target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -fit-uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -fit-uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -fit-zImage.itb
  20         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  27         IMAGE/nand-factory.ubi := append-ubi
  28         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         cat $(IMAGE_KERNEL) > $@.$1
  47         dd if=$@.new bs=64 count=1 >> $@.$1
  48 endef
  49
  50 define Build/append-rutx-metadata
  51         echo \
  52                 '{ \
  53                         "device_code": [".*"], \
  54                         "hwver": [".*"], \
  55                         "batch": [".*"], \
  56                         "serial": [".*"], \
  57                         "supported_devices":["teltonika,rutx"] \
  58                 }' | fwtool -I - $@
  59 endef
  60
  61 define Build/copy-file
  62         cat "$(1)" > "$@"
  63 endef
  64
  65 define Build/mkmylofw_32m
  66         $(eval device_id=$(word 1,$(1)))
  67         $(eval revision=$(word 2,$(1)))
  68
  69         let \
  70                 size="$$(stat -c%s $@)" \
  71                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  72                 pad="(pad - (size % pad)) % pad" \
  73                 newsize='size + pad'; \
  74                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  75                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  76                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  77                 $@.new
  78         @mv $@.new $@
  79 endef
  80
  81 define Build/wac5xx-netgear-tar
  82         mkdir $@.tmp
  83         mv $@ $@.tmp/wac5xx-ubifs-root.img
  84         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  85         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  86         echo "WAC505_V9.9.9.9" > $@.tmp/version
  87         tar -C $@.tmp/ -cf $@ .
  88         rm -rf $@.tmp
  89 endef
  90
  91 define Build/qsdk-ipq-factory-nand-askey
  92         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  93                 askey_kernel $@.$1 \
  94                 askey_fs $(IMAGE_ROOTFS) \
  95                 ubifs $@
  96         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  97         @mv $@.new $@
  98 endef
  99
 100 define Build/qsdk-ipq-app-gpt
 101         cp $@ $@.tmp 2>/dev/null || true
 102         ptgen -g -o $@.tmp -a 1 -l 1024 \
 103                         -t 0x2e -N 0:HLOS -r -p 32M \
 104                         -t 0x83 -N rootfs -r -p 128M \
 105                                 -N rootfs_data -p 512M
 106         cat $@.tmp >> $@
 107         rm $@.tmp
 108 endef
 109
 110 define Build/SenaoFW
 111         -$(STAGING_DIR_HOST)/bin/mksenaofw \
 112                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
 113                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
 114                 -e $@ \
 115                 -o $@.new
 116         @cp $@.new $@
 117 endef
 118
 119 define Build/wrgg-image
 120         mkwrggimg -i $@ \
 121         -o $@.new \
 122         -d "$(WRGG_DEVNAME)" \
 123         -s "$(WRGG_SIGNATURE)" \
 124         -v "" -m "" -B ""
 125         mv $@.new $@
 126 endef
 127
 128 define Device/8dev_habanero-dvk
 129         $(call Device/FitImageLzma)
 130         DEVICE_VENDOR := 8devices
 131         DEVICE_MODEL := Habanero DVK
 132         IMAGE_SIZE := 30976k
 133         SOC := qcom-ipq4019
 134         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 135 endef
 136 TARGET_DEVICES += 8dev_habanero-dvk
 137
 138 define Device/8dev_jalapeno-common
 139         $(call Device/FitImage)
 140         $(call Device/UbiFit)
 141         BLOCKSIZE := 128k
 142         PAGESIZE := 2048
 143         SOC := qcom-ipq4018
 144 endef
 145
 146 define Device/8dev_jalapeno
 147         $(call Device/8dev_jalapeno-common)
 148         DEVICE_VENDOR := 8devices
 149         DEVICE_MODEL := Jalapeno
 150 endef
 151 TARGET_DEVICES += 8dev_jalapeno
 152
 153 define Device/alfa-network_ap120c-ac
 154         $(call Device/FitImage)
 155         $(call Device/UbiFit)
 156         DEVICE_VENDOR := ALFA Network
 157         DEVICE_MODEL := AP120C-AC
 158         SOC := qcom-ipq4018
 159         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 160         BLOCKSIZE := 128k
 161         PAGESIZE := 2048
 162         IMAGE_SIZE := 65536k
 163         IMAGES := nand-factory.bin nand-sysupgrade.bin
 164         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 165 endef
 166 TARGET_DEVICES += alfa-network_ap120c-ac
 167
 168 define Device/aruba_glenmorangie
 169         $(call Device/FitImageLzma)
 170         DEVICE_VENDOR := Aruba
 171         SOC := qcom-ipq4029
 172 endef
 173
 174 define Device/aruba_ap-303
 175         $(call Device/aruba_glenmorangie)
