ramips: add support for indicating the boot state using multiple leds

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / ArcherC50.dts

diff --git a/target/linux/ramips/dts/ArcherC50.dts b/target/linux/ramips/dts/ArcherC50.dts
index 88bd3272d7a0e44883ea1ae93e012556487fd983..0524bfc5b110bb78afd635b7fcb5970ce5b090b3 100644 (file)
--- a/target/linux/ramips/dts/ArcherC50.dts
+++ b/target/linux/ramips/dts/ArcherC50.dts
@@ -9,6 +9,13 @@
        compatible = "tplink,c50", "ralink,mt7620a-soc";
        model = "TP-Link Archer C50";
 
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
        chosen {
                bootargs = "console=ttyS0,115200";
        };
@@ -21,7 +28,7 @@
                        gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                };
 
-               power {
+               led_power: power {
                        label = "c50:green:power";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                        default-state = "on";
@@ -30,6 +37,8 @@
                usb {
                        label = "c50:green:usb";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
                };
 
                wan {
@@ -60,8 +69,6 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
@@ -93,45 +100,49 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x20000>;
-                       read-only;
-               };
-
-               partition@20000 {
-                       label = "firmware";
-                       reg = <0x20000 0x7a0000>;
-               };
-
-               partition@7c0000 {
-                       label = "config";
-                       reg = <0x7c0000 0x10000>;
-                       read-only;
-               };
-
-               rom: partition@7d0000 {
-                       label = "rom";
-                       reg = <0x7d0000 0x10000>;
-                       read-only;
-               };
-
-               partition@7e0000 {
-                       label = "romfile";
-                       reg = <0x7e0000 0x10000>;
-                       read-only;
-               };
-
-               radio: partition@7f0000 {
-                       label = "radio";
-                       reg = <0x7f0000 0x10000>;
-                       read-only;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x7a0000>;
+                       };
+
+                       partition@7c0000 {
+                               label = "config";
+                               reg = <0x7c0000 0x10000>;
+                               read-only;
+                       };
+
+                       rom: partition@7d0000 {
+                               label = "rom";
+                               reg = <0x7d0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@7e0000 {
+                               label = "romfile";
+                               reg = <0x7e0000 0x10000>;
+                               read-only;
+                       };
+
+                       radio: partition@7f0000 {
+                               label = "radio";
+                               reg = <0x7f0000 0x10000>;
+                               read-only;
+                       };
                };
        };
 };
@@ -173,15 +184,14 @@
 
 &pcie {
        status = "okay";
+};
 
-       pcie-bridge {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&radio 32768>;
-                       ieee80211-freq-limit = <5000000 6000000>;
-                       mtd-mac-address = <&rom 0xf100>;
-                       mtd-mac-address-increment = <(-1)>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&radio 32768>;
+               ieee80211-freq-limit = <5000000 6000000>;
+               mtd-mac-address = <&rom 0xf100>;
+               mtd-mac-address-increment = <(-1)>;
        };
 };