target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -zImage.itb
  20         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := factory.ubi sysupgrade.bin
  27         IMAGE/factory.ubi := append-ubi
  28         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         cat $(IMAGE_KERNEL) > $@.$1
  47         dd if=$@.new bs=64 count=1 >> $@.$1
  48 endef
  49
  50 define Build/append-rutx-metadata
  51         echo \
  52                 '{ \
  53                         "device_code": [".*"], \
  54                         "hwver": [".*"], \
  55                         "batch": [".*"], \
  56                         "serial": [".*"], \
  57                         "supported_devices":["teltonika,rutx"] \
  58                 }' | fwtool -I - $@
  59 endef
  60
  61 define Build/copy-file
  62         cat "$(1)" > "$@"
  63 endef
  64
  65 define Build/mkmylofw_32m
  66         $(eval device_id=$(word 1,$(1)))
  67         $(eval revision=$(word 2,$(1)))
  68
  69         let \
  70                 size="$$(stat -c%s $@)" \
  71                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  72                 pad="(pad - (size % pad)) % pad" \
  73                 newsize='size + pad'; \
  74                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  75                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  76                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  77                 $@.new
  78         @mv $@.new $@
  79 endef
  80
  81 define Build/wac5xx-netgear-tar
  82         mkdir $@.tmp
  83         mv $@ $@.tmp/wac5xx-ubifs-root.img
  84         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  85         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  86         echo "WAC505_V9.9.9.9" > $@.tmp/version
  87         tar -C $@.tmp/ -cf $@ .
  88         rm -rf $@.tmp
  89 endef
  90
  91 define Build/qsdk-ipq-factory-nand-askey
  92         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  93                 askey_kernel $@.$1 \
  94                 askey_fs $(IMAGE_ROOTFS) \
  95                 ubifs $@
  96         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  97         @mv $@.new $@
  98 endef
  99
 100 define Build/qsdk-ipq-app-gpt
 101         cp $@ $@.tmp 2>/dev/null || true
 102         ptgen -g -o $@.tmp -a 1 -l 1024 \
 103                         -t 0x2e -N 0:HLOS -r -p 32M \
 104                         -t 0x83 -N rootfs -r -p 128M \
 105                                 -N rootfs_data -p 512M
 106         cat $@.tmp >> $@
 107         rm $@.tmp
 108 endef
 109
 110 define Build/SenaoFW
 111         -$(STAGING_DIR_HOST)/bin/mksenaofw \
 112                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
 113                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
 114                 -e $@ \
 115                 -o $@.new
 116         @cp $@.new $@
 117 endef
 118
 119 define Build/wrgg-image
 120         mkwrggimg -i $@ \
 121         -o $@.new \
 122         -d "$(WRGG_DEVNAME)" \
 123         -s "$(WRGG_SIGNATURE)" \
 124         -v "" -m "" -B ""
 125         mv $@.new $@
 126 endef
 127
 128 define Device/8dev_habanero-dvk
 129         $(call Device/FitImageLzma)
 130         DEVICE_VENDOR := 8devices
 131         DEVICE_MODEL := Habanero DVK
 132         IMAGE_SIZE := 30976k
 133         SOC := qcom-ipq4019
 134         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 135 endef
 136 TARGET_DEVICES += 8dev_habanero-dvk
 137
 138 define Device/8dev_jalapeno-common
 139         $(call Device/FitImage)
 140         $(call Device/UbiFit)
 141         BLOCKSIZE := 128k
 142         PAGESIZE := 2048
 143         SOC := qcom-ipq4018
 144 endef
 145
 146 define Device/8dev_jalapeno
 147         $(call Device/8dev_jalapeno-common)
 148         DEVICE_VENDOR := 8devices
 149         DEVICE_MODEL := Jalapeno
 150 endef
 151 TARGET_DEVICES += 8dev_jalapeno
 152
 153 define Device/alfa-network_ap120c-ac
 154         $(call Device/FitImage)
 155         $(call Device/UbiFit)
 156         DEVICE_VENDOR := ALFA Network
 157         DEVICE_MODEL := AP120C-AC
 158         SOC := qcom-ipq4018
 159         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 160         BLOCKSIZE := 128k
 161         PAGESIZE := 2048
 162         IMAGE_SIZE := 65536k
 163         IMAGES := factory.bin sysupgrade.bin
 164         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 165 endef
 166 TARGET_DEVICES += alfa-network_ap120c-ac
 167
 168 define Device/aruba_glenmorangie
 169         $(call Device/FitImageLzma)
 170         DEVICE_VENDOR := Aruba
 171         SOC := qcom-ipq4029
 172 endef
 173
 174 define Device/aruba_ap-303
 175         $(call Device/aruba_glenmorangie)
 176         DEVICE_MODEL := AP-303
