, in);
-+              break;
-+      case 8:
-+              sprom_extract_r8(out, in);
-+              break;
-+      default:
-+              pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
-+                       out->revision);
-+              out->revision = 1;
-+              sprom_extract_r123(out, in);
-+      }
-+
-+      if (out->boardflags_lo == 0xFFFF)
-+              out->boardflags_lo = 0;  /* per specs */
-+      if (out->boardflags_hi == 0xFFFF)
-+              out->boardflags_hi = 0;  /* per specs */
-+
-+      return 0;
-+}
-+
-+static __initdata u16 template_sprom[220];
- #endif
-+
- int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
-       int ret = 0;
- #ifdef CONFIG_SSB_PCIHOST
-+      u16 size = 0;
-+
-       switch (data->type) {
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-@@ -71,6 +550,9 @@ int __init bcm63xx_register_fallback_spr
-               return -EINVAL;
-       }
-+      if (size > 0)
-+              sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
diff --git a/target/linux/bcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch b/target/linux/bcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch
deleted file mode 100644 (file)
index 65c00b5..0000000
+++ /dev/null
@@ -1,181 +0,0 @@
-From 7be5bb46003295c9e04fd4e795593b2deaacd783 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:33:38 +0200
-Subject: [PATCH 06/10] MIPS: BCM63XX: add raw fallback sproms for most common
- ssb cards
-
-Add template sproms for BCM4306, BCM4318, BCM4321, BCM4322, and BCM43222.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 136 +++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   6 +
- 2 files changed, 142 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -43,6 +43,122 @@ static __initconst struct ssb_sprom bcm6
-       .boardflags_hi          = 0x0000,
- };
-+
-+static __initconst u16 bcm4306_sprom[] = {
-+      0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
-+      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3034, 0x14d4,
-+      0xfa91, 0xfe60, 0xffff, 0xffff, 0x004c, 0xffff, 0xffff, 0xffff,
-+      0x003e, 0x0a49, 0xff02, 0x0000, 0xff10, 0xffff, 0xffff, 0x0002,
-+};
-+
-+static __initconst u16 bcm4318_sprom[] = {
-+      0x2001, 0x0000, 0x0449, 0x14e4, 0x4318, 0x8000, 0x0002, 0x0000,
-+      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3046, 0x15a7,
-+      0xfab0, 0xfe97, 0xffff, 0xffff, 0x0048, 0xffff, 0xffff, 0xffff,
-+      0x003e, 0xea49, 0xff02, 0x0000, 0xff08, 0xffff, 0xffff, 0x0002,
-+};
-+
-+static __initconst u16 bcm4321_sprom[] = {
-+      0x3001, 0x0000, 0x046c, 0x14e4, 0x4328, 0x8000, 0x0002, 0x0000,
-+      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x0032, 0x4a01, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x2728, 0x5b5b, 0x222b, 0x5b5b, 0x1927, 0x5b5b, 0x1e36,
-+      0x5b5b, 0x303c, 0x3030, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x3e4c, 0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0x3e4c,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0008, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0004,
-+};
-+
-+static __initconst u16 bcm4322_sprom[] = {
-+      0x3001, 0x0000, 0x04bc, 0x14e4, 0x432c, 0x8000, 0x0002, 0x0000,
-+      0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x1209, 0x0200, 0x0000, 0x0400, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0301,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x2048, 0xfe9a, 0x1571, 0xfabd, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x2048, 0xfeb9, 0x159f, 0xfadd, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x3333, 0x5555, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43222_sprom[] = {
-+      0x2001, 0x0000, 0x04d4, 0x14e4, 0x4351, 0x8000, 0x0002, 0x0000,
-+      0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x2305, 0x0200, 0x0000, 0x2400, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204c, 0xfea6, 0x1717, 0xfa6d, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204c, 0xfeb8, 0x167c, 0xfa9e, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x3333, 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
- static struct ssb_sprom bcm63xx_sprom;
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-@@ -542,6 +658,26 @@ int __init bcm63xx_register_fallback_spr
-       u16 size = 0;
-       switch (data->type) {
-+      case SPROM_BCM4306:
-+              memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
-+              size = ARRAY_SIZE(bcm4306_sprom);
-+              break;
-+      case SPROM_BCM4318:
-+              memcpy(&template_sprom, &bcm4318_sprom, sizeof(bcm4318_sprom));
-+              size = ARRAY_SIZE(bcm4318_sprom);
-+              break;
-+      case SPROM_BCM4321:
-+              memcpy(&template_sprom, &bcm4321_sprom, sizeof(bcm4321_sprom));
-+              size = ARRAY_SIZE(bcm4321_sprom);
-+              break;
-+      case SPROM_BCM4322:
-+              memcpy(&template_sprom, &bcm4322_sprom, sizeof(bcm4322_sprom));
-+              size = ARRAY_SIZE(bcm4322_sprom);
-+              break;
-+      case SPROM_BCM43222:
-+              memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
-+              size = ARRAY_SIZE(bcm43222_sprom);
-+              break;
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-                      sizeof(bcm63xx_sprom));
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -5,6 +5,12 @@
- enum sprom_type {
-       SPROM_DEFAULT, /* default fallback sprom */
-+      /* SSB based */
-+      SPROM_BCM4306,
-+      SPROM_BCM4318,
-+      SPROM_BCM4321,
-+      SPROM_BCM4322,
-+      SPROM_BCM43222,
- };
- struct fallback_sprom_data {
diff --git a/target/linux/bcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch b/target/linux/bcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch
deleted file mode 100644 (file)
index 416aa9d..0000000
+++ /dev/null
@@ -1,128 +0,0 @@
-From 03feb9db77fba3eef3d83e17a87a56979659b248 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:48:26 +0200
-Subject: [PATCH 07/10] MIPS: BCM63XX: also register a fallback sprom for bcma
-
-Similar to SSB, register a fallback sprom handler for BCMA.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig |  1 +
- arch/mips/bcm63xx/sprom.c        | 40 +++++++++++++++++++++++++++++++++++-----
- 2 files changed, 36 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -5,6 +5,7 @@ menu "Board support"
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
-       select SSB
-+      select BCMA
-       default y
-        help
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -12,6 +12,7 @@
- #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/bcma/bcma.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <board_bcm963xx.h>
-@@ -21,7 +22,7 @@
-  * Register a sane SPROMv2 to make the on-board
-  * bcm4318 WLAN work
-  */
--#ifdef CONFIG_SSB_PCIHOST
-+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
- static __initconst struct ssb_sprom bcm63xx_default_sprom = {
-       .revision               = 0x02,
-       .board_rev              = 0x17,
-@@ -43,7 +44,7 @@ static __initconst struct ssb_sprom bcm6
-       .boardflags_hi          = 0x0000,
- };
--
-+#if defined (CONFIG_SSB_PCIHOST)
- static __initconst u16 bcm4306_sprom[] = {
-       0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
-       0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-@@ -158,10 +159,12 @@ static __initconst u16 bcm43222_sprom[]
-       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-       0xffff, 0xffff, 0xffff, 0x0008,
- };
-+#endif /* CONFIG_SSB_PCIHOST */
- static struct ssb_sprom bcm63xx_sprom;
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+#if defined(CONFIG_SSB_PCIHOST)
-+int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->bustype == SSB_BUSTYPE_PCI) {
-               memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-@@ -171,6 +174,20 @@ int bcm63xx_get_fallback_sprom(struct ss
-               return -EINVAL;
-       }
- }
-+#endif
-+
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }
-+}
-+#endif
- /* FIXME: use lib_sprom after submission upstream */
-@@ -654,10 +671,11 @@ int __init bcm63xx_register_fallback_spr
- {
-       int ret = 0;
--#ifdef CONFIG_SSB_PCIHOST
-+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
-       u16 size = 0;
-       switch (data->type) {
-+#if defined(CONFIG_SSB_PCIHOST)
-       case SPROM_BCM4306:
-               memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
-               size = ARRAY_SIZE(bcm4306_sprom);
-@@ -678,6 +696,7 @@ int __init bcm63xx_register_fallback_spr
-               memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
-               size = ARRAY_SIZE(bcm43222_sprom);
-               break;
-+#endif
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-                      sizeof(bcm63xx_sprom));
-@@ -692,8 +711,19 @@ int __init bcm63xx_register_fallback_spr
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-+#endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
-+
-+#if defined(CONFIG_SSB_PCIHOST)
-+      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_ssb_sprom);
-+      if (ret)
-+              return ret;
-+
-+#endif
--      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+      ret = bcma_arch_register_fallback_sprom(bcm63xx_get_fallback_bcma_sprom);
-+      if (ret)
-+              return ret;
- #endif
-       return ret;
- }
diff --git a/target/linux/bcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch b/target/linux/bcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch
deleted file mode 100644 (file)
index 5c0abb9..0000000
+++ /dev/null
@@ -1,303 +0,0 @@
-From 27bf70e3fe797691b17df07ecbfaf9f5a4419f49 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 30 Jul 2014 23:14:27 +0200
-Subject: [PATCH 08/10] MIPS: BCM63XX: add BCMA based sprom templates
-
-Add fallback sproms for BCM4313, BCM43131, BCM43217, BCM43225, BCM43227,
-BCM43228, and BCM4331.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 256 +++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   8 +
- 2 files changed, 264 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -161,6 +161,226 @@ static __initconst u16 bcm43222_sprom[]
- };
- #endif /* CONFIG_SSB_PCIHOST */
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+static __initconst u16 bcm4313_sprom[] = {
-+      0x2801, 0x0000, 0x0510, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x4727, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1215, 0x2a00, 0x0800, 0x0800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+      0xffff, 0x0011, 0x007a, 0x0000, 0x0000, 0x0000, 0x0000, 0x0201,
-+      0x0000, 0x7800, 0x7c0a, 0x0398, 0x0008, 0x0000, 0x0000, 0x0000,
-+      0x0044, 0x1684, 0xfd0d, 0xff35, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0048, 0xfed2, 0x15d9, 0xfac6, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0008,
-+};
-+
-+static __initconst u16 bcm43131_sprom[] = {
-+      0x2801, 0x0000, 0x05f7, 0x14e4, 0x0070, 0xedbe, 0x1c00, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x43aa, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1280, 0x0200, 0x0000, 0x8800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0002, 0x0202,
-+      0xffff, 0x0022, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43217_sprom[] = {
-+      0x2801, 0x0000, 0x05e9, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x43a9, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1252, 0x0200, 0x0000, 0x9800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x7a08,
-+};
-+
-+static __initconst u16 bcm43225_sprom[] = {
-+      0x2801, 0x0000, 0x04da, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0x1008, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x4357, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x1200, 0x0200, 0x0000, 0x1000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x88ff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+      0xffff, 0x7800, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204e, 0xfead, 0x1611, 0xfa9a, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204e, 0xfec1, 0x1674, 0xfab2, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x5555, 0x5555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555,
-+      0x7555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0002, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43227_sprom[] = {
-+      0x2801, 0x0000, 0x0543, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x4358, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1402, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xff36, 0x16d2, 0xfaae, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfeca, 0x159b, 0xfa80, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43228_sprom[] = {
-+      0x2801, 0x0000, 0x0011, 0x1028, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x4359, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1203, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0215,
-+      0x0215, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xff73, 0x1762, 0xfaa4, 0x3e34, 0x3434, 0xfea1, 0x154c,
-+      0xfad0, 0xfea1, 0x144c, 0xfafb, 0xfe7b, 0x13fe, 0xfafc, 0x0000,
-+      0x204c, 0xff41, 0x16a3, 0xfa8f, 0x3e34, 0x3434, 0xfe97, 0x1446,
-+      0xfb05, 0xfe97, 0x1346, 0xfb32, 0xfeb9, 0x1516, 0xfaee, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x8888, 0x8888, 0x8888,
-+      0x8888, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xf008,
-+};
-+
-+static __initconst u16 bcm4331_sprom[] = {
-+      0x2801, 0x0000, 0x0525, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0x1010, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x4331, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x1104, 0x0200, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0x88ff, 0xffff, 0x0707, 0x0202,
-+      0xff02, 0x0077, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+      0x0325, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x2048, 0xfe56, 0x16f2, 0xfa44, 0x3e3c, 0x3c3c, 0xfe77, 0x1657,
-+      0xfa75, 0xffff, 0xffff, 0xffff, 0xfe76, 0x15da, 0xfa85, 0x0000,
-+      0x2048, 0xfe5c, 0x16b5, 0xfa56, 0x3e3c, 0x3c3c, 0xfe7c, 0x169d,
-+      0xfa6b, 0xffff, 0xffff, 0xffff, 0xfe7a, 0x1597, 0xfa97, 0x0000,
-+      0x2048, 0xfe68, 0x1734, 0xfa46, 0x3e3c, 0x3c3c, 0xfe7f, 0x15e4,
-+      0xfa94, 0xffff, 0xffff, 0xffff, 0xfe7d, 0x1582, 0xfa9f, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0009,
-+};
-+
-+#endif  /* CONFIG_BCMA_HOST_PCI */
-+
- static struct ssb_sprom bcm63xx_sprom;
- #if defined(CONFIG_SSB_PCIHOST)
-@@ -697,6 +917,42 @@ int __init bcm63xx_register_fallback_spr
-               size = ARRAY_SIZE(bcm43222_sprom);
-               break;
- #endif
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+      case SPROM_BCM4313:
-+              memcpy(&template_sprom, &bcm4313_sprom,
-+                       sizeof(bcm4313_sprom));
-+              size = ARRAY_SIZE(bcm4313_sprom);
-+              break;
-+      case SPROM_BCM43131:
-+              memcpy(&template_sprom, &bcm43131_sprom,
-+                     sizeof(bcm43131_sprom));
-+              size = ARRAY_SIZE(bcm43131_sprom);
-+              break;
-+      case SPROM_BCM43217:
-+              memcpy(&template_sprom, &bcm43217_sprom,
-+                     sizeof(bcm43217_sprom));
-+              size = ARRAY_SIZE(bcm43217_sprom);
-+              break;
-+      case SPROM_BCM43225:
-+              memcpy(&template_sprom, &bcm43225_sprom,
-+                     sizeof(bcm43225_sprom));
-+              size = ARRAY_SIZE(bcm43225_sprom);
-+              break;
-+      case SPROM_BCM43227:
-+              memcpy(&template_sprom, &bcm43227_sprom,
-+                     sizeof(bcm43227_sprom));
-+              size = ARRAY_SIZE(bcm43227_sprom);
-+              break;
-+      case SPROM_BCM43228:
-+              memcpy(&template_sprom, &bcm43228_sprom,
-+                     sizeof(bcm43228_sprom));
-+              size = ARRAY_SIZE(bcm43228_sprom);
-+              break;
-+      case SPROM_BCM4331:
-+              memcpy(&template_sprom, &bcm4331_sprom, sizeof(&bcm4331_sprom));
-+              size = ARRAY_SIZE(bcm4331_sprom);
-+              break;
-+#endif
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-                      sizeof(bcm63xx_sprom));
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -11,6 +11,14 @@ enum sprom_type {
-       SPROM_BCM4321,
-       SPROM_BCM4322,
-       SPROM_BCM43222,
-+      /* BCMA based */
-+      SPROM_BCM4313,
-+      SPROM_BCM43131,
-+      SPROM_BCM43217,
-+      SPROM_BCM43225,
-+      SPROM_BCM43227,
-+      SPROM_BCM43228,
-+      SPROM_BCM4331,
- };
- struct fallback_sprom_data {
diff --git a/target/linux/bcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch b/target/linux/bcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch
deleted file mode 100644 (file)
index 74c2846..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-From 8575548b08e33c9ff4fd540abec09dd177e33682 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 31 Jul 2014 19:12:33 +0200
-Subject: [PATCH 09/10] MIPS: BCM63XX: allow board files to provide sprom
- fixups
-
-Allow board_info files to supply fixups for the base sproms to adapt
-them to the actual used sprom contents in case they do not use the
-default ones.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                                  | 14 +++++++++++++-
- .../mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  8 ++++++++
- 2 files changed, 21 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -883,6 +883,14 @@ static int sprom_extract(struct ssb_spro
-       return 0;
- }
-+void sprom_apply_fixups(u16 *sprom, struct sprom_fixup *fixups, int n)
-+{
-+      unsigned int i;
-+
-+      for (i = 0; i < n; i++)
-+              sprom[fixups[i].offset] = fixups[i].value;
-+}
-+
- static __initdata u16 template_sprom[220];
- #endif
-@@ -961,8 +969,12 @@ int __init bcm63xx_register_fallback_spr
-               return -EINVAL;
-       }
--      if (size > 0)
-+      if (size > 0) {
-+              sprom_apply_fixups(template_sprom, data->board_fixups,
-+                                 data->num_board_fixups);
-+
-               sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+      }
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -21,9 +21,17 @@ enum sprom_type {
-       SPROM_BCM4331,
- };
-+struct sprom_fixup {
-+      u16 offset;
-+      u16 value;
-+};
-+
- struct fallback_sprom_data {
-       u8 mac_addr[ETH_ALEN];
-       enum sprom_type type;
-+
-+      struct sprom_fixup *board_fixups;
-+      unsigned int num_board_fixups;
- };
- int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/bcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch b/target/linux/bcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch
deleted file mode 100644 (file)
index 40591e5..0000000
+++ /dev/null
@@ -1,102 +0,0 @@
-From f393eaacf178e7e8a61eb11a96edd7dfb35cb49d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 31 Jul 2014 20:39:44 +0200
-Subject: [PATCH 10/10] MIPS: BCM63XX: allow setting a pci bus/device for
- fallback sprom
-
-Warn if the set pci bus/slot does not match the actual request.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 31 ++++++++++++++++++----
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  3 +++
- 2 files changed, 29 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -381,13 +381,25 @@ static __initconst u16 bcm4331_sprom[] =
- #endif  /* CONFIG_BCMA_HOST_PCI */
--static struct ssb_sprom bcm63xx_sprom;
-+struct fallback_sprom_match {
-+      u8 pci_bus;
-+      u8 pci_dev;
-+      struct ssb_sprom sprom;
-+};
-+
-+static struct fallback_sprom_match fallback_sprom;
- #if defined(CONFIG_SSB_PCIHOST)
- int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
-+                  PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
-+                      pr_warn("ssb_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+                              fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+                              bus->host_pci->bus->number,
-+                              PCI_SLOT(bus->host_pci->devfn));
-+              memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-               return 0;
-       } else {
-               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-@@ -400,7 +412,13 @@ int bcm63xx_get_fallback_ssb_sprom(struc
- int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
-+                  PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
-+                      pr_warn("bcma_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+                              fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+                              bus->host_pci->bus->number,
-+                              PCI_SLOT(bus->host_pci->devfn));
-+              memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-               return 0;
-       } else {
-               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-@@ -962,8 +980,8 @@ int __init bcm63xx_register_fallback_spr
-               break;
- #endif
-       case SPROM_DEFAULT:
--              memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
--                     sizeof(bcm63xx_sprom));
-+              memcpy(&fallback_sprom.sprom, &bcm63xx_default_sprom,
-+                     sizeof(bcm63xx_default_sprom));
-               break;
-       default:
-               return -EINVAL;
-@@ -973,12 +991,15 @@ int __init bcm63xx_register_fallback_spr
-               sprom_apply_fixups(template_sprom, data->board_fixups,
-                                  data->num_board_fixups);
--              sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+              sprom_extract(&fallback_sprom.sprom, template_sprom, size);
-       }
--      memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-+      memcpy(fallback_sprom.sprom.il0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(fallback_sprom.sprom.et0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(fallback_sprom.sprom.et1mac, data->mac_addr, ETH_ALEN);
-+
-+      fallback_sprom.pci_bus = data->pci_bus;
-+      fallback_sprom.pci_dev = data->pci_dev;
- #endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
- #if defined(CONFIG_SSB_PCIHOST)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -30,6 +30,9 @@ struct fallback_sprom_data {
-       u8 mac_addr[ETH_ALEN];
-       enum sprom_type type;
-+      u8 pci_bus;
-+      u8 pci_dev;
-+
-       struct sprom_fixup *board_fixups;
-       unsigned int num_board_fixups;
- };
diff --git a/target/linux/bcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch b/target/linux/bcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch
deleted file mode 100644 (file)
index a491816..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-From 26546e5499d98616322fb3472b977e2e86603f3a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 24 Jun 2014 10:57:51 +0200
-Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig        |    4 ++++
- arch/mips/bcm63xx/boards/board_common.c |   34 +++++++++++++++++++++++++++++++
- arch/mips/bcm63xx/prom.c                |    6 ++++++
- 3 files changed, 44 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -2,6 +2,10 @@
- menu "Board support"
-       depends on BCM63XX
-+config BOARD_BCM63XX_DT
-+      bool "Device Tree boards (experimential)"
-+      select USE_OF
-+
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
-       select SSB
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -10,11 +10,14 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/of_fdt.h>
-+#include <linux/of_platform.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <asm/bootinfo.h>
- #include <asm/fw/cfe/cfe_api.h>
-+#include <asm/prom.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -125,8 +128,23 @@ void __init board_setup(void)
-       /* make sure we're running on expected cpu */
-       if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-               panic("unexpected CPU for bcm963xx board");
-+
-+#if CONFIG_OF
-+      if (initial_boot_params)
-+              __dt_setup_arch(initial_boot_params);
-+#endif
- }
-+#if CONFIG_OF
-+void __init device_tree_init(void)
-+{
-+      if (!initial_boot_params)
-+              return;
-+
-+      unflatten_and_copy_device_tree();
-+}
-+#endif
-+
- static struct gpio_led_platform_data bcm63xx_led_data;
- static struct platform_device bcm63xx_gpio_leds = {
-@@ -135,6 +153,13 @@ static struct platform_device bcm63xx_gp
-       .dev.platform_data      = &bcm63xx_led_data,
- };
-+#if CONFIG_OF
-+static struct of_device_id of_ids[] = {
-+      { /* filled at runtime */ },
-+      { .compatible = "simple-bus" },
-+      { },
-+};
-+#endif
- /*
-  * third stage init callback, register all board devices.
