package/mac80211/src/include/net/wireless.h

   1 #ifndef __NET_WIRELESS_H
   2 #define __NET_WIRELESS_H
   3
   4 /*
   5  * 802.11 device management
   6  *
   7  * Copyright 2007       Johannes Berg <johannes@sipsolutions.net>
   8  */
   9
  10 #include <linux/netdevice.h>
  11 #include <linux/debugfs.h>
  12 #include <linux/list.h>
  13 #include <net/cfg80211.h>
  14
  15 /**
  16  * enum ieee80211_band - supported frequency bands
  17  *
  18  * The bands are assigned this way because the supported
  19  * bitrates differ in these bands.
  20  *
  21  * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
  22  * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
  23  */
  24 enum ieee80211_band {
  25         IEEE80211_BAND_2GHZ,
  26         IEEE80211_BAND_5GHZ,
  27
  28         /* keep last */
  29         IEEE80211_NUM_BANDS
  30 };
  31
  32 /**
  33  * enum ieee80211_channel_flags - channel flags
  34  *
  35  * Channel flags set by the regulatory control code.
  36  *
  37  * @IEEE80211_CHAN_DISABLED: This channel is disabled.
  38  * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
  39  *      on this channel.
  40  * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
  41  * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
  42  */
  43 enum ieee80211_channel_flags {
  44         IEEE80211_CHAN_DISABLED         = 1<<0,
  45         IEEE80211_CHAN_PASSIVE_SCAN     = 1<<1,
  46         IEEE80211_CHAN_NO_IBSS          = 1<<2,
  47         IEEE80211_CHAN_RADAR            = 1<<3,
  48 };
  49
  50 /**
  51  * struct ieee80211_channel - channel definition
  52  *
  53  * This structure describes a single channel for use
  54  * with cfg80211.
  55  *
  56  * @center_freq: center frequency in MHz
  57  * @hw_value: hardware-specific value for the channel
  58  * @flags: channel flags from &enum ieee80211_channel_flags.
  59  * @orig_flags: channel flags at registration time, used by regulatory
  60  *      code to support devices with additional restrictions
  61  * @band: band this channel belongs to.
  62  * @max_antenna_gain: maximum antenna gain in dBi
  63  * @max_power: maximum transmission power (in dBm)
  64  * @orig_mag: internal use
  65  * @orig_mpwr: internal use
  66  */
  67 struct ieee80211_channel {
  68         enum ieee80211_band band;
  69         u16 center_freq;
  70         u16 hw_value;
  71         u32 flags;
  72         int max_antenna_gain;
  73         int max_power;
  74         u32 orig_flags;
  75         int orig_mag, orig_mpwr;
  76 };
  77
  78 /**
  79  * enum ieee80211_rate_flags - rate flags
  80  *
  81  * Hardware/specification flags for rates. These are structured
  82  * in a way that allows using the same bitrate structure for
  83  * different bands/PHY modes.
  84  *
  85  * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
  86  *      preamble on this bitrate; only relevant in 2.4GHz band and
  87  *      with CCK rates.
  88  * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
  89  *      when used with 802.11a (on the 5 GHz band); filled by the
  90  *      core code when registering the wiphy.
  91  * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
  92  *      when used with 802.11b (on the 2.4 GHz band); filled by the
  93  *      core code when registering the wiphy.
  94  * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
  95  *      when used with 802.11g (on the 2.4 GHz band); filled by the
  96  *      core code when registering the wiphy.
  97  * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
  98  */
  99 enum ieee80211_rate_flags {
 100         IEEE80211_RATE_SHORT_PREAMBLE   = 1<<0,
 101         IEEE80211_RATE_MANDATORY_A      = 1<<1,
 102         IEEE80211_RATE_MANDATORY_B      = 1<<2,
 103         IEEE80211_RATE_MANDATORY_G      = 1<<3,
 104         IEEE80211_RATE_ERP_G            = 1<<4,
 105 };
 106
 107 /**
 108  * struct ieee80211_rate - bitrate definition
 109  *
 110  * This structure describes a bitrate that an 802.11 PHY can
 111  * operate with. The two values @hw_value and @hw_value_short
 112  * are only for driver use when pointers to this structure are
 113  * passed around.
 114  *
 115  * @flags: rate-specific flags
 116  * @bitrate: bitrate in units of 100 Kbps
 117  * @hw_value: driver/hardware value for this rate
 118  * @hw_value_short: driver/hardware value for this rate when
 119  *      short preamble is used
 120  */
 121 struct ieee80211_rate {
 122         u32 flags;
 123         u16 bitrate;
 124         u16 hw_value, hw_value_short;
 125 };
 126
 127 /**
 128  * struct ieee80211_ht_info - describing STA's HT capabilities
 129  *
 130  * This structure describes most essential parameters needed
 131  * to describe 802.11n HT capabilities for an STA.
 132  *
 133  * @ht_supported: is HT supported by STA, 0: no, 1: yes
 134  * @cap: HT capabilities map as described in 802.11n spec
 135  * @ampdu_factor: Maximum A-MPDU length factor
 136  * @ampdu_density: Minimum A-MPDU spacing
 137  * @supp_mcs_set: Supported MCS set as described in 802.11n spec
 138  */
 139 struct ieee80211_ht_info {
 140         u16 cap; /* use IEEE80211_HT_CAP_ */
 141         u8 ht_supported;
 142         u8 ampdu_factor;
 143         u8 ampdu_density;
 144         u8 supp_mcs_set[16];
 145 };
 146
 147 /**
 148  * struct ieee80211_supported_band - frequency band definition
 149  *
 150  * This structure describes a frequency band a wiphy
 151  * is able to operate in.
