ramips: mt7621: add compatible strings

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / W2914NSV2.dtsi

diff --git a/target/linux/ramips/dts/W2914NSV2.dtsi b/target/linux/ramips/dts/W2914NSV2.dtsi
index c842b0099b305db4920f69b93dab1acd72a91abb..d67998dfb0c0ba91b7d8978910ab32d247c23efe 100644 (file)
--- a/target/linux/ramips/dts/W2914NSV2.dtsi
+++ b/target/linux/ramips/dts/W2914NSV2.dtsi
@@ -4,6 +4,8 @@
 #include <dt-bindings/input/input.h>
 
 / {
+       compatible = "wevo,w2914ns-v2", "mediatek,mt7621-soc";
+
        chosen {
                bootargs = "console=ttyS0,57600";
        };
@@ -26,20 +28,6 @@
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               // Only USB LED is connected to GPIO.
-               // All of other LEDs are connected directly to
-               // switch, WiFi chip, Vcc, so they are not controllable
-               // via GPIO
-
-               usb {
-                       label = "w2914nsv2:green:usb";
-                       gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-               };
-       };
 };
 
 &xhci {
@@ -55,6 +43,7 @@
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
 
                partition@0 {
                        label = "u-boot";
@@ -85,20 +74,19 @@
        status = "okay";
 
        pcie0 {
-               wifi@14c3,7662 {
-                       compatible = "pci14c3,7662";
+               wifi@14c3,7603 {
+                       compatible = "pci14c3,7603";
                        reg = <0x0000 0 0 0 0>;
                        mediatek,mtd-eeprom = <&factory 0x0000>;
-                       mediatek,5ghz = <0>;
                };
        };
 
        pcie1 {
-               wifi@14c3,7603 {
-                       compatible = "pci14c3,7603";
+               wifi@14c3,7662 {
+                       compatible = "pci14c3,7662";
                        reg = <0x0000 0 0 0 0>;
                        mediatek,mtd-eeprom = <&factory 0x8000>;
-                       mediatek,2ghz = <0>;
+                       ieee80211-freq-limit = <5000000 6000000>;
                };
        };
 };