-  */
-@@ -142,6 +167,15 @@ int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
-+#if CONFIG_OF
-+      if (of_have_populated_dt()) {
-+              snprintf(of_ids[0].compatible, sizeof(of_ids[0].compatible),
-+                       "brcm,bcm%x", bcm63xx_get_cpu_id());
-+
-+              of_platform_populate(NULL, of_ids, NULL, NULL);
-+      }
-+#endif
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -8,6 +8,7 @@
- #include <linux/init.h>
- #include <linux/bootmem.h>
-+#include <linux/of_fdt.h>
- #include <linux/smp.h>
- #include <asm/bootinfo.h>
- #include <asm/bmips.h>
-@@ -23,6 +24,11 @@ void __init prom_init(void)
- {
-       u32 reg, mask;
-+#if CONFIG_OF
-+      if (fw_passed_dtb)
-+              early_init_dt_verify((void *)fw_passed_dtb);
-+#endif
-+
-       bcm63xx_cpu_init();
-       /* stop any running watchdog */
diff --git a/target/linux/bcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch b/target/linux/bcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch
deleted file mode 100644 (file)
index 7069c23..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From 25bf2b5836c892f091651d8a3384c9c57ce1b400 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 26 Jun 2014 12:51:00 +0200
-Subject: [PATCH 46/48] MIPS: BCM63XX: add support for matching the board_info
- by dtb
-
-Allow using the passed dtb's compatible property to match board_info
-structs instead of nvram's boardname field, which is not unique anyway.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   15 +++++++++++++++
- arch/mips/bcm63xx/boards/board_common.c   |   18 ++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |    3 +++
- 3 files changed, 36 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -695,6 +695,10 @@ static const struct board_info __initcon
- #endif
- };
-+static struct of_device_id const bcm963xx_boards_dt[] = {
-+      { },
-+};
-+
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
-@@ -706,6 +710,7 @@ void __init board_bcm963xx_init(void)
-       char *board_name = NULL;
-       u32 val;
-       struct bcm_hcs *hcs;
-+      const struct of_device_id *board_match;
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-@@ -745,6 +750,16 @@ void __init board_bcm963xx_init(void)
-       } else {
-               board_name = bcm63xx_nvram_get_name();
-       }
-+
-+      /* find board by compat */
-+      board_match = bcm63xx_match_board(bcm963xx_boards_dt);
-+      if (board_match) {
-+              board_early_setup(board_match->data,
-+                                bcm63xx_nvram_get_mac_address);
-+
-+              return;
-+      }
-+
-       /* find board by name */
-       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -239,3 +239,21 @@ int __init board_register_devices(void)
-       return 0;
- }
-+
-+const struct of_device_id * __init bcm63xx_match_board(const struct of_device_id *m)
-+{
-+      const struct of_device_id *match;
-+      unsigned long dt_root;
-+
-+      if (!IS_ENABLED(CONFIG_OF) || !initial_boot_params)
-+              return NULL;
-+
-+      dt_root = of_get_flat_dt_root();
-+
-+      for (match = m; match->compatible[0]; match++) {
-+              if (of_flat_dt_is_compatible(dt_root, match->compatible))
-+                      return match;
-+      }
-+
-+      return NULL;
-+}
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -1,11 +1,14 @@
- #ifndef __BOARD_COMMON_H
- #define __BOARD_COMMON_H
-+#include <linux/of.h>
- #include <board_bcm963xx.h>
- void board_early_setup(const struct board_info *board,
-                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
-+const struct of_device_id *bcm63xx_match_board(const struct of_device_id *);
-+
- #if defined(CONFIG_BOARD_BCM963XX)
- void board_bcm963xx_init(void);
- #else
diff --git a/target/linux/bcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch b/target/linux/bcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch
deleted file mode 100644 (file)
index 5dd4cba..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From e71eea9953c774dfadb754258824fb1888c279f4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 21 Nov 2014 16:54:06 +0100
-Subject: [PATCH 47/48] MIPS: BCM63XX: populate the compatible to board_info
- list
-
-Populate the compatible to board_info list to allow dtbs to be used
-for known boards.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   34 +++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -696,6 +696,48 @@ static const struct board_info __initcon
- };
- static struct of_device_id const bcm963xx_boards_dt[] = {
-+#ifdef CONFIG_OF
-+#ifdef CONFIG_BCM63XX_CPU_3368
-+      { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6338
-+      { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-+      { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6345
-+      { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+      { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
-+      { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
-+      { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-+      { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-+      { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-+      { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-+      { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-+      { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+      { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-+      { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6358
-+      { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-+      { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-+      { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+      { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+      { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-+      { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-+      { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
-+      { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+#endif
-+#endif /* CONFIG_OF */
-       { },
- };
diff --git a/target/linux/bcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch b/target/linux/bcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch
deleted file mode 100644 (file)
index 026eff3..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -143,6 +143,18 @@ void __init device_tree_init(void)
-       unflatten_and_copy_device_tree();
- }
-+
-+int board_of_device_present(const char *alias)
-+{
-+      bool present;
-+      struct device_node *np;
-+
-+      np = of_find_node_by_path(alias);
-+      present = of_device_is_available(np);
-+      of_node_put(np);
-+
-+      return present;
-+}
- #endif
- static struct gpio_led_platform_data bcm63xx_led_data;
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -15,4 +15,13 @@ void board_bcm963xx_init(void);
- static inline void board_bcm963xx_init(void) { }
- #endif
-+#if defined(CONFIG_OF)
-+int board_of_device_present(const char *alias);
-+#else
-+static inline void board_of_device_present(const char *alias)
-+{
-+      return 0;
-+}
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch b/target/linux/bcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch
deleted file mode 100644 (file)
index 25384eb..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -23,6 +23,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-+#include "boards/board_common.h"
-+
- static int flash_type;
- static struct mtd_partition mtd_partitions[] = {
-@@ -178,6 +180,9 @@ int __init bcm63xx_flash_register(void)
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
-+              /* don't register when already registered through from dtb */
-+              if (board_of_device_present("pflash"))
-+                      return 0;
-               if (!mtd_resources[0].start) {
-                       /* read base address of boot chip select (0) */
diff --git a/target/linux/bcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch b/target/linux/bcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch
deleted file mode 100644 (file)
index c5041a9..0000000
+++ /dev/null
@@ -1,45 +0,0 @@
-From 8a0803979163c647736cb234ee1620c049c4915c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 1 Dec 2014 00:20:07 +0100
-Subject: [PATCH 5/5] MIPS: BCM63XX: register interrupt controllers through DT
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -14,6 +14,8 @@
- #include <linux/irqchip.h>
- #include <linux/irqchip/irq-bcm6345-ext.h>
- #include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/of.h>
-+#include <linux/of_fdt.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -21,6 +23,9 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
-+IRQCHIP_DECLARE(mips_cpu_intc, "mti,cpu-interrupt-controller",
-+           mips_cpu_irq_of_init);
-+
- void __init arch_init_irq(void)
- {
-       void __iomem *periph_bases[2];
-@@ -29,6 +34,13 @@ void __init arch_init_irq(void)
-       int periph_irqs[2] = { 2, 3 };
-       int ext_irqs[6];
-+#ifdef CONFIG_OF
-+      if (initial_boot_params) {
-+              irqchip_init();
-+              return;
-+      }
-+#endif
-+
-       periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-       periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-       ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
diff --git a/target/linux/bcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/bcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
deleted file mode 100644 (file)
index e0fa439..0000000
+++ /dev/null
@@ -1,178 +0,0 @@
-From dbe94a8daaa63ef81b7414f2a17bca8e36dd6daa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 20 Feb 2015 19:55:32 +0100
-Subject: [PATCH 1/6] gpio: add a simple GPIO driver for bcm63xx
-
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/gpio/Kconfig        |    8 +++
- drivers/gpio/Makefile       |    1 +
- drivers/gpio/gpio-bcm63xx.c |  135 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 131 insertions(+)
- create mode 100644 drivers/gpio/gpio-bcm63xx.c
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -134,6 +134,13 @@ config GPIO_BCM_KONA
-       help
-         Turn on GPIO support for Broadcom "Kona" chips.
-+config GPIO_BCM63XX
-+      bool "Broadcom BCM63XX GPIO"
-+      depends on MIPS || COMPILE_TEST
-+      select GPIO_GENERIC
-+      help
-+        Turn on GPIO support for Broadcom BCM63XX xDSL chips.
-+
- config GPIO_BRCMSTB
-       tristate "BRCMSTB GPIO support"
-       default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_ATH79)     += gpio-ath79.o
- obj-$(CONFIG_GPIO_ASPEED)     += gpio-aspeed.o
- obj-$(CONFIG_GPIO_AXP209)     += gpio-axp209.o
- obj-$(CONFIG_GPIO_BCM_KONA)   += gpio-bcm-kona.o
-+obj-$(CONFIG_GPIO_BCM63XX)    += gpio-bcm63xx.o
- obj-$(CONFIG_GPIO_BD9571MWV)  += gpio-bd9571mwv.o
- obj-$(CONFIG_GPIO_BRCMSTB)    += gpio-brcmstb.o
- obj-$(CONFIG_GPIO_BT8XX)      += gpio-bt8xx.o
---- /dev/null
-+++ b/drivers/gpio/gpio-bcm63xx.c
-@@ -0,0 +1,135 @@
-+/*
-+ * Driver for BCM63XX memory-mapped GPIO controllers, based on
-+ * Generic driver for memory-mapped GPIO controllers.
-+ *
-+ * Copyright 2008 MontaVista Software, Inc.
-+ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
-+ * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/err.h>
-+#include <linux/bug.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/compiler.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/log2.h>
-+#include <linux/ioport.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_gpio.h>
-+
-+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+      char irq_name[7]; /* "gpioXX" */
-+
-+      sprintf(irq_name, "gpio%d", gpio);
-+      return of_irq_get_byname(chip->of_node, irq_name);
-+}
-+
-+static int bcm63xx_gpio_probe(struct platform_device *pdev)
-+{
-+      struct device *dev = &pdev->dev;
-+      struct resource *dat_r, *dirout_r;
-+      void __iomem *dat;
-+      void __iomem *dirout;
-+      unsigned long sz;
-+      int err;
-+      struct gpio_chip *gc;
-+      struct bgpio_pdata *pdata = dev_get_platdata(dev);
-+
-+      dirout_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      dat_r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+      if (!dat_r || !dirout_r)
-+              return -EINVAL;
-+
-+      if (resource_size(dat_r) != resource_size(dirout_r))
-+              return -EINVAL;
-+
-+      sz = resource_size(dat_r);
-+
-+      dat = devm_ioremap_resource(dev, dat_r);
-+      if (IS_ERR(dat))
-+              return PTR_ERR(dat);
-+
-+      dirout = devm_ioremap_resource(dev, dirout_r);
-+      if (IS_ERR(dirout))
-+              return PTR_ERR(dirout);
-+
-+      gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
-+      if (!gc)
-+              return -ENOMEM;
-+
-+      err = bgpio_init(gc, dev, sz, dat, NULL, NULL, dirout, NULL,
-+                       BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+      if (err)
-+              return err;
-+
-+      platform_set_drvdata(pdev, gc);
-+
-+      if (dev->of_node) {
-+              int id = of_alias_get_id(dev->of_node, "gpio");
-+              u32 ngpios;
-+
-+              if (id >= 0)
-+                      gc->label = devm_kasprintf(dev, GFP_KERNEL,
-+                                                 "bcm63xx-gpio.%d", id);
-+
-+              if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
-+                      gc->ngpio = ngpios;
-+
-+              if (of_get_property(dev->of_node, "interrupt-names", NULL))
-+                      gc->to_irq = bcm63xx_gpio_to_irq;
-+
-+      } else if (pdata) {
-+              gc->base = pdata->base;
-+              if (pdata->ngpio > 0)
-+                      gc->ngpio = pdata->ngpio;
-+      }
-+
-+      return gpiochip_add(gc);
-+}
-+
-+static int bcm63xx_gpio_remove(struct platform_device *pdev)
-+{
-+      struct gpio_chip *gc = platform_get_drvdata(pdev);
-+
-+      gpiochip_remove(gc);
-+      return 0;
-+}
-+
-+#ifdef CONFIG_OF
-+static struct of_device_id bcm63xx_gpio_of_match[] = {
-+      { .compatible = "brcm,bcm6345-gpio" },
-+      { },
-+};
-+#endif
-+
-+static struct platform_driver bcm63xx_gpio_driver = {
-+      .probe = bcm63xx_gpio_probe,
-+      .remove = bcm63xx_gpio_remove,
-+      .driver = {
-+              .name = "bcm63xx-gpio",
-+              .of_match_table = of_match_ptr(bcm63xx_gpio_of_match),
-+      },
-+};
-+
-+module_platform_driver(bcm63xx_gpio_driver);
-+
-+MODULE_DESCRIPTION("Driver for BCM63XX memory-mapped GPIO controllers");
-+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/bcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch b/target/linux/bcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
deleted file mode 100644 (file)
index fe56da0..0000000
+++ /dev/null
@@ -1,215 +0,0 @@
-From 302f69453721e5ee19f583339a3a646821d4a173 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 20 Feb 2015 23:58:54 +0100
-Subject: [PATCH 2/6] MIPS: BCM63XX: switch to new gpio driver
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c |    2 +
- arch/mips/bcm63xx/gpio.c  | 145 ++++++++++------------------------------------
- arch/mips/bcm63xx/setup.c |   3 -
- 3 files changed, 32 insertions(+), 118 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -188,6 +188,8 @@ int __init board_register_devices(void)
-       }
- #endif
-+      bcm63xx_gpio_init();
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -5,147 +5,62 @@
-  *
-  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
-  */
- #include <linux/kernel.h>
- #include <linux/init.h>
--#include <linux/spinlock.h>
- #include <linux/platform_device.h>
- #include <linux/gpio/driver.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_gpio.h>
--#include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
--static u32 gpio_out_low_reg;
--
--static void bcm63xx_gpio_out_low_reg_init(void)
-+static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
- {
--      switch (bcm63xx_get_cpu_id()) {
--      case BCM6345_CPU_ID:
--              gpio_out_low_reg = GPIO_DATA_LO_REG_6345;
--              break;
--      default:
--              gpio_out_low_reg = GPIO_DATA_LO_REG;
--              break;
--      }
--}
--
--static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
--static u32 gpio_out_low, gpio_out_high;
-+      struct resource res[2];
-+      struct bgpio_pdata pdata;
--static void bcm63xx_gpio_set(struct gpio_chip *chip,
--                           unsigned gpio, int val)
--{
--      u32 reg;
--      u32 mask;
--      u32 *v;
--      unsigned long flags;
--
--      if (gpio >= chip->ngpio)
--              BUG();
--
--      if (gpio < 32) {
--              reg = gpio_out_low_reg;
--              mask = 1 << gpio;
--              v = &gpio_out_low;
--      } else {
--              reg = GPIO_DATA_HI_REG;
--              mask = 1 << (gpio - 32);
--              v = &gpio_out_high;
--      }
--
--      spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
--      if (val)
--              *v |= mask;
--      else
--              *v &= ~mask;
--      bcm_gpio_writel(*v, reg);
--      spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
--}
-+      memset(res, 0, sizeof(res));
-+      memset(&pdata, 0, sizeof(pdata));
--static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
--{
--      u32 reg;
--      u32 mask;
-+      res[0].flags = IORESOURCE_MEM;
-+      res[0].start = bcm63xx_regset_address(RSET_GPIO);
-+      res[0].start += dir;
--      if (gpio >= chip->ngpio)
--              BUG();
-+      res[0].end = res[0].start + 3;
--      if (gpio < 32) {
--              reg = gpio_out_low_reg;
--              mask = 1 << gpio;
--      } else {
--              reg = GPIO_DATA_HI_REG;
--              mask = 1 << (gpio - 32);
--      }
-+      res[1].flags = IORESOURCE_MEM;
-+      res[1].start = bcm63xx_regset_address(RSET_GPIO);
-+      res[1].start += data;
--      return !!(bcm_gpio_readl(reg) & mask);
--}
-+      res[1].end = res[1].start + 3;
--static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
--                                    unsigned gpio, int dir)
--{
--      u32 reg;
--      u32 mask;
--      u32 tmp;
--      unsigned long flags;
--
--      if (gpio >= chip->ngpio)
--              BUG();
--
--      if (gpio < 32) {
--              reg = GPIO_CTL_LO_REG;
--              mask = 1 << gpio;
--      } else {
--              reg = GPIO_CTL_HI_REG;
--              mask = 1 << (gpio - 32);
--      }
--
--      spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
--      tmp = bcm_gpio_readl(reg);
--      if (dir == BCM63XX_GPIO_DIR_IN)
--              tmp &= ~mask;
--      else
--              tmp |= mask;
--      bcm_gpio_writel(tmp, reg);
--      spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
-+      pdata.base = id * 32;
-+      pdata.ngpio = ngpio;
--      return 0;
-+      platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
-+                                        &pdata, sizeof(pdata));
- }
--static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-+int __init bcm63xx_gpio_init(void)
- {
--      return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
--}
-+      int ngpio = bcm63xx_gpio_count();
-+      int data_low_reg;
--static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
--                                       unsigned gpio, int value)
--{
--      bcm63xx_gpio_set(chip, gpio, value);
--      return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
--}
-+      if (BCMCPU_IS_6345())
-+              data_low_reg = GPIO_DATA_LO_REG_6345;
-+      else
-+              data_low_reg = GPIO_DATA_LO_REG;
-+      bcm63xx_gpio_init_one(0, GPIO_CTL_LO_REG, data_low_reg, min(ngpio, 32));
--static struct gpio_chip bcm63xx_gpio_chip = {
--      .label                  = "bcm63xx-gpio",
--      .direction_input        = bcm63xx_gpio_direction_input,
--      .direction_output       = bcm63xx_gpio_direction_output,
--      .get                    = bcm63xx_gpio_get,
--      .set                    = bcm63xx_gpio_set,
--      .base                   = 0,
--};
-+      if (ngpio <= 32)
-+              return 0;
--int __init bcm63xx_gpio_init(void)
--{
--      bcm63xx_gpio_out_low_reg_init();
-+      bcm63xx_gpio_init_one(1, GPIO_CTL_HI_REG, GPIO_DATA_HI_REG, ngpio - 32);
--      gpio_out_low = bcm_gpio_readl(gpio_out_low_reg);
--      if (!BCMCPU_IS_6345())
--              gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
--      bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
--      pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
-+      return 0;
--      return gpiochip_add_data(&bcm63xx_gpio_chip, NULL);
- }
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -164,9 +164,6 @@ void __init plat_mem_setup(void)
- int __init bcm63xx_register_devices(void)
- {
--      /* register gpiochip */
--      bcm63xx_gpio_init();
--
-       return board_register_devices();
- }
diff --git a/target/linux/bcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/bcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
deleted file mode 100644 (file)
index c061ec4..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-From d13bdf92ec885105cf107183f8464c40e5f3b93b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 17:21:59 +0100
-Subject: [PATCH 4/6] MIPS: BCM63XX: register lookup for ephy-reset gpio
-
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    2 +-
- arch/mips/bcm63xx/boards/board_common.c            |    7 +++--
- arch/mips/bcm63xx/gpio.c                           |   32 ++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h  |    2 ++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    5 +--
- 5 files changed, 42 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -55,7 +55,7 @@ static struct board_info __initdata boar
-       },
-       .ephy_reset_gpio                = 36,
--      .ephy_reset_gpio_flags          = GPIOF_INIT_HIGH,
-+      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
- };
- #endif
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -247,9 +247,10 @@ int __init board_register_devices(void)
-       platform_device_register(&bcm63xx_gpio_leds);
--      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--              gpio_request_one(board.ephy_reset_gpio,
--                              board.ephy_reset_gpio_flags, "ephy-reset");
-+      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) {
-+              bcm63xx_gpio_ephy_reset(board.ephy_reset_gpio,
-+                                      board.ephy_reset_gpio_flags);
-+      }
-       return 0;
- }
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -8,15 +8,23 @@
-  * Copyright (C) Jonas Gorski <jogo@openwrt.org>
-  */
-+#include <asm/addrspace.h>
-+
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/gpio/driver.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_regs.h>
-+static const char * const gpio_chip_labels[] = {
-+      "bcm63xx-gpio.0",
-+      "bcm63xx-gpio.1",
-+};
-+
- static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
- {
-       struct resource res[2];
-@@ -64,3 +72,25 @@ int __init bcm63xx_gpio_init(void)
-       return 0;
- }
-+
-+static struct gpiod_lookup_table ephy_reset = {
-+      .dev_id = "bcm63xx_enet-0",
-+      .table = {
-+              { /* filled at runtime */ },
-+              { },
-+      },
-+};
-+
-+
-+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags)
-+{
-+      if (ephy_reset.table[0].chip_label)
-+              return;
-+
-+      ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32];
-+      ephy_reset.table[0].chip_hwnum = hw_gpio % 32;
-+      ephy_reset.table[0].con_id = "reset";
-+      ephy_reset.table[0].flags = flags;
-+
-+      gpiod_add_lookup_table(&ephy_reset);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -3,9 +3,11 @@
- #define BCM63XX_GPIO_H
- #include <linux/init.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cpu.h>
- int __init bcm63xx_gpio_init(void);
-+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -4,6 +4,7 @@
- #include <linux/types.h>
- #include <linux/gpio.h>
-+#include <linux/gpio/machine.h>
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -50,8 +51,8 @@ struct board_info {
-       /* External PHY reset GPIO */
-       unsigned int ephy_reset_gpio;
--      /* External PHY reset GPIO flags from gpio.h */
--      unsigned long ephy_reset_gpio_flags;
-+      /* External PHY reset GPIO flags from gpio/machine.h */
-+      enum gpio_lookup_flags ephy_reset_gpio_flags;
-       /* fallback sprom config */
-       struct fallback_sprom_data fallback_sprom;
diff --git a/target/linux/bcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch b/target/linux/bcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch
deleted file mode 100644 (file)
index 6eb1bd0..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-From e55892aac9d5508a000647ca66f0e678e02be3bb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 17:26:50 +0100
-Subject: [PATCH 5/6] MIPS: BCM63XX: do not register gpio-controller if
-present in dtb
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/gpio.c |   7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -20,6 +20,8 @@
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_regs.h>
-+#include "boards/board_common.h"
-+
- static const char * const gpio_chip_labels[] = {
-       "bcm63xx-gpio.0",
-       "bcm63xx-gpio.1",
-@@ -48,8 +50,10 @@ static void __init bcm63xx_gpio_init_one
-       pdata.base = id * 32;
-       pdata.ngpio = ngpio;
--      platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
--                                        &pdata, sizeof(pdata));
-+      if (!board_of_device_present("gpio0") &&
-+          !board_of_device_present("pinctrl"))
-+              platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res,
-+                                                2, &pdata, sizeof(pdata));
- }
- int __init bcm63xx_gpio_init(void)
diff --git a/target/linux/bcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch b/target/linux/bcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch
deleted file mode 100644 (file)
index b571999..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-From 1647cccc871bf43876c3df9852869680880d054c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 25 Mar 2015 13:52:02 +0100
-Subject: [PATCH 1/2] MIPS: BCM63XX: provide a gpio lookup for the pcmcia
- ready gpio
-
-To prepare for a time when gpiobases don't need to be fixed anymore.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-pcmcia.c |   13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-pcmcia.c
-+++ b/arch/mips/bcm63xx/dev-pcmcia.c
-@@ -10,6 +10,7 @@
- #include <linux/kernel.h>
- #include <asm/bootinfo.h>
- #include <linux/platform_device.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cs.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_pcmcia.h>
-@@ -101,6 +102,14 @@ static const struct {
-       },
- };
-+static struct gpiod_lookup_table pcmcia_gpios_table = {
-+      .dev_id = "bcm63xx_pcmcia.0",
-+      .table = {
-+              GPIO_LOOKUP("bcm63xx-gpio.0", 0, "ready", GPIO_ACTIVE_HIGH),
-+              { },
-+      },
-+};
-+
- int __init bcm63xx_pcmcia_register(void)
- {
-       int ret, i;
-@@ -112,16 +121,20 @@ int __init bcm63xx_pcmcia_register(void)
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6348_CPU_ID:
-               pd.ready_gpio = 22;
-+              pcmcia_gpios_table.table[0].chip_hwnum = 22;
-               break;
-       case BCM6358_CPU_ID:
-               pd.ready_gpio = 18;
-+              pcmcia_gpios_table.table[0].chip_hwnum = 18;
-               break;
-       default:
-               return -ENODEV;
-       }
-+      gpiod_add_lookup_table(&pcmcia_gpios_table);
-+
-       pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
-       pcmcia_resources[0].end = pcmcia_resources[0].start +
-               RSET_PCMCIA_SIZE - 1;
diff --git a/target/linux/bcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch b/target/linux/bcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch
deleted file mode 100644 (file)
index 2534171..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-From c4e04f1c54928a49b227a5420d38b18226838775 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 25 Mar 2015 13:54:56 +0100
-Subject: [PATCH 2/2] pcmcia: bcm63xx_pmcia: use the new named gpio
-
-Use the new named gpio instead of relying on the hardware gpio numbers
-matching the virtual gpio numbers.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/pcmcia/bcm63xx_pcmcia.c |    9 ++++++++-
- drivers/pcmcia/bcm63xx_pcmcia.h |    4 ++++
- 2 files changed, 12 insertions(+), 1 deletion(-)
-
---- a/drivers/pcmcia/bcm63xx_pcmcia.c
-+++ b/drivers/pcmcia/bcm63xx_pcmcia.c
-@@ -237,7 +237,7 @@ static unsigned int __get_socket_status(
-               stat |= SS_XVCARD;
-       stat |= SS_POWERON;
--      if (gpio_get_value(skt->pd->ready_gpio))
-+      if (gpiod_get_value(skt->ready_gpio))
-               stat |= SS_READY;
-       return stat;
-@@ -373,6 +373,13 @@ static int bcm63xx_drv_pcmcia_probe(stru
-               goto err;
-       }
-+      /* get ready gpio */
-+      skt->ready_gpio = devm_gpiod_get(&pdev->dev, "ready", GPIOD_IN);
-+      if (IS_ERR(skt->ready_gpio)) {
-+              ret = PTR_ERR(skt->ready_gpio);
-+              goto err;
-+      }
-+
-       /* resources are static */
-       sock->resource_ops = &pccard_static_ops;
-       sock->ops = &bcm63xx_pcmcia_operations;
---- a/drivers/pcmcia/bcm63xx_pcmcia.h
-+++ b/drivers/pcmcia/bcm63xx_pcmcia.h
-@@ -4,6 +4,7 @@
- #include <linux/types.h>
- #include <linux/timer.h>
-+#include <linux/gpio/consumer.h>
- #include <pcmcia/ss.h>
- #include <bcm63xx_dev_pcmcia.h>
-@@ -56,6 +57,9 @@ struct bcm63xx_pcmcia_socket {
-       /* base address of io memory */
-       void __iomem *io_base;
-+
-+      /* ready gpio */
-+      struct gpio_desc *ready_gpio;
- };
- #endif /* BCM63XX_PCMCIA_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 5d4265f..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From 8439e5d2e69f54a532bb5f8ec001b4b5a3035574 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:38:05 +0200
-Subject: [PATCH 14/16] Documentation: add BCM6318 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6318 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6318-pinctrl.txt      | 79 ++++++++++++++++++++++
- 1 file changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
-@@ -0,0 +1,79 @@
-+* Broadcom BCM6318 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6318-pinctrl".
