target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts

   1 /*
   2  * Copyright 2013 Gateworks Corporation
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13 #include "imx6q.dtsi"
  14
  15 / {
  16         model = "Gateworks Ventana GW5400-A";
  17         compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
  18
  19         /* these are used by bootloader for disabling nodes */
  20         aliases {
  21                 ethernet0 = &fec;
  22                 ethernet1 = &eth1;
  23                 i2c0 = &i2c1;
  24                 i2c1 = &i2c2;
  25                 i2c2 = &i2c3;
  26                 ipu0 = &ipu1;
  27                 ipu1 = &ipu2;
  28                 led0 = &led0;
  29                 led1 = &led1;
  30                 led2 = &led2;
  31                 pwm0 = &pwm1;
  32                 pwm1 = &pwm2;
  33                 pwm2 = &pwm3;
  34                 pwm3 = &pwm4;
  35                 sky2 = &eth1;
  36                 ssi0 = &ssi1;
  37                 ssi1 = &ssi2;
  38                 spi0 = &ecspi1;
  39                 spi1 = &ecspi2;
  40                 spi2 = &ecspi3;
  41                 spi3 = &ecspi4;
  42                 spi4 = &ecspi5;
  43                 usb0 = &usbh3;
  44                 usb1 = &usbotg;
  45                 usdhc0 = &usdhc1;
  46                 usdhc1 = &usdhc2;
  47                 usdhc2 = &usdhc3;
  48                 usdhc3 = &usdhc4;
  49         };
  50
  51         memory {
  52                 reg = <0x10000000 0x40000000>;
  53         };
  54
  55         leds {
  56                 compatible = "gpio-leds";
  57
  58                 led0: user1 {
  59                         label = "user1";
  60                         gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
  61                         default-state = "on";
  62                         linux,default-trigger = "heartbeat";
  63                 };
  64
  65                 led1: user2 {
  66                         label = "user2";
  67                         gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
  68                         default-state = "off";
  69                 };
  70
  71                 led2: user3 {
  72                         label = "user3";
  73                         gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
  74                         default-state = "off";
  75                 };
  76         };
  77
  78         regulators {
  79                 compatible = "simple-bus";
  80
  81                 reg_2p5v: 2p5v {
  82                         compatible = "regulator-fixed";
  83                         regulator-name = "2P5V";
  84                         regulator-min-microvolt = <2500000>;
  85                         regulator-max-microvolt = <2500000>;
  86                         regulator-always-on;
  87                 };
  88
  89                 reg_3p3v: 3p3v {
  90                         compatible = "regulator-fixed";
  91                         regulator-name = "3P3V";
  92                         regulator-min-microvolt = <3300000>;
  93                         regulator-max-microvolt = <3300000>;
  94                         regulator-always-on;
  95                 };
  96
  97                 reg_usb_otg_vbus: usb_otg_vbus {
  98                         compatible = "regulator-fixed";
  99                         regulator-name = "usb_otg_vbus";
 100                         regulator-min-microvolt = <5000000>;
 101                         regulator-max-microvolt = <5000000>;
 102                         gpio = <&gpio3 22 0>;
 103                         enable-active-high;
 104                 };
 105         };
 106
 107         sound {
 108                 compatible = "fsl,imx6q-sabrelite-sgtl5000",
 109                              "fsl,imx-audio-sgtl5000";
 110                 model = "imx6q-sabrelite-sgtl5000";
 111                 ssi-controller = <&ssi1>;
 112                 audio-codec = <&codec>;
 113                 audio-routing =
 114                         "MIC_IN", "Mic Jack",
 115                         "Mic Jack", "Mic Bias",
 116                         "Headphone Jack", "HP_OUT";
 117                 mux-int-port = <1>;
 118                 mux-ext-port = <4>;
 119         };
 120 };
 121
 122 &audmux {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&pinctrl_audmux_3>;
 125         status = "okay";
 126 };
 127
 128 &ecspi1 {
 129         fsl,spi-num-chipselects = <1>;
 130         cs-gpios = <&gpio3 19 0>;
 131         pinctrl-names = "default";
 132         pinctrl-0 = <&pinctrl_ecspi1_1>;
 133         status = "okay";
 134
 135         flash: m25p80@0 {
 136                 compatible = "sst,w25q256";
 137                 spi-max-frequency = <30000000>;
 138                 reg = <0>;
 139         };
 140 };
 141
 142 &fec {
 143         pinctrl-names = "default";
 144         pinctrl-0 = <&pinctrl_enet_1>;
 145         phy-mode = "rgmii";
 146         phy-reset-gpios = <&gpio1 30 0>;
 147         status = "okay";
 148 };
 149
 150 &i2c1 {
 151         status = "okay";
 152         clock-frequency = <100000>;
 153         pinctrl-names = "default";
 154         pinctrl-0 = <&pinctrl_i2c1_1>;
 155
 156         eeprom: eeprom@50 {
 157                 compatible = "atmel,24c02";
 158                 reg = <0x50>;
 159                 pagesize = <16>;
 160         };
 161
 162         eeprom1: eeprom@50 {
 163                 compatible = "atmel,24c02";
 164                 reg = <0x50>;
 165                 pagesize = <16>;