 152  *
 153  * @channels: Array of channels the hardware can operate in
 154  *      in this band.
 155  * @band: the band this structure represents
 156  * @n_channels: Number of channels in @channels
 157  * @bitrates: Array of bitrates the hardware can operate with
 158  *      in this band. Must be sorted to give a valid "supported
 159  *      rates" IE, i.e. CCK rates first, then OFDM.
 160  * @n_bitrates: Number of bitrates in @bitrates
 161  */
 162 struct ieee80211_supported_band {
 163         struct ieee80211_channel *channels;
 164         struct ieee80211_rate *bitrates;
 165         enum ieee80211_band band;
 166         int n_channels;
 167         int n_bitrates;
 168         struct ieee80211_ht_info ht_info;
 169 };
 170
 171 /**
 172  * struct wiphy - wireless hardware description
 173  * @idx: the wiphy index assigned to this item
 174  * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
 175  */
 176 struct wiphy {
 177         /* assign these fields before you register the wiphy */
 178
 179         /* permanent MAC address */
 180         u8 perm_addr[ETH_ALEN];
 181
 182         /* If multiple wiphys are registered and you're handed e.g.
 183          * a regular netdev with assigned ieee80211_ptr, you won't
 184          * know whether it points to a wiphy your driver has registered
 185          * or not. Assign this to something global to your driver to
 186          * help determine whether you own this wiphy or not. */
 187         void *privid;
 188
 189         struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
 190
 191         /* fields below are read-only, assigned by cfg80211 */
 192
 193         /* the item in /sys/class/ieee80211/ points to this,
 194          * you need use set_wiphy_dev() (see below) */
 195         struct device dev;
 196
 197         /* dir in debugfs: ieee80211/<wiphyname> */
 198         struct dentry *debugfsdir;
 199
 200         char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 201 };
 202
 203 /** struct wireless_dev - wireless per-netdev state
 204  *
 205  * This structure must be allocated by the driver/stack
 206  * that uses the ieee80211_ptr field in struct net_device
 207  * (this is intentional so it can be allocated along with
 208  * the netdev.)
 209  *
 210  * @wiphy: pointer to hardware description
 211  */
 212 struct wireless_dev {
 213         struct wiphy *wiphy;
 214
 215         /* private to the generic wireless code */
 216         struct list_head list;
 217         struct net_device *netdev;
 218 };
 219
 220 /**
 221  * wiphy_priv - return priv from wiphy
 222  */
 223 static inline void *wiphy_priv(struct wiphy *wiphy)
 224 {
 225         BUG_ON(!wiphy);
 226         return &wiphy->priv;
 227 }
 228
 229 /**
 230  * set_wiphy_dev - set device pointer for wiphy
 231  */
 232 static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
 233 {
 234         wiphy->dev.parent = dev;
 235 }
 236
 237 /**
 238  * wiphy_dev - get wiphy dev pointer
 239  */
 240 static inline struct device *wiphy_dev(struct wiphy *wiphy)
 241 {
 242         return wiphy->dev.parent;
 243 }
 244
 245 /**
 246  * wiphy_name - get wiphy name
 247  */
 248 static inline char *wiphy_name(struct wiphy *wiphy)
 249 {
 250         return wiphy->dev.bus_id;
 251 }
 252
 253 /**
 254  * wdev_priv - return wiphy priv from wireless_dev
 255  */
 256 static inline void *wdev_priv(struct wireless_dev *wdev)
 257 {
 258         BUG_ON(!wdev);
 259         return wiphy_priv(wdev->wiphy);
 260 }
 261
 262 /**
 263  * wiphy_new - create a new wiphy for use with cfg80211
 264  *
 265  * create a new wiphy and associate the given operations with it.
 266  * @sizeof_priv bytes are allocated for private use.
 267  *
 268  * the returned pointer must be assigned to each netdev's
 269  * ieee80211_ptr for proper operation.
 270  */
 271 struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv);
 272
 273 /**
 274  * wiphy_register - register a wiphy with cfg80211
 275  *
 276  * register the given wiphy
 277  *
 278  * Returns a non-negative wiphy index or a negative error code.
 279  */
 280 extern int wiphy_register(struct wiphy *wiphy);
 281
 282 /**
 283  * wiphy_unregister - deregister a wiphy from cfg80211
 284  *
 285  * unregister a device with the given priv pointer.
 286  * After this call, no more requests can be made with this priv
 287  * pointer, but the call may sleep to wait for an outstanding
 288  * request that is being handled.
 289  */
 290 extern void wiphy_unregister(struct wiphy *wiphy);
 291
 292 /**
 293  * wiphy_free - free wiphy
 294  */
 295 extern void wiphy_free(struct wiphy *wiphy);
 296
 297 /**
 298  * ieee80211_channel_to_frequency - convert channel number to frequency
 299  */
 300 extern int ieee80211_channel_to_frequency(int chan);
 301
 302 /**
 303  * ieee80211_frequency_to_channel - convert frequency to channel number
 304  */
 305 extern int ieee80211_frequency_to_channel(int freq);
 306
 307 #endif /* __NET_WIRELESS_H */