-+- regs: Register specifiers of dirout, dat, mode, mux, and pad registers.
-+- reg-names: Must be "dirout", "dat", "mode", "mux", "pad".
-+- gpio-controller: Identifies this node as a gpio controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6318-pinctrl";
-+      reg = <0x10000080 0x08>,
-+            <0x10000088 0x08>,
-+            <0x10000098 0x04>,
-+            <0x1000009c 0x0c>,
-+            <0x100000d4 0x18>;
-+      reg-names = "dirout", "dat", "mode", "mux", "pad";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+gpio0         0       led, ephy0_spd_led
-+gpio1         1       led, ephy1_spd_led
-+gpio2         2       led, ephy2_spd_led
-+gpio3         3       led, ephy3_spd_led
-+gpio4         4       led, ephy0_act_led
-+gpio5         5       led, ephy1_act_led
-+gpio6         6       led, ephy2_act_led, serial_led_data
-+gpio7         7       led, ephy3_act_led, serial_led_clk
-+gpio8         8       led, inet_act_led
-+gpio9         9       led, inet_fail_led
-+gpio10                10      led, dsl_led
-+gpio11                11      led, post_fail_led
-+gpio12                12      led, wlan_wps_led
-+gpio13                13      led, usb_pwron, usb_device_led
-+gpio14                14      led
-+gpio15                15      led
-+gpio16                16      led
-+gpio17                17      led
-+gpio18                18      led
-+gpio19                19      led
-+gpio20                20      led
-+gpio21                21      led
-+gpio22                22      led
-+gpio23                23      led
-+gpio24                24      -
-+gpio25                25      -
-+gpio26                26      -
-+gpio27                27      -
-+gpio28                28      -
-+gpio29                29      -
-+gpio30                30      -
-+gpio31                31      -
-+gpio32                32      -
-+gpio33                33      -
-+gpio34                34      -
-+gpio35                35      -
-+gpio36                36      -
-+gpio37                37      -
-+gpio38                38      -
-+gpio39                39      -
-+gpio40                40      usb_active
-+gpio41                41      -
-+gpio42                42      -
-+gpio43                43      -
-+gpio44                44      -
-+gpio45                45      -
-+gpio46                46      -
-+gpio47                47      -
-+gpio48                48      -
-+gpio49                49      -
diff --git a/target/linux/bcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch
deleted file mode 100644 (file)
index 2a89dde..0000000
+++ /dev/null
@@ -1,609 +0,0 @@
-From bd9c250ef85e6f99aa5d59b21abb87d0a48f2f61 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:20:39 +0200
-Subject: [PATCH 15/16] pinctrl: add a pincontrol driver for BCM6318
-
-Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
-to different functions. BCM6318 is similar to BCM6328 with the addition
-of a pad register, and the GPIO meaning of the mux register changes
-based on the GPIO number.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c | 564 ++++++++++++++++++++++++++++++
- 3 files changed, 572 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -2,6 +2,13 @@ config PINCTRL_BCM63XX
-       bool
-       select GPIO_GENERIC
-+config PINCTRL_BCM6318
-+      bool "BCM6318 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
-+
- config PINCTRL_BCM6328
-       bool "BCM6328 pincontrol driver" if COMPILE_TEST
-       select PINMUX
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,4 +1,5 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
-+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
-@@ -0,0 +1,564 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6318_NGPIO         50
-+
-+struct bcm6318_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6318_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      unsigned mode_val:1;
-+      unsigned mux_val:2;
-+};
-+
-+struct bcm6318_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+      void __iomem *mux[3];
-+      void __iomem *pad[6];
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+static const struct pinctrl_pin_desc bcm6318_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      PINCTRL_PIN(8, "gpio8"),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      PINCTRL_PIN(12, "gpio12"),
-+      PINCTRL_PIN(13, "gpio13"),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      PINCTRL_PIN(27, "gpio27"),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      PINCTRL_PIN(30, "gpio30"),
-+      PINCTRL_PIN(31, "gpio31"),
-+      PINCTRL_PIN(32, "gpio32"),
-+      PINCTRL_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+      PINCTRL_PIN(40, "gpio40"),
-+      PINCTRL_PIN(41, "gpio41"),
-+      PINCTRL_PIN(42, "gpio42"),
-+      PINCTRL_PIN(43, "gpio43"),
-+      PINCTRL_PIN(44, "gpio44"),
-+      PINCTRL_PIN(45, "gpio45"),
-+      PINCTRL_PIN(46, "gpio46"),
-+      PINCTRL_PIN(47, "gpio47"),
-+      PINCTRL_PIN(48, "gpio48"),
-+      PINCTRL_PIN(49, "gpio49"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+static unsigned gpio48_pins[] = { 48 };
-+static unsigned gpio49_pins[] = { 49 };
-+
-+#define BCM6318_GROUP(n)                                      \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+      }
-+
-+static struct bcm6318_pingroup bcm6318_groups[] = {
-+      BCM6318_GROUP(gpio0),
-+      BCM6318_GROUP(gpio1),
-+      BCM6318_GROUP(gpio2),
-+      BCM6318_GROUP(gpio3),
-+      BCM6318_GROUP(gpio4),
-+      BCM6318_GROUP(gpio5),
-+      BCM6318_GROUP(gpio6),
-+      BCM6318_GROUP(gpio7),
-+      BCM6318_GROUP(gpio8),
-+      BCM6318_GROUP(gpio9),
-+      BCM6318_GROUP(gpio10),
-+      BCM6318_GROUP(gpio11),
-+      BCM6318_GROUP(gpio12),
-+      BCM6318_GROUP(gpio13),
-+      BCM6318_GROUP(gpio14),
-+      BCM6318_GROUP(gpio15),
-+      BCM6318_GROUP(gpio16),
-+      BCM6318_GROUP(gpio17),
-+      BCM6318_GROUP(gpio18),
-+      BCM6318_GROUP(gpio19),
-+      BCM6318_GROUP(gpio20),
-+      BCM6318_GROUP(gpio21),
-+      BCM6318_GROUP(gpio22),
-+      BCM6318_GROUP(gpio23),
-+      BCM6318_GROUP(gpio24),
-+      BCM6318_GROUP(gpio25),
-+      BCM6318_GROUP(gpio26),
-+      BCM6318_GROUP(gpio27),
-+      BCM6318_GROUP(gpio28),
-+      BCM6318_GROUP(gpio29),
-+      BCM6318_GROUP(gpio30),
-+      BCM6318_GROUP(gpio31),
-+      BCM6318_GROUP(gpio32),
-+      BCM6318_GROUP(gpio33),
-+      BCM6318_GROUP(gpio34),
-+      BCM6318_GROUP(gpio35),
-+      BCM6318_GROUP(gpio36),
-+      BCM6318_GROUP(gpio37),
-+      BCM6318_GROUP(gpio38),
-+      BCM6318_GROUP(gpio39),
-+      BCM6318_GROUP(gpio40),
-+      BCM6318_GROUP(gpio41),
-+      BCM6318_GROUP(gpio42),
-+      BCM6318_GROUP(gpio43),
-+      BCM6318_GROUP(gpio44),
-+      BCM6318_GROUP(gpio45),
-+      BCM6318_GROUP(gpio46),
-+      BCM6318_GROUP(gpio47),
-+      BCM6318_GROUP(gpio48),
-+      BCM6318_GROUP(gpio49),
-+};
-+
-+/* GPIO_MODE */
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+/* PINMUX_SEL */
-+static const char * const ephy0_spd_led_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const ephy1_spd_led_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const ephy2_spd_led_groups[] = {
-+      "gpio2",
-+};
-+
-+static const char * const ephy3_spd_led_groups[] = {
-+      "gpio3",
-+};
-+
-+static const char * const ephy0_act_led_groups[] = {
-+      "gpio4",
-+};
-+
-+static const char * const ephy1_act_led_groups[] = {
-+      "gpio5",
-+};
-+
-+static const char * const ephy2_act_led_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const ephy3_act_led_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const inet_act_led_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const inet_fail_led_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const dsl_led_groups[] = {
-+      "gpio10",
-+};
-+
-+static const char * const post_fail_led_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const wlan_wps_led_groups[] = {
-+      "gpio12",
-+};
-+
-+static const char * const usb_pwron_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const usb_active_groups[] = {
-+      "gpio40",
-+};
-+
-+#define BCM6318_MODE_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mode_val = 1,                          \
-+      }
-+
-+#define BCM6318_MUX_FUN(n, mux)                               \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mux_val = mux,                         \
-+      }
-+
-+static const struct bcm6318_function bcm6318_funcs[] = {
-+      BCM6318_MODE_FUN(led),
-+      BCM6318_MUX_FUN(ephy0_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy1_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy2_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy3_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy0_act_led, 1),
-+      BCM6318_MUX_FUN(ephy1_act_led, 1),
-+      BCM6318_MUX_FUN(ephy2_act_led, 1),
-+      BCM6318_MUX_FUN(ephy3_act_led, 1),
-+      BCM6318_MUX_FUN(serial_led_data, 3),
-+      BCM6318_MUX_FUN(serial_led_clk, 3),
-+      BCM6318_MUX_FUN(inet_act_led, 1),
-+      BCM6318_MUX_FUN(inet_fail_led, 1),
-+      BCM6318_MUX_FUN(dsl_led, 1),
-+      BCM6318_MUX_FUN(post_fail_led, 1),
-+      BCM6318_MUX_FUN(wlan_wps_led, 1),
-+      BCM6318_MUX_FUN(usb_pwron, 1),
-+      BCM6318_MUX_FUN(usb_device_led, 2),
-+      BCM6318_MUX_FUN(usb_active, 2),
-+};
-+
-+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6318_groups);
-+}
-+
-+static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6318_groups[group].name;
-+}
-+
-+static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6318_groups[group].pins;
-+      *num_pins = bcm6318_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6318_funcs);
-+}
-+
-+static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6318_funcs[selector].name;
-+}
-+
-+static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6318_funcs[selector].groups;
-+      *num_groups = bcm6318_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6318_rmw_mux(struct bcm6318_pinctrl *pctl, unsigned pin,
-+                          u32 mode, u32 mux)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      if (pin < 32) {
-+              reg = __raw_readl(pctl->mode);
-+              reg &= ~BIT(pin);
-+              if (mode)
-+                      reg |= BIT(pin);
-+              __raw_writel(reg, pctl->mode);
-+      }
-+
-+      if (pin < 48) {
-+              reg = __raw_readl(pctl->mux[pin / 16]);
-+              reg &= ~(3UL << ((pin % 16) * 2));
-+              reg |= mux << ((pin % 16) * 2);
-+              __raw_writel(reg, pctl->mux[pin / 16]);
-+      }
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm6318_set_pad(struct bcm6318_pinctrl *pctl, unsigned pin, u8 val)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      reg = __raw_readl(pctl->pad[pin / 8]);
-+      reg &= ~(0xfUL << ((pin % 8) * 4));
-+      reg |= val << ((pin % 8) * 4);
-+      __raw_writel(reg, pctl->pad[pin / 8]);
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6318_pingroup *grp = &bcm6318_groups[group];
-+      const struct bcm6318_function *f = &bcm6318_funcs[selector];
-+
-+      bcm6318_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
-+
-+      return 0;
-+}
-+
-+static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      if (offset < 13) {
-+              /* GPIOs 0-12 use mux 0 as GPIO function */
-+              bcm6318_rmw_mux(pctl, offset, 0, 0);
-+      } else if (offset < 42) {
-+              /* GPIOs 13-41 use mux 3 as GPIO function */
-+              bcm6318_rmw_mux(pctl, offset, 0, 3);
-+
-+              /* FIXME: revert to old value for non gpio? */
-+              bcm6318_set_pad(pctl, offset, 0);
-+      } else {
-+              /* no idea, really */
-+      }
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6318_pctl_ops = {
-+      .get_groups_count       = bcm6318_pinctrl_get_group_count,
-+      .get_group_name         = bcm6318_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6318_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6318_pmx_ops = {
-+      .get_functions_count    = bcm6318_pinctrl_get_func_count,
-+      .get_function_name      = bcm6318_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6318_pinctrl_get_groups,
-+      .set_mux                = bcm6318_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6318_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6318_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6318_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode, *mux, *pad;
-+      unsigned i;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
-+      mux = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mux))
-+              return PTR_ERR(mux);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pad");
-+      pad = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(pad))
-+              return PTR_ERR(pad);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+
-+      for (i = 0; i < 3; i++)
-+              pctl->mux[i] = mux + (i * 4);
-+
-+      for (i = 0; i < 6; i++)
-+              pctl->pad[i] = pad + (i * 4);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6318_pctl_ops;
-+      pctl->desc.pmxops = &bcm6318_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6318_pins);
-+      pctl->desc.pins = bcm6318_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6318_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6318_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6318-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6318_pinctrl_driver = {
-+      .probe = bcm6318_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6318-pinctrl",
-+              .of_match_table = bcm6318_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6318_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch b/target/linux/bcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch
deleted file mode 100644 (file)
index 67c8cee..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -25,6 +25,8 @@ config BCM63XX_CPU_6318
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6318
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-@@ -32,6 +34,8 @@ config BCM63XX_CPU_6328
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6328
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -47,6 +51,8 @@ config BCM63XX_CPU_6348
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6348
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-@@ -54,6 +60,8 @@ config BCM63XX_CPU_6358
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6358
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-@@ -61,6 +69,8 @@ config BCM63XX_CPU_6362
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6362
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-@@ -68,6 +78,8 @@ config BCM63XX_CPU_6368
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6368
- config BCM63XX_CPU_63268
-       bool "support 63268 CPU"
-@@ -75,6 +87,8 @@ config BCM63XX_CPU_63268
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM63268
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch b/target/linux/bcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch
deleted file mode 100644 (file)
index fe4dbe3..0000000
+++ /dev/null
@@ -1,105 +0,0 @@
-From cad8f63047c0691e8185d3c9c6a2705b83310c9c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 31 Jul 2017 20:10:36 +0200
-Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
-
----
- arch/mips/bcm63xx/clk.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -489,6 +489,8 @@ static struct clk_lookup bcm3368_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("fff8c100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("fff8c120.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -505,7 +507,9 @@ static struct clk_lookup bcm6318_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10003000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -519,7 +523,10 @@ static struct clk_lookup bcm6328_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -532,6 +539,7 @@ static struct clk_lookup bcm6338_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -546,6 +554,7 @@ static struct clk_lookup bcm6345_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -560,6 +569,7 @@ static struct clk_lookup bcm6348_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -576,6 +586,8 @@ static struct clk_lookup bcm6358_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0120.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -595,7 +607,10 @@ static struct clk_lookup bcm6362_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -611,6 +626,8 @@ static struct clk_lookup bcm6368_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -625,7 +642,10 @@ static struct clk_lookup bcm63268_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000180.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("100001a0.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
diff --git a/target/linux/bcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch b/target/linux/bcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch
deleted file mode 100644 (file)
index 03b8bfc..0000000
+++ /dev/null
@@ -1,172 +0,0 @@
-From 39d2882058345b5994680b8731848a0343878019 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 4 Feb 2017 12:58:50 +0100
-Subject: [PATCH 7/8] MIPS: BCM63XX: do not register SPI controllers
-
-We now register them through DT, so no need to keep them here.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -27,9 +27,7 @@
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_flash.h>
--#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
--#include <bcm63xx_dev_spi.h>
- #include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -236,10 +234,6 @@ int __init board_register_devices(void)
-            bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
-               pr_err(PFX "failed to register fallback SPROM\n");
--      bcm63xx_spi_register();
--
--      bcm63xx_hsspi_register();
--
-       bcm63xx_flash_register();
-       bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
--                 dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
-+                 dev-rng.o dev-uart.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
-                  sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ /dev/null
-@@ -1,48 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/platform_device.h>
--
--#include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_hsspi.h>
--#include <bcm63xx_regs.h>
--
--static struct resource spi_resources[] = {
--      {
--              .start          = -1, /* filled at runtime */
--              .end            = -1, /* filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              .start          = -1, /* filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct platform_device bcm63xx_hsspi_device = {
--      .name           = "bcm63xx-hsspi",
--      .id             = 0,
--      .num_resources  = ARRAY_SIZE(spi_resources),
--      .resource       = spi_resources,
--};
--
--int __init bcm63xx_hsspi_register(void)
--{
--      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
--              !BCMCPU_IS_63268())
--              return -ENODEV;
--
--      spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
--      spi_resources[0].end = spi_resources[0].start;
--      spi_resources[0].end += RSET_HSSPI_SIZE - 1;
--      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
--
--      return platform_device_register(&bcm63xx_hsspi_device);
--}
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ /dev/null
-@@ -1,60 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
-- * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/export.h>
--#include <linux/platform_device.h>
--#include <linux/err.h>
--#include <linux/clk.h>
--
--#include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_spi.h>
--#include <bcm63xx_regs.h>
--
--static struct resource spi_resources[] = {
--      {
--              .start          = -1, /* filled at runtime */
--              .end            = -1, /* filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              .start          = -1, /* filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct platform_device bcm63xx_spi_device = {
--      .id             = -1,
--      .num_resources  = ARRAY_SIZE(spi_resources),
--      .resource       = spi_resources,
--};
--
--int __init bcm63xx_spi_register(void)
--{
--      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
--              return -ENODEV;
--
--      spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
--      spi_resources[0].end = spi_resources[0].start;
--      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
--
--      if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
--              bcm63xx_spi_device.name = "bcm6348-spi",
--              spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1;
--      }
--
--      if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
--              bcm63xx_spi_device.name = "bcm6358-spi",
--              spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
--      }
--
--      return platform_device_register(&bcm63xx_spi_device);
--}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-+++ /dev/null
-@@ -1,9 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--#ifndef BCM63XX_DEV_HSSPI_H
--#define BCM63XX_DEV_HSSPI_H
--
--#include <linux/types.h>
--
--int bcm63xx_hsspi_register(void);
--
--#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/target/linux/bcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch b/target/linux/bcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch
deleted file mode 100644 (file)
index e9d4481..0000000
+++ /dev/null
@@ -1,259 +0,0 @@
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
--                 dev-rng.o dev-uart.o dev-wdt.o \
-+                 dev-rng.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
-                  sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
---- a/arch/mips/bcm63xx/dev-uart.c
-+++ /dev/null
-@@ -1,76 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/platform_device.h>
--#include <bcm63xx_cpu.h>
--
--static struct resource uart0_resources[] = {
--      {
--              /* start & end filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              /* start filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct resource uart1_resources[] = {
--      {
--              /* start & end filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              /* start filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct platform_device bcm63xx_uart_devices[] = {
--      {
--              .name           = "bcm63xx_uart",
--              .id             = 0,
--              .num_resources  = ARRAY_SIZE(uart0_resources),
--              .resource       = uart0_resources,
--      },
--
--      {
--              .name           = "bcm63xx_uart",
--              .id             = 1,
--              .num_resources  = ARRAY_SIZE(uart1_resources),
--              .resource       = uart1_resources,
--      }
--};
--
--int __init bcm63xx_uart_register(unsigned int id)
--{
--      if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
--              return -ENODEV;
--
--      if (id == 1 && (!BCMCPU_IS_3368() && !BCMCPU_IS_6358() &&
--              !BCMCPU_IS_6368()))
--              return -ENODEV;
--
--      if (id == 0) {
--              uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0);
--              uart0_resources[0].end = uart0_resources[0].start +
--                      RSET_UART_SIZE - 1;
--              uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
--      }
--
--      if (id == 1) {
--              uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1);
--              uart1_resources[0].end = uart1_resources[0].start +
--                      RSET_UART_SIZE - 1;
--              uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1);
--      }
--
--      return platform_device_register(&bcm63xx_uart_devices[id]);
--}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
-+++ /dev/null
-@@ -1,7 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--#ifndef BCM63XX_DEV_UART_H_
--#define BCM63XX_DEV_UART_H_
--
--int bcm63xx_uart_register(unsigned int id);
--
--#endif /* BCM63XX_DEV_UART_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -32,8 +32,6 @@ struct board_info {
-       unsigned int    has_ohci0:1;
-       unsigned int    has_ehci0:1;
-       unsigned int    has_usbd:1;
--      unsigned int    has_uart0:1;
--      unsigned int    has_uart1:1;
-       unsigned int    use_fallback_sprom:1;
-       /* ethernet config */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -20,7 +20,6 @@
- #include <asm/prom.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_gpio.h>
-@@ -188,12 +187,6 @@ int __init board_register_devices(void)
-       bcm63xx_gpio_init();
--      if (board.has_uart0)
--              bcm63xx_uart_register(0);
--
--      if (board.has_uart1)
--              bcm63xx_uart_register(1);
--
-       if (board.has_pccard)
-               bcm63xx_pcmcia_register();
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -35,9 +35,6 @@ static struct board_info __initdata boar
-       .name                           = "CVG834G_E15R3921",
-       .expected_cpu_id                = 0x3368,
--      .has_uart0                      = 1,
--      .has_uart1                      = 1,
--
-       .has_enet0                      = 1,
-       .has_pci                        = 1,
-@@ -67,7 +64,6 @@ static struct board_info __initdata boar
-       .name                           = "96328avng",
-       .expected_cpu_id                = 0x6328,
--      .has_uart0                      = 1,
-       .has_pci                        = 1,
-       .has_usbd                       = 0,
-       .use_fallback_sprom             = 1,
-@@ -116,7 +112,6 @@ static struct board_info __initdata boar
-       .name                           = "96338GW",
-       .expected_cpu_id                = 0x6338,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .enet0 = {
-               .force_speed_100        = 1,
-@@ -159,7 +154,6 @@ static struct board_info __initdata boar
-       .name                           = "96338W",
-       .expected_cpu_id                = 0x6338,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .enet0 = {
-               .force_speed_100        = 1,
-@@ -204,8 +198,6 @@ static struct board_info __initdata boar
- static struct board_info __initdata board_96345gw2 = {
-       .name                           = "96345GW2",
-       .expected_cpu_id                = 0x6345,
--
--      .has_uart0                      = 1,
- };
- #endif
-@@ -217,7 +209,6 @@ static struct board_info __initdata boar
-       .name                           = "96348R",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_pci                        = 1,
-       .use_fallback_sprom             = 1,
-@@ -262,7 +253,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW-10",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -315,7 +305,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW-11",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -370,7 +359,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -421,7 +409,6 @@ static struct board_info __initdata boar