 177 endef
 178 TARGET_DEVICES += aruba_ap-303
 179
 180 define Device/aruba_ap-303h
 181         $(call Device/aruba_glenmorangie)
 182         DEVICE_MODEL := AP-303H
 183 endef
 184 TARGET_DEVICES += aruba_ap-303h
 185
 186 define Device/aruba_ap-365
 187         $(call Device/aruba_glenmorangie)
 188         DEVICE_MODEL := AP-365
 189         DEVICE_PACKAGES := kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
 190 endef
 191 # Missing DSA Setup
 192 #TARGET_DEVICES += aruba_ap-365
 193
 194 define Device/asus_map-ac2200
 195         $(call Device/FitImageLzma)
 196         DEVICE_VENDOR := ASUS
 197         DEVICE_MODEL := Lyra (MAP-AC2200)
 198         SOC := qcom-ipq4019
 199         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 200 endef
 201 TARGET_DEVICES += asus_map-ac2200
 202
 203 # WARNING: this is an initramfs image that gets you half of the way there
 204 #          you need to delete the jffs2 ubi volume and sysupgrade to the final image
 205 # to get a "trx" you can flash via web UI for ac42u/ac58u:
 206 # - change call Device/FitImageLzma to Device/FitImage
 207 # - add the following below UIMAGE_NAME
 208 #   UIMAGE_MAGIC := 0x27051956
 209 #   IMAGES += factory.trx
 210 #   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
 211 define Device/asus_rt-ac42u
 212         $(call Device/FitImageLzma)
 213         DEVICE_VENDOR := ASUS
 214         DEVICE_MODEL := RT-AC42U
 215         DEVICE_ALT0_VENDOR := ASUS
 216         DEVICE_ALT0_MODEL := RT-ACRH17
 217         DEVICE_ALT1_VENDOR := ASUS
 218         DEVICE_ALT1_MODEL := RT-AC2200
 219         SOC := qcom-ipq4019
 220         BLOCKSIZE := 128k
 221         PAGESIZE := 2048
 222         IMAGE_SIZE := 20439364
 223         FILESYSTEMS := squashfs
 224 #       RT-AC82U is nowhere to be found online
 225 #       Rather, this device is a/k/a RT-AC42U
 226 #       But we'll go with what the vendor firmware has...
 227         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
 228         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
 229 endef
 230 TARGET_DEVICES += asus_rt-ac42u
 231
 232 define Device/asus_rt-ac58u
 233         $(call Device/FitImageLzma)
 234         DEVICE_VENDOR := ASUS
 235         DEVICE_MODEL := RT-AC58U
 236         DEVICE_ALT0_VENDOR := ASUS
 237         DEVICE_ALT0_MODEL := RT-ACRH13
 238         SOC := qcom-ipq4018
 239         BLOCKSIZE := 128k
 240         PAGESIZE := 2048
 241         IMAGE_SIZE := 20439364
 242         FILESYSTEMS := squashfs
 243 #       Someone - in their infinite wisdom - decided to put the firmware
 244 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 245 #       Since u-boot works with strings we either need another fixup step
 246 #       to add a version... or we are very careful not to add '\0' into that
 247 #       string and call it a day.... Yeah, we do the latter!
 248         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 249         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 250                 kmod-usb-ledtrig-usbport
 251 endef
 252 TARGET_DEVICES += asus_rt-ac58u
 253
 254 define Device/avm_fritzbox-4040
 255         $(call Device/FitImageLzma)
 256         DEVICE_VENDOR := AVM
 257         DEVICE_MODEL := FRITZ!Box 4040
 258         SOC := qcom-ipq4018
 259         BOARD_NAME := fritz4040
 260         IMAGE_SIZE := 29056k
 261         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 262         UBOOT_PARTITION_SIZE := 524288
 263         IMAGES += eva.bin
 264         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 265         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 266         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 267 endef
 268 TARGET_DEVICES += avm_fritzbox-4040
 269
 270 define Device/avm_fritzbox-7530
 271         $(call Device/FitImageLzma)
 272         DEVICE_VENDOR := AVM
 273         DEVICE_MODEL := FRITZ!Box 7530
 274         DEVICE_ALT0_VENDOR := AVM
 275         DEVICE_ALT0_MODEL := FRITZ!Box 7520
 276         SOC := qcom-ipq4019
 277         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 278 endef
 279 TARGET_DEVICES += avm_fritzbox-7530
 280
 281 define Device/avm_fritzrepeater-1200
 282         $(call Device/FitImageLzma)
 283         DEVICE_VENDOR := AVM
 284         DEVICE_MODEL := FRITZ!Repeater 1200
 285         SOC := qcom-ipq4019
 286         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 287 endef
 288 TARGET_DEVICES += avm_fritzrepeater-1200
 289
 290 define Device/avm_fritzrepeater-3000
 291         $(call Device/FitImageLzma)
 292         DEVICE_VENDOR := AVM
 293         DEVICE_MODEL := FRITZ!Repeater 3000
 294         SOC := qcom-ipq4019
 295         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 296 endef
 297 # Missing DSA Setup