 176         DEVICE_MODEL := AP-303
 177 endef
 178 TARGET_DEVICES += aruba_ap-303
 179
 180 define Device/aruba_ap-303h
 181         $(call Device/aruba_glenmorangie)
 182         DEVICE_MODEL := AP-303H
 183 endef
 184 # Missing DSA Setup
 185 #TARGET_DEVICES += aruba_ap-303h
 186
 187 define Device/aruba_ap-365
 188         $(call Device/aruba_glenmorangie)
 189         DEVICE_MODEL := AP-365
 190         DEVICE_PACKAGES := kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
 191 endef
 192 # Missing DSA Setup
 193 #TARGET_DEVICES += aruba_ap-365
 194
 195 define Device/asus_map-ac2200
 196         $(call Device/FitImageLzma)
 197         DEVICE_VENDOR := ASUS
 198         DEVICE_MODEL := Lyra (MAP-AC2200)
 199         SOC := qcom-ipq4019
 200         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 201 endef
 202 TARGET_DEVICES += asus_map-ac2200
 203
 204 # WARNING: this is an initramfs image that gets you half of the way there
 205 #          you need to delete the jffs2 ubi volume and sysupgrade to the final image
 206 # to get a "trx" you can flash via web UI for ac42u/ac58u:
 207 # - change call Device/FitImageLzma to Device/FitImage
 208 # - add the following below UIMAGE_NAME
 209 #   UIMAGE_MAGIC := 0x27051956
 210 #   IMAGES += factory.trx
 211 #   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
 212 define Device/asus_rt-ac42u
 213         $(call Device/FitImageLzma)
 214         DEVICE_VENDOR := ASUS
 215         DEVICE_MODEL := RT-AC42U
 216         DEVICE_ALT0_VENDOR := ASUS
 217         DEVICE_ALT0_MODEL := RT-ACRH17
 218         DEVICE_ALT1_VENDOR := ASUS
 219         DEVICE_ALT1_MODEL := RT-AC2200
 220         SOC := qcom-ipq4019
 221         BLOCKSIZE := 128k
 222         PAGESIZE := 2048
 223         IMAGE_SIZE := 20439364
 224         FILESYSTEMS := squashfs
 225 #       RT-AC82U is nowhere to be found online
 226 #       Rather, this device is a/k/a RT-AC42U
 227 #       But we'll go with what the vendor firmware has...
 228         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
 229         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
 230 endef
 231 # Missing DSA Setup
 232 #TARGET_DEVICES += asus_rt-ac42u
 233
 234 define Device/asus_rt-ac58u
 235         $(call Device/FitImageLzma)
 236         DEVICE_VENDOR := ASUS
 237         DEVICE_MODEL := RT-AC58U
 238         DEVICE_ALT0_VENDOR := ASUS
 239         DEVICE_ALT0_MODEL := RT-ACRH13
 240         SOC := qcom-ipq4018
 241         BLOCKSIZE := 128k
 242         PAGESIZE := 2048
 243         IMAGE_SIZE := 20439364
 244         FILESYSTEMS := squashfs
 245 #       Someone - in their infinite wisdom - decided to put the firmware
 246 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 247 #       Since u-boot works with strings we either need another fixup step
 248 #       to add a version... or we are very careful not to add '\0' into that
 249 #       string and call it a day.... Yeah, we do the latter!
 250         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 251         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 252                 kmod-usb-ledtrig-usbport
 253 endef
 254 TARGET_DEVICES += asus_rt-ac58u
 255
 256 define Device/avm_fritzbox-4040
 257         $(call Device/FitImageLzma)
 258         DEVICE_VENDOR := AVM
 259         DEVICE_MODEL := FRITZ!Box 4040
 260         SOC := qcom-ipq4018
 261         BOARD_NAME := fritz4040
 262         IMAGE_SIZE := 29056k
 263         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 264         UBOOT_PARTITION_SIZE := 524288
 265         IMAGES += eva.bin
 266         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 267         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 268         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 269 endef
 270 TARGET_DEVICES += avm_fritzbox-4040
 271
 272 define Device/avm_fritzbox-7530
 273         $(call Device/FitImageLzma)
 274         DEVICE_VENDOR := AVM
 275         DEVICE_MODEL := FRITZ!Box 7530
 276         DEVICE_ALT0_VENDOR := AVM
 277         DEVICE_ALT0_MODEL := FRITZ!Box 7520
 278         SOC := qcom-ipq4019
 279         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 280 endef
 281 TARGET_DEVICES += avm_fritzbox-7530
 282
 283 define Device/avm_fritzrepeater-1200
 284         $(call Device/FitImageLzma)
 285         DEVICE_VENDOR := AVM
 286         DEVICE_MODEL := FRITZ!Repeater 1200
 287         SOC := qcom-ipq4019
 288         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 289 endef
 290 TARGET_DEVICES += avm_fritzrepeater-1200
 291
 292 define Device/avm_fritzrepeater-3000
 293         $(call Device/FitImageLzma)
 294         DEVICE_VENDOR := AVM
 295         DEVICE_MODEL := FRITZ!Repeater 3000
 296         SOC := qcom-ipq4019
 297         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 298 endef
 299 # Missing DSA Setup