-       .name                           = "F@ST2404",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -466,7 +453,6 @@ static struct board_info __initdata boar
-       .name                           = "DV201AMR",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_pci                        = 1,
-       .use_fallback_sprom             = 1,
-       .has_ohci0                      = 1,
-@@ -487,7 +473,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW-A",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -514,7 +499,6 @@ static struct board_info __initdata boar
-       .name                           = "96358VW",
-       .expected_cpu_id                = 0x6358,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -567,7 +551,6 @@ static struct board_info __initdata boar
-       .name                           = "96358VW2",
-       .expected_cpu_id                = 0x6358,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -617,7 +600,6 @@ static struct board_info __initdata boar
-       .name                           = "AGPF-S0",
-       .expected_cpu_id                = 0x6358,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
diff --git a/target/linux/bcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch b/target/linux/bcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch
deleted file mode 100644 (file)
index e139426..0000000
+++ /dev/null
@@ -1,343 +0,0 @@
-From 997f53b174c63153335508c22dc4493e8e5808d6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Feb 2015 17:52:32 +0100
-Subject: [PATCH] MIPS: BCM63XX: remove leds and buttons
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  262 -----------------------------
- 1 file changed, 262 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -43,14 +43,6 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
--      .leds = {
--              {
--                      .name           = "CVG834G:green:power",
--                      .gpio           = 37,
--                      .default_trigger= "default-on",
--              },
--      },
--
-       .ephy_reset_gpio                = 36,
-       .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
- };
-@@ -72,35 +64,6 @@ static struct board_info __initdata boar
-               .use_fullspeed          = 0,
-               .port_no                = 0,
-       },
--
--      .leds = {
--              {
--                      .name           = "96328avng::ppp-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "96328avng::power",
--                      .gpio           = 4,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "96328avng::power-fail",
--                      .gpio           = 8,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "96328avng::wps",
--                      .gpio           = 9,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "96328avng::ppp",
--                      .gpio           = 11,
--                      .active_low     = 1,
--              },
--      },
- };
- #endif
-@@ -119,35 +82,6 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0                      = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ses",
--                      .gpio           = 5,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              }
--      },
- };
- static struct board_info __initdata board_96338w = {
-@@ -159,35 +93,6 @@ static struct board_info __initdata boar
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
--
--      .leds = {
--              {
--                      .name           = "adsl",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ses",
--                      .gpio           = 5,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- #endif
-@@ -217,36 +122,6 @@ static struct board_info __initdata boar
-               .has_phy                = 1,
-               .use_internal_phy       = 1,
-       },
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_96348gw_10 = {
-@@ -270,35 +145,6 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
-       .has_pccard                     = 1,
-       .has_ehci0                      = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_96348gw_11 = {
-@@ -324,35 +170,6 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_96348gw = {
-@@ -374,35 +191,6 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0 = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_FAST2404 = {
-@@ -518,33 +306,6 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 15,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 22,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 23,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 4,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 5,
--              },
--      },
- };
- static struct board_info __initdata board_96358vw2 = {
-@@ -571,29 +332,6 @@ static struct board_info __initdata boar
-       .has_pccard = 1,
-       .has_ehci0 = 1,
-       .num_usbh_ports                 = 2,
--
--      .leds = {
--              {
--                      .name           = "adsl",
--                      .gpio           = 22,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 23,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 5,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_AGPFS0 = {
diff --git a/target/linux/bcm63xx/patches-4.14/400-bcm963xx_flashmap.patch b/target/linux/bcm63xx/patches-4.14/400-bcm963xx_flashmap.patch
deleted file mode 100644 (file)
index c693ace..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
- drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
- drivers/mtd/redboot.c                     |   13 +++++++++--
- 3 files changed, 38 insertions(+), 26 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -35,7 +35,7 @@ static struct mtd_partition mtd_partitio
-       }
- };
--static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-+static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
- static struct physmap_flash_data flash_data = {
-       .width                  = 2,
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
-       int nulllen = 0;
-       int numslots;
-       unsigned long offset;
-+      unsigned long fis_origin = 0;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-       static char nullstring[] = "unallocated";
- #endif
-@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru
-               goto out;
-       }
-+      if (data && data->origin) {
-+              fis_origin = data->origin;
-+      } else {
-+              for (i = 0; i < numslots; i++) {
-+                      if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+                              fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+                      }
-+              }
-+      }
-+
-       for (i = 0; i < numslots; i++) {
-               struct fis_list *new_fl, **prev;
-@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru
-                       goto out;
-               }
-               new_fl->img = &buf[i];
--              if (data && data->origin)
--                      buf[i].flash_base -= data->origin;
--              else
--                      buf[i].flash_base &= master->size-1;
-+              if (fis_origin)
-+                      buf[i].flash_base -= fis_origin;
-+
-+              buf[i].flash_base &= (master->size << 1) - 1;
-               /* I'm sure the JFFS2 code has done me permanent damage.
-                * I now think the following is _normal_
diff --git a/target/linux/bcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch b/target/linux/bcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch
deleted file mode 100644 (file)
index efefba4..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/include/linux/bcm963xx_tag.h
-+++ b/include/linux/bcm963xx_tag.h
-@@ -92,8 +92,10 @@ struct bcm_tag {
-       __u32 rootfs_crc;
-       /* 224-227: CRC32 of kernel partition */
-       __u32 kernel_crc;
--      /* 228-235: Unused at present */
--      char reserved1[8];
-+      /* 228-231: Unused at present */
-+      char reserved1[4];
-+      /* 222-235: Openwrt: real rootfs length */
-+      __u32 real_rootfs_length;
-       /* 236-239: CRC32 of header excluding last 20 bytes */
-       __u32 header_crc;
-       /* 240-255: Unused at present */
---- a/drivers/mtd/parsers/parser_imagetag.c
-+++ b/drivers/mtd/parsers/parser_imagetag.c
-@@ -137,7 +137,8 @@ static int bcm963xx_parse_imagetag_parti
-               } else {
-                       /* OpenWrt layout */
-                       rootfsaddr = kerneladdr + kernellen;
--                      rootfslen = spareaddr - rootfsaddr;
-+                      rootfslen = buf->real_rootfs_length;
-+                      spareaddr = rootfsaddr + rootfslen;
-               }
-       } else {
-               goto out;
diff --git a/target/linux/bcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/bcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
deleted file mode 100644 (file)
index 3604910..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1637,7 +1637,7 @@ static int bcm_enet_change_mtu(struct ne
-               return -EBUSY;
-       /* add ethernet header + vlan tag size */
--      actual_mtu += VLAN_ETH_HLEN;
-+      actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
-       /*
-        * setup maximum size before we get overflow mark in
diff --git a/target/linux/bcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch b/target/linux/bcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch
deleted file mode 100644 (file)
index efd9763..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -97,6 +97,8 @@ void __init board_early_setup(const stru
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G3_EXT_MII |
-                               GPIO_MODE_6348_G0_EXT_MII;
-+              else if (BCMCPU_IS_6358())
-+                      val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -652,6 +652,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
- #define GPIO_MODE_6358_UTOPIA         (1 << 12)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
- #define GPIO_MODE_6368_ANALOG_AFE_0   (1 << 0)
- #define GPIO_MODE_6368_ANALOG_AFE_1   (1 << 1)
diff --git a/target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
deleted file mode 100644 (file)
index c9532e6..0000000
+++ /dev/null
@@ -1,269 +0,0 @@
-From 7fa63fdde703aaabaa7199ae879219737a98a3f3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 6 Jan 2012 12:24:18 +0100
-Subject: [PATCH] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
-
-Only connect/disconnect the phy during probe and remove, not during any
-open/close. The phy seldom changes during the runtime, and disconnecting
-the phy during close will prevent it from keeping any configuration over
-a down/up cycle.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 158 +++++++++++++--------------
- 1 file changed, 78 insertions(+), 80 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi
-       struct bcm_enet_priv *priv;
-       struct sockaddr addr;
-       struct device *kdev;
--      struct phy_device *phydev;
-       int i, ret;
-       unsigned int size;
--      char phy_id[MII_BUS_ID_SIZE + 3];
-       void *p;
-       u32 val;
-@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi
-       kdev = &priv->pdev->dev;
-       if (priv->has_phy) {
--              /* connect to PHY */
--              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
--                       priv->mii_bus->id, priv->phy_id);
--
--              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
--                                   PHY_INTERFACE_MODE_MII);
--
--              if (IS_ERR(phydev)) {
--                      dev_err(kdev, "could not attach to PHY\n");
--                      return PTR_ERR(phydev);
--              }
--
--              /* mask with MAC supported features */
--              phydev->supported &= (SUPPORTED_10baseT_Half |
--                                    SUPPORTED_10baseT_Full |
--                                    SUPPORTED_100baseT_Half |
--                                    SUPPORTED_100baseT_Full |
--                                    SUPPORTED_Autoneg |
--                                    SUPPORTED_Pause |
--                                    SUPPORTED_MII);
--              phydev->advertising = phydev->supported;
--
--              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
--                      phydev->advertising |= SUPPORTED_Pause;
--              else
--                      phydev->advertising &= ~SUPPORTED_Pause;
--
--              phy_attached_info(phydev);
--
-+              /* Reset state */
-               priv->old_link = 0;
-               priv->old_duplex = -1;
-               priv->old_pause = -1;
--      } else {
--              phydev = NULL;
-       }
-       /* mask all interrupts and request them */
-@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi
-       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
-       if (ret)
--              goto out_phy_disconnect;
-+              return ret;
-       ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
-                         dev->name, dev);
-@@ -1086,8 +1054,8 @@ static int bcm_enet_open(struct net_devi
-       enet_dmac_writel(priv, priv->dma_chan_int_mask,
-                        ENETDMAC_IRMASK, priv->tx_chan);
--      if (phydev)
--              phy_start(phydev);
-+      if (priv->has_phy)
-+              phy_start(dev->phydev);
-       else
-               bcm_enet_adjust_link(dev);
-@@ -1128,10 +1096,6 @@ out_freeirq_rx:
- out_freeirq:
-       free_irq(dev->irq, dev);
--out_phy_disconnect:
--      if (phydev)
--              phy_disconnect(phydev);
--
-       return ret;
- }
-@@ -1236,10 +1200,6 @@ static int bcm_enet_stop(struct net_devi
-       free_irq(priv->irq_rx, dev);
-       free_irq(dev->irq, dev);
--      /* release phy */
--      if (priv->has_phy)
--              phy_disconnect(dev->phydev);
--
-       return 0;
- }
-@@ -1805,14 +1765,49 @@ static int bcm_enet_probe(struct platfor
-       /* do minimal hardware init to be able to probe mii bus */
-       bcm_enet_hw_preinit(priv);
-+      spin_lock_init(&priv->rx_lock);
-+
-+      /* init rx timeout (used for oom) */
-+      init_timer(&priv->rx_timeout);
-+      priv->rx_timeout.function = bcm_enet_refill_rx_timer;
-+      priv->rx_timeout.data = (unsigned long)dev;
-+
-+      /* init the mib update lock&work */
-+      mutex_init(&priv->mib_update_lock);
-+      INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
-+
-+      /* zero mib counters */
-+      for (i = 0; i < ENET_MIB_REG_COUNT; i++)
-+              enet_writel(priv, 0, ENET_MIB_REG(i));
-+
-+      /* register netdevice */
-+      dev->netdev_ops = &bcm_enet_ops;
-+      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
-+
-+      dev->ethtool_ops = &bcm_enet_ethtool_ops;
-+      /* MTU range: 46 - 2028 */
-+      dev->min_mtu = ETH_ZLEN - ETH_HLEN;
-+      dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
-+      SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+      ret = register_netdev(dev);
-+      if (ret)
-+              goto out_uninit_hw;
-+
-+      netif_carrier_off(dev);
-+      platform_set_drvdata(pdev, dev);
-+      priv->pdev = pdev;
-+      priv->net_dev = dev;
-       /* MII bus registration */
-       if (priv->has_phy) {
-+              struct phy_device *phydev;
-+              char phy_id[MII_BUS_ID_SIZE + 3];
-               priv->mii_bus = mdiobus_alloc();
-               if (!priv->mii_bus) {
-                       ret = -ENOMEM;
--                      goto out_uninit_hw;
-+                      goto out_unregister_netdev;
-               }
-               bus = priv->mii_bus;
-@@ -1836,6 +1831,35 @@ static int bcm_enet_probe(struct platfor
-                       dev_err(&pdev->dev, "unable to register mdio bus\n");
-                       goto out_free_mdio;
-               }
-+
-+              /* connect to PHY */
-+              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-+                       priv->mii_bus->id, priv->phy_id);
-+
-+              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
-+                                   PHY_INTERFACE_MODE_MII);
-+
-+              if (IS_ERR(phydev)) {
-+                      dev_err(&pdev->dev, "could not attach to PHY\n");
-+                      goto out_unregister_mdio;
-+              }
-+
-+              /* mask with MAC supported features */
-+              phydev->supported &= (SUPPORTED_10baseT_Half |
-+                                    SUPPORTED_10baseT_Full |
-+                                    SUPPORTED_100baseT_Half |
-+                                    SUPPORTED_100baseT_Full |
-+                                    SUPPORTED_Autoneg |
-+                                    SUPPORTED_Pause |
-+                                    SUPPORTED_MII);
-+              phydev->advertising = phydev->supported;
-+
-+              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-+                      phydev->advertising |= SUPPORTED_Pause;
-+              else
-+                      phydev->advertising &= ~SUPPORTED_Pause;
-+
-+              phy_attached_info(phydev);
-       } else {
-               /* run platform code to initialize PHY device */
-@@ -1843,47 +1867,16 @@ static int bcm_enet_probe(struct platfor
-                   pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
-                                  bcm_enet_mdio_write_mii)) {
-                       dev_err(&pdev->dev, "unable to configure mdio bus\n");
--                      goto out_uninit_hw;
-+                      goto out_unregister_netdev;
-               }
-       }
--      spin_lock_init(&priv->rx_lock);
--
--      /* init rx timeout (used for oom) */
--      init_timer(&priv->rx_timeout);
--      priv->rx_timeout.function = bcm_enet_refill_rx_timer;
--      priv->rx_timeout.data = (unsigned long)dev;
--
--      /* init the mib update lock&work */
--      mutex_init(&priv->mib_update_lock);
--      INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
--
--      /* zero mib counters */
--      for (i = 0; i < ENET_MIB_REG_COUNT; i++)
--              enet_writel(priv, 0, ENET_MIB_REG(i));
--
--      /* register netdevice */
--      dev->netdev_ops = &bcm_enet_ops;
--      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
--
--      dev->ethtool_ops = &bcm_enet_ethtool_ops;
--      /* MTU range: 46 - 2028 */
--      dev->min_mtu = ETH_ZLEN - ETH_HLEN;
--      dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
--      SET_NETDEV_DEV(dev, &pdev->dev);
--
--      ret = register_netdev(dev);
--      if (ret)
--              goto out_unregister_mdio;
--
--      netif_carrier_off(dev);
--      platform_set_drvdata(pdev, dev);
--      priv->pdev = pdev;
--      priv->net_dev = dev;
--
-       return 0;
- out_unregister_mdio:
-+      if (dev->phydev)
-+              phy_disconnect(dev->phydev);
-+
-       if (priv->mii_bus)
-               mdiobus_unregister(priv->mii_bus);
-@@ -1891,6 +1884,9 @@ out_free_mdio:
-       if (priv->mii_bus)
-               mdiobus_free(priv->mii_bus);
-+out_unregister_netdev:
-+      unregister_netdev(dev);
-+
- out_uninit_hw:
-       /* turn off mdc clock */
-       enet_writel(priv, 0, ENET_MIISC_REG);
-@@ -1921,6 +1917,7 @@ static int bcm_enet_remove(struct platfo
-       enet_writel(priv, 0, ENET_MIISC_REG);
-       if (priv->has_phy) {
-+              phy_disconnect(dev->phydev);
-               mdiobus_unregister(priv->mii_bus);
-               mdiobus_free(priv->mii_bus);
-       } else {
diff --git a/target/linux/bcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/bcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
deleted file mode 100644 (file)
index 7bd1e51..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 15 Jul 2012 20:08:57 +0200
-Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
- 2 files changed, 25 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -968,6 +968,19 @@
- #define ENETSW_PORTOV_FDX_MASK                (1 << 1)
- #define ENETSW_PORTOV_LINKUP_MASK     (1 << 0)
-+/* Port RGMII control register */
-+#define ENETSW_RGMII_CTRL_REG(x)      (0x60 + (x))
-+#define ENETSW_RGMII_CTRL_GMII_CLK_EN (1 << 7)
-+#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
-+#define ENETSW_RGMII_CTRL_MII_MODE_MASK       (3 << 4)
-+#define ENETSW_RGMII_CTRL_RGMII_MODE  (0 << 4)
-+#define ENETSW_RGMII_CTRL_MII_MODE    (1 << 4)
-+#define ENETSW_RGMII_CTRL_RVMII_MODE  (2 << 4)
-+#define ENETSW_RGMII_CTRL_TIMING_SEL_EN       (1 << 0)
-+
-+/* Port RGMII timing register */
-+#define ENETSW_RGMII_TIMING_REG(x)    (0x68 + (x))
-+
- /* MDIO control register */
- #define ENETSW_MDIOC_REG              (0xb0)
- #define ENETSW_MDIOC_EXT_MASK         (1 << 16)
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2192,6 +2192,18 @@ static int bcm_enetsw_open(struct net_de
-               priv->sw_port_link[i] = 0;
-       }
-+      /* enable external ports */
-+      for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
-+              u8 rgmii_ctrl;
-+
-+              if (!priv->used_ports[i].used)
-+                      continue;
-+
-+              rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-+              rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+              enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-+      }
-+
-       /* reset mib */
-       val = enetsw_readb(priv, ENETSW_GMCR_REG);
-       val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/bcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/bcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
deleted file mode 100644 (file)
index a91494d..0000000
+++ /dev/null
@@ -1,157 +0,0 @@
-From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 3 Jul 2011 15:00:38 +0200
-Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-flash.c                     |   35 +++++++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
- 2 files changed, 33 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -17,6 +17,9 @@
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
- #include <linux/mtd/spi-nor.h>
-+#include <linux/of.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-@@ -66,6 +69,41 @@ void __init bcm63xx_flash_force_phys_bas
-       mtd_resources[0].end = end;
- }
-+static struct spi_board_info bcm63xx_spi_flash_info[] = {
-+      {
-+              .bus_num        = 0,
-+              .chip_select    = 0,
-+              .mode           = 0,
-+              .max_speed_hz   = 781000,
-+              .modalias       = "m25p80",
-+      },
-+};
-+
-+static void bcm63xx_of_update_spi_flash_speed(struct device_node *np,
-+                                             unsigned int new_hz)
-+{
-+      struct property *max_hz;
-+      __be32 *hz;
-+
-+      max_hz = kzalloc(sizeof(*max_hz) + sizeof(*hz), GFP_KERNEL);
-+      if (!max_hz)
-+              return;
-+
-+      max_hz->name = kstrdup("spi-max-frequency", GFP_KERNEL);
-+      if (!max_hz->name) {
-+              kfree(max_hz);
-+              return;
-+      }
-+
-+      max_hz->value = max_hz + 1;
-+      max_hz->length = sizeof(*hz);
-+
-+      hz = max_hz->value;
-+      *hz = cpu_to_be32(new_hz);
-+
-+      of_update_property(np, max_hz);
-+}
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
-       u32 val;
-@@ -73,9 +111,15 @@ static int __init bcm63xx_detect_flash_t
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6318_CPU_ID:
-               /* only support serial flash */
-+              bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
-               return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6328_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-+              if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
-+
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-@@ -94,12 +138,20 @@ static int __init bcm63xx_detect_flash_t
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6362_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+              if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-                       return BCM63XX_FLASH_TYPE_NAND;
-       case BCM6368_CPU_ID:
-               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-+              if (val & STRAPBUS_6368_SPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
-               case STRAPBUS_6368_BOOT_SEL_NAND:
-                       return BCM63XX_FLASH_TYPE_NAND;
-@@ -110,6 +162,11 @@ static int __init bcm63xx_detect_flash_t
-               }
-       case BCM63268_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-@@ -176,6 +233,7 @@ void __init bcm63xx_flash_detect(void)
- int __init bcm63xx_flash_register(void)
- {
-+      struct device_node *np;
-       u32 val;
-       switch (flash_type) {
-@@ -195,8 +253,14 @@ int __init bcm63xx_flash_register(void)
-               return platform_device_register(&mtd_dev);
-       case BCM63XX_FLASH_TYPE_SERIAL:
--              pr_warn("unsupported serial flash detected\n");
--              return -ENODEV;
-+              np = of_find_compatible_node(NULL, NULL, "jedec,spi-nor");
-+              if (np) {
-+                      bcm63xx_of_update_spi_flash_speed(np, bcm63xx_spi_flash_info[0].max_speed_hz);
-+                      of_node_put(np);
-+                      return 0;
-+              } else {
-+                      return -ENODEV;
-+              }
-       case BCM63XX_FLASH_TYPE_NAND:
-               pr_warn("unsupported NAND flash detected\n");
-               return -ENODEV;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -709,6 +709,7 @@
- #define GPIO_STRAPBUS_REG             0x40
- #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
- #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
-+#define STRAPBUS_6368_SPI_CLK_FAST    (1 << 6)
- #define STRAPBUS_6368_BOOT_SEL_MASK   0x3
- #define STRAPBUS_6368_BOOT_SEL_NAND   0
- #define STRAPBUS_6368_BOOT_SEL_SERIAL 1
-@@ -1565,6 +1566,7 @@
- #define IDDQ_CTRL_63268_USBH          (1 << 4)
- #define MISC_STRAPBUS_6328_REG                0x240
-+#define STRAPBUS_6328_HSSPI_CLK_FAST  (1 << 4)
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
- #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
diff --git a/target/linux/bcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/bcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
deleted file mode 100644 (file)
index 16d47b4..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:40:03 +0200
-Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
- 2 files changed, 18 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -31,6 +31,7 @@
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include <pci_ath9k_fixup.h>
- #include "board_common.h"
-@@ -177,6 +178,7 @@ static struct of_device_id of_ids[] = {
- int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
-+      int i;
- #if CONFIG_OF
-       if (of_have_populated_dt()) {
-@@ -241,6 +243,10 @@ int __init board_register_devices(void)
