lantiq: kernel 4.14: cleanup dts files

[openwrt/staging/mkresin.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / ARV7510PW22.dts

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts
index dc3f614b9dc9b9fe7e011fd0441b8809d0c660e7..d99e1e3fe4a695c8ee4ba0f2d4e28f24a8000f64 100644 (file)
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts
@@ -26,106 +26,6 @@
                reg = <0x0 0x4000000>;
        };
 
-       sram@1F000000 {
-               vmmc@107000 {
-                       status = "okay";
-                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       fpi@10000000 {
-               localbus@0 {
-                       nor-boot@0 {
-                               compatible = "lantiq,nor";
-                               bank-width = <2>;
-                               reg = <0 0x0 0x1000000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partitions {
-                                       compatible = "fixed-partitions";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       partition@0 {
-                                               label = "uboot";
-                                               reg = <0x00000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       partition@40000 {
-                                               label = "uboot_env";
-                                               reg = <0x40000 0x20000>;
-                                               read-only;
-                                       };
-
-                                       partition@60000 {
-                                               label = "firmware";
-                                               reg = <0x60000 0xf80000>;
-                                       };
-
-                                       boardconfig: partition@fe0000 {
-                                               label = "board_config";
-                                               reg = <0xfe0000 0x20000>;
-                                               read-only;
-                                       };
-                               };
-                       };
-               };
-
-               gpio: pinmux@E100B10 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&state_default>;
-
-                       state_default: pinmux {
-                               exin {
-                                       lantiq,groups = "exin1";
-                                       lantiq,function = "exin";
-                                       lantiq,pull = <2>;
-                                       lantiq,output = <0>;
-                               };
-                               pci_in {
-                                       lantiq,groups = "req1", "req2";
-                                       lantiq,function = "pci";
-                                       lantiq,open-drain = <1>;
-                                       lantiq,pull = <2>;
-                                       lantiq,output = <0>;
-                               };
-                               pci_out {
-                                       lantiq,groups = "gnt1";
-                                       lantiq,function = "pci";
-                                       lantiq,output = <1>;
-                               };
-                               pci_rst {
-                                       lantiq,pins = "io21";
-                                       lantiq,pull = <2>;
-                                       lantiq,output = <1>;
-                               };
-                               pins_out {
-                                       lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
-                                       lantiq,output = <1>;
-                               };
-                               pins_in {
-                                       lantiq,pins = "io11", "io12", "io28";
-                                       lantiq,open-drain = <1>;
-                                       lantiq,pull = <2>;
-                                       lantiq,output = <0>;
-                               };
-                       };
-               };
-
-               ifxhcd@E101000 {
-                       status = "okay";
-                       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               etop@E180000 {
-                       /* Switch reset 19 */
-                       phy-mode = "mii";
-                       mtd-mac-address = <&boardconfig 0x16>;
-               };
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -175,6 +75,92 @@
        };
 };
 
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_in {
+                       lantiq,groups = "req1", "req2";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+               pins_out {
+                       lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
+                       lantiq,output = <1>;
+               };
+               pins_in {
+                       lantiq,pins = "io11", "io12", "io28";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+       };
+};
+
+&gsw {
+       /* Switch reset 19 */
+       phy-mode = "mii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x1000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "uboot_env";
+                               reg = <0x40000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "firmware";
+                               reg = <0x60000 0xf80000>;
+                       };
+
+                       boardconfig: partition@fe0000 {
+                               label = "board_config";
+                               reg = <0xfe0000 0x20000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
 &pci0 {
        status = "okay";
        lantiq,external-clock;
@@ -194,3 +180,13 @@
                ralink,mtd-eeprom-swap;
        };
 };
+
+&usb {
+       status = "okay";
+       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+};