 166         };
 167
 168         eeprom2: eeprom@51 {
 169                 compatible = "atmel,24c02";
 170                 reg = <0x51>;
 171                 pagesize = <16>;
 172         };
 173
 174         eeprom3: eeprom@52 {
 175                 compatible = "atmel,24c02";
 176                 reg = <0x52>;
 177                 pagesize = <16>;
 178         };
 179
 180         eeprom4: eeprom@53 {
 181                 compatible = "atmel,24c02";
 182                 reg = <0x53>;
 183                 pagesize = <16>;
 184         };
 185
 186         rtc: ds1672@68 {
 187                 compatible = "dallas,ds1672";
 188                 reg = <0x68>;
 189         };
 190
 191         gpio: pca9555@23 {
 192                 compatible = "nxp,pca9555";
 193                 reg = <0x23>;
 194                 gpio-controller;
 195                 #gpio-cells = <2>;
 196         };
 197
 198         hwmon: gsc@29 {
 199                 compatible = "gw,gsp";
 200                 reg = <0x29>;
 201         };
 202 };
 203
 204 &i2c2 {
 205         status = "okay";
 206         clock-frequency = <100000>;
 207         pinctrl-names = "default";
 208         pinctrl-0 = <&pinctrl_i2c2_2>;
 209
 210         pmic: pfuze@08 {
 211                 compatible = "fsl,pfuze100";
 212                 reg = <0x08>;
 213         };
 214
 215         pciswitch: pex8609@3f {
 216                 compatible = "plx,pex8609";
 217                 reg = <0x3f>;
 218         };
 219
 220         pciclkgen: si52147@6b {
 221                 compatible = "sil,si52147";
 222                 reg = <0x6b>;
 223         };
 224 };
 225
 226 &i2c3 {
 227         status = "okay";
 228         clock-frequency = <100000>;
 229         pinctrl-names = "default";
 230         pinctrl-0 = <&pinctrl_i2c3_2>;
 231
 232         codec: sgtl5000@0a {
 233                 compatible = "fsl,sgtl5000";
 234                 reg = <0x0a>;
 235                 clocks = <&clks 169>;
 236                 VDDA-supply = <&reg_2p5v>;
 237                 VDDIO-supply = <&reg_3p3v>;
 238         };
 239
 240         accelerometer: mma8450@1c {
 241                 compatible = "fsl,mma8450";
 242                 reg = <0x1c>;
 243         };
 244
 245         videoout: adv7393@2a {
 246                 compatible = "adi,adv7393";
 247                 reg = <0x2a>;
 248         };
 249
 250         videoin: adv7180@20 {
 251                 compatible = "adi,adv7180";
 252                 reg = <0x20>;
 253         };
 254
 255         hdmiin: adv7611@4c {
 256                 compatible = "adi,adv7611";
 257                 reg = <0x4c>;
 258         };
 259
 260         touchscreen: egalax_ts@04 {
 261                 compatible = "eeti,egalax_ts";
 262                 reg = <0x04>;
 263                 wakeup-gpios = <&gpio1 12 0>;
 264         };
 265 };
 266
 267 &iomuxc {
 268         pinctrl-names = "default";
 269         pinctrl-0 = <&pinctrl_hog>;
 270
 271         hog {
 272                 pinctrl_hog: hoggrp {
 273                         fsl,pins = <
 274                                 MX6Q_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
 275                                 MX6Q_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
 276                                 MX6Q_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
 277                                 MX6Q_PAD_KEY_COL2__GPIO4_IO10   0x80000000 /* user2 led */
 278                                 MX6Q_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
 279                                 MX6Q_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
 280                                 MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
 281                                 MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
 282                                 MX6Q_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
 283                                 MX6Q_PAD_GPIO_0__CCM_CLKO1      0x80000000 /* AUD4_MCK */
 284                          >;
 285                 };
 286         };
 287 };
 288
 289 &ldb {
 290         status = "okay";
 291         lvds-channel@0 {
 292                 crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
 293         };
 294 };
 295
 296 &pcie {
 297         reset-gpio = <&gpio1 29 0>;
 298         status = "okay";
 299
 300         eth1: sky2@8 { /* MAC/PHY on bus 8 */
 301                 compatible = "marvell,sky2";
 302                 /* Filled in by U-Boot */
 303                 mac-address = [ 00 00 00 00 00 00 ];
 304         };
 305 };
 306
 307 &ssi1 {
 308         fsl,mode = "i2s-slave";
 309         status = "okay";
 310 };
 311
 312 &uart1 {
 313         pinctrl-names = "default";
 314         pinctrl-0 = <&pinctrl_uart1_2>;
 315         status = "okay";
 316 };
 317
 318 &uart2 {
 319         pinctrl-names = "default";
 320         pinctrl-0 = <&pinctrl_uart2_2>;
 321         status = "okay";
 322 };
 323
 324 &uart3 {
 325         pinctrl-names = "default";
 326         pinctrl-0 = <&pinctrl_uart3_1>;
 327         status = "okay";
 328 };
 329
 330 &uart5 {
 331         status = "okay";
 332         pinctrl-names = "default";
 333         pinctrl-0 = <&pinctrl_uart5_1>;
 334 };
 335
 336 &usbh1 {
 337         status = "okay";
 338 };
 339
 340 &usdhc3 {
 341         pinctrl-names = "default";
 342         pinctrl-0 = <&pinctrl_usdhc3_2>;
 343         cd-gpios = <&gpio7 0 0>;
 344         vmmc-supply = <&reg_3p3v>;
 345         status = "okay";
 346 };