#include "mt7621.dtsi"
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
+ compatible = "buffalo,wsr-1166dhp", "mediatek,mt7621-soc";
model = "Buffalo WSR-1166DHP";
memory@0 {
bootargs = "console=ttyS0,57600";
};
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l12805d";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf90000>;
- };
-
- partition@fe00000 {
- label = "board_data";
- reg = <0xfe0000 0x10000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
power {
label = "power";
gpios = <&gpio0 18 1>;
- linux,code = <0x74>;
+ linux,code = <KEY_POWER>;
};
reset {
label = "reset";
gpios = <&gpio0 3 1>;
- linux,code = <0x198>;
+ linux,code = <KEY_RESTART>;
};
aoss {
label = "aoss";
gpios = <&gpio0 6 1>;
- linux,code = <0x211>;
+ linux,code = <KEY_WPS_BUTTON>;
};
auto {
label = "mode";
gpios = <&gpio0 7 0>;
- linux,code = <0x100>;
- linux,input-type = <5>; /* EV_SW */
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
ap {
label = "ap";
gpios = <&gpio0 10 0>;
- linux,code = <0x100>;
- linux,input-type = <5>; /* EV_SW */
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
router {
label = "router";
gpios = <&gpio0 12 0>;
- linux,code = <0x100>;
- linux,input-type = <5>; /* EV_SW */
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
};
compatible = "gpio-poweroff";
gpios = <&gpio0 0 1>;
};
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf90000>;
+ };
+
+ partition@fe0000 {
+ label = "board_data";
+ reg = <0xfe0000 0x20000>;
+ };
+ };
+};
- pcie@1e140000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
};
+ };
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
- };
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
};
+
+&xhci {
+ status = "disabled";
+};