 298 #TARGET_DEVICES += avm_fritzrepeater-3000
 299
 300 define Device/buffalo_wtr-m2133hp
 301         $(call Device/FitImage)
 302         $(call Device/UbiFit)
 303         DEVICE_VENDOR := Buffalo
 304         DEVICE_MODEL := WTR-M2133HP
 305         SOC := qcom-ipq4019
 306         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 307         BLOCKSIZE := 128k
 308         PAGESIZE := 2048
 309 endef
 310 # Missing DSA Setup
 311 #TARGET_DEVICES += buffalo_wtr-m2133hp
 312
 313 define Device/cellc_rtl30vw
 314         KERNEL_SUFFIX := -zImage.itb
 315         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 316         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 317         KERNEL_NAME := zImage
 318         KERNEL_IN_UBI :=
 319         IMAGES := factory.bin sysupgrade.bin
 320         IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
 321         IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 322         DEVICE_VENDOR := Cell C
 323         DEVICE_MODEL := RTL30VW
 324         SOC := qcom-ipq4019
 325         DEVICE_DTS_CONFIG := config@5
 326         KERNEL_INSTALL := 1
 327         KERNEL_SIZE := 4096k
 328         IMAGE_SIZE := 57344k
 329         BLOCKSIZE := 128k
 330         PAGESIZE := 2048
 331         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 332 endef
 333 TARGET_DEVICES += cellc_rtl30vw
 334
 335 define Device/cilab_meshpoint-one
 336         $(call Device/8dev_jalapeno-common)
 337         DEVICE_VENDOR := Crisis Innovation Lab
 338         DEVICE_MODEL := MeshPoint.One
 339         DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 340 endef
 341 # Missing DSA Setup
 342 #TARGET_DEVICES += cilab_meshpoint-one
 343
 344 define Device/compex_wpj419
 345         $(call Device/FitImage)
 346         $(call Device/UbiFit)
 347         DEVICE_VENDOR := Compex
 348         DEVICE_MODEL := WPJ419
 349         SOC := qcom-ipq4019
 350         DEVICE_DTS_CONFIG := config@12
 351         KERNEL_INSTALL := 1
 352         BLOCKSIZE := 128k
 353         PAGESIZE := 2048
 354         FILESYSTEMS := squashfs
 355 endef
 356 # Missing DSA Setup
 357 #TARGET_DEVICES += compex_wpj419
 358
 359 define Device/compex_wpj428
 360         $(call Device/FitImage)
 361         DEVICE_VENDOR := Compex
 362         DEVICE_MODEL := WPJ428
 363         SOC := qcom-ipq4028
 364         DEVICE_DTS_CONFIG := config@4
 365         BLOCKSIZE := 64k
 366         IMAGE_SIZE := 31232k
 367         KERNEL_SIZE := 4096k
 368         IMAGES += cpximg-6a04.bin
 369         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 370         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 371         DEVICE_PACKAGES := kmod-gpio-beeper
 372         DEFAULT := n
 373 endef
 374 TARGET_DEVICES += compex_wpj428
 375
 376 define Device/devolo_magic-2-wifi-next
 377         $(call Device/FitImage)
 378         DEVICE_VENDOR := devolo
 379         DEVICE_MODEL := Magic 2 WiFi next
 380         SOC := qcom-ipq4018
 381         KERNEL_SIZE := 4096k
 382
 383         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 384         # it will bootm it, just like we want for the initramfs.
 385         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 386                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 387
 388         IMAGE_SIZE := 26624k
 389         IMAGES := sysupgrade.bin
 390         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 391         DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 392         DEFAULT := n
 393 endef
 394 # Missing DSA Setup
 395 #TARGET_DEVICES += devolo_magic-2-wifi-next
 396
 397 define Device/dlink_dap-2610
 398         $(call Device/FitImageLzma)
 399         DEVICE_VENDOR := D-Link
 400         DEVICE_MODEL := DAP-2610
 401         SOC := qcom-ipq4018
 402         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 403         BLOCKSIZE := 64k
 404         WRGG_DEVNAME := /dev/mtdblock/8
 405         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 406         IMAGE_SIZE := 14080k
 407         IMAGES += factory.bin
 408         # Bootloader expects a special 160 byte header which is added by
 409         # wrgg-image.
 410         # Factory image size must be larger than 6MB, and size in wrgg header must
 411         # match actual factory image size to be flashable from D-Link http server.
 412         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 413         # cannot be part of the wrgg image. This is solved in the factory image by
 414         # having the rootfs at the end of the image (without pad-rootfs). And in
 415         # the sysupgrade image only the kernel is included in the wrgg checksum,
 416         # but this is not flashable from the D-link http server.
 417         # append-rootfs must start on an erase block boundary.
