package/kernel/linux/modules/can.mk

   1 #
   2 # Copyright (C) 2013 OpenWrt.org
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 CAN_MENU:=CAN Support
   9
  10 define KernelPackage/can
  11   SUBMENU:=$(CAN_MENU)
  12   TITLE:=CAN bus support
  13   KCONFIG:=\
  14         CONFIG_CAN=m \
  15         CONFIG_CAN_DEV \
  16         CONFIG_CAN_CALC_BITTIMING=y \
  17         CONFIG_CAN_LEDS=y \
  18         CONFIG_CAN_AT91=n \
  19         CONFIG_CAN_TI_HECC=n \
  20         CONFIG_CAN_MCP251X=n \
  21         CONFIG_CAN_BFIN=n \
  22         CONFIG_CAN_JANZ_ICAN3=n \
  23         CONFIG_PCH_CAN=n \
  24         CONFIG_CAN_GRCAN=n \
  25         CONFIG_CAN_CC770=n \
  26         CONFIG_CAN_MSCAN=n \
  27         CONFIG_CAN_SJA1000=n \
  28         CONFIG_CAN_SOFTING=n \
  29         CONFIG_NET_EMATCH_CANID=n \
  30         CONFIG_CAN_DEBUG_DEVICES=n
  31   FILES:=$(LINUX_DIR)/drivers/net/can/can-dev.ko \
  32          $(LINUX_DIR)/net/can/can.ko
  33   AUTOLOAD:=$(call AutoProbe,can can-dev)
  34 endef
  35
  36 define KernelPackage/can/description
  37  Kernel module for CAN bus support.
  38 endef
  39
  40 $(eval $(call KernelPackage,can))
  41
  42
  43 define AddDepends/can
  44   SUBMENU:=$(CAN_MENU)
  45   DEPENDS+=kmod-can $(1)
  46 endef
  47
  48
  49 define KernelPackage/can-bcm
  50   TITLE:=Broadcast Manager CAN Protcol
  51   KCONFIG:=CONFIG_CAN_BCM
  52   FILES:=$(LINUX_DIR)/net/can/can-bcm.ko
  53   AUTOLOAD:=$(call AutoProbe,can-bcm)
  54   $(call AddDepends/can)
  55 endef
  56
  57 define KernelPackage/can-bcm/description
  58  The Broadcast Manager offers content filtering, timeout monitoring,
  59  sending of RTR frames, and cyclic CAN messages without permanent user
  60  interaction.
  61 endef
  62
  63 $(eval $(call KernelPackage,can-bcm))
  64
  65
  66 define KernelPackage/can-c-can
  67   TITLE:=BOSCH C_CAN/D_CAN drivers
  68   KCONFIG:=CONFIG_CAN_C_CAN
  69   FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can.ko
  70   AUTOLOAD:=$(call AutoProbe,c_can)
  71   $(call AddDepends/can)
  72 endef
  73
  74 define KernelPackage/can-c-can/description
  75  This driver adds generic support for the C_CAN/D_CAN chips.
  76 endef
  77
  78 $(eval $(call KernelPackage,can-c-can))
  79
  80
  81 define KernelPackage/can-c-can-pci
  82   TITLE:=PCI Bus based BOSCH C_CAN/D_CAN driver
  83   KCONFIG:=CONFIG_CAN_C_CAN_PCI
  84   DEPENDS:=kmod-can-c-can @PCI_SUPPORT
  85   FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can_pci.ko
  86   AUTOLOAD:=$(call AutoProbe,c_can_pci)
  87   $(call AddDepends/can)
  88 endef
  89
  90 define KernelPackage/can-c-can-pci/description
  91  This driver adds support for the C_CAN/D_CAN chips connected
  92  to the PCI bus.
  93 endef
  94
  95 $(eval $(call KernelPackage,can-c-can-pci))
  96
  97
  98 define KernelPackage/can-c-can-platform
  99   TITLE:=Platform Bus based BOSCH C_CAN/D_CAN driver
 100   KCONFIG:=CONFIG_CAN_C_CAN_PLATFORM
 101   DEPENDS:=kmod-can-c-can +kmod-regmap-core
 102   FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can_platform.ko
 103   AUTOLOAD:=$(call AutoProbe,c_can_platform)
 104   $(call AddDepends/can)
 105 endef
 106
 107 define KernelPackage/can-c-can-platform/description
 108  This driver adds support for the C_CAN/D_CAN chips connected
 109  to the "platform bus" (Linux abstraction for directly to the
 110  processor attached devices) which can be found on various
 111  boards from ST Microelectronics (http://www.st.com) like the
 112  SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
 113  boards like am335x, dm814x, dm813x and dm811x.
