target/linux/brcm63xx/dts/bcm6358.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "brcm,bcm6358";
   5
   6         aliases {
   7                 pflash = &pflash;
   8                 pinctrl = &pinctrl;
   9                 serial0 = &uart0;
  10                 serial1 = &uart1;
  11                 spi0 = &lsspi;
  12         };
  13
  14         cpus {
  15                 #address-cells = <1>;
  16                 #size-cells = <0>;
  17
  18                 cpu@0 {
  19                         compatible = "brcm,bmips4350", "mips,mips4Kc";
  20                         device_type = "cpu";
  21                         reg = <0>;
  22                 };
  23
  24                 cpu@1 {
  25                         compatible = "brcm,bmips4350", "mips,mips4Kc";
  26                         device_type = "cpu";
  27                         reg = <1>;
  28                 };
  29         };
  30
  31         cpu_intc: interrupt-controller {
  32                 #address-cells = <0>;
  33                 compatible = "mti,cpu-interrupt-controller";
  34
  35                 interrupt-controller;
  36                 #interrupt-cells = <1>;
  37         };
  38
  39         memory { device_type = "memory"; reg = <0 0>; };
  40
  41         pflash: nor@1e000000 {
  42                 compatible = "cfi-flash";
  43                 reg = <0x1e000000 0x2000000>;
  44                 bank-width = <2>;
  45                 #address-cells = <1>;
  46                 #size-cells = <1>;
  47
  48                 status = "disabled";
  49         };
  50
  51         ubus@fff00000 {
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54                 ranges;
  55                 compatible = "simple-bus";
  56                 interrupt-parent = <&periph_intc>;
  57
  58                 periph_intc: interrupt-controller@fffe000c {
  59                         compatible = "brcm,bcm6345-l1-intc";
  60                         reg = <0xfffe000c 0x8>,
  61                               <0xfffe0038 0x8>;
  62
  63                         interrupt-controller;
  64                         #interrupt-cells = <1>;
  65
  66                         interrupt-parent = <&cpu_intc>;
  67                         interrupts = <2>, <3>;
  68                 };
  69
  70                 ext_intc0: interrupt-controller@fffe0014 {
  71                         compatible = "brcm,bcm6345-ext-intc";
  72                         reg = <0xfffe0014 0x4>;
  73
  74                         interrupt-controller;
  75                         #interrupt-cells = <2>;
  76
  77                         interrupts = <25>, <26>, <27>, <28>;
  78                 };
  79
  80                 ext_intc1: interrupt-controller@fffe001c {
  81                         compatible = "brcm,bcm6345-ext-intc";
  82                         reg = <0xfffe001c 0x4>;
  83
  84                         interrupt-controller;
  85                         #interrupt-cells = <2>;
  86
  87                         interrupts = <20>, <21>;
  88                 };
  89
  90                 pinctrl: pin-controller@fffe0080 {
  91                         compatible = "brcm,bcm6358-pinctrl";
  92                         reg = <0xfffe0080 0x8>,
  93                               <0xfffe0088 0x8>;
  94                         reg-names = "dirout", "dat", "mode";
  95                         brcm,gpiomode = <&gpiomode>;
  96
  97                         gpio-controller;
  98                         #gpio-cells = <2>;
  99
 100                         interrupts-extended = <&ext_intc1 0 0>,
 101                                               <&ext_intc1 1 0>,
 102                                               <&ext_intc0 0 0>,
 103                                               <&ext_intc0 1 0>,
 104                                               <&ext_intc0 2 0>,
 105                                               <&ext_intc0 3 0>;
 106                         interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35",
 107                                           "gpio36", "gpio37";
 108
 109                         pinctrl_ebi_cs: ebi_cs {
 110                                 function = "ebi_cs";
 111                                 groups = "ebi_cs_grp";
 112                         };
 113
 114                         pinctrl_uart1: uart1 {
 115                                 function = "uart1";
 116                                 groups = "uart1_grp";
 117                         };
 118
 119                         pinctrl_serial_led: serial_led {
 120                                 function = "serial_led";
 121                                 groups = "serial_led_grp";
 122                         };
 123
 124                         pinctrl_legacy_led: legacy_led {
 125                                 function = "legacy_led";
 126                                 groups = "legacy_led_grp";
 127                         };
 128
 129                         pinctrl_led: led {
 130                                 function = "led";
 131                                 groups = "led_grp";
 132                         };
 133
 134                         pinctrl_spi_cs_23: spi_cs {
 135                                 function = "spi_cs";
 136                                 groups = "spi_cs_grp";
 137                         };
 138
 139                         pinctrl_utopia: utopia {
 140                                 function = "utopia";
 141                                 groups = "utopia_grp";
 142                         };
 143
 144                         pinctrl_pwm_syn_clk: pwm_syn_clk {
 145                                 function = "pwm_syn_clk";
 146                                 groups = "pwm_syn_clk_grp";
 147                         };
 148
 149                         pinctrl_sys_irq: sys_irq {
 150                                 function = "sys_irq";
 151                                 groups = "sys_irq_grp";
 152                         };
 153                 };
 154
 155                 gpiomode: gpiomode@fffe0098 {
 156                         compatible = "brcm,bcm6358-gpiomode", "syscon";
 157                         reg = <0xfffe0098 0x4>;
 158                 };
 159
 160                 leds: led-controller@fffe00d0 {
 161                         #address-cells = <1>;
 162                         #size-cells = <0>;
 163                         compatible = "brcm,bcm6358-leds";
 164                         reg = <0xfffe00d0 0x8>;
 165                         status = "disabled";
 166                 };
 167
 168                 uart0: serial@fffe0100 {
 169                         compatible = "brcm,bcm6345-uart";
 170                         reg = <0xfffe0100 0x18>;
 171
 172                         interrupt-parent = <&periph_intc>;
 173                         interrupts = <2>;
 174
 175                         /* clocks = <&periph_clk>; */
 176                         /* clock-names = "refclk"; */
 177
 178                         status = "disabled";
 179                 };
 180
 181                 uart1: serial@fffe0120 {
 182                         compatible = "brcm,bcm6345-uart";
 183                         reg = <0xfffe0120 0x18>;
 184
 185                         interrupt-parent = <&periph_intc>;
 186                         interrupts = <3>;
 187
 188                         /* clocks = <&periph_clk>; */
 189                         /* clock-names = "refclk"; */
 190
 191                         status = "disabled";
 192                 };
 193
 194                 lsspi: spi@fffe0800 {
 195                         #address-cells = <1>;
 196                         #size-cells = <0>;
 197                         compatible = "brcm,bcm6358-spi";
 198                         reg = <0xfffe0800 0x70c>;
 199                         interrupts = <1>;
 200                         /* clocks = <&clkctl 9>; */
 201                 };
 202         };
 203 };