remove bootargs from dts
[openwrt/staging/lynxis/omap.git] / target / linux / ramips / dts / WL_330N.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "WL_330N", "ralink,rt3050-soc";
7 model = "Asus WL-330N";
8
9 memorydetect {
10 ralink,memory = <0x0 0x200000 0x4000000>;
11 };
12
13 palmbus@10000000 {
14 sysc@0 {
15 ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
16 ralink,uartmux = "gpio";
17 ralink,wdtmux = <1>;
18 };
19
20 gpio0: gpio@600 {
21 status = "okay";
22 };
23
24 spi@b00 {
25 status = "okay";
26 m25p80@0 {
27 #address-cells = <1>;
28 #size-cells = <1>;
29 compatible = "mx25l3205d";
30 reg = <0 0>;
31 linux,modalias = "m25p80", "mx25l3205d";
32 spi-max-frequency = <10000000>;
33
34 partition@0 {
35 label = "u-boot";
36 reg = <0x0 0x30000>;
37 read-only;
38 };
39
40 partition@30000 {
41 label = "u-boot-env";
42 reg = <0x30000 0x10000>;
43 read-only;
44 };
45
46 factory: partition@40000 {
47 label = "factory";
48 reg = <0x40000 0x10000>;
49 read-only;
50 };
51
52 partition@50000 {
53 label = "firmware";
54 reg = <0x50000 0x3b0000>;
55 };
56 };
57 };
58 };
59
60 ethernet@10100000 {
61 status = "okay";
62 };
63
64 esw@10110000 {
65 status = "okay";
66 ralink,portmap = <0x3e>;
67 };
68
69 gpio-leds {
70 compatible = "gpio-leds";
71 link {
72 label = "asus:blue:link";
73 gpios = <&gpio0 9 1>;
74 };
75 power {
76 label = "asus:blue:power";
77 gpios = <&gpio0 11 1>;
78 };
79 };
80
81 gpio-keys-polled {
82 compatible = "gpio-keys-polled";
83 #address-cells = <1>;
84 #size-cells = <0>;
85 poll-interval = <20>;
86 reset {
87 label = "reset";
88 gpios = <&gpio0 10 1>;
89 linux,code = <0x198>;
90 };
91 wps {
92 label = "wps";
93 gpios = <&gpio0 0 1>;
94 linux,code = <0x198>;
95 };
96 };
97
98 wmac@10180000 {
99 status = "okay";
100 };
101 };