 300 #TARGET_DEVICES += avm_fritzrepeater-3000
 301
 302 define Device/buffalo_wtr-m2133hp
 303         $(call Device/FitImage)
 304         $(call Device/UbiFit)
 305         DEVICE_VENDOR := Buffalo
 306         DEVICE_MODEL := WTR-M2133HP
 307         SOC := qcom-ipq4019
 308         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 309         BLOCKSIZE := 128k
 310         PAGESIZE := 2048
 311 endef
 312 # Missing DSA Setup
 313 #TARGET_DEVICES += buffalo_wtr-m2133hp
 314
 315 define Device/cellc_rtl30vw
 316         KERNEL_SUFFIX := -fit-zImage.itb
 317         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 318         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 319         KERNEL_NAME := zImage
 320         KERNEL_IN_UBI :=
 321         IMAGES := nand-factory.bin nand-sysupgrade.bin
 322         IMAGE/nand-factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
 323         IMAGE/nand-sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 324         DEVICE_VENDOR := Cell C
 325         DEVICE_MODEL := RTL30VW
 326         SOC := qcom-ipq4019
 327         DEVICE_DTS_CONFIG := config@5
 328         KERNEL_INSTALL := 1
 329         KERNEL_SIZE := 4096k
 330         IMAGE_SIZE := 57344k
 331         BLOCKSIZE := 128k
 332         PAGESIZE := 2048
 333         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 334 endef
 335 TARGET_DEVICES += cellc_rtl30vw
 336
 337 define Device/cilab_meshpoint-one
 338         $(call Device/8dev_jalapeno-common)
 339         DEVICE_VENDOR := Crisis Innovation Lab
 340         DEVICE_MODEL := MeshPoint.One
 341         DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 342 endef
 343 # Missing DSA Setup
 344 #TARGET_DEVICES += cilab_meshpoint-one
 345
 346 define Device/compex_wpj419
 347         $(call Device/FitImage)
 348         $(call Device/UbiFit)
 349         DEVICE_VENDOR := Compex
 350         DEVICE_MODEL := WPJ419
 351         SOC := qcom-ipq4019
 352         DEVICE_DTS_CONFIG := config@12
 353         KERNEL_INSTALL := 1
 354         BLOCKSIZE := 128k
 355         PAGESIZE := 2048
 356         FILESYSTEMS := squashfs
 357 endef
 358 # Missing DSA Setup
 359 #TARGET_DEVICES += compex_wpj419
 360
 361 define Device/compex_wpj428
 362         $(call Device/FitImage)
 363         DEVICE_VENDOR := Compex
 364         DEVICE_MODEL := WPJ428
 365         SOC := qcom-ipq4028
 366         DEVICE_DTS_CONFIG := config@4
 367         BLOCKSIZE := 64k
 368         IMAGE_SIZE := 31232k
 369         KERNEL_SIZE := 4096k
 370         IMAGES += cpximg-6a04.bin
 371         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 372         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 373         DEVICE_PACKAGES := kmod-gpio-beeper
 374         DEFAULT := n
 375 endef
 376 TARGET_DEVICES += compex_wpj428
 377
 378 define Device/devolo_magic-2-wifi-next
 379         $(call Device/FitImage)
 380         DEVICE_VENDOR := devolo
 381         DEVICE_MODEL := Magic 2 WiFi next
 382         SOC := qcom-ipq4018
 383         KERNEL_SIZE := 4096k
 384
 385         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 386         # it will bootm it, just like we want for the initramfs.
 387         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 388                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 389
 390         IMAGE_SIZE := 26624k
 391         IMAGES := sysupgrade.bin
 392         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 393         DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 394         DEFAULT := n
 395 endef
 396 # Missing DSA Setup
 397 #TARGET_DEVICES += devolo_magic-2-wifi-next
 398
 399 define Device/dlink_dap-2610
 400         $(call Device/FitImageLzma)
 401         DEVICE_VENDOR := D-Link
 402         DEVICE_MODEL := DAP-2610
 403         SOC := qcom-ipq4018
 404         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 405         BLOCKSIZE := 64k
 406         WRGG_DEVNAME := /dev/mtdblock/8
 407         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 408         IMAGE_SIZE := 14080k
 409         IMAGES += factory.bin
 410         # Bootloader expects a special 160 byte header which is added by
 411         # wrgg-image.
 412         # Factory image size must be larger than 6MB, and size in wrgg header must
 413         # match actual factory image size to be flashable from D-Link http server.
 414         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 415         # cannot be part of the wrgg image. This is solved in the factory image by
 416         # having the rootfs at the end of the image (without pad-rootfs). And in
 417         # the sysupgrade image only the kernel is included in the wrgg checksum,
 418         # but this is not flashable from the D-link http server.
 419         # append-rootfs must start on an erase block boundary.
