ramips: fix firmware splitter for edimax based boards

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / 3G-6200N.dts

diff --git a/target/linux/ramips/dts/3G-6200N.dts b/target/linux/ramips/dts/3G-6200N.dts
index 82cfaa800827adc0a3416abb5d9f0ecaa7722e41..d4a45d7beb646a929ea33bd99ad0a3fef2e895dd 100644 (file)
--- a/target/linux/ramips/dts/3G-6200N.dts
+++ b/target/linux/ramips/dts/3G-6200N.dts
@@ -9,48 +9,60 @@
        compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
        model = "Edimax 3g-6200n";
 
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@3e0000 {
-                       label = "cimage";
-                       reg = <0x3e0000 0x20000>;
-                       read-only;
-               };
 
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x390000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@3e0000 {
+                               label = "cimage";
+                               reg = <0x3e0000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "edimax,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x390000>;
+                       };
                };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
 
-               power {
+               led_power: power {
                        label = "3g-6200n:green:power";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
@@ -63,13 +75,13 @@
                3g {
                        label = "3g-6200n:blue:3g";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&otg_port1>;
+                       linux,default-trigger = "usbport";
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {