target/linux/ramips/dts/W150M.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "W150M", "ralink,rt3050-soc";
   7         model = "Tenda W150M";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 partition@0 {
  18                         label = "u-boot";
  19                         reg = <0x0 0x30000>;
  20                         read-only;
  21                 };
  22
  23                 partition@30000 {
  24                         label = "u-boot-env";
  25                         reg = <0x30000 0x10000>;
  26                         read-only;
  27                 };
  28
  29                 factory: partition@40000 {
  30                         label = "factory";
  31                         reg = <0x40000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 partition@50000 {
  36                         label = "firmware";
  37                         reg = <0x50000 0x3c8000>;
  38                 };
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43
  44                 3grouter {
  45                         label = "w150m:blue:3grouter";
  46                         gpios = <&gpio0 11 1>;
  47                 };
  48
  49                 ap {
  50                         label = "w150m:blue:ap";
  51                         gpios = <&gpio0 12 1>;
  52                 };
  53
  54                 wisprouter {
  55                         label = "w150m:blue:wisprouter";
  56                         gpios = <&gpio0 9 1>;
  57                 };
  58
  59                 wirelessrouter {
  60                         label = "w150m:blue:wirelessrouter";
  61                         gpios = <&gpio0 13 1>;
  62                 };
  63
  64                 3g {
  65                         label = "w150m:blue:3g";
  66                         gpios = <&gpio0 7 1>;
  67                 };
  68
  69                 wpsreset {
  70                         label = "w150m:blue:wpsreset";
  71                         gpios = <&gpio0 14 1>;
  72                 };
  73         };
  74
  75         gpio-keys-polled {
  76                 compatible = "gpio-keys-polled";
  77                 #address-cells = <1>;
  78                 #size-cells = <0>;
  79                 poll-interval = <20>;
  80
  81                 reset {
  82                         label = "reset";
  83                         gpios = <&gpio0 0 1>;
  84                         linux,code = <0x198>;
  85                 };
  86
  87                 mode {
  88                         label = "mode";
  89                         gpios = <&gpio0 10 1>;
  90                         linux,code = <0x100>;
  91                 };
  92         };
  93 };
  94
  95 &pinctrl {
  96         state_default: pinctrl0 {
  97                 gpio {
  98                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  99                         ralink,function = "gpio";
 100                 };
 101         };
 102 };
 103
 104 &ethernet {
 105         mtd-mac-address = <&factory 0x4>;
 106 };
 107
 108 &esw {
 109         mediatek,portmap = <0x2f>;
 110 };
 111
 112 &wmac {
 113         ralink,mtd-eeprom = <&factory 0>;
 114 };