 420         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 421         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 422 endef
 423 # Missing DSA Setup
 424 #TARGET_DEVICES += dlink_dap-2610
 425
 426 define Device/edgecore_ecw5211
 427         $(call Device/FitImage)
 428         $(call Device/UbiFit)
 429         DEVICE_VENDOR := Edgecore
 430         DEVICE_MODEL := ECW5211
 431         SOC := qcom-ipq4018
 432         BLOCKSIZE := 128k
 433         PAGESIZE := 2048
 434         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 435         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 436 endef
 437 TARGET_DEVICES += edgecore_ecw5211
 438
 439 define Device/edgecore_oap100
 440         $(call Device/FitImage)
 441         $(call Device/UbiFit)
 442         DEVICE_VENDOR := Edgecore
 443         DEVICE_MODEL := OAP100
 444         SOC := qcom-ipq4019
 445         BLOCKSIZE := 128k
 446         PAGESIZE := 2048
 447         IMAGES := nand-sysupgrade.bin
 448         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 449         DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 450 endef
 451 # Missing DSA Setup
 452 #TARGET_DEVICES += edgecore_oap100
 453
 454 define Device/engenius_eap1300
 455         $(call Device/FitImage)
 456         DEVICE_VENDOR := EnGenius
 457         DEVICE_MODEL := EAP1300
 458         DEVICE_DTS_CONFIG := config@4
 459         BOARD_NAME := eap1300
 460         SOC := qcom-ipq4018
 461         KERNEL_SIZE := 5120k
 462         IMAGE_SIZE := 25344k
 463         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 464 endef
 465 # Missing DSA Setup
 466 #TARGET_DEVICES += engenius_eap1300
 467
 468 define Device/engenius_eap2200
 469         $(call Device/FitImage)
 470         $(call Device/UbiFit)
 471         DEVICE_VENDOR := EnGenius
 472         DEVICE_MODEL := EAP2200
 473         SOC := qcom-ipq4019
 474         BLOCKSIZE := 128k
 475         PAGESIZE := 2048
 476         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 477 endef
 478 # Missing DSA Setup
 479 #TARGET_DEVICES += engenius_eap2200
 480
 481 define Device/engenius_emd1
 482         $(call Device/FitImage)
 483         DEVICE_VENDOR := EnGenius
 484         DEVICE_MODEL := EMD1
 485         DEVICE_DTS_CONFIG := config@4
 486         SOC := qcom-ipq4018
 487         IMAGE_SIZE := 30720k
 488         IMAGES += factory.bin
 489         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 490         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 491 endef
 492 # Missing DSA Setup
 493 #TARGET_DEVICES += engenius_emd1
 494
 495 define Device/engenius_emr3500
 496         $(call Device/FitImage)
 497         DEVICE_VENDOR := EnGenius
 498         DEVICE_MODEL := EMR3500
 499         DEVICE_DTS_CONFIG := config@4
 500         SOC := qcom-ipq4018
 501         KERNEL_SIZE := 4096k
 502         IMAGE_SIZE := 30720k
 503         IMAGES += factory.bin
 504         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 505         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 506         DEFAULT := n
 507 endef
 508 # Missing DSA Setup
 509 #TARGET_DEVICES += engenius_emr3500
 510
 511 define Device/engenius_ens620ext
 512         $(call Device/FitImage)
 513         DEVICE_VENDOR := EnGenius
 514         DEVICE_MODEL := ENS620EXT
 515         SOC := qcom-ipq4018
 516         DEVICE_DTS_CONFIG := config@4
 517         BLOCKSIZE := 64k
 518         PAGESIZE := 256
 519         BOARD_NAME := ENS620EXT
 520         VENDOR_ID := 0x0101
 521         PRODUCT_ID := 0x79
 522         PRODUCT_ID_NEW := 0xA4
 523         DATECODE := 190507
 524         FW_VER := 3.1.2
 525         FW_VER_NEW := 3.5.6
 526         CW_VER := 1.8.99
 527         IMAGE_SIZE := 21312k
 528         KERNEL_SIZE := 5120k
 529         FILESYSTEMS := squashfs
 530         IMAGES += factory_30.bin factory_35.bin
 531         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 532         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 533         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 534 endef
 535 # Missing DSA Setup
 536 #TARGET_DEVICES += engenius_ens620ext
 537
 538 define Device/extreme-networks_ws-ap3915i
 539         $(call Device/FitImage)
 540         DEVICE_VENDOR := Extreme Networks
 541         DEVICE_MODEL := WS-AP3915i
 542         IMAGE_SIZE := 30080k
 543         SOC := qcom-ipq4029
 544         BLOCKSIZE := 128k
 545         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 546         DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i
 547 endef
 548 # Missing DSA Setup
 549 #TARGET_DEVICES += extreme-networks_ws-ap3915i
 550
 551 define Device/ezviz_cs-w3-wd1200g-eup
 552         $(call Device/FitImage)
 553         DEVICE_VENDOR := EZVIZ
 554         DEVICE_MODEL := CS-W3-WD1200G
 555         DEVICE_VARIANT := EUP
 556         IMAGE_SIZE := 14848k
 557         KERNEL_SIZE = 6m
 558         SOC := qcom-ipq4018
 559         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 560                 append-metadata
 561         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 562         DEVICE_COMPAT_VERSION := 2.0
 563         DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 564                 Upgrade via sysupgrade mechanism is not possible.
