ramips: mt7620: power up ephy port 4

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / ALL0256N-8M.dts

diff --git a/target/linux/ramips/dts/ALL0256N-8M.dts b/target/linux/ramips/dts/ALL0256N-8M.dts
index 974a4bd4657b7da7f7e76709a21418462e71bf41..5e2e3895afba58267978fd19d2d7ecf04edd1df0 100644 (file)
--- a/target/linux/ramips/dts/ALL0256N-8M.dts
+++ b/target/linux/ramips/dts/ALL0256N-8M.dts
@@ -1,96 +1,43 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "ALL0256N.dtsi"
 
 / {
-       compatible = "ALL0256N", "ralink,rt3050-soc";
-       model = "Allnet ALL0256N";
+       compatible = "allnet,all0256n-8m", "allnet,all0256n", "ralink,rt3050-soc";
+       model = "Allnet ALL0256N (8M)";
+};
 
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
+&spi0 {
+       status = "okay";
 
-               gpio0: gpio@600 {
-                       status = "okay";
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
                };
 
-               spi@b00 {
-                       status = "okay";
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "mx25l3205d";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "mx25l3205d";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x7b0000>;
-                               };
-                       };
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
                };
-       };
-
-       ethernet@10100000 {
-               status = "okay";
-       };
-
-       esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x3f>;
-       };
 
-       gpio-leds {
-               compatible = "gpio-leds";
-               rssilow {
-                       label = "all0256n:green:rssilow";
-                       gpios = <&gpio0 14 1>;
-               };
-               rssimed {
-                       label = "all0256n:green:rssimed";
-                       gpios = <&gpio0 12 1>;
-               };
-               rssihigh {
-                       label = "all0256n:green:rssihigh";
-                       gpios = <&gpio0 13 1>;
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
                };
-       };
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x198>;
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
                };
        };
-
-       wmac@10180000 {
-               status = "okay";
-       };
 };