ramips: mt7620: power up ephy port 4

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / CF-WR800N.dts

diff --git a/target/linux/ramips/dts/CF-WR800N.dts b/target/linux/ramips/dts/CF-WR800N.dts
index d076e6432d0ed66a289c31e836abb95b9fb237f3..b66df862fb344b55fb0afd502ecb2ba24b21d6d3 100644 (file)
--- a/target/linux/ramips/dts/CF-WR800N.dts
+++ b/target/linux/ramips/dts/CF-WR800N.dts
@@ -2,8 +2,11 @@
 
 #include "mt7620n.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "cf-wr800n", "ralink,mt7620n-soc";
+       compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc";
        model = "Comfast CF-WR800N";
 
        chosen {
@@ -15,17 +18,17 @@
 
                ethernet {
                        label = "cf-wr800n:white:ethernet";
-                       gpios = <&gpio2 4 1>;
+                       gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
 
                wifi {
                        label = "cf-wr800n:white:wifi";
-                       gpios = <&gpio3 0 1>;
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
 
                wps {
                        label = "cf-wr800n:white:wps";
-                       gpios = <&gpio1 15 1>;
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -37,8 +40,8 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 2 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 };
@@ -66,8 +69,7 @@
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
-               reg = <0 0>;
-               linux,modalias = "m25p80", "w25q64";
+               reg = <0>;
                spi-max-frequency = <10000000>;
 
                partition@0 {