ramips: change wifi led trigger for Archer C50v3

[openwrt/staging/mkresin.git] / target / linux / ramips / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index a34abbb69f325f2e4d727bc9ecc28652b6ce531e..88e4c2b7feadd87440df7a3b2a774ac2d7f3c1c8 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -410,8 +410,8 @@ tplink,c20-v4)
 tplink,c50-v3)
        ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
 tplink,c50-v3)
        ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"

-       ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan1"
-       set_wifi_led "$boardname:green:wlan5g"
+       ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
+       ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"

        ;;
 tplink,tl-mr3420-v5)
        set_usb_led "$boardname:green:usb"
        ;;
 tplink,tl-mr3420-v5)
        set_usb_led "$boardname:green:usb"


@@ -495,6 +495,11 @@ y1s)
        ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
        ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
        ;;
        ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
        ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
        ;;

+youhua,wr1200js)
+       ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
+       ucidef_set_led_usbdev "usb" "USB" "$boardname:blue:usb" "1-2"
+       ucidef_set_led_default "wps" "wps" "$boardname:blue:wps" "0"
+       ;;

 zbt-ape522ii)
        ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
        ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
 zbt-ape522ii)
        ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
        ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"


@@ -527,6 +532,9 @@ zbt-wr8305rt)
        set_usb_led "$boardname:green:usb"
        set_wifi_led "$boardname:green:wifi"
        ;;
        set_usb_led "$boardname:green:usb"
        set_wifi_led "$boardname:green:wifi"
        ;;

+zorlik,zl5900v2)
+       ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
+       ;;

 zte-q7)
        set_wifi_led "$boardname:blue:status"
        ;;
 zte-q7)
        set_wifi_led "$boardname:blue:status"
        ;;