 418         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 419         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 420 endef
 421 TARGET_DEVICES += dlink_dap-2610
 422
 423 define Device/edgecore_ecw5211
 424         $(call Device/FitImage)
 425         $(call Device/UbiFit)
 426         DEVICE_VENDOR := Edgecore
 427         DEVICE_MODEL := ECW5211
 428         SOC := qcom-ipq4018
 429         BLOCKSIZE := 128k
 430         PAGESIZE := 2048
 431         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 432         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 433 endef
 434 TARGET_DEVICES += edgecore_ecw5211
 435
 436 define Device/edgecore_oap100
 437         $(call Device/FitImage)
 438         $(call Device/UbiFit)
 439         DEVICE_VENDOR := Edgecore
 440         DEVICE_MODEL := OAP100
 441         SOC := qcom-ipq4019
 442         BLOCKSIZE := 128k
 443         PAGESIZE := 2048
 444         IMAGES := sysupgrade.bin
 445         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 446         DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 447 endef
 448 # Missing DSA Setup
 449 #TARGET_DEVICES += edgecore_oap100
 450
 451 define Device/engenius_eap1300
 452         $(call Device/FitImage)
 453         DEVICE_VENDOR := EnGenius
 454         DEVICE_MODEL := EAP1300
 455         DEVICE_DTS_CONFIG := config@4
 456         BOARD_NAME := eap1300
 457         SOC := qcom-ipq4018
 458         KERNEL_SIZE := 5120k
 459         IMAGE_SIZE := 25344k
 460         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 461 endef
 462 # Missing DSA Setup
 463 #TARGET_DEVICES += engenius_eap1300
 464
 465 define Device/engenius_eap2200
 466         $(call Device/FitImage)
 467         $(call Device/UbiFit)
 468         DEVICE_VENDOR := EnGenius
 469         DEVICE_MODEL := EAP2200
 470         SOC := qcom-ipq4019
 471         BLOCKSIZE := 128k
 472         PAGESIZE := 2048
 473         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 474 endef
 475 # Missing DSA Setup
 476 #TARGET_DEVICES += engenius_eap2200
 477
 478 define Device/engenius_emd1
 479         $(call Device/FitImage)
 480         DEVICE_VENDOR := EnGenius
 481         DEVICE_MODEL := EMD1
 482         DEVICE_DTS_CONFIG := config@4
 483         SOC := qcom-ipq4018
 484         IMAGE_SIZE := 30720k
 485         IMAGES += factory.bin
 486         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 487         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 488 endef
 489 # Missing DSA Setup
 490 #TARGET_DEVICES += engenius_emd1
 491
 492 define Device/engenius_emr3500
 493         $(call Device/FitImage)
 494         DEVICE_VENDOR := EnGenius
 495         DEVICE_MODEL := EMR3500
 496         DEVICE_DTS_CONFIG := config@4
 497         SOC := qcom-ipq4018
 498         KERNEL_SIZE := 4096k
 499         IMAGE_SIZE := 30720k
 500         IMAGES += factory.bin
 501         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 502         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 503         DEFAULT := n
 504 endef
 505 # Missing DSA Setup
 506 #TARGET_DEVICES += engenius_emr3500
 507
 508 define Device/engenius_ens620ext
 509         $(call Device/FitImage)
 510         DEVICE_VENDOR := EnGenius
 511         DEVICE_MODEL := ENS620EXT
 512         SOC := qcom-ipq4018
 513         DEVICE_DTS_CONFIG := config@4
 514         BLOCKSIZE := 64k
 515         PAGESIZE := 256
 516         BOARD_NAME := ENS620EXT
 517         VENDOR_ID := 0x0101
 518         PRODUCT_ID := 0x79
 519         PRODUCT_ID_NEW := 0xA4
 520         DATECODE := 190507
 521         FW_VER := 3.1.2
 522         FW_VER_NEW := 3.5.6
 523         CW_VER := 1.8.99
 524         IMAGE_SIZE := 21312k
 525         KERNEL_SIZE := 5120k
 526         FILESYSTEMS := squashfs
 527         IMAGES += factory_30.bin factory_35.bin
 528         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 529         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 530         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 531 endef
 532 # Missing DSA Setup
 533 #TARGET_DEVICES += engenius_ens620ext
 534
 535 define Device/extreme-networks_ws-ap3915i
 536         $(call Device/FitImage)
 537         DEVICE_VENDOR := Extreme Networks
 538         DEVICE_MODEL := WS-AP3915i
 539         IMAGE_SIZE := 30080k
 540         SOC := qcom-ipq4029
 541         BLOCKSIZE := 128k
 542         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 543         DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i
 544 endef
 545 # Missing DSA Setup
 546 #TARGET_DEVICES += extreme-networks_ws-ap3915i
 547
 548 define Device/ezviz_cs-w3-wd1200g-eup
 549         $(call Device/FitImage)
 550         DEVICE_VENDOR := EZVIZ
 551         DEVICE_MODEL := CS-W3-WD1200G
 552         DEVICE_VARIANT := EUP
 553         IMAGE_SIZE := 14848k
 554         KERNEL_SIZE = 6m
 555         SOC := qcom-ipq4018
 556         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 557                 append-metadata
 558         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 559         DEVICE_COMPAT_VERSION := 2.0
 560         DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 561                 Upgrade via sysupgrade mechanism is not possible.