 565 endef
 566 # Missing DSA Setup
 567 #TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 568
 569 define Device/glinet_gl-ap1300
 570         $(call Device/FitImage)
 571         $(call Device/UbiFit)
 572         DEVICE_VENDOR := GL.iNet
 573         DEVICE_MODEL := GL-AP1300
 574         SOC := qcom-ipq4018
 575         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 576         BLOCKSIZE := 128k
 577         PAGESIZE := 2048
 578         IMAGE_SIZE := 131072k
 579         KERNEL_INSTALL := 1
 580         DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 581 endef
 582 # Missing DSA Setup
 583 #TARGET_DEVICES += glinet_gl-ap1300
 584
 585 define Device/glinet_gl-b1300
 586         $(call Device/FitzImage)
 587         DEVICE_VENDOR := GL.iNet
 588         DEVICE_MODEL := GL-B1300
 589         BOARD_NAME := gl-b1300
 590         SOC := qcom-ipq4029
 591         KERNEL_SIZE := 4096k
 592         IMAGE_SIZE := 26624k
 593         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 594 endef
 595 TARGET_DEVICES += glinet_gl-b1300
 596
 597 define Device/glinet_gl-b2200
 598         $(call Device/FitzImage)
 599         DEVICE_VENDOR := GL.iNet
 600         DEVICE_MODEL := GL-B2200
 601         SOC := qcom-ipq4019
 602         DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
 603         KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 604         IMAGES := emmc.img.gz sysupgrade.bin
 605         IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
 606                 pad-to 1024k | append-kernel |\
 607                 pad-to 33792k | append-rootfs |\
 608                 append-metadata | gzip
 609         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 610         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
 611                 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 612 endef
 613 TARGET_DEVICES += glinet_gl-b2200
 614
 615 define Device/glinet_gl-s1300
 616         $(call Device/FitzImage)
 617         DEVICE_VENDOR := GL.iNet
 618         DEVICE_MODEL := GL-S1300
 619         SOC := qcom-ipq4029
 620         KERNEL_SIZE := 4096k
 621         IMAGE_SIZE := 26624k
 622         IMAGES := sysupgrade.bin
 623         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 624         DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
 625 endef
 626 # Missing DSA Setup
 627 #TARGET_DEVICES += glinet_gl-s1300
 628
 629 define Device/linksys_ea6350v3
 630         # The Linksys EA6350v3 has a uboot bootloader that does not
 631         # support either booting lzma kernel images nor booting UBI
 632         # partitions. This uboot, however, supports raw kernel images and
 633         # gzipped images.
 634         #
 635         # As for the time of writing this, the device will boot the kernel
 636         # from a fixed address with a fixed length of 3MiB. Also, the
 637         # device has a hard-coded kernel command line that requieres the
 638         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 639         # Oh... and the kernel partition overlaps with the rootfs
 640         # partition (the same for alt_kernel and alt_rootfs).
 641         #
 642         # If you are planing re-partitioning the device, you may want to
 643         # keep those details in mind:
 644         # 1. The kernel adresses you should honor are 0x00000000 and
 645         #    0x02800000 respectively.
 646         # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
 647         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 648         # 4. The kernel command line from uboot is harcoded to boot with
 649         #    rootfs either in mtd11 or mtd13.
 650         $(call Device/FitzImage)
 651         DEVICE_VENDOR := Linksys
 652         DEVICE_MODEL := EA6350
 653         DEVICE_VARIANT := v3
 654         SOC := qcom-ipq4018
 655         BLOCKSIZE := 128k
 656         PAGESIZE := 2048
 657         KERNEL_SIZE := 3072k
 658         IMAGE_SIZE := 37888k
 659         UBINIZE_OPTS := -E 5
 660         IMAGES += factory.bin
 661         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 662         DEFAULT := n
 663 endef
 664 TARGET_DEVICES += linksys_ea6350v3
 665
 666 define Device/linksys_ea8300
 667         $(call Device/FitzImage)
 668         DEVICE_VENDOR := Linksys
 669         DEVICE_MODEL := EA8300
 670         SOC := qcom-ipq4019
 671         KERNEL_SIZE := 3072k
 672         IMAGE_SIZE := 87040k
 673         BLOCKSIZE := 128k
 674         PAGESIZE := 2048
 675         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 676         IMAGES += factory.bin
 677         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 678         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 679         DEFAULT := n
 680 endef
 681 TARGET_DEVICES += linksys_ea8300
 682
 683 define Device/linksys_mr8300
 684         $(call Device/FitzImage)
 685         DEVICE_VENDOR := Linksys
 686         DEVICE_MODEL := MR8300
 687         SOC := qcom-ipq4019
 688         KERNEL_SIZE := 3072k
 689         IMAGE_SIZE := 87040k
 690         BLOCKSIZE := 128k
 691         PAGESIZE := 2048
 692         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 693         IMAGES += factory.bin
 694         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 695         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 696         DEFAULT := n
 697 endef
 698 TARGET_DEVICES += linksys_mr8300
 699
 700 define Device/linksys_whw01-v1
 701         $(call Device/FitzImage)
