ramips: mt7620: power up ephy port 4

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / DCS-930.dts

diff --git a/target/linux/ramips/dts/DCS-930.dts b/target/linux/ramips/dts/DCS-930.dts
index a497c04d5d5a4658d61abf76d6598c801577acdf..348cdb43823aaec72fd4849d01070c402ede5bd6 100644 (file)
--- a/target/linux/ramips/dts/DCS-930.dts
+++ b/target/linux/ramips/dts/DCS-930.dts
@@ -1,24 +1,17 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "DCS-930", "ralink,rt3050-soc";
+       compatible = "dlink,dcs-930", "ralink,rt3050-soc";
        model = "D-Link DCS-930";
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x400000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -60,17 +53,20 @@
 
        gpio-leds {
                compatible = "gpio-leds";
+
                wifi {
-                       label = "d-link:red:alert";
-                       gpios = <&gpio0 8 1>;
+                       label = "dcs-930:red:alert";
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
+
                power {
-                       label = "d-link:green:status";
-                       gpios = <&gpio0 9 1>;
+                       label = "dcs-930:green:status";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
+
                wps {
-                       label = "d-link:blue:wps";
-                       gpios = <&gpio0 13 1>;
+                       label = "dcs-930:blue:wps";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -82,51 +78,39 @@
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x101>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_1>;
                };
+
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
+};
 
-       esw@10110000 {
-               ralink,portmap = <0x2f>;
-
-               port@0 {
-                       compatible = "swconfig,port";
-                       swconfig,segment = "lan";
-                       swconfig,portmap = <0 4>;
-               };
-               port@1 {
-                       compatible = "swconfig,port";
-                       swconfig,segment = "lan";
-                       swconfig,portmap = <1 3>;
-               };
-               port@2 {
-                       compatible = "swconfig,port";
-                       swconfig,segment = "lan";
-                       swconfig,portmap = <2 2>;
-               };
-               port@3 {
-                       compatible = "swconfig,port";
-                       swconfig,segment = "lan";
-                       swconfig,portmap = <3 1>;
-               };
-               port@4 {
-                       compatible = "swconfig,port";
-                       swconfig,segment = "wan";
-                       swconfig,portmap = <4 0>;
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+                       ralink,function = "gpio";
                };
        };
+};
 
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
 
-       otg@101c0000 {
-               status = "okay";
-       };
+&esw {
+       mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+       status = "okay";
 };