 562 endef
 563 # Missing DSA Setup
 564 #TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 565
 566 define Device/glinet_gl-a1300
 567         $(call Device/FitImage)
 568         $(call Device/UbiFit)
 569         DEVICE_VENDOR := GL.iNet
 570         DEVICE_MODEL := GL-A1300
 571         SOC := qcom-ipq4018
 572         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 573         BLOCKSIZE := 128k
 574         PAGESIZE := 2048
 575         IMAGE_SIZE := 131072k
 576         DEVICE_PACKAGE := ipq-wifi-glinet_gl-a1300
 577 endef
 578 TARGET_DEVICES += glinet_gl-a1300
 579
 580 define Device/glinet_gl-ap1300
 581         $(call Device/FitImage)
 582         $(call Device/UbiFit)
 583         DEVICE_VENDOR := GL.iNet
 584         DEVICE_MODEL := GL-AP1300
 585         SOC := qcom-ipq4018
 586         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 587         BLOCKSIZE := 128k
 588         PAGESIZE := 2048
 589         IMAGE_SIZE := 131072k
 590         KERNEL_INSTALL := 1
 591         DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 592 endef
 593 # Missing DSA Setup
 594 #TARGET_DEVICES += glinet_gl-ap1300
 595
 596 define Device/glinet_gl-b1300
 597         $(call Device/FitzImage)
 598         DEVICE_VENDOR := GL.iNet
 599         DEVICE_MODEL := GL-B1300
 600         BOARD_NAME := gl-b1300
 601         SOC := qcom-ipq4029
 602         KERNEL_SIZE := 4096k
 603         IMAGE_SIZE := 26624k
 604         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 605 endef
 606 TARGET_DEVICES += glinet_gl-b1300
 607
 608 define Device/glinet_gl-b2200
 609         $(call Device/FitzImage)
 610         DEVICE_VENDOR := GL.iNet
 611         DEVICE_MODEL := GL-B2200
 612         SOC := qcom-ipq4019
 613         DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
 614         KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 615         IMAGES := emmc.img.gz sysupgrade.bin
 616         IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
 617                 pad-to 1024k | append-kernel |\
 618                 pad-to 33792k | append-rootfs |\
 619                 append-metadata | gzip
 620         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 621         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
 622                 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 623 endef
 624 TARGET_DEVICES += glinet_gl-b2200
 625
 626 define Device/glinet_gl-s1300
 627         $(call Device/FitzImage)
 628         DEVICE_VENDOR := GL.iNet
 629         DEVICE_MODEL := GL-S1300
 630         SOC := qcom-ipq4029
 631         KERNEL_SIZE := 4096k
 632         IMAGE_SIZE := 26624k
 633         IMAGES := sysupgrade.bin
 634         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 635         DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
 636 endef
 637 # Missing DSA Setup
 638 #TARGET_DEVICES += glinet_gl-s1300
 639
 640 define Device/kernel-size-6350-8300
 641         DEVICE_COMPAT_VERSION := 2.0
 642         DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
 643         this OpenWrt version. Before continuing, you MUST issue either the \
 644         command "fw_setenv kernsize 500000" from the OpenWrt command line, \
 645         or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
 646         Instead of the sysupgrade image, you must then install the OpenWrt \
 647         factory image, setting the force flag and wiping the configuration. \
 648         (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
 649 endef
 650
 651 define Device/linksys_ea6350v3
 652         # The Linksys EA6350v3 has a uboot bootloader that does not
 653         # support either booting lzma kernel images nor booting UBI
 654         # partitions. This uboot, however, supports raw kernel images and
 655         # gzipped images.
 656         #
 657         # As configured by the OEM factory, the device will boot the kernel
 658         # from a fixed address with a fixed length of 3 MiB. Also, the
 659         # device has a hard-coded kernel command line that requires the
 660         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 661         # Oh... and the kernel partition overlaps with the rootfs
 662         # partition (the same for alt_kernel and alt_rootfs).
 663         #
 664         # If you are planing re-partitioning the device, you may want to
 665         # keep these details in mind:
 666         # 1. The kernel addresses you should honor are 0x00000000 and
 667         #    0x02800000 respectively.
 668         # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
 669         #    unless the uboot environment variable "kernsize" is increased.
 670         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 671         # 4. The kernel command line from uboot is harcoded to boot with
 672         #    rootfs either in mtd11 or mtd13.
 673         $(call Device/FitzImage)
 674         $(call Device/kernel-size-6350-8300)
 675         DEVICE_VENDOR := Linksys
 676         DEVICE_MODEL := EA6350
 677         DEVICE_VARIANT := v3
 678         SOC := qcom-ipq4018
 679         BLOCKSIZE := 128k
 680         PAGESIZE := 2048
 681         KERNEL_SIZE := 5120k
 682         IMAGE_SIZE := 35840k
 683         UBINIZE_OPTS := -E 5
 684         IMAGES += factory.bin
 685         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 686 endef
 687 TARGET_DEVICES += linksys_ea6350v3
 688
 689 define Device/linksys_ea8300
 690         $(call Device/FitzImage)
 691         $(call Device/kernel-size-6350-8300)
 692         DEVICE_VENDOR := Linksys
 693         DEVICE_MODEL := EA8300