 702         DEVICE_VENDOR := Linksys
 703         DEVICE_MODEL := WHW01
 704         DEVICE_VARIANT := v1
 705         KERNEL_SIZE := 6144k
 706         IMAGE_SIZE := 28704512  # 28032k minus linksys signature (256-bytes).
 707         SOC := qcom-ipq4018
 708         BLOCKSIZE := 128k
 709         PAGESIZE := 2048
 710         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 711         IMAGES += factory.bin
 712         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
 713                 append-ubi | linksys-image type=WHW01 | pad-to $$$$(PAGESIZE) | \
 714                 check-size
 715         DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 716 endef
 717 # Missing DSA Setup
 718 #TARGET_DEVICES += linksys_whw01-v1
 719
 720 define Device/luma_wrtq-329acn
 721         $(call Device/FitImage)
 722         DEVICE_VENDOR := Luma Home
 723         DEVICE_MODEL := WRTQ-329ACN
 724         SOC := qcom-ipq4018
 725         DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 726         IMAGE_SIZE := 76632k
 727         BLOCKSIZE := 128k
 728         PAGESIZE := 2048
 729 endef
 730 TARGET_DEVICES += luma_wrtq-329acn
 731
 732 define Device/meraki_mr33
 733         $(call Device/FitImage)
 734         DEVICE_VENDOR := Cisco Meraki
 735         DEVICE_MODEL := MR33
 736         SOC := qcom-ipq4029
 737         BLOCKSIZE := 128k
 738         PAGESIZE := 2048
 739         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 740 endef
 741 TARGET_DEVICES += meraki_mr33
 742
 743 define Device/meraki_mr74
 744         $(call Device/FitImage)
 745         DEVICE_VENDOR := Cisco Meraki
 746         DEVICE_MODEL := MR74
 747         SOC := qcom-ipq4029
 748         BLOCKSIZE := 128k
 749         PAGESIZE := 2048
 750         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 751         DEVICE_DTS_CONFIG := config@3
 752 endef
 753 TARGET_DEVICES += meraki_mr74
 754
 755 define Device/mobipromo_cm520-79f
 756         $(call Device/FitzImage)
 757         $(call Device/UbiFit)
 758         DEVICE_VENDOR := MobiPromo
 759         DEVICE_MODEL := CM520-79F
 760         SOC := qcom-ipq4019
 761         BLOCKSIZE := 128k
 762         PAGESIZE := 2048
 763         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 764 endef
 765 # Missing DSA Setup
 766 #TARGET_DEVICES += mobipromo_cm520-79f
 767
 768 define Device/netgear_ex61x0v2
 769         $(call Device/DniImage)
 770         DEVICE_VENDOR := NETGEAR
 771         DEVICE_DTS_CONFIG := config@4
 772         NETGEAR_BOARD_ID := EX6150v2series
 773         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 774         IMAGE_SIZE := 14400k
 775         SOC := qcom-ipq4018
 776 endef
 777
 778 define Device/netgear_ex6100v2
 779         $(call Device/netgear_ex61x0v2)
 780         DEVICE_MODEL := EX6100
 781         DEVICE_VARIANT := v2
 782 endef
 783 # Missing DSA Setup
 784 #TARGET_DEVICES += netgear_ex6100v2
 785
 786 define Device/netgear_ex6150v2
 787         $(call Device/netgear_ex61x0v2)
 788         DEVICE_MODEL := EX6150
 789         DEVICE_VARIANT := v2
 790 endef
 791 # Missing DSA Setup
 792 #TARGET_DEVICES += netgear_ex6150v2
 793
 794 define Device/netgear_orbi
 795         $(call Device/DniImage)
 796         SOC := qcom-ipq4019
 797         DEVICE_VENDOR := NETGEAR
 798         IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
 799                 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
 800                 append-rootfs | pad-rootfs | netgear-dni
 801         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
 802                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 803         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 804 endef
 805
 806 define Device/netgear_rbx50
 807         $(call Device/netgear_orbi)
 808         NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
 809         KERNEL_SIZE := 3932160
 810         ROOTFS_SIZE := 32243712
 811         IMAGE_SIZE := 36175872
 812 endef
 813
 814 define Device/netgear_rbr50
 815         $(call Device/netgear_rbx50)
 816         DEVICE_MODEL := RBR50
 817         DEVICE_VARIANT := v1
 818         NETGEAR_BOARD_ID := RBR50
 819 endef
 820 # Missing DSA Setup
 821 #TARGET_DEVICES += netgear_rbr50
 822
 823 define Device/netgear_rbs50
 824         $(call Device/netgear_rbx50)
 825         DEVICE_MODEL := RBS50
 826         DEVICE_VARIANT := v1
 827         NETGEAR_BOARD_ID := RBS50
 828 endef
 829 # Missing DSA Setup
 830 #TARGET_DEVICES += netgear_rbs50
 831
 832 define Device/netgear_srx60
 833         $(call Device/netgear_orbi)
 834         NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
 835         KERNEL_SIZE := 3932160
 836         ROOTFS_SIZE := 32243712
 837         IMAGE_SIZE := 36175872
 838 endef
 839
 840 define Device/netgear_srr60
 841         $(call Device/netgear_srx60)
 842         DEVICE_MODEL := SRR60
 843         NETGEAR_BOARD_ID := SRR60
 844 endef
 845 # Missing DSA Setup
 846 #TARGET_DEVICES += netgear_srr60
 847
 848 define Device/netgear_srs60
 849         $(call Device/netgear_srx60)
 850         DEVICE_MODEL := SRS60
 851         NETGEAR_BOARD_ID := SRS60
 852 endef
 853 # Missing DSA Setup
 854 #TARGET_DEVICES += netgear_srs60
 855
 856 define Device/netgear_wac510
 857         $(call Device/FitImage)
 858         $(call Device/UbiFit)
 859         DEVICE_VENDOR := Netgear
 860         DEVICE_MODEL := WAC510
 861         SOC := qcom-ipq4018
 862         DEVICE_DTS_CONFIG := config@5
 863         BLOCKSIZE := 128k
 864         PAGESIZE := 2048
 865         IMAGES += nand-factory.tar
 866         IMAGE/nand-factory.tar := append-ubi | wac5xx-netgear-tar
 867         DEVICE_PACKAGES := uboot-envtools
 868 endef
 869 TARGET_DEVICES += netgear_wac510
 870
 871 define Device/openmesh_a42
 872         $(call Device/FitImageLzma)
 873         DEVICE_VENDOR := OpenMesh
 874         DEVICE_MODEL := A42
 875         SOC := qcom-ipq4018
 876         DEVICE_DTS_CONFIG := config@om.a42
 877         BLOCKSIZE := 64k
 878         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 879         IMAGE_SIZE := 15616k
 880         IMAGES += factory.bin
 881         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 882         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 883 endef
 884 # Missing DSA Setup
 885 #TARGET_DEVICES += openmesh_a42
 886
 887 define Device/openmesh_a62
 888         $(call Device/FitImageLzma)
 889         DEVICE_VENDOR := OpenMesh
 890         DEVICE_MODEL := A62
 891         SOC := qcom-ipq4019
 892         DEVICE_DTS_CONFIG := config@om.a62
 893         BLOCKSIZE := 64k
 894         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 895         IMAGE_SIZE := 15552k
 896         IMAGES += factory.bin
 897         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 898         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 899         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 900 endef
 901 # Missing DSA Setup
 902 #TARGET_DEVICES += openmesh_a62
 903
 904 define Device/p2w_r619ac
 905         $(call Device/FitzImage)
 906         $(call Device/UbiFit)
 907         DEVICE_VENDOR := P&W
 908         DEVICE_MODEL := R619AC
 909         SOC := qcom-ipq4019
 910         DEVICE_DTS_CONFIG := config@10
 911         BLOCKSIZE := 128k
 912         PAGESIZE := 2048
 913         DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
 914 endef
 915
 916 define Device/p2w_r619ac-64m
 917         $(call Device/p2w_r619ac)
 918         DEVICE_VARIANT := 64M NAND
 919         IMAGES += nand-factory.bin
 920         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 921 endef
 922 TARGET_DEVICES += p2w_r619ac-64m
 923
 924 define Device/p2w_r619ac-128m
 925         $(call Device/p2w_r619ac)
 926         DEVICE_VARIANT := 128M NAND
 927 endef
 928 TARGET_DEVICES += p2w_r619ac-128m
 929
 930 define Device/pakedge_wr-1
 931         $(call Device/FitImageLzma)
 932         DEVICE_VENDOR := Pakedge
 933         DEVICE_MODEL := WR-1
 934         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 935         DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
 936         SOC := qcom-ipq4018
 937         BLOCKSIZE := 64k
 938         IMAGE_SIZE := 31232k
 939         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
 940 endef
 941 # Missing DSA Setup
 942 #TARGET_DEVICES += pakedge_wr-1
 943
 944 define Device/plasmacloud_pa1200
 945         $(call Device/FitImageLzma)
 946         DEVICE_VENDOR := Plasma Cloud
 947         DEVICE_MODEL := PA1200
 948         SOC := qcom-ipq4018
 949         DEVICE_DTS_CONFIG := config@pc.pa1200
 950         BLOCKSIZE := 64k
 951         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 952         IMAGE_SIZE := 15616k
 953         IMAGES += factory.bin
 954         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 955         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 956 endef
 957 # Missing DSA Setup
 958 #TARGET_DEVICES += plasmacloud_pa1200
 959
 960 define Device/plasmacloud_pa2200
 961         $(call Device/FitImageLzma)
 962         DEVICE_VENDOR := Plasma Cloud
 963         DEVICE_MODEL := PA2200
 964         SOC := qcom-ipq4019
 965         DEVICE_DTS_CONFIG := config@pc.pa2200
 966         BLOCKSIZE := 64k
 967         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 968         IMAGE_SIZE := 15552k
 969         IMAGES += factory.bin
 970         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 971         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 972         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 973 endef
 974 # Missing DSA Setup
 975 #TARGET_DEVICES += plasmacloud_pa2200
 976
 977 define Device/qcom_ap-dk01.1-c1
 978         DEVICE_VENDOR := Qualcomm Atheros
 979         DEVICE_MODEL := AP-DK01.1
 980         DEVICE_VARIANT := C1
 981         BOARD_NAME := ap-dk01.1-c1
 982         SOC := qcom-ipq4019
 983         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 984         KERNEL_INSTALL := 1
 985         KERNEL_SIZE := 4096k
 986         IMAGE_SIZE := 26624k
 987         $(call Device/FitImage)
 988         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 989         DEFAULT := n
 990 endef
 991 TARGET_DEVICES += qcom_ap-dk01.1-c1
 992
 993 define Device/qcom_ap-dk04.1-c1
 994         $(call Device/FitImage)
 995         $(call Device/UbiFit)
 996         DEVICE_VENDOR := Qualcomm Atheros
 997         DEVICE_MODEL := AP-DK04.1
 998         DEVICE_VARIANT := C1
 999         SOC := qcom-ipq4019
1000         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1001         KERNEL_INSTALL := 1
1002         KERNEL_SIZE := 4048k
1003         BLOCKSIZE := 128k
1004         PAGESIZE := 2048
1005         BOARD_NAME := ap-dk04.1-c1
1006         DEFAULT := n
1007 endef
1008 TARGET_DEVICES += qcom_ap-dk04.1-c1
1009