-                                       board.ephy_reset_gpio_flags);
-       }
-+      /* register any fixups */
-+      for (i = 0; i < board.has_caldata; i++)
-+              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+
-       return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -9,6 +9,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_fallback_sprom.h>
-+#include <pci_ath9k_fixup.h>
- /*
-  * flash mapping
-@@ -16,6 +17,11 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
-+struct ath9k_caldata {
-+      unsigned int    slot;
-+      u32             caldata_offset;
-+};
-+
- /*
-  * board definition
-  */
-@@ -33,6 +39,10 @@ struct board_info {
-       unsigned int    has_ehci0:1;
-       unsigned int    has_usbd:1;
-       unsigned int    use_fallback_sprom:1;
-+      unsigned int    has_caldata:2;
-+
-+      /* wifi calibration data config */
-+      struct ath9k_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/bcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/bcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
deleted file mode 100644 (file)
index 9fbfae4..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 13 Jan 2014 12:12:30 +0100
-Subject: [PATCH] MIPS: BCM63XX: export the attached flash type
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 5 +++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -270,3 +270,8 @@ int __init bcm63xx_flash_register(void)
-               return -ENODEV;
-       }
- }
-+
-+int bcm63xx_flash_get_type(void)
-+{
-+      return flash_type;
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -14,4 +14,6 @@ void bcm63xx_flash_force_phys_base_addre
- int __init bcm63xx_flash_register(void);
-+int bcm63xx_flash_get_type(void);
-+
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/bcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
deleted file mode 100644 (file)
index c9d2ee1..0000000
+++ /dev/null
@@ -1,237 +0,0 @@
-From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:36:11 +0200
-Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
-
----
- arch/mips/bcm63xx/Makefile                         |    3 +-
- arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
- 3 files changed, 199 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -3,7 +3,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
--                 sprom.o
-+                 pci-ath9k-fixup.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -0,0 +1,200 @@
-+/*
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <pci_ath9k_fixup.h>
-+
-+#define bcm_hsspi_writel(v, o)        bcm_rset_writel(RSET_HSSPI, (v), (o))
-+
-+struct ath9k_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct ath9k_platform_data pdata;
-+};
-+
-+static int ath9k_num_fixups;
-+static struct ath9k_fixup ath9k_fixups[2] = {
-+      {
-+              .slot = 255,
-+              .pdata = {
-+                      .led_pin        = -1,
-+              },
-+      },
-+      {
-+              .slot = 255,
-+              .pdata = {
-+                      .led_pin        = -1,
-+              },
-+      },
-+};
-+
-+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
-+{
-+      u32 addr;
-+
-+      if (BCMCPU_IS_6328()) {
-+              addr = 0x18000000;
-+      } else {
-+              addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+              addr &= MPI_CSBASE_BASE_MASK;
-+      }
-+
-+      switch (bcm63xx_flash_get_type()) {
-+      case BCM63XX_FLASH_TYPE_PARALLEL:
-+              memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+              return eeprom;
-+      case BCM63XX_FLASH_TYPE_SERIAL:
-+              /* the first megabyte is memory mapped */
-+              if (offset < 0x100000) {
-+                      memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+                      return eeprom;
-+              }
-+
-+              if (BCMCPU_IS_6328()) {
-+                      /* we can change the memory mapped megabyte */
-+                      bcm_hsspi_writel(offset & 0xf00000, 0x18);
-+                      memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+                      bcm_hsspi_writel(0, 0x18);
-+                      return eeprom;
-+              }
-+              /* can't do anything here without talking to the SPI controller. */
-+      case BCM63XX_FLASH_TYPE_NAND:
-+      default:
-+              return NULL;
-+      }
-+}
-+
-+static void ath9k_pci_fixup(struct pci_dev *dev)
-+{
-+      void __iomem *mem;
-+      struct ath9k_platform_data *pdata = NULL;
-+      struct pci_dev *bridge = pci_upstream_bridge(dev);
-+      u16 *cal_data = NULL;
-+      u16 cmd;
-+      u32 bar0;
-+      u32 val;
-+      unsigned i;
-+
-+      for (i = 0; i < ath9k_num_fixups; i++) {
-+              if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              cal_data = ath9k_fixups[i].pdata.eeprom_data;
-+              pdata = &ath9k_fixups[i].pdata;
-+              break;
-+      }
-+
-+      if (cal_data == NULL)
-+              return;
-+
-+      if (*cal_data != 0xa55a) {
-+              pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+              return;
-+      }
-+
-+      pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+      switch (bcm63xx_get_cpu_id()) {
-+      case BCM6328_CPU_ID:
-+              val = BCM_PCIE_MEM_BASE_PA_6328;
-+              break;
-+      case BCM6348_CPU_ID:
-+      case BCM6358_CPU_ID:
-+      case BCM6368_CPU_ID:
-+              val = BCM_PCI_MEM_BASE_PA;
-+              break;
-+      default:
-+              BUG();
-+      }
-+
-+      mem = ioremap(val, 0x10000);
-+      if (!mem) {
-+              pr_err("pci %s: ioremap error\n", pci_name(dev));
-+              return;
-+      }
-+
-+      if (bridge)
-+              pci_enable_device(bridge);
-+
-+      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
-+
-+      pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+      cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+      pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+      /* set offset to first reg address */
-+      cal_data += 3;
-+      while(*cal_data != 0xffff) {
-+              u32 reg;
-+              reg = *cal_data++;
-+              val = *cal_data++;
-+              val |= (*cal_data++) << 16;
-+
-+              writel(val, mem + reg);
-+              udelay(100);
-+      }
-+
-+      pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+      dev->vendor = val & 0xffff;
-+      dev->device = (val >> 16) & 0xffff;
-+
-+      pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+      dev->revision = val & 0xff;
-+      dev->class = val >> 8; /* upper 3 bytes */
-+
-+      pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+      cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+      pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+      if (bridge)
-+              pci_disable_device(bridge);
-+
-+      iounmap(mem);
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-+
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+{
-+      if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-+              return;
-+
-+      ath9k_fixups[ath9k_num_fixups].slot = slot;
-+
-+      if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-+              return;
-+
-+      if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
-+              return;
-+
-+      ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
-+      ath9k_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -0,0 +1,7 @@
-+#ifndef _PCI_ATH9K_FIXUP
-+#define _PCI_ATH9K_FIXUP
-+
-+
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+
-+#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/bcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/bcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch
deleted file mode 100644 (file)
index 2076879..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -2,6 +2,7 @@
- #define _PCI_ATH9K_FIXUP
--void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+      unsigned endian_check) __init;
- #endif /* _PCI_ATH9K_FIXUP */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -20,6 +20,7 @@
- struct ath9k_caldata {
-       unsigned int    slot;
-       u32             caldata_offset;
-+      unsigned int    endian_check:1;
- };
- /*
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -182,12 +182,14 @@ static void ath9k_pci_fixup(struct pci_d
- }
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
--void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+      unsigned endian_check)
- {
-       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-               return;
-       ath9k_fixups[ath9k_num_fixups].slot = slot;
-+      ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-               return;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -245,7 +245,8 @@ int __init board_register_devices(void)
-       /* register any fixups */
-       for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
-+                      board.caldata[i].endian_check);
-       return 0;
- }
diff --git a/target/linux/bcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/bcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch
deleted file mode 100644 (file)
index bb111dc..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -246,7 +246,7 @@ int __init board_register_devices(void)
-       /* register any fixups */
-       for (i = 0; i < board.has_caldata; i++)
-               pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check);
-+                      board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
-       return 0;
- }
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -183,13 +183,15 @@ static void ath9k_pci_fixup(struct pci_d
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
- void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--      unsigned endian_check)
-+      unsigned endian_check, int led_pin, bool led_active_high)
- {
-       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-               return;
-       ath9k_fixups[ath9k_num_fixups].slot = slot;
-       ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-+      ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
-+      ath9k_fixups[ath9k_num_fixups].pdata.led_active_high = led_active_high;
-       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-               return;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -21,6 +21,8 @@ struct ath9k_caldata {
-       unsigned int    slot;
-       u32             caldata_offset;
-       unsigned int    endian_check:1;
-+      int             led_pin;
-+      bool            led_active_high;
- };
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -3,6 +3,6 @@
- void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--      unsigned endian_check) __init;
-+      unsigned endian_check, int led_pin, bool led_active_high) __init;
- #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/bcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/bcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
deleted file mode 100644 (file)
index cc980a1..0000000
+++ /dev/null
@@ -1,185 +0,0 @@
-From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 7 Jan 2013 17:45:39 +0100
-Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
-
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
- arch/mips/bcm63xx/dev-flash.c                      |    2 +-
- arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
- .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
- 7 files changed, 104 insertions(+), 8 deletions(-)
- create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -3,7 +3,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
--                 pci-ath9k-fixup.o sprom.o
-+                 pci-ath9k-fixup.o pci-rt2x00-fixup.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -32,6 +32,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- #include "board_common.h"
-@@ -244,9 +245,19 @@ int __init board_register_devices(void)
-       }
-       /* register any fixups */
--      for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
-+      for (i = 0; i < board.has_caldata; i++) {
-+              switch (board.caldata[i].vendor) {
-+              case PCI_VENDOR_ID_ATHEROS:
-+                      pci_enable_ath9k_fixup(board.caldata[i].slot,
-+                              board.caldata[i].caldata_offset, board.caldata[i].endian_check,
-+                              board.caldata[i].led_pin, board.caldata[i].led_active_high);
-+                      break;
-+              case PCI_VENDOR_ID_RALINK:
-+                      pci_enable_rt2x00_fixup(board.caldata[i].slot,
-+                              board.caldata[i].eeprom);
-+                      break;
-+              }
-+      }
-       return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
-@@ -0,0 +1,72 @@
-+/*
-+ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+#include <bcm63xx_nvram.h>
-+#include <pci_rt2x00_fixup.h>
-+
-+struct rt2x00_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct rt2x00_platform_data pdata;
-+};
-+
-+static int rt2x00_num_fixups;
-+static struct rt2x00_fixup rt2x00_fixups[2] = {
-+      {
-+              .slot = 255,
-+      },
-+      {
-+              .slot = 255,
-+      },
-+};
-+
-+static void rt2x00_pci_fixup(struct pci_dev *dev)
-+{
-+      unsigned i;
-+      struct rt2x00_platform_data *pdata = NULL;
-+
-+      for (i = 0; i < rt2x00_num_fixups; i++) {
-+              if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              pdata = &rt2x00_fixups[i].pdata;
-+              break;
-+      }
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
-+
-+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
-+{
-+      if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].slot = slot;
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+
-+      if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
-+      rt2x00_num_fixups++;
-+}
-+
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -10,6 +10,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- /*
-  * flash mapping
-@@ -17,12 +18,16 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
--struct ath9k_caldata {
-+struct bcm63xx_caldata {
-+      unsigned int    vendor;
-       unsigned int    slot;
-       u32             caldata_offset;
-+      /* Atheros */
-       unsigned int    endian_check:1;
-       int             led_pin;
-       bool            led_active_high;
-+      /* Ralink */
-+      char*           eeprom;
- };
- /*
-@@ -45,7 +50,7 @@ struct board_info {
-       unsigned int    has_caldata:2;
-       /* wifi calibration data config */
--      struct ath9k_caldata caldata[2];
-+      struct bcm63xx_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-@@ -0,0 +1,9 @@
-+#ifndef _PCI_RT2X00_FIXUP
-+#define _PCI_RT2X00_FIXUP
-+
-+#define PCI_VENDOR_ID_RALINK 0x1814
-+
-+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
-+
-+#endif /* _PCI_RT2X00_FIXUP */
-+
diff --git a/target/linux/bcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch b/target/linux/bcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch
deleted file mode 100644 (file)
index 58f1b13..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -332,6 +332,9 @@ struct bcm_enet_priv {
-       struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-       int sw_port_link[ENETSW_MAX_PORT];
-+      /* platform device for associated switch */
-+      struct platform_device *b53_device;
-+
-       /* used to poll switch port state */
-       struct timer_list swphy_poll;
-       spinlock_t enetsw_mdio_lock;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/if_vlan.h>
-+#include <linux/platform_data/b53.h>
- #include <bcm63xx_dev_enet.h>
- #include "bcm63xx_enet.h"
-@@ -1937,7 +1938,8 @@ static int bcm_enet_remove(struct platfo
-       return 0;
- }
--struct platform_driver bcm63xx_enet_driver = {
-+
-+static struct platform_driver bcm63xx_enet_driver = {
-       .probe  = bcm_enet_probe,
-       .remove = bcm_enet_remove,
-       .driver = {
-@@ -1946,6 +1948,42 @@ struct platform_driver bcm63xx_enet_driv
-       },
- };
-+struct b53_platform_data bcm63xx_b53_pdata = {
-+      .chip_id = 0x6300,
-+      .big_endian = 1,
-+};
-+
-+struct platform_device bcm63xx_b53_dev = {
-+      .name           = "b53-switch",
-+      .id             = -1,
-+      .dev            = {
-+              .platform_data = &bcm63xx_b53_pdata,
-+      },
-+};
-+
-+static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
-+{
-+      int ret;
-+
-+      bcm63xx_b53_pdata.regs = priv->base;
-+      bcm63xx_b53_pdata.enabled_ports = port_mask;
-+      bcm63xx_b53_pdata.alias = priv->net_dev->name;
-+
-+      ret = platform_device_register(&bcm63xx_b53_dev);
-+      if (!ret)
-+              priv->b53_device = &bcm63xx_b53_dev;
-+
-+      return ret;
-+}
-+
-+static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
-+{
-+      if (priv->b53_device)
-+              platform_device_unregister(&bcm63xx_b53_dev);
-+
-+      priv->b53_device = NULL;
-+}
-+
- /*
-  * switch mii access callbacks
-  */
-@@ -2204,29 +2242,6 @@ static int bcm_enetsw_open(struct net_de
-               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-       }
--      /* reset mib */
--      val = enetsw_readb(priv, ENETSW_GMCR_REG);
--      val |= ENETSW_GMCR_RST_MIB_MASK;
--      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--      mdelay(1);
--      val &= ~ENETSW_GMCR_RST_MIB_MASK;
--      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--      mdelay(1);
--
--      /* force CPU port state */
--      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
--      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
--      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
--
--      /* enable switch forward engine */
--      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
--      val |= ENETSW_SWMODE_FWD_EN_MASK;
--      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
--
--      /* enable jumbo on all ports */
--      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
--      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
--
-       /* initialize flow control buffer allocation */
-       enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-                       ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2685,6 +2700,9 @@ static int bcm_enetsw_probe(struct platf
-       struct bcm63xx_enetsw_platform_data *pd;
-       struct resource *res_mem;
-       int ret, irq_rx, irq_tx;
-+      unsigned i, num_ports = 0;
-+      u16 port_mask = BIT(8);
-+      u8 val;
-       if (!bcm_enet_shared_base[0])
-               return -EPROBE_DEFER;
-@@ -2767,6 +2785,43 @@ static int bcm_enetsw_probe(struct platf
-       priv->pdev = pdev;
-       priv->net_dev = dev;
-+      /* reset mib */
-+      val = enetsw_readb(priv, ENETSW_GMCR_REG);
-+      val |= ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+      val &= ~ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+
-+      /* force CPU port state */
-+      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
-+      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
-+      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
-+
-+      /* enable switch forward engine */
-+      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
-+      val |= ENETSW_SWMODE_FWD_EN_MASK;
-+      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
-+
-+      /* enable jumbo on all ports */
-+      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
-+      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
-+
-+      for (i = 0; i < priv->num_ports; i++) {
-+              struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
-+
-+              if (!port->used)
-+                      continue;
-+
-+              num_ports++;
-+              port_mask |= BIT(i);
-+      }
-+
-+      /* only register if there is more than one external port */
-+      if (num_ports > 1)
-+              bcmenet_switch_register(priv, port_mask);
-+
-       return 0;
- out_disable_clk:
-@@ -2788,6 +2843,9 @@ static int bcm_enetsw_remove(struct plat
-       priv = netdev_priv(dev);
-       unregister_netdev(dev);
-+      /* remove switch */
-+      bcmenet_switch_unregister(priv);
-+
-       clk_disable_unprepare(priv->mac_clk);
-       free_netdev(dev);
diff --git a/target/linux/bcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/bcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch
deleted file mode 100644 (file)
index 6235c8c..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2744,9 +2744,9 @@ static int bcm_enetsw_probe(struct platf
-       if (ret)
-               goto out;
--      priv->base = devm_ioremap_resource(&pdev->dev, res_mem);
--      if (IS_ERR(priv->base)) {
--              ret = PTR_ERR(priv->base);
-+      priv->base = devm_ioremap(&pdev->dev, res_mem->start, resource_size(res_mem));
-+      if (priv->base == NULL) {
-+              ret = -ENOMEM;
-               goto out;
-       }
diff --git a/target/linux/bcm63xx/patches-4.14/427-boards_probe_switch.patch b/target/linux/bcm63xx/patches-4.14/427-boards_probe_switch.patch
deleted file mode 100644 (file)
index 4b206a2..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -77,6 +77,8 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -90,6 +92,8 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -138,6 +142,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -162,6 +168,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -186,6 +194,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -208,6 +218,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -231,6 +243,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -252,6 +266,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -271,6 +287,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -298,6 +316,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -323,6 +343,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -348,6 +370,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -371,6 +395,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
diff --git a/target/linux/bcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch b/target/linux/bcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch
deleted file mode 100644 (file)
index dd63183..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -46,7 +46,7 @@ static struct board_info __initdata boar
-       .ephy_reset_gpio                = 36,
-       .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_3368 */
- /*
-  * known 6328 boards
-@@ -65,7 +65,7 @@ static struct board_info __initdata boar
-               .port_no                = 0,
-       },
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-  * known 6338 boards
-@@ -98,7 +98,7 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6338 */
- /*
-  * known 6345 boards
-@@ -108,7 +108,7 @@ static struct board_info __initdata boar
-       .name                           = "96345GW2",
-       .expected_cpu_id                = 0x6345,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6345 */
- /*
-  * known 6348 boards
-@@ -295,7 +295,7 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-  * known 6358 boards
-@@ -403,7 +403,7 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-  * all boards
diff --git a/target/linux/bcm63xx/patches-4.14/500-board-D4PW.patch b/target/linux/bcm63xx/patches-4.14/500-board-D4PW.patch
deleted file mode 100644 (file)
index 456b2a4..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -295,6 +295,21 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+      .name                           = "D-4P-W",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -431,6 +446,7 @@ static const struct board_info __initcon
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
-+      &board_96348_D4PW,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -462,6 +478,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.14/501-board-NB4.patch b/target/linux/bcm63xx/patches-4.14/501-board-NB4.patch
deleted file mode 100644 (file)
index 41c8a7e..0000000
+++ /dev/null
@@ -1,81 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -418,6 +418,60 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+      .name                           = "NB4-SER-r0",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+      .name                           = "NB4-FXC-r1",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -454,6 +508,8 @@ static const struct board_info __initcon
-       &board_96358vw2,
-       &board_AGPFS0,
-       &board_DWVS0,
-+      &board_nb4_ser_r0,
-+      &board_nb4_fxc_r1,
- #endif
- };
-@@ -495,6 +551,8 @@ static struct of_device_id const bcm963x
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
-       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+      { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-+      { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- #endif
diff --git a/target/linux/bcm63xx/patches-4.14/502-board-96338W2_E7T.patch b/target/linux/bcm63xx/patches-4.14/502-board-96338W2_E7T.patch
deleted file mode 100644 (file)
index 69cc716..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -98,6 +98,20 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+      .name                           = "96338W2_E7T",
-+      .expected_cpu_id                = 0x6338,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- /*
-@@ -487,6 +501,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-       &board_96338w,
-+      &board_96338w2_e7t,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-@@ -524,6 +539,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-       { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+      { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
diff --git a/target/linux/bcm63xx/patches-4.14/503-board-CPVA642.patch b/target/linux/bcm63xx/patches-4.14/503-board-CPVA642.patch
deleted file mode 100644 (file)
index 9e3c4e0..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -385,6 +385,25 @@ static struct board_info __initdata boar
-       .num_usbh_ports                 = 2,
- };
-+static struct board_info __initdata board_CPVA642 = {
-+      .name                           = "CPVA642",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
-+
-+
- static struct board_info __initdata board_AGPFS0 = {
-       .name                           = "AGPF-S0",
-       .expected_cpu_id                = 0x6358,
-@@ -522,6 +541,7 @@ static const struct board_info __initcon
-       &board_96358vw,
-       &board_96358vw2,
-       &board_AGPFS0,
-+      &board_CPVA642,
-       &board_DWVS0,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-@@ -569,6 +589,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-       { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-+      { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- #endif
diff --git a/target/linux/bcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch b/target/linux/bcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch
deleted file mode 100644 (file)