 694         SOC := qcom-ipq4019
 695         KERNEL_SIZE := 5120k
 696         IMAGE_SIZE := 84992k
 697         BLOCKSIZE := 128k
 698         PAGESIZE := 2048
 699         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 700         IMAGES += factory.bin
 701         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 702         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 703 endef
 704 TARGET_DEVICES += linksys_ea8300
 705
 706 define Device/linksys_mr8300
 707         $(call Device/FitzImage)
 708         $(call Device/kernel-size-6350-8300)
 709         DEVICE_VENDOR := Linksys
 710         DEVICE_MODEL := MR8300
 711         SOC := qcom-ipq4019
 712         KERNEL_SIZE := 5120k
 713         IMAGE_SIZE := 84992k
 714         BLOCKSIZE := 128k
 715         PAGESIZE := 2048
 716         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 717         IMAGES += factory.bin
 718         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 719         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 720 endef
 721 TARGET_DEVICES += linksys_mr8300
 722
 723 define Device/linksys_whw01
 724         $(call Device/FitzImage)
 725         DEVICE_VENDOR := Linksys
 726         DEVICE_MODEL := WHW01
 727         KERNEL_SIZE := 6144k
 728         IMAGE_SIZE := 75776K
 729         SOC := qcom-ipq4018
 730         BLOCKSIZE := 128k
 731         PAGESIZE := 2048
 732         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 733         IMAGES += factory.bin
 734         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
 735         DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 736 endef
 737 TARGET_DEVICES += linksys_whw01
 738
 739 define Device/luma_wrtq-329acn
 740         $(call Device/FitImage)
 741         DEVICE_VENDOR := Luma Home
 742         DEVICE_MODEL := WRTQ-329ACN
 743         SOC := qcom-ipq4018
 744         DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 745         IMAGE_SIZE := 76632k
 746         BLOCKSIZE := 128k
 747         PAGESIZE := 2048
 748 endef
 749 TARGET_DEVICES += luma_wrtq-329acn
 750
 751 define Device/meraki_mr33
 752         $(call Device/FitImage)
 753         DEVICE_VENDOR := Cisco Meraki
 754         DEVICE_MODEL := MR33
 755         SOC := qcom-ipq4029
 756         BLOCKSIZE := 128k
 757         PAGESIZE := 2048
 758         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 759 endef
 760 TARGET_DEVICES += meraki_mr33
 761
 762 define Device/meraki_mr74
 763         $(call Device/FitImage)
 764         DEVICE_VENDOR := Cisco Meraki
 765         DEVICE_MODEL := MR74
 766         SOC := qcom-ipq4029
 767         BLOCKSIZE := 128k
 768         PAGESIZE := 2048
 769         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 770         DEVICE_DTS_CONFIG := config@3
 771 endef
 772 TARGET_DEVICES += meraki_mr74
 773
 774 define Device/mobipromo_cm520-79f
 775         $(call Device/FitzImage)
 776         $(call Device/UbiFit)
 777         DEVICE_VENDOR := MobiPromo
 778         DEVICE_MODEL := CM520-79F
 779         SOC := qcom-ipq4019
 780         BLOCKSIZE := 128k
 781         PAGESIZE := 2048
 782         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 783 endef
 784 TARGET_DEVICES += mobipromo_cm520-79f
 785
 786 define Device/netgear_ex61x0v2
 787         $(call Device/DniImage)
 788         DEVICE_VENDOR := NETGEAR
 789         DEVICE_DTS_CONFIG := config@4
 790         NETGEAR_BOARD_ID := EX6150v2series
 791         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 792         IMAGE_SIZE := 14400k
 793         SOC := qcom-ipq4018
 794 endef
 795
 796 define Device/netgear_ex6100v2
 797         $(call Device/netgear_ex61x0v2)
 798         DEVICE_MODEL := EX6100
 799         DEVICE_VARIANT := v2
 800 endef
 801 # Missing DSA Setup
 802 #TARGET_DEVICES += netgear_ex6100v2
 803
 804 define Device/netgear_ex6150v2
 805         $(call Device/netgear_ex61x0v2)
 806         DEVICE_MODEL := EX6150
 807         DEVICE_VARIANT := v2
 808 endef
 809 # Missing DSA Setup
 810 #TARGET_DEVICES += netgear_ex6150v2
 811
 812 define Device/netgear_orbi
 813         $(call Device/DniImage)
 814         SOC := qcom-ipq4019
 815         DEVICE_VENDOR := NETGEAR
 816         IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
 817                 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
 818                 append-rootfs | pad-rootfs | netgear-dni
 819         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
 820                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 821         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 822 endef
 823
 824 define Device/netgear_rbx50
 825         $(call Device/netgear_orbi)
 826         NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
 827         KERNEL_SIZE := 3932160
 828         ROOTFS_SIZE := 32243712
 829         IMAGE_SIZE := 36175872
 830 endef
 831
 832 define Device/netgear_rbr50
 833         $(call Device/netgear_rbx50)
 834         DEVICE_MODEL := RBR50
 835         DEVICE_VARIANT := v1
 836         NETGEAR_BOARD_ID := RBR50
 837 endef
 838 TARGET_DEVICES += netgear_rbr50
 839
 840 define Device/netgear_rbs50
 841         $(call Device/netgear_rbx50)
 842         DEVICE_MODEL := RBS50
 843         DEVICE_VARIANT := v1
 844         NETGEAR_BOARD_ID := RBS50
 845 endef
 846 TARGET_DEVICES += netgear_rbs50
 847
 848 define Device/netgear_srx60
 849         $(call Device/netgear_orbi)
 850         NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
 851         KERNEL_SIZE := 3932160
 852         ROOTFS_SIZE := 32243712
 853         IMAGE_SIZE := 36175872
 854 endef
 855