1010 define Device/qxwlan_e2600ac-c1
1011         $(call Device/FitImage)
1012         DEVICE_VENDOR := Qxwlan
1013         DEVICE_MODEL := E2600AC
1014         DEVICE_VARIANT := C1
1015         BOARD_NAME := e2600ac-c1
1016         SOC := qcom-ipq4019
1017         KERNEL_SIZE := 4096k
1018         IMAGE_SIZE := 31232k
1019         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1020         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
1021         DEFAULT := n
1022 endef
1023 # Missing DSA Setup
1024 #TARGET_DEVICES += qxwlan_e2600ac-c1
1025
1026 define Device/qxwlan_e2600ac-c2
1027         $(call Device/FitImage)
1028         $(call Device/UbiFit)
1029         DEVICE_VENDOR := Qxwlan
1030         DEVICE_MODEL := E2600AC
1031         DEVICE_VARIANT := C2
1032         SOC := qcom-ipq4019
1033         KERNEL_INSTALL := 1
1034         BLOCKSIZE := 128k
1035         PAGESIZE := 2048
1036         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
1037 endef
1038 # Missing DSA Setup
1039 #TARGET_DEVICES += qxwlan_e2600ac-c2
1040
1041 define Device/sony_ncp-hg100-cellular
1042         $(call Device/FitImage)
1043         DEVICE_VENDOR := Sony
1044         DEVICE_MODEL := NCP-HG100/Cellular
1045         DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1046         SOC := qcom-ipq4019
1047         KERNEL_SIZE := 8192k
1048         IMAGE_SIZE := 128m
1049         DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
1050                 kmod-fs-ext4 uqmi
1051 endef
1052 # Missing DSA Setup
1053 #TARGET_DEVICES += sony_ncp-hg100-cellular
1054
1055 define Device/teltonika_rutx10
1056         $(call Device/FitImage)
1057         $(call Device/UbiFit)
1058         DEVICE_VENDOR := Teltonika
1059         DEVICE_MODEL := RUTX10
1060         SOC := qcom-ipq4018
1061         DEVICE_DTS_CONFIG := config@5
1062         KERNEL_INSTALL := 1
1063         BLOCKSIZE := 128k
1064         PAGESIZE := 2048
1065         FILESYSTEMS := squashfs
1066         IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1067         DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
1068 endef
1069 # Missing DSA Setup
1070 #TARGET_DEVICES += teltonika_rutx10
1071
1072 define Device/tel_x1pro
1073         $(call Device/FitImage)
1074         DEVICE_VENDOR := Telco
1075         DEVICE_MODEL := X1 Pro
1076         SOC := qcom-ipq4019
1077         KERNEL_SIZE := 4096k
1078         IMAGE_SIZE := 31232k
1079         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1080         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1081         DEFAULT := n
1082 endef
1083 # Missing DSA Setup
1084 #TARGET_DEVICES += tel_x1pro
1085
1086 define Device/unielec_u4019-32m
1087         $(call Device/FitImage)
1088         DEVICE_VENDOR := Unielec
1089         DEVICE_MODEL := U4019
1090         DEVICE_VARIANT := 32M
1091         BOARD_NAME := u4019-32m
1092         SOC := qcom-ipq4019
1093         KERNEL_SIZE := 4096k
1094         IMAGE_SIZE := 31232k
1095         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1096         DEFAULT := n
1097 endef
1098 # Missing DSA Setup
1099 #TARGET_DEVICES += unielec_u4019-32m
1100
1101 define Device/zte_mf28x_common
1102         $(call Device/FitzImage)
1103         DEVICE_VENDOR := ZTE
1104         SOC := qcom-ipq4019
1105         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1106         BLOCKSIZE := 128k
1107         PAGESIZE := 2048
1108         KERNEL_IN_UBI := 1
1109         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1110 endef
1111
1112 define Device/zte_mf286d
1113         $(call Device/zte_mf28x_common)
1114         DEVICE_MODEL := MF286D
1115 endef
1116 TARGET_DEVICES += zte_mf286d
1117
1118 define Device/zte_mf289f
1119         $(call Device/zte_mf28x_common)
1120         DEVICE_MODEL := MF289F
1121         DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1122 endef
1123 # Missing DSA Setup
1124 #TARGET_DEVICES += zte_mf289f
1125
1126 define Device/zyxel_nbg6617
1127         $(call Device/FitImageLzma)
1128         DEVICE_VENDOR := ZyXEL
1129         DEVICE_MODEL := NBG6617
1130         SOC := qcom-ipq4018
1131         KERNEL_SIZE := 4096k
1132         ROOTFS_SIZE := 24960k
1133         RAS_BOARD := NBG6617
1134         RAS_ROOTFS_SIZE := 19840k
1135         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1136         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1137         IMAGES += factory.bin
1138 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1139 #       at least as large as the one of the initial firmware image (not the current
1140 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
1141 #       this minimum-size. However, the larger image can be flashed both ways.
1142         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1143         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1144         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1145 endef
1146 TARGET_DEVICES += zyxel_nbg6617
1147
1148 define Device/zyxel_wre6606
1149         $(call Device/FitImage)
1150         DEVICE_VENDOR := ZyXEL
1151         DEVICE_MODEL := WRE6606
1152         DEVICE_DTS_CONFIG := config@4
1153         SOC := qcom-ipq4018
1154         IMAGE_SIZE := 13184k
1155         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1156         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1157 endef
1158 # Missing DSA Setup
1159 #TARGET_DEVICES += zyxel_wre6606