index e78832e..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -452,6 +452,22 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+      .name                           = "AW4139",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_nb4_ser_r0 = {
-       .name                           = "NB4-SER-r0",
-       .expected_cpu_id                = 0x6358,
-@@ -543,6 +559,7 @@ static const struct board_info __initcon
-       &board_AGPFS0,
-       &board_CPVA642,
-       &board_DWVS0,
-+      &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
- #endif
-@@ -582,6 +599,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+      { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.14/505-board_spw500v.patch b/target/linux/bcm63xx/patches-4.14/505-board_spw500v.patch
deleted file mode 100644 (file)
index f5ca73d..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -324,6 +324,36 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+static struct sprom_fixup __initdata spw500v_fixups[] = {
-+      { .offset = 46, .value = 0x3046 },
-+      { .offset = 47, .value = 0x15a7 },
-+      { .offset = 48, .value = 0xfa89 },
-+      { .offset = 49, .value = 0xfe79 },
-+      { .offset = 57, .value = 0x6a49 },
-+};
-+
-+static struct board_info __initdata board_spw500v = {
-+      .name                           = "SPW500V",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                   = SPROM_BCM4318,
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+              .board_fixups           = spw500v_fixups,
-+              .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -551,6 +581,7 @@ static const struct board_info __initcon
-       &board_96348gw_a,
-       &board_rta1025w_16,
-       &board_96348_D4PW,
-+      &board_spw500v,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -592,6 +623,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+      { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/bcm63xx/patches-4.14/506-board_gw6200_gw6000.patch b/target/linux/bcm63xx/patches-4.14/506-board_gw6200_gw6000.patch
deleted file mode 100644 (file)
index 77948d1..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -217,6 +217,48 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+static struct board_info __initdata board_gw6200 = {
-+      .name                           = "GW6200",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+      .name                           = "GW6000",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
-       .name                           = "F@ST2404",
-       .expected_cpu_id                = 0x6348,
-@@ -574,6 +616,8 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-       &board_96348gw,
-+      &board_gw6000,
-+      &board_gw6200,
-       &board_96348gw_10,
-       &board_96348gw_11,
-       &board_FAST2404,
-@@ -624,6 +668,8 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-+      { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-+      { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/bcm63xx/patches-4.14/507-board-MAGIC.patch b/target/linux/bcm63xx/patches-4.14/507-board-MAGIC.patch
deleted file mode 100644 (file)
index 3a88e01..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -396,6 +396,31 @@ static struct board_info __initdata boar
-               .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
-       },
- };
-+
-+static struct board_info __initdata board_96348sv = {
-+      .name                           = "MAGIC",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              /* it has BP_ENET_EXTERNAL_PHY */
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+      .has_ehci0                      = 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -626,6 +651,7 @@ static const struct board_info __initcon
-       &board_rta1025w_16,
-       &board_96348_D4PW,
-       &board_spw500v,
-+      &board_96348sv,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -670,6 +696,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+      { .compatible = "telsey,magic", .data = &board_96348sv, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/bcm63xx/patches-4.14/508-board_hw553.patch b/target/linux/bcm63xx/patches-4.14/508-board_hw553.patch
deleted file mode 100644 (file)
index e6e94f7..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -618,6 +618,32 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
-       .num_usbh_ports                 = 2,
- };
-+
-+static struct board_info __initdata board_HW553 = {
-+      .name                           = "HW553",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -663,6 +689,7 @@ static const struct board_info __initcon
-       &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-+      &board_HW553,
- #endif
- };
-@@ -706,6 +733,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+      { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.14/509-board_rta1320_16m.patch b/target/linux/bcm63xx/patches-4.14/509-board_rta1320_16m.patch
deleted file mode 100644 (file)
index cfe5555..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -112,6 +112,20 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+      .name                           = "RTA1320_16M",
-+      .expected_cpu_id                = 0x6338,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- /*
-@@ -660,6 +674,7 @@ static const struct board_info __initcon
-       &board_96338gw,
-       &board_96338w,
-       &board_96338w2_e7t,
-+      &board_rta1320_16m,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-@@ -704,6 +719,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-       { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+      { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, },
-       { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
diff --git a/target/linux/bcm63xx/patches-4.14/510-board_spw303v.patch b/target/linux/bcm63xx/patches-4.14/510-board_spw303v.patch
deleted file mode 100644 (file)
index 69432c9..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -658,6 +658,20 @@ static struct board_info __initdata boar
-               .pci_dev                        = 1,
-       },
- };
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+      .name                   = "96358-502V",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_enet0              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -705,6 +719,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-       &board_HW553,
-+      &board_spw303v,
- #endif
- };
-@@ -756,6 +771,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-       { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-+      { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/bcm63xx/patches-4.14/511-board_V2500V.patch b/target/linux/bcm63xx/patches-4.14/511-board_V2500V.patch
deleted file mode 100644 (file)
index c77eb00..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -435,6 +435,26 @@ static struct board_info __initdata boar
-       .has_pccard                     = 1,
-       .has_ehci0                      = 1,
- };
-+
-+static struct board_info __initdata board_V2500V_BB = {
-+      .name                           = "V2500V_BB",
-+        .expected_cpu_id                = 0x6348,
-+
-+        .has_enet0                      = 1,
-+        .has_enet1                      = 1,
-+        .has_pci                        = 1,
-+
-+        .enet0 = {
-+                .has_phy                = 1,
-+                .use_internal_phy       = 1,
-+        },
-+        .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+                .force_speed_100        = 1,
-+                .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -707,6 +727,7 @@ static const struct board_info __initcon
-       &board_96348_D4PW,
-       &board_spw500v,
-       &board_96348sv,
-+      &board_V2500V_BB,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -746,6 +767,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-@@ -805,6 +827,22 @@ void __init board_bcm963xx_init(void)
-               val &= MPI_CSBASE_BASE_MASK;
-       }
-       boot_addr = (u8 *)KSEG1ADDR(val);
-+      pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+      /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+      /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+      /* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+      /* Do an early check of CFE and then select bank 0 */
-+
-+      if (boot_addr == (u8 *)0xbf800000) {
-+              u8 *tmp_boot_addr = (u8*)0xbfc00000;
-+
-+              bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
-+              if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
-+                      pr_info("V2500V: nvram bank 0\n");
-+                      boot_addr = tmp_boot_addr;
-+              }
-+      }
-       /* dump cfe version */
-       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -21,6 +21,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-+#include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_regs.h>
-@@ -247,6 +248,13 @@ int __init bcm63xx_flash_register(void)
-                       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-                       val &= MPI_CSBASE_BASE_MASK;
-+                      /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+                      /* Loading from CFE always uses Bank 0 */
-+                      if (!strcmp(board_get_name(), "V2500V_BB")) {
-+                              pr_info("V2500V: Start in Bank 0\n");
-+                              val = val + 0x400000; // Select Bank 0 start address
-+                      }
-+
-                       mtd_resources[0].start = val;
-                       mtd_resources[0].end = 0x1FFFFFFF;
-               }
diff --git a/target/linux/bcm63xx/patches-4.14/512-board_BTV2110.patch b/target/linux/bcm63xx/patches-4.14/512-board_BTV2110.patch
deleted file mode 100644 (file)
index 4c14ea4..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -208,6 +208,24 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+      .name                           = "V2110",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
-+
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -728,6 +746,7 @@ static const struct board_info __initcon
-       &board_spw500v,
-       &board_96348sv,
-       &board_V2500V_BB,
-+      &board_V2110,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -767,6 +786,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "bt,voyager-2110", .data = &board_V2110, },
-       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/bcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/bcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
deleted file mode 100644 (file)
index f98e19d..0000000
+++ /dev/null
@@ -1,215 +0,0 @@
-From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:55:52 +0100
-Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
-
----
- arch/mips/bcm63xx/boards/Kconfig         |    6 +
- arch/mips/bcm63xx/boards/Makefile        |    1 +
- arch/mips/bcm63xx/boards/board_common.c  |    2 +-
- arch/mips/bcm63xx/boards/board_common.h  |    6 +
- arch/mips/bcm63xx/boards/board_livebox.c |  215 ++++++++++++++++++++++++++++++
- 5 files changed, 229 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -13,4 +13,10 @@ config BOARD_BCM963XX
-       default y
-        help
-+config BOARD_LIVEBOX
-+      bool "Inventel Livebox(es) boards"
-+      select SSB
-+      help
-+        Inventel Livebox boards using the RedBoot bootloader.
-+
- endmenu
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,2 +1,3 @@
- obj-y                                 += board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)           += board_livebox.o
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -54,7 +54,7 @@ void __init board_prom_init(void)
-       if (fw_arg3 == CFE_EPTSEAL)
-               board_bcm963xx_init();
-       else
--              panic("unsupported bootloader detected");
-+              board_livebox_init();
- }
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -24,4 +24,10 @@ static inline void board_of_device_prese
- }
- #endif
-+#if defined(CONFIG_BOARD_LIVEBOX)
-+void board_livebox_init(void);
-+#else
-+static inline void board_livebox_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/input.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <board_bcm963xx.h>
-+
-+#include "board_common.h"
-+
-+#define PFX   "board_livebox: "
-+
-+static unsigned int mac_addr_used = 0;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox_blue5g = {
-+      .name                           = "Livebox-blue-5g",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+                .has_phy              = 1,
-+                .phy_id               = 31,
-+      },
-+
-+      .ephy_reset_gpio                = 6,
-+      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+      &board_livebox_blue5g
-+#endif
-+};
-+
-+static struct of_device_id const livebox_boards_dt[] = {
-+      { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, },
-+      { }
-+};
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+static int livebox_get_mac_address(u8 *mac)
-+{
-+      u8 *p;
-+      int count;
-+
-+      memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
-+
-+      p = mac + ETH_ALEN - 1;
-+      count = mac_addr_used;
-+
-+      while (count--) {
-+              do {
-+                      (*p)++;
-+                      if (*p != 0)
-+                              break;
-+                      p--;
-+              } while (p != mac);
-+      }
-+
-+      if (p == mac) {
-+              printk(KERN_ERR PFX "unable to fetch mac address\n");
-+              return -ENODEV;
-+      }
-+        mac_addr_used++;
-+
-+      return 0;
-+}
-+
-+/*
-+ * early init callback
-+ */
-+#define LIVEBOX_GPIO_DETECT_MASK      0x000000ff
-+#define LIVEBOX_BOOT_ADDR             0x1e400000
-+
-+#define LIVEBOX_HW_BLUE5G_9           0x90
-+
-+void __init board_livebox_init(void)
-+{
-+      u32 val;
-+      u8 hw_version;
-+      const struct board_info *board;
-+      const struct of_device_id *board_match;
-+
-+      /* find board by compat */
-+      board_match = bcm63xx_match_board(livebox_boards_dt);
-+      if (board_match) {
-+              board = board_match->data;
-+      } else {
-+              /* Get hardware version */
-+              val = bcm_gpio_readl(GPIO_CTL_LO_REG);
-+              val &= ~LIVEBOX_GPIO_DETECT_MASK;
-+              bcm_gpio_writel(val, GPIO_CTL_LO_REG);
-+
-+              hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG);
-+              hw_version &= LIVEBOX_GPIO_DETECT_MASK;
-+
-+              switch (hw_version) {
-+              case LIVEBOX_HW_BLUE5G_9:
-+                      printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
-+                      board = bcm963xx_boards[0];
-+                      break;
-+              default:
-+                      printk(KERN_INFO PFX "Unknown livebox version: %02x\n",
-+                             hw_version);
-+                      /* use default livebox configuration */
-+                      board = bcm963xx_boards[0];
-+                      break;
-+              }
-+      }
-+
-+      /* use default livebox configuration */
-+      board_early_setup(board, livebox_get_mac_address);
-+
-+      /* read base address of boot chip select (0) */
-+      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+      val &= MPI_CSBASE_BASE_MASK;
-+      if (val != LIVEBOX_BOOT_ADDR) {
-+              printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
-+                      val, LIVEBOX_BOOT_ADDR);
-+              bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff);
-+      }
-+}
diff --git a/target/linux/bcm63xx/patches-4.14/514-board_ct536_ct5621.patch b/target/linux/bcm63xx/patches-4.14/514-board_ct536_ct5621.patch
deleted file mode 100644 (file)
index acb533d..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -226,6 +226,33 @@ static struct board_info __initdata boar
- };
-+static struct board_info __initdata board_ct536_ct5621 = {
-+      .name                           = "CT536_CT5621",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 0,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -747,6 +774,7 @@ static const struct board_info __initcon
-       &board_96348sv,
-       &board_V2500V_BB,
-       &board_V2110,
-+      &board_ct536_ct5621,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -788,6 +816,8 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-       { .compatible = "bt,voyager-2110", .data = &board_V2110, },
-       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-+      { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
-+      { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
diff --git a/target/linux/bcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch b/target/linux/bcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch
deleted file mode 100644 (file)
index 9ccb29b..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -626,6 +626,7 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
- };
- /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/bcm63xx/patches-4.14/516-board_96348A-122.patch b/target/linux/bcm63xx/patches-4.14/516-board_96348A-122.patch
deleted file mode 100644 (file)
index a6de00d..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -253,6 +253,30 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_96348A_122 = {
-+      .name                           = "96348A-122",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -776,6 +800,7 @@ static const struct board_info __initcon
-       &board_V2500V_BB,
-       &board_V2110,
-       &board_ct536_ct5621,
-+      &board_96348A_122,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -818,6 +843,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "bt,voyager-2110", .data = &board_V2110, },
-       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-       { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
-+      { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
-       { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/bcm63xx/patches-4.14/519_board_CPVA502plus.patch b/target/linux/bcm63xx/patches-4.14/519_board_CPVA502plus.patch
deleted file mode 100644 (file)
index 25e7f9f..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -225,6 +225,33 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_CPVA502plus = {
-+      .name                           = "CPVA502+",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+      },
-+
-+      .ephy_reset_gpio                = 4,
-+      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
- static struct board_info __initdata board_ct536_ct5621 = {
-       .name                           = "CT536_CT5621",
-@@ -801,6 +828,7 @@ static const struct board_info __initcon
-       &board_V2110,
-       &board_ct536_ct5621,
-       &board_96348A_122,
-+      &board_CPVA502plus,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -853,6 +881,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+      { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, },
-       { .compatible = "telsey,magic", .data = &board_96348sv, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
diff --git a/target/linux/bcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/bcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
deleted file mode 100644 (file)
index 17087b3..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Wed, 20 Jan 2010 16:21:30 +0100
-Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
- 2 files changed, 97 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -792,6 +792,58 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-+ * known 6368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_96368mvwg = {
-+      .name                           = "96368MVWG",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port1",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port2",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0x12,
-+                              .name   = "port0",
-+                      },
-+
-+                      [5] = {
-+                              .used   = 1,
-+                              .phy_id = 0x11,
-+                              .name   = "port3",
-+                      },
-+              },
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6368 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -843,6 +895,10 @@ static const struct board_info __initcon
-       &board_HW553,
-       &board_spw303v,
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+      &board_96368mvwg,
-+#endif
- };
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -903,6 +959,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
- #endif
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -81,12 +81,25 @@ void __init board_early_setup(const stru
-               bcm63xx_pci_enabled = 1;
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G2_PCI;
-+
-+              if (BCMCPU_IS_6368())
-+                      val |= GPIO_MODE_6368_PCI_REQ1 |
-+                              GPIO_MODE_6368_PCI_GNT1 |
-+                              GPIO_MODE_6368_PCI_INTB |
-+                              GPIO_MODE_6368_PCI_REQ0 |
-+                              GPIO_MODE_6368_PCI_GNT0;
-       }
- #endif
-       if (board.has_pccard) {
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+
-+              if (BCMCPU_IS_6368())
-+                      val |= GPIO_MODE_6368_PCMCIA_CD1 |
-+                              GPIO_MODE_6368_PCMCIA_CD2 |
-+                              GPIO_MODE_6368_PCMCIA_VS1 |
-+                              GPIO_MODE_6368_PCMCIA_VS2;
-       }
-       if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/bcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/bcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch
deleted file mode 100644 (file)
index 03bda96..0000000
+++ /dev/null
@@ -1,73 +0,0 @@
-From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 4 Nov 2011 12:33:48 +0100
-Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   67 +++++++++++++++++++++++++++++
- 1 files changed, 67 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -841,6 +841,45 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
- };
-+
-+static struct board_info __initdata board_96368mvngr = {
-+      .name                           = "96368MVNgr",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- /*
-@@ -898,6 +937,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-+      &board_96368mvngr,
- #endif
- };
-@@ -959,6 +999,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/bcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
deleted file mode 100644 (file)
index e482b20..0000000
+++ /dev/null
@@ -1,45 +0,0 @@
-From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 10:52:25 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   77 +++++++++++++++++++++++++++++
- 1 files changed, 77 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -64,6 +64,33 @@ static struct board_info __initdata boar
-               .use_fullspeed          = 0,
-               .port_no                = 0,
-       },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
- };
- #endif /* CONFIG_BCM63XX_CPU_6328 */
diff --git a/target/linux/bcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/bcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
deleted file mode 100644 (file)
index 522d999..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 11:01:12 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   71 +++++++++++++++++++++++++++++
- 1 files changed, 71 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -92,6 +92,40 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_963281TAN = {
-+      .name                           = "963281TAN",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -918,6 +952,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_963281TAN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -974,6 +1009,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch b/target/linux/bcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch
deleted file mode 100644 (file)
index b91fff0..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 30 Apr 2012 09:10:51 +0200
-Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
- DSL-274xB rev F1
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
- 1 files changed, 104 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -126,6 +126,51 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_dsl_274xb_f1 = {
-+      .name                           = "AW4339U",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor         = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset = 0x7d1000,
-+                      .slot           = 0,
-+                      .led_pin        = -1,
-+                      .led_active_high        = 1,
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 1",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -953,6 +998,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_963281TAN,
-+      &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -1011,6 +1057,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+      { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-4.14/525-board_96348w3.patch b/target/linux/bcm63xx/patches-4.14/525-board_96348w3.patch
deleted file mode 100644 (file)
index 3a27db8..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -568,6 +568,24 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+/* NetGear DG834G v4 */
-+static struct board_info __initdata board_96348W3 = {
-+      .name                           = "96348W3",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+};
-+
- static struct board_info __initdata board_96348_D4PW = {
-       .name                           = "D-4P-W",
-       .expected_cpu_id                = 0x6348,
-@@ -1028,6 +1046,7 @@ static const struct board_info __initcon
-       &board_ct536_ct5621,
-       &board_96348A_122,
-       &board_CPVA502plus,
-+      &board_96348W3,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1083,6 +1102,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-+      { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
diff --git a/target/linux/bcm63xx/patches-4.14/526-board_CT6373-1.patch b/target/linux/bcm63xx/patches-4.14/526-board_CT6373-1.patch
deleted file mode 100644 (file)
index 0cfcc17..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -874,6 +874,30 @@ static struct board_info __initdata boar
-       .num_usbh_ports                 = 2,
- };
-+static struct board_info __initdata board_ct6373_1 = {
-+      .name                           = "CT6373-1",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_HW553 = {
-       .name                           = "HW553",
-       .expected_cpu_id                = 0x6358,
-@@ -1058,6 +1082,7 @@ static const struct board_info __initcon
-       &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-+      &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
- #endif
-@@ -1116,6 +1141,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+      { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