 856 define Device/netgear_srr60
 857         $(call Device/netgear_srx60)
 858         DEVICE_MODEL := SRR60
 859         NETGEAR_BOARD_ID := SRR60
 860 endef
 861 TARGET_DEVICES += netgear_srr60
 862
 863 define Device/netgear_srs60
 864         $(call Device/netgear_srx60)
 865         DEVICE_MODEL := SRS60
 866         NETGEAR_BOARD_ID := SRS60
 867 endef
 868 TARGET_DEVICES += netgear_srs60
 869
 870 define Device/netgear_wac510
 871         $(call Device/FitImage)
 872         $(call Device/UbiFit)
 873         DEVICE_VENDOR := Netgear
 874         DEVICE_MODEL := WAC510
 875         SOC := qcom-ipq4018
 876         DEVICE_DTS_CONFIG := config@5
 877         BLOCKSIZE := 128k
 878         PAGESIZE := 2048
 879         IMAGES += factory.tar
 880         IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
 881         DEVICE_PACKAGES := uboot-envtools
 882 endef
 883 TARGET_DEVICES += netgear_wac510
 884
 885 define Device/openmesh_a42
 886         $(call Device/FitImageLzma)
 887         DEVICE_VENDOR := OpenMesh
 888         DEVICE_MODEL := A42
 889         SOC := qcom-ipq4018
 890         DEVICE_DTS_CONFIG := config@om.a42
 891         BLOCKSIZE := 64k
 892         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 893         IMAGE_SIZE := 15616k
 894         IMAGES += factory.bin
 895         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 896         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 897 endef
 898 TARGET_DEVICES += openmesh_a42
 899
 900 define Device/openmesh_a62
 901         $(call Device/FitImageLzma)
 902         DEVICE_VENDOR := OpenMesh
 903         DEVICE_MODEL := A62
 904         SOC := qcom-ipq4019
 905         DEVICE_DTS_CONFIG := config@om.a62
 906         BLOCKSIZE := 64k
 907         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 908         IMAGE_SIZE := 15552k
 909         IMAGES += factory.bin
 910         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 911         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 912         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 913 endef
 914 TARGET_DEVICES += openmesh_a62
 915
 916 define Device/p2w_r619ac
 917         $(call Device/FitzImage)
 918         $(call Device/UbiFit)
 919         DEVICE_VENDOR := P&W
 920         DEVICE_MODEL := R619AC
 921         SOC := qcom-ipq4019
 922         DEVICE_DTS_CONFIG := config@10
 923         BLOCKSIZE := 128k
 924         PAGESIZE := 2048
 925         DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
 926 endef
 927
 928 define Device/p2w_r619ac-64m
 929         $(call Device/p2w_r619ac)
 930         DEVICE_VARIANT := 64M NAND
 931         IMAGES += factory.bin
 932         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 933 endef
 934 TARGET_DEVICES += p2w_r619ac-64m
 935
 936 define Device/p2w_r619ac-128m
 937         $(call Device/p2w_r619ac)
 938         DEVICE_VARIANT := 128M NAND
 939 endef
 940 TARGET_DEVICES += p2w_r619ac-128m
 941
 942 define Device/pakedge_wr-1
 943         $(call Device/FitImageLzma)
 944         DEVICE_VENDOR := Pakedge
 945         DEVICE_MODEL := WR-1
 946         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 947         DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
 948         SOC := qcom-ipq4018
 949         BLOCKSIZE := 64k
 950         IMAGE_SIZE := 31232k
 951         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
 952 endef
 953 TARGET_DEVICES += pakedge_wr-1
 954
 955 define Device/plasmacloud_pa1200
 956         $(call Device/FitImageLzma)
 957         DEVICE_VENDOR := Plasma Cloud
 958         DEVICE_MODEL := PA1200
 959         SOC := qcom-ipq4018
 960         DEVICE_DTS_CONFIG := config@pc.pa1200
 961         BLOCKSIZE := 64k
 962         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 963         IMAGE_SIZE := 15616k
 964         IMAGES += factory.bin
 965         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 966         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 967 endef
 968 TARGET_DEVICES += plasmacloud_pa1200
 969
 970 define Device/plasmacloud_pa2200
 971         $(call Device/FitImageLzma)
 972         DEVICE_VENDOR := Plasma Cloud
 973         DEVICE_MODEL := PA2200
 974         SOC := qcom-ipq4019
 975         DEVICE_DTS_CONFIG := config@pc.pa2200
 976         BLOCKSIZE := 64k
 977         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 978         IMAGE_SIZE := 15552k
 979         IMAGES += factory.bin
 980         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 981         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 982         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 983 endef
 984 TARGET_DEVICES += plasmacloud_pa2200
 985
 986 define Device/qcom_ap-dk01.1-c1
 987         DEVICE_VENDOR := Qualcomm Atheros
 988         DEVICE_MODEL := AP-DK01.1
 989         DEVICE_VARIANT := C1
 990         BOARD_NAME := ap-dk01.1-c1
 991         SOC := qcom-ipq4019
 992         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 993         KERNEL_INSTALL := 1
 994         KERNEL_SIZE := 4096k
 995         IMAGE_SIZE := 26624k
 996         $(call Device/FitImage)
 997         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 998         DEFAULT := n
 999 endef
1000 TARGET_DEVICES += qcom_ap-dk01.1-c1
1001
1002 define Device/qcom_ap-dk04.1-c1
1003         $(call Device/FitImage)
1004         $(call Device/UbiFit)
1005         DEVICE_VENDOR := Qualcomm Atheros
1006         DEVICE_MODEL := AP-DK04.1
1007         DEVICE_VARIANT := C1
1008         SOC := qcom-ipq4019
1009         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1010         KERNEL_INSTALL := 1