diff --git a/target/linux/bcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch b/target/linux/bcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch
deleted file mode 100644 (file)
index 45e8717..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -937,6 +937,33 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
- };
-+
-+/* D-Link DVA-G3810BN/TL */
-+static struct board_info __initdata board_DVAG3810BN = {
-+      .name                   = "DVAG3810BN",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_enet0              = 1,
-+      .has_enet1              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0              = 1,
-+      .has_pccard             = 1,
-+      .has_ehci0              = 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -1085,6 +1112,7 @@ static const struct board_info __initcon
-       &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
-+      &board_DVAG3810BN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-@@ -1144,6 +1172,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+      { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.14/528-board_nb6.patch b/target/linux/bcm63xx/patches-4.14/528-board_nb6.patch
deleted file mode 100644 (file)
index b4de7cb..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -966,6 +966,32 @@ static struct board_info __initdata boar
- };
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+static struct board_info __initdata board_nb6 = {
-+      .name                           = "NB6",
-+      .expected_cpu_id                = 0x6362,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name   = "RGMII",
-+                      },
-+              },
-+      },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6362 */
-+
- /*
-  * known 6368 boards
-  */
-@@ -1115,6 +1141,10 @@ static const struct board_info __initcon
-       &board_DVAG3810BN,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+      &board_nb6,
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-@@ -1183,6 +1213,9 @@ static struct of_device_id const bcm963x
-       { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+      { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/bcm63xx/patches-4.14/529-board_fast2604.patch b/target/linux/bcm63xx/patches-4.14/529-board_fast2604.patch
deleted file mode 100644 (file)
index 9e42c40..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -501,6 +501,22 @@ static struct board_info __initdata boar
-       .has_ehci0                      = 1,
- };
-+static struct board_info __initdata board_FAST2604 = {
-+      .name                                           = "F@ST2604",
-+      .expected_cpu_id                        = 0x6348,
-+
-+      .has_pci                                        = 1,
-+      .has_ohci0                                      = 1,
-+
-+      .has_enet1                                      = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
-       .name                           = "RTA1025W_16",
-       .expected_cpu_id                = 0x6348,
-@@ -1112,6 +1128,7 @@ static const struct board_info __initcon
-       &board_96348gw_10,
-       &board_96348gw_11,
-       &board_FAST2404,
-+      &board_FAST2604,
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
-@@ -1187,6 +1204,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-       { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+      { .compatible = "sagem,fast-2604", .data = &board_FAST2604, },
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
diff --git a/target/linux/bcm63xx/patches-4.14/530-board_A4001N1.patch b/target/linux/bcm63xx/patches-4.14/530-board_A4001N1.patch
deleted file mode 100644 (file)
index 0cecd9c..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -127,6 +127,49 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_A4001N1 = {
-+      .name                                   = "963281T_TEF",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+      },
-+};
-+
- static struct board_info __initdata board_dsl_274xb_f1 = {
-       .name                           = "AW4339U",
-       .expected_cpu_id                = 0x6328,
-@@ -1109,6 +1152,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_963281TAN,
-+      &board_A4001N1,
-       &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -1174,6 +1218,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
diff --git a/target/linux/bcm63xx/patches-4.14/531-board_AR-5387un.patch b/target/linux/bcm63xx/patches-4.14/531-board_AR-5387un.patch
deleted file mode 100644 (file)
index f2af2c5..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -93,6 +93,78 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ar5387un_fixups[] = {
-+      { .offset = 2, .value = 0x05bb },
-+      { .offset = 65, .value = 0x1204 },
-+      { .offset = 78, .value = 0x0303 },
-+      { .offset = 79, .value = 0x0202 },
-+      { .offset = 80, .value = 0xff02 },
-+      { .offset = 87, .value = 0x0315 },
-+      { .offset = 88, .value = 0x0315 },
-+      { .offset = 96, .value = 0x2048 },
-+      { .offset = 97, .value = 0xff11 },
-+      { .offset = 98, .value = 0x1567 },
-+      { .offset = 99, .value = 0xfb24 },
-+      { .offset = 100, .value = 0x3e3c },
-+      { .offset = 101, .value = 0x4038 },
-+      { .offset = 102, .value = 0xfe7f },
-+      { .offset = 103, .value = 0x1279 },
-+      { .offset = 112, .value = 0x2048 },
-+      { .offset = 113, .value = 0xff03 },
-+      { .offset = 114, .value = 0x154c },
-+      { .offset = 115, .value = 0xfb27 },
-+      { .offset = 116, .value = 0x3e3c },
-+      { .offset = 117, .value = 0x4038 },
-+      { .offset = 118, .value = 0xfe87 },
-+      { .offset = 119, .value = 0x1233 },
-+      { .offset = 203, .value = 0x2226 },
-+};
-+
-+static struct board_info __initdata board_AR5387un = {
-+      .name                                   = "96328A-1441N1",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ar5387un_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ar5387un_fixups),
-+      },
-+};
-+
- static struct board_info __initdata board_963281TAN = {
-       .name                           = "963281TAN",
-       .expected_cpu_id                = 0x6328,
-@@ -1151,6 +1223,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_AR5387un,
-       &board_963281TAN,
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-@@ -1221,6 +1294,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+      { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-4.14/532-board_AR-5381u.patch b/target/linux/bcm63xx/patches-4.14/532-board_AR-5381u.patch
deleted file mode 100644 (file)
index dc8efed..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -93,6 +93,60 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ar5381u_fixups[] = {
-+      { .offset = 97, .value = 0xfee5 },
-+      { .offset = 98, .value = 0x157c },
-+      { .offset = 99, .value = 0xfae7 },
-+      { .offset = 113, .value = 0xfefa },
-+      { .offset = 114, .value = 0x15d6 },
-+      { .offset = 115, .value = 0xfaf8 },
-+};
-+
-+static struct board_info __initdata board_AR5381u = {
-+      .name                                   = "96328A-1241N",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ar5381u_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ar5381u_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata ar5387un_fixups[] = {
-       { .offset = 2, .value = 0x05bb },
-       { .offset = 65, .value = 0x1204 },
-@@ -1223,6 +1277,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_AR5381u,
-       &board_AR5387un,
-       &board_963281TAN,
-       &board_A4001N1,
-@@ -1294,6 +1349,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+      { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
-       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif
diff --git a/target/linux/bcm63xx/patches-4.14/533-board_rta770bw.patch b/target/linux/bcm63xx/patches-4.14/533-board_rta770bw.patch
deleted file mode 100644 (file)
index d56df55..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -411,6 +411,20 @@ static struct board_info __initdata boar
-       .name                           = "96345GW2",
-       .expected_cpu_id                = 0x6345,
- };
-+
-+static struct board_info __initdata board_rta770bw = {
-+      .name                           = "RTA770BW",
-+      .expected_cpu_id                = 0x6345,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- /*
-@@ -1291,6 +1305,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-+      &board_rta770bw,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-@@ -1361,6 +1376,7 @@ static struct of_device_id const bcm963x
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-+      { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.14/534-board_hw556.patch b/target/linux/bcm63xx/patches-4.14/534-board_hw556.patch
deleted file mode 100644 (file)
index cf55255..0000000
+++ /dev/null
@@ -1,123 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,7 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/pci_ids.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -1123,6 +1124,92 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HW556_C = {
-+      .name                                   = "HW556_C",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0xeffe00,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+static struct board_info __initdata board_HW556_A = {
-+      .name                                   = "HW556_A",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset         = 0xf7e000,
-+                      .slot                   = 1,
-+                      .endian_check           = 1,
-+                      .led_pin                = 2,
-+                      .led_active_high        = 1,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+static struct board_info __initdata board_HW556_B = {
-+      .name                                   = "HW556_B",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset         = 0xefe000,
-+                      .slot                   = 1,
-+                      .endian_check           = 1,
-+                      .led_pin                = 2,
-+                      .led_active_high        = 1,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+
-  /* T-Home Speedport W 303V Typ B */
- static struct board_info __initdata board_spw303v = {
-       .name                   = "96358-502V",
-@@ -1341,6 +1428,9 @@ static const struct board_info __initcon
-       &board_nb4_fxc_r1,
-       &board_ct6373_1,
-       &board_HW553,
-+      &board_HW556_A,
-+      &board_HW556_B,
-+      &board_HW556_C,
-       &board_spw303v,
-       &board_DVAG3810BN,
- #endif
-@@ -1413,6 +1503,9 @@ static struct of_device_id const bcm963x
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-+      { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
-+      { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
-+      { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.14/535-board_rta770w.patch b/target/linux/bcm63xx/patches-4.14/535-board_rta770w.patch
deleted file mode 100644 (file)
index c78e59e..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -426,6 +426,25 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+// Actually this board is the very same as the rta770bw,
-+// where the additional 'b' within the name just
-+// just indicates 'Annex B'. The ADSL Modem itself is able
-+// to handle both Annex A as well as Annex B -
-+// the loaded firmware makes the only difference
-+static struct board_info __initdata board_rta770w = {
-+      .name                           = "RTA770W",
-+      .expected_cpu_id                = 0x6345,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- /*
-@@ -1393,6 +1412,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-       &board_rta770bw,
-+      &board_rta770w,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-@@ -1467,6 +1487,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6345
-       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-       { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
-+      { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.14/536-board_fast2704.patch b/target/linux/bcm63xx/patches-4.14/536-board_fast2704.patch
deleted file mode 100644 (file)
index 358e974..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Marcin Jurkowski <marcin1j@gmail.com>
-Date: Thu, 31 Oct 2013 22:33:10 +0000
-Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
- router
-
-This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
-router.
-It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
-modem equipped with 64 MiB RAM and 8 MiB flash.
-
-Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -341,6 +341,43 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_FAST2704V2 = {
-+      .name                           = "F@ST2704V2",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .has_usbd                       = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -1402,6 +1439,7 @@ static const struct board_info __initcon
-       &board_963281TAN,
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-+      &board_FAST2704V2,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -1477,6 +1515,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
-       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-+      { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-4.14/537-board_fast2504n.patch b/target/linux/bcm63xx/patches-4.14/537-board_fast2504n.patch
deleted file mode 100644 (file)
index ff04407..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Max Staudt <openwrt.max@enpas.org>
-Date: Wed, 15 Jan 2014 18:51:13 +0000
-Subject: [PATCH] bcm63xx: F@ST2504n board support (Linux-3.10.26)
-
-Signed-off-by: Max Staudt <openwrt.max@enpas.org>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1332,6 +1332,41 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_fast2504n = {
-+      .name                           = "F@ST2504n",
-+      .expected_cpu_id                = 0x6362,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- /*
-@@ -1495,6 +1530,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6362
-       &board_nb6,
-+      &board_fast2504n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-@@ -1576,6 +1612,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6362
-+      { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
-       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/bcm63xx/patches-4.14/555-board_96318ref.patch b/target/linux/bcm63xx/patches-4.14/555-board_96318ref.patch
deleted file mode 100644 (file)
index c9c532d..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -50,6 +50,55 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_3368 */
- /*
-+ * known 6318 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+static struct board_info __initdata board_96318ref = {
-+      .name                           = "96318REF",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6318 */
-+
-+/*
-  * known 6328 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6328
-@@ -1467,6 +1516,9 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_3368
-       &board_cvg834g,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+      &board_96318ref,
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_AR5381u,
-@@ -1544,6 +1596,9 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_3368
-       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+      { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
diff --git a/target/linux/bcm63xx/patches-4.14/556-board_96318ref_p300.patch b/target/linux/bcm63xx/patches-4.14/556-board_96318ref_p300.patch
deleted file mode 100644 (file)
index f4ff4fd..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -96,6 +96,50 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_96318ref_p300 = {
-+      .name                           = "96318REF_P300",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- /*
-@@ -1518,6 +1562,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6318
-       &board_96318ref,
-+      &board_96318ref_p300,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-@@ -1598,6 +1643,7 @@ static struct of_device_id const bcm963x
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6318
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-+      { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
diff --git a/target/linux/bcm63xx/patches-4.14/557-board_bcm963269bhr.patch b/target/linux/bcm63xx/patches-4.14/557-board_bcm963269bhr.patch
deleted file mode 100644 (file)
index d5af2f0..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1554,6 +1554,50 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- /*
-+ * known 63268/63269 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963269bhr = {
-+      .name                           = "963269BHR",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_pci                        = 1,
-+
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_63268 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -1634,6 +1678,9 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+      &board_963269bhr,
-+#endif
- };
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -1721,6 +1768,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+      { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
- #endif
- #endif /* CONFIG_OF */
-       { },
diff --git a/target/linux/bcm63xx/patches-4.14/558-board_AR1004G.patch b/target/linux/bcm63xx/patches-4.14/558-board_AR1004G.patch
deleted file mode 100644 (file)
index 85521b4..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-From: "mexit@o2.pl" <mexit@o2.pl>
-Date: Sun, 24 Nov 2013 21:33:38 +0000
-Subject: [PATCH 4/5] bcm63xx: add support for Asmax AR 1004g router
-
-Support for Asmax AR 1004g router
-
-Signed-off-by: Adrian Feliks <mexit@o2.pl>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -647,6 +647,21 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+static struct board_info __initdata board_96348gw_10_AR1004G = {
-+      .name                           = "AR1004G",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
-+
- /* BT Voyager 2110 */
- static struct board_info __initdata board_V2110 = {
-@@ -1649,6 +1664,7 @@ static const struct board_info __initcon
-       &board_96348A_122,
-       &board_CPVA502plus,
-       &board_96348W3,
-+      &board_96348gw_10_AR1004G,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1713,6 +1729,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-+      { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, },
-       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.14/559-board_vw6339gu.patch b/target/linux/bcm63xx/patches-4.14/559-board_vw6339gu.patch
deleted file mode 100644 (file)
index 355bdb2..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1610,6 +1610,51 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_vw6339gu = {
-+      .name                           = "VW6339GU",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "LAN2",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "LAN3",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "LAN4",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "LAN1",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 7,
-+                              .name   = "WAN",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- /*
-@@ -1696,6 +1741,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       &board_963269bhr,
-+      &board_vw6339gu,
- #endif
- };
-@@ -1786,6 +1832,7 @@ static struct of_device_id const bcm963x
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-+      { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
- #endif
- #endif /* CONFIG_OF */
-       { },
diff --git a/target/linux/bcm63xx/patches-4.14/560-board_963268gu_p300.patch b/target/linux/bcm63xx/patches-4.14/560-board_963268gu_p300.patch
deleted file mode 100644 (file)
index b8a2af4..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1572,6 +1572,64 @@ static struct board_info __initdata boar
-  * known 63268/63269 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963268bu_p300 = {
-+      .name                           = "963268BU_P300",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 17,
-+                              .name   = "FE1",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "GbE2",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0,
-+                              .name   = "GbE3",
-+                      },
-+
-+                      [5] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "GbE1",
-+                      },
-+
-+                      [6] = {
-+                              .used   = 1,
-+                              .phy_id = 24,
-+                              .name   = "GbE4",
-+                      },
-+
-+                      [7] = {
-+                              .used   = 1,
-+                              .phy_id = 25,
-+                              .name   = "GbE5",
-+                      },
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_963269bhr = {
-       .name                           = "963269BHR",
-       .expected_cpu_id                = 0x63268,
-@@ -1740,6 +1798,7 @@ static const struct board_info __initcon
-       &board_96368mvngr,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+      &board_963268bu_p300,
-       &board_963269bhr,
-       &board_vw6339gu,
- #endif
-@@ -1831,6 +1890,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+      { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
-       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-       { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
- #endif
diff --git a/target/linux/bcm63xx/patches-4.14/561-board_WAP-5813n.patch b/target/linux/bcm63xx/patches-4.14/561-board_WAP-5813n.patch
deleted file mode 100644 (file)
index 8b8b1ed..0000000
+++ /dev/null
@@ -1,75 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -13,6 +13,8 @@
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/pci_ids.h>
-+#include <linux/platform_data/b53.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -1566,6 +1568,47 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
- };
-+
-+static struct sprom_fixup __initdata wap5813n_fixups[] = {
-+      { .offset = 97, .value = 0xfeed },
-+      { .offset = 98, .value = 0x15d1 },
-+      { .offset = 99, .value = 0xfb0d },
-+      { .offset = 113, .value = 0xfef7 },
-+      { .offset = 114, .value = 0x15f7 },
-+      { .offset = 115, .value = 0xfb1a },
-+};
-+
-+static struct board_info __initdata board_WAP5813n = {
-+      .name                           = "96369R-1231N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [4] = {
-+                              .used = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name = "RGMII",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = wap5813n_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(wap5813n_fixups),
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- /*
-@@ -1796,6 +1839,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       &board_963268bu_p300,
-@@ -1888,6 +1932,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6368
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+      { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/bcm63xx/patches-4.14/562-board_VR-3025u.patch b/target/linux/bcm63xx/patches-4.14/562-board_VR-3025u.patch
deleted file mode 100644 (file)
index 36014ea..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1569,6 +1569,59 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+static struct sprom_fixup __initdata vr3025u_fixups[] = {
-+      { .offset = 97, .value = 0xfeb3 },
-+      { .offset = 98, .value = 0x1618 },
-+      { .offset = 99, .value = 0xfab0 },
-+      { .offset = 113, .value = 0xfed1 },
-+      { .offset = 114, .value = 0x1609 },
-+      { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025u = {
-+      .name                                   = "96368M-1541N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_enetsw                             = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vr3025u_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vr3025u_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -1839,6 +1892,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_VR3025u,
-       &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -1932,6 +1986,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6368
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+      { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/563-board_VR-3025un.patch b/target/linux/bcm63xx/patches-4.14/563-board_VR-3025un.patch
deleted file mode 100644 (file)
index a34b7a1..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1622,6 +1622,59 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata vr3025un_fixups[] = {
-+      { .offset = 97, .value = 0xfeb3 },
-+      { .offset = 98, .value = 0x1618 },
-+      { .offset = 99, .value = 0xfab0 },
-+      { .offset = 113, .value = 0xfed1 },
-+      { .offset = 114, .value = 0x1609 },
-+      { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025un = {
-+      .name                                   = "96368M-1341N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_enetsw                             = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vr3025un_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vr3025un_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -1893,6 +1946,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_VR3025u,
-+      &board_VR3025un,
-       &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -1987,6 +2041,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-+      { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch b/target/linux/bcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch
deleted file mode 100644 (file)
index 9e06802..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1578,6 +1578,48 @@ static struct sprom_fixup __initdata vr3
-       { .offset = 115, .value = 0xfad9 },
- };
-+static struct board_info __initdata board_P870HW51A_V2 = {
-+      .name                           = "P870HW-51a_v2",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_VR3025u = {
-       .name                                   = "96368M-1541N",
-       .expected_cpu_id                = 0x6368,
-@@ -1945,6 +1987,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-       &board_WAP5813n,
-@@ -2043,6 +2086,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/bcm63xx/patches-4.14/565-board_hw520.patch b/target/linux/bcm63xx/patches-4.14/565-board_hw520.patch
deleted file mode 100644 (file)
index 517df7d..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1264,6 +1264,36 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HW520 = {
-+      .name                           = "HW6358GW_B",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enet0                      = 1,
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_HW553 = {
-       .name                           = "HW553",
-       .expected_cpu_id                = 0x6358,
-@@ -1971,6 +2001,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-       &board_ct6373_1,