1011         KERNEL_SIZE := 4048k
1012         BLOCKSIZE := 128k
1013         PAGESIZE := 2048
1014         BOARD_NAME := ap-dk04.1-c1
1015         DEFAULT := n
1016 endef
1017 TARGET_DEVICES += qcom_ap-dk04.1-c1
1018
1019 define Device/qxwlan_e2600ac-c1
1020         $(call Device/FitImage)
1021         DEVICE_VENDOR := Qxwlan
1022         DEVICE_MODEL := E2600AC
1023         DEVICE_VARIANT := C1
1024         BOARD_NAME := e2600ac-c1
1025         SOC := qcom-ipq4019
1026         KERNEL_SIZE := 4096k
1027         IMAGE_SIZE := 31232k
1028         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1029         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
1030         DEFAULT := n
1031 endef
1032 # Missing DSA Setup
1033 #TARGET_DEVICES += qxwlan_e2600ac-c1
1034
1035 define Device/qxwlan_e2600ac-c2
1036         $(call Device/FitImage)
1037         $(call Device/UbiFit)
1038         DEVICE_VENDOR := Qxwlan
1039         DEVICE_MODEL := E2600AC
1040         DEVICE_VARIANT := C2
1041         SOC := qcom-ipq4019
1042         KERNEL_INSTALL := 1
1043         BLOCKSIZE := 128k
1044         PAGESIZE := 2048
1045         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
1046 endef
1047 # Missing DSA Setup
1048 #TARGET_DEVICES += qxwlan_e2600ac-c2
1049
1050 define Device/sony_ncp-hg100-cellular
1051         $(call Device/FitImage)
1052         DEVICE_VENDOR := Sony
1053         DEVICE_MODEL := NCP-HG100/Cellular
1054         DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1055         SOC := qcom-ipq4019
1056         KERNEL_SIZE := 8192k
1057         IMAGE_SIZE := 128m
1058         DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
1059                 kmod-fs-ext4 uqmi
1060 endef
1061 TARGET_DEVICES += sony_ncp-hg100-cellular
1062
1063 define Device/teltonika_rutx10
1064         $(call Device/FitImage)
1065         $(call Device/UbiFit)
1066         DEVICE_VENDOR := Teltonika
1067         DEVICE_MODEL := RUTX10
1068         SOC := qcom-ipq4018
1069         DEVICE_DTS_CONFIG := config@5
1070         KERNEL_INSTALL := 1
1071         BLOCKSIZE := 128k
1072         PAGESIZE := 2048
1073         FILESYSTEMS := squashfs
1074         IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1075         DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
1076 endef
1077 # Missing DSA Setup
1078 #TARGET_DEVICES += teltonika_rutx10
1079
1080 define Device/tel_x1pro
1081         $(call Device/FitImage)
1082         DEVICE_VENDOR := Telco
1083         DEVICE_MODEL := X1 Pro
1084         SOC := qcom-ipq4019
1085         KERNEL_SIZE := 4096k
1086         IMAGE_SIZE := 31232k
1087         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1088         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1089         DEFAULT := n
1090 endef
1091 # Missing DSA Setup
1092 #TARGET_DEVICES += tel_x1pro
1093
1094 define Device/unielec_u4019-32m
1095         $(call Device/FitImage)
1096         DEVICE_VENDOR := Unielec
1097         DEVICE_MODEL := U4019
1098         DEVICE_VARIANT := 32M
1099         BOARD_NAME := u4019-32m
1100         SOC := qcom-ipq4019
1101         KERNEL_SIZE := 4096k
1102         IMAGE_SIZE := 31232k
1103         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1104         DEFAULT := n
1105 endef
1106 # Missing DSA Setup
1107 #TARGET_DEVICES += unielec_u4019-32m
1108
1109 define Device/zte_mf28x_common
1110         $(call Device/FitzImage)
1111         DEVICE_VENDOR := ZTE
1112         SOC := qcom-ipq4019
1113         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1114         BLOCKSIZE := 128k
1115         PAGESIZE := 2048
1116         KERNEL_IN_UBI := 1
1117         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1118 endef
1119
1120 define Device/zte_mf286d
1121         $(call Device/zte_mf28x_common)
1122         DEVICE_MODEL := MF286D
1123 endef
1124 TARGET_DEVICES += zte_mf286d
1125
1126 define Device/zte_mf289f
1127         $(call Device/zte_mf28x_common)
1128         DEVICE_MODEL := MF289F
1129         DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1130 endef
1131 TARGET_DEVICES += zte_mf289f
1132
1133 define Device/zyxel_nbg6617
1134         $(call Device/FitImageLzma)
1135         DEVICE_VENDOR := ZyXEL
1136         DEVICE_MODEL := NBG6617
1137         SOC := qcom-ipq4018
1138         KERNEL_SIZE := 4096k
1139         ROOTFS_SIZE := 24960k
1140         RAS_BOARD := NBG6617
1141         RAS_ROOTFS_SIZE := 19840k
1142         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1143         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1144         IMAGES += factory.bin
1145 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1146 #       at least as large as the one of the initial firmware image (not the current
1147 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
1148 #       this minimum-size. However, the larger image can be flashed both ways.
1149         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1150         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1151         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1152 endef
1153 TARGET_DEVICES += zyxel_nbg6617
1154
1155 define Device/zyxel_wre6606
1156         $(call Device/FitImage)
1157         DEVICE_VENDOR := ZyXEL
1158         DEVICE_MODEL := WRE6606
1159         DEVICE_DTS_CONFIG := config@4
1160         SOC := qcom-ipq4018
1161         IMAGE_SIZE := 13184k
1162         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1163         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1164 endef
1165 # Missing DSA Setup
1166 #TARGET_DEVICES += zyxel_wre6606