-+      &board_HW520,
-       &board_HW553,
-       &board_HW556_A,
-       &board_HW556_B,
-@@ -2063,6 +2094,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-+      { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-       { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
-       { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
diff --git a/target/linux/bcm63xx/patches-4.14/566-board_A4001N.patch b/target/linux/bcm63xx/patches-4.14/566-board_A4001N.patch
deleted file mode 100644 (file)
index 2dc61d5..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -349,6 +349,49 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_A4001N = {
-+      .name                           = "96328dg2x2",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+      },
-+};
-+
- static struct board_info __initdata board_A4001N1 = {
-       .name                                   = "963281T_TEF",
-       .expected_cpu_id                        = 0x6328,
-@@ -1952,6 +1995,7 @@ static const struct board_info __initcon
-       &board_AR5381u,
-       &board_AR5387un,
-       &board_963281TAN,
-+      &board_A4001N,
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-       &board_FAST2704V2,
-@@ -2040,6 +2084,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "adb,a4001n", .data = &board_A4001N, },
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/bcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch b/target/linux/bcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch
deleted file mode 100644 (file)
index b7e155d..0000000
+++ /dev/null
@@ -1,93 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -142,6 +142,74 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
-+      { .offset = 96, .value = 0x2046 },
-+      { .offset = 97, .value = 0xfe9d },
-+      { .offset = 98, .value = 0x1854 },
-+      { .offset = 99, .value = 0xfa59 },
-+      { .offset = 112, .value = 0x2046 },
-+      { .offset = 113, .value = 0xfe79 },
-+      { .offset = 114, .value = 0x17f5 },
-+      { .offset = 115, .value = 0xfa47 },
-+      { .offset = 161, .value = 0x2222 },
-+      { .offset = 162, .value = 0x2222 },
-+      { .offset = 169, .value = 0x2222 },
-+      { .offset = 170, .value = 0x2222 },
-+      { .offset = 171, .value = 0x5555 },
-+      { .offset = 172, .value = 0x5555 },
-+      { .offset = 173, .value = 0x4444 },
-+      { .offset = 174, .value = 0x4444 },
-+      { .offset = 175, .value = 0x5555 },
-+      { .offset = 176, .value = 0x5555 },
-+};
-+
-+static struct board_info __initdata board_dsl_2751b_d1 = {
-+      .name                           = "AW5200B",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = dsl2751b_e1_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- /*
-@@ -1989,6 +2057,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6318
-       &board_96318ref,
-       &board_96318ref_p300,
-+      &board_dsl_2751b_d1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-@@ -2082,6 +2151,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6318
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-+      { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/bcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch b/target/linux/bcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch
deleted file mode 100644 (file)
index 29263bc..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1710,6 +1710,30 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+static struct board_info __initdata board_DGND3700v1_3800B = {
-+      .name                           = "DGND3700v1_3800B",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [5] = {
-+                              .used  = 1,
-+                              .phy_id  = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name  = "RGMII",
-+                      },
-+              },
-+      },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
-       { .offset = 97, .value = 0xfeb3 },
-       { .offset = 98, .value = 0x1618 },
-@@ -2131,6 +2155,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_DGND3700v1_3800B,
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-@@ -2233,6 +2258,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/569-board_homehub2a.patch b/target/linux/bcm63xx/patches-4.14/569-board_homehub2a.patch
deleted file mode 100644 (file)
index 9909994..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1375,6 +1375,31 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_homehub2a = {
-+      .name                           = "HOMEHUB2A",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                   = SPROM_BCM4322,
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_HW520 = {
-       .name                           = "HW6358GW_B",
-       .expected_cpu_id                = 0x6358,
-@@ -2138,6 +2163,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-       &board_ct6373_1,
-+      &board_homehub2a,
-       &board_HW520,
-       &board_HW553,
-       &board_HW556_A,
-@@ -2247,6 +2273,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-       { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
-+      { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6362
-       { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
diff --git a/target/linux/bcm63xx/patches-4.14/570-board_HG655b.patch b/target/linux/bcm63xx/patches-4.14/570-board_HG655b.patch
deleted file mode 100644 (file)
index 7b4d1fc..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1759,6 +1759,52 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HG655b = {
-+      .name                           = "HW65x",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0x7c0000,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
-       { .offset = 97, .value = 0xfeb3 },
-       { .offset = 98, .value = 0x1618 },
-@@ -2182,6 +2228,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-+      &board_HG655b,
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-@@ -2285,6 +2332,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
diff --git a/target/linux/bcm63xx/patches-4.14/571-board_fast2704n.patch b/target/linux/bcm63xx/patches-4.14/571-board_fast2704n.patch
deleted file mode 100644 (file)
index fb84d8d..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -210,6 +210,45 @@ static struct board_info __initdata boar
-               .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
-       },
- };
-+
-+static struct board_info __initdata board_FAST2704N = {
-+      .name                           = "F@ST2704N",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- /*
-@@ -2153,6 +2192,7 @@ static const struct board_info __initcon
-       &board_96318ref,
-       &board_96318ref_p300,
-       &board_dsl_2751b_d1,
-+      &board_FAST2704N,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-@@ -2250,6 +2290,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
-+      { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/bcm63xx/patches-4.14/572-board_VR-3026e.patch b/target/linux/bcm63xx/patches-4.14/572-board_VR-3026e.patch
deleted file mode 100644 (file)
index dec8adf..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1992,6 +1992,59 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata vr3026e_fixups[] = {
-+      { .offset = 97, .value = 0xfeb3 },
-+      { .offset = 98, .value = 0x1618 },
-+      { .offset = 99, .value = 0xfab0 },
-+      { .offset = 113, .value = 0xfed1 },
-+      { .offset = 114, .value = 0x1609 },
-+      { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3026e = {
-+      .name                                   = "96368MT-1341N1",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_enetsw                             = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vr3026e_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vr3026e_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -2272,6 +2325,7 @@ static const struct board_info __initcon
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-+      &board_VR3026e,
-       &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -2372,6 +2426,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-+      { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/bcm63xx/patches-4.14/573-board_R5010UNv2.patch b/target/linux/bcm63xx/patches-4.14/573-board_R5010UNv2.patch
deleted file mode 100644 (file)
index ab3e6fe..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -623,6 +623,50 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_R5010UNV2 = {
-+      .name                                   = "96328ang",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+      },
-+};
-+
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -2256,6 +2300,7 @@ static const struct board_info __initcon
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-       &board_FAST2704V2,
-+      &board_R5010UNV2,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -2354,6 +2399,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
-       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-+      { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
-       { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-4.14/574-board_HG622.patch b/target/linux/bcm63xx/patches-4.14/574-board_HG622.patch
deleted file mode 100644 (file)
index 3a14751..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1888,6 +1888,52 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HG622 = {
-+      .name                           = "96368MVWG_hg622",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0xfa0000,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
-       { .offset = 97, .value = 0xfeb3 },
-       { .offset = 98, .value = 0x1618 },
-@@ -2366,6 +2412,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-+      &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-@@ -2474,6 +2521,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
diff --git a/target/linux/bcm63xx/patches-4.14/575-board_EVG2000.patch b/target/linux/bcm63xx/patches-4.14/575-board_EVG2000.patch
deleted file mode 100644 (file)
index 1619376..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1842,6 +1842,42 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata EVG2000_fixups[] = {
-+  { .offset = 219, .value = 0xec08 },
-+};
-+
-+static struct board_info __initdata board_EVG2000 = {
-+      .name                           = "96369PVG",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [5] = {
-+                              .used = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name = "RGMII",
-+                      },
-+              },
-+      },
-+      .use_fallback_sprom     = 1,
-+      .fallback_sprom = {
-+              .type                   = SPROM_BCM4322,
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+              .board_fixups           = EVG2000_fixups,
-+              .num_board_fixups       = ARRAY_SIZE(EVG2000_fixups),
-+      },
-+};
-+
- static struct board_info __initdata board_HG655b = {
-       .name                           = "HW65x",
-       .expected_cpu_id                = 0x6368,
-@@ -2412,6 +2448,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-+      &board_EVG2000,
-       &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-@@ -2524,6 +2561,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-+      { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/576-board_AV4202N.patch b/target/linux/bcm63xx/patches-4.14/576-board_AV4202N.patch
deleted file mode 100644 (file)
index c61fcdd..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1732,6 +1732,51 @@ static struct board_info __initdata boar
-  * known 6368 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_AV4202N = {
-+      .name                           = "96368_Swiss_S1",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+      .use_fallback_sprom     = 1,
-+      .fallback_sprom = {
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+      },
-+
-+};
-+
- static struct board_info __initdata board_96368mvwg = {
-       .name                           = "96368MVWG",
-       .expected_cpu_id                = 0x6368,
-@@ -2445,6 +2490,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      &board_AV4202N,
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-@@ -2552,6 +2598,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "adb,av4202n", .data = &board_AV4202N, },
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
diff --git a/target/linux/bcm63xx/patches-4.14/577-board_VH4032N.patch b/target/linux/bcm63xx/patches-4.14/577-board_VH4032N.patch
deleted file mode 100644 (file)
index baed99c..0000000
+++ /dev/null
@@ -1,125 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2216,6 +2216,106 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata vh4032n_fixups[] = {
-+      { .offset = 2, .value = 0x04d2 },
-+      { .offset = 4, .value = 0x4350 },
-+      { .offset = 65, .value = 0x1300 },
-+      { .offset = 68, .value = 0x0402 },
-+      { .offset = 70, .value = 0x0090 },
-+      { .offset = 71, .value = 0x4c19 },
-+      { .offset = 72, .value = 0x2345 },
-+      { .offset = 87, .value = 0x0315 },
-+      { .offset = 88, .value = 0x0315 },
-+      { .offset = 96, .value = 0x2048 },
-+      { .offset = 97, .value = 0xfed7 },
-+      { .offset = 98, .value = 0x15a6 },
-+      { .offset = 99, .value = 0xfaee },
-+      { .offset = 100, .value = 0x3e3a },
-+      { .offset = 101, .value = 0x3a36 },
-+      { .offset = 102, .value = 0xff7f },
-+      { .offset = 103, .value = 0x11b9 },
-+      { .offset = 104, .value = 0xfc53 },
-+      { .offset = 105, .value = 0xffe6 },
-+      { .offset = 106, .value = 0xfdd2 },
-+      { .offset = 107, .value = 0xfe49 },
-+      { .offset = 108, .value = 0xff6a },
-+      { .offset = 109, .value = 0x136e },
-+      { .offset = 110, .value = 0xfbed },
-+      { .offset = 111, .value = 0x0000 },
-+      { .offset = 112, .value = 0x2048 },
-+      { .offset = 113, .value = 0xfee2 },
-+      { .offset = 114, .value = 0x15e5 },
-+      { .offset = 115, .value = 0xfaed },
-+      { .offset = 116, .value = 0x3e3a },
-+      { .offset = 117, .value = 0x3a36 },
-+      { .offset = 118, .value = 0xffc8 },
-+      { .offset = 119, .value = 0x12b8 },
-+      { .offset = 120, .value = 0xfca1 },
-+      { .offset = 121, .value = 0xff9b },
-+      { .offset = 122, .value = 0x122a },
-+      { .offset = 123, .value = 0xfcc8 },
-+      { .offset = 124, .value = 0xff95 },
-+      { .offset = 125, .value = 0x146b },
-+      { .offset = 126, .value = 0xfbba },
-+      { .offset = 127, .value = 0x0000 },
-+      { .offset = 161, .value = 0x0000 },
-+      { .offset = 162, .value = 0x0000 },
-+      { .offset = 169, .value = 0x0000 },
-+      { .offset = 170, .value = 0x0000 },
-+      { .offset = 171, .value = 0x0000 },
-+      { .offset = 172, .value = 0x0000 },
-+      { .offset = 173, .value = 0x0000 },
-+      { .offset = 174, .value = 0x0000 },
-+      { .offset = 175, .value = 0x0000 },
-+      { .offset = 176, .value = 0x0000 },
-+      { .offset = 219, .value = 0x1108 },
-+};
-+
-+static struct board_info __initdata board_VH4032N = {
-+      .name                           = "VH4032N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "LAN4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "LAN3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "LAN2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "LAN1",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vh4032n_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vh4032n_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -2498,6 +2598,7 @@ static const struct board_info __initcon
-       &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-+      &board_VH4032N,
-       &board_VR3025u,
-       &board_VR3025un,
-       &board_VR3026e,
-@@ -2609,6 +2710,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
-+      { .compatible = "observa,vh4032n", .data = &board_VH4032N, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/578-board_R1000H.patch b/target/linux/bcm63xx/patches-4.14/578-board_R1000H.patch
deleted file mode 100644 (file)
index f2b2e1e..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2066,6 +2066,29 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_R1000H = {
-+      .name                           = "R1000H",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [5] = {
-+                              .used  = 1,
-+                              .phy_id  = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name  = "RGMII",
-+                      },
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_VR3025u = {
-       .name                                   = "96368M-1541N",
-       .expected_cpu_id                = 0x6368,
-@@ -2598,6 +2621,7 @@ static const struct board_info __initcon
-       &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-+      &board_R1000H,
-       &board_VH4032N,
-       &board_VR3025u,
-       &board_VR3025un,
-@@ -2699,6 +2723,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "actiontec,r1000h", .data = &board_R1000H, },
-       { .compatible = "adb,av4202n", .data = &board_AV4202N, },
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/bcm63xx/patches-4.14/579-board_AR-5315u.patch b/target/linux/bcm63xx/patches-4.14/579-board_AR-5315u.patch
deleted file mode 100644 (file)
index 0393d46..0000000
+++ /dev/null
@@ -1,86 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -143,6 +143,67 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ar5315u_fixups[] = {
-+      { .offset = 6, .value = 0x1c00 },
-+      { .offset = 65, .value = 0x1255 },
-+      { .offset = 97, .value = 0xfe55 },
-+      { .offset = 98, .value = 0x171d },
-+      { .offset = 99, .value = 0xfa42 },
-+      { .offset = 113, .value = 0xfeb7 },
-+      { .offset = 114, .value = 0x18cd },
-+      { .offset = 115, .value = 0xfa4f },
-+      { .offset = 162, .value = 0x6444 },
-+      { .offset = 170, .value = 0x6444 },
-+      { .offset = 172, .value = 0x6444 },
-+};
-+
-+static struct board_info __initdata board_AR5315u = {
-+      .name                           = "96318A-1441N1",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "LAN4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "LAN3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "LAN2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "LAN1",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ar5315u_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ar5315u_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
-       { .offset = 96, .value = 0x2046 },
-       { .offset = 97, .value = 0xfe9d },
-@@ -2538,6 +2599,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6318
-       &board_96318ref,
-       &board_96318ref_p300,
-+      &board_AR5315u,
-       &board_dsl_2751b_d1,
-       &board_FAST2704N,
- #endif
-@@ -2643,6 +2705,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6318
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-+      { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, },
-       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
-       { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif
diff --git a/target/linux/bcm63xx/patches-4.14/580-board_AD1018.patch b/target/linux/bcm63xx/patches-4.14/580-board_AD1018.patch
deleted file mode 100644 (file)
index a48ecf9..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -357,6 +357,73 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ad1018_fixups[] = {
-+      { .offset = 6, .value = 0x1c00 },
-+      { .offset = 65, .value = 0x1256 },
-+      { .offset = 96, .value = 0x2046 },
-+      { .offset = 97, .value = 0xfe69 },
-+      { .offset = 98, .value = 0x1726 },
-+      { .offset = 99, .value = 0xfa5c },
-+      { .offset = 112, .value = 0x2046 },
-+      { .offset = 113, .value = 0xfea8 },
-+      { .offset = 114, .value = 0x1978 },
-+      { .offset = 115, .value = 0xfa26 },
-+      { .offset = 161, .value = 0x2222 },
-+      { .offset = 169, .value = 0x2222 },
-+      { .offset = 171, .value = 0x2222 },
-+      { .offset = 173, .value = 0x2222 },
-+      { .offset = 174, .value = 0x4444 },
-+      { .offset = 175, .value = 0x2222 },
-+      { .offset = 176, .value = 0x4444 },
-+};
-+
-+static struct board_info __initdata board_AD1018 = {
-+      .name                                   = "96328avngr",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "FIBRE",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "LAN3",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "LAN2",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "LAN1",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ad1018_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ad1018_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata ar5381u_fixups[] = {
-       { .offset = 97, .value = 0xfee5 },
-       { .offset = 98, .value = 0x157c },
-@@ -2605,6 +2672,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_AD1018,
-       &board_AR5381u,
-       &board_AR5387un,
-       &board_963281TAN,
-@@ -2719,6 +2787,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-       { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
-       { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
-+      { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-4.14/598-board_sr102.patch b/target/linux/bcm63xx/patches-4.14/598-board_sr102.patch
deleted file mode 100644 (file)
index c8db6c1..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2654,6 +2654,49 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_BSKYB_63168 = {
-+      .name                           = "BSKYB_63168",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 0,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- /*
-@@ -2762,6 +2805,7 @@ static const struct board_info __initcon
-       &board_963268bu_p300,
-       &board_963269bhr,
-       &board_vw6339gu,
-+      &board_BSKYB_63168,
- #endif
- };
-@@ -2874,6 +2918,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
-       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-       { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
-+      { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
- #endif
- #endif /* CONFIG_OF */
-       { },
diff --git a/target/linux/bcm63xx/patches-4.14/800-wl_exports.patch b/target/linux/bcm63xx/patches-4.14/800-wl_exports.patch
deleted file mode 100644 (file)
index 5f5b1c2..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -24,6 +24,12 @@
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
-+/*
-+ * Required export for WL
-+ */
-+u32 nvram_buf[5] = { 0, cpu_to_le32(20), 0, 0, 0 };
-+EXPORT_SYMBOL(nvram_buf);
-+
- void __init bcm63xx_nvram_init(void *addr)
- {
-       u32 crc, expected_crc;
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
diff --git a/target/linux/bcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch b/target/linux/bcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch
deleted file mode 100644 (file)
index 11a8353..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -8,6 +8,7 @@
-  */
- #include <linux/init.h>
-+#include <linux/export.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/platform_device.h>
-@@ -387,7 +388,19 @@ struct fallback_sprom_match {
-       struct ssb_sprom sprom;
- };
--static struct fallback_sprom_match fallback_sprom;
-+struct fallback_sprom_match fallback_sprom;
-+
-+int bcm63xx_get_fallback_sprom(uint pci_bus, uint pci_slot, struct ssb_sprom *out)
-+{
-+      if (pci_bus != fallback_sprom.pci_bus ||
-+          pci_slot != fallback_sprom.pci_dev)
-+              pr_warn("fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+                      fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+                      pci_bus, pci_slot);
-+      memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-+      return 0;
-+}
-+EXPORT_SYMBOL(bcm63xx_get_fallback_sprom);
- #if defined(CONFIG_SSB_PCIHOST)
- int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
diff --git a/target/linux/bcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch b/target/linux/bcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch
deleted file mode 100644 (file)
index 2aca2f3..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
-From: Miguel GAIO <miguel.gaio@efixo.com>
-Date: Fri, 6 Jul 2012 14:12:33 +0200
-Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
-
----
- drivers/net/phy/rtl8367.c  |    5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/net/phy/rtl8367.c
-+++ b/drivers/net/phy/rtl8367.c
-@@ -146,6 +146,10 @@
- #define   RTL8367_EXT_RGMXF_TXDELAY_MASK      1
- #define   RTL8367_EXT_RGMXF_RXDELAY_MASK      0x7
-+#define RTL8367_PHY_AD_REG                    0x130f
-+#define    RTL8370_PHY_AD_DUMMY_1_OFFSET      5
-+#define    RTL8370_PHY_AD_DUMMY_1_MASK                0xe0
-+
- #define RTL8367_DI_FORCE_REG(_x)              (0x1310 + (_x))
- #define   RTL8367_DI_FORCE_MODE                       BIT(12)
- #define   RTL8367_DI_FORCE_NWAY                       BIT(7)
-@@ -897,6 +901,7 @@ static int rtl8367_extif_set_mode(struct
-       case RTL8367_EXTIF_MODE_RGMII_33V:
-               REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
-               REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
-+              REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
-               break;
-       case RTL8367_EXTIF_MODE_TMII_MAC:
diff --git a/target/linux/bcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch b/target/linux/bcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch
deleted file mode 100644 (file)
index 7a3c2f0..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-From ff3409ab17d56450943364ba49a16960e3cdda9b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 6 Apr 2014 22:33:16 +0200
-Subject: [RFC] jffs2: work around unaligned accesses failing on bcm63xx/smp
-
-Unligned memcpy_fromio randomly fails with an unaligned dst. Work around
-it by ensuring we are always doing aligned copies.
-
-Should fix filename corruption in jffs2 with SMP.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- fs/jffs2/nodelist.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/fs/jffs2/nodelist.h
-+++ b/fs/jffs2/nodelist.h
-@@ -259,7 +259,7 @@ struct jffs2_full_dirent
-       uint32_t ino; /* == zero for unlink */
-       unsigned int nhash;
-       unsigned char type;
--      unsigned char name[0];
-+      unsigned char name[0] __attribute__((aligned((sizeof(long)))));
- };
- /*
diff --git a/target/linux/bcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch b/target/linux/bcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch
deleted file mode 100644 (file)
index 2d990f7..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2239,6 +2239,10 @@ static int bcm_enetsw_open(struct net_de
-               rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-               rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+              if (BCMCPU_IS_63268()) {
-+                      rgmii_ctrl |= ENETSW_RGMII_CTRL_TIMING_SEL_EN;
-+                      rgmii_ctrl |= ENETSW_RGMII_CTRL_MII_OVERRIDE_EN;
-+              }
-               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-       }