 114 endef
 115
 116 $(eval $(call KernelPackage,can-c-can-platform))
 117
 118
 119 define KernelPackage/can-flexcan
 120   TITLE:=Support for Freescale FLEXCAN based chips
 121   KCONFIG:=CONFIG_CAN_FLEXCAN
 122   FILES:=$(LINUX_DIR)/drivers/net/can/flexcan.ko
 123   AUTOLOAD:=$(call AutoProbe,flexcan)
 124   $(call AddDepends/can,@TARGET_imx6)
 125 endef
 126
 127 define KernelPackage/can-flexcan/description
 128  Freescale FLEXCAN CAN bus controller implementation.
 129 endef
 130
 131 $(eval $(call KernelPackage,can-flexcan))
 132
 133
 134 define KernelPackage/can-gw
 135   TITLE:=CAN Gateway/Router
 136   KCONFIG:=CONFIG_CAN_GW
 137   FILES:=$(LINUX_DIR)/net/can/can-gw.ko
 138   AUTOLOAD:=$(call AutoProbe,can-gw)
 139   $(call AddDepends/can)
 140 endef
 141
 142 define KernelPackage/can-gw/description
 143  The CAN Gateway/Router is used to route (and modify) CAN frames.
 144 endef
 145
 146 $(eval $(call KernelPackage,can-gw))
 147
 148
 149 define KernelPackage/can-mcp251x
 150   TITLE:=MCP251x SPI CAN controller
 151   KCONFIG:=\
 152         CONFIG_SPI=y \
 153         CONFIG_CAN_MCP251X
 154   FILES:=$(LINUX_DIR)/drivers/net/can/spi/mcp251x.ko
 155   AUTOLOAD:=$(call AutoProbe,can-mcp251x)
 156   $(call AddDepends/can)
 157 endef
 158
 159 define KernelPackage/can-mcp251x/description
 160  Microchip MCP251x SPI CAN controller
 161 endef
 162
 163 $(eval $(call KernelPackage,can-mcp251x))
 164
 165
 166 define KernelPackage/can-raw
 167   TITLE:=Raw CAN Protcol
 168   KCONFIG:=CONFIG_CAN_RAW
 169   FILES:=$(LINUX_DIR)/net/can/can-raw.ko
 170   AUTOLOAD:=$(call AutoProbe,can-raw)
 171   $(call AddDepends/can)
 172 endef
 173
 174 define KernelPackage/can-raw/description
 175  The raw CAN protocol option offers access to the CAN bus via
 176  the BSD  socket API.
 177 endef
 178
 179 $(eval $(call KernelPackage,can-raw))
 180
 181
 182 define KernelPackage/can-slcan
 183   TITLE:=Serial / USB serial CAN Adaptors (slcan)
 184   KCONFIG:=CONFIG_CAN_SLCAN
 185   FILES:=$(LINUX_DIR)/drivers/net/can/slcan.ko
 186   AUTOLOAD:=$(call AutoProbe,slcan)
 187   $(call AddDepends/can)
 188 endef
 189
 190 define KernelPackage/can-slcan/description
 191  CAN driver for several 'low cost' CAN interfaces that are attached
 192  via serial lines or via USB-to-serial adapters using the LAWICEL
 193  ASCII protocol.
 194 endef
 195
 196 $(eval $(call KernelPackage,can-slcan))
 197
 198
 199 define KernelPackage/can-usb-8dev
 200   TITLE:=8 devices USB2CAN interface
 201   KCONFIG:=CONFIG_CAN_8DEV_USB
 202   FILES:=$(LINUX_DIR)/drivers/net/can/usb/usb_8dev.ko
 203   AUTOLOAD:=$(call AutoProbe,usb_8dev)
 204   $(call AddDepends/can,+kmod-usb-core)
 205 endef
 206
 207 define KernelPackage/can-usb-8dev/description
 208  This driver supports the USB2CAN interface
 209  from 8 devices (http://www.8devices.com).
 210 endef
 211
 212 $(eval $(call KernelPackage,can-usb-8dev))
 213
 214
 215 define KernelPackage/can-usb-ems
 216   TITLE:=EMS CPC-USB/ARM7 CAN/USB interface
 217   KCONFIG:=CONFIG_CAN_EMS_USB
 218   FILES:=$(LINUX_DIR)/drivers/net/can/usb/ems_usb.ko
 219   AUTOLOAD:=$(call AutoProbe,ems_usb)
 220   $(call AddDepends/can,+kmod-usb-core)
 221 endef
 222
 223 define KernelPackage/can-usb-ems/description
 224  This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
 225  from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
 226 endef
 227
 228 $(eval $(call KernelPackage,can-usb-ems))
 229
 230
 231 define KernelPackage/can-usb-esd
 232   TITLE:=ESD USB/2 CAN/USB interface
 233   KCONFIG:=CONFIG_CAN_ESD_USB2
 234   FILES:=$(LINUX_DIR)/drivers/net/can/usb/esd_usb2.ko
 235   AUTOLOAD:=$(call AutoProbe,esd_usb2)
 236   $(call AddDepends/can,+kmod-usb-core)
 237 endef
 238
 239 define KernelPackage/can-usb-esd/description
 240  This driver supports the CAN-USB/2 interface
 241  from esd electronic system design gmbh (http://www.esd.eu).
 242 endef
 243
 244 $(eval $(call KernelPackage,can-usb-esd))
 245
 246
 247 define KernelPackage/can-usb-kvaser
 248   TITLE:=Kvaser CAN/USB interface
 249   KCONFIG:=CONFIG_CAN_KVASER_USB
 250   FILES:= \
 251         $(LINUX_DIR)/drivers/net/can/usb/kvaser_usb/kvaser_usb.ko
 252   AUTOLOAD:=$(call AutoProbe,kvaser_usb)
 253   $(call AddDepends/can,+kmod-usb-core)
 254 endef
 255
 256 define KernelPackage/can-usb-kvaser/description
 257  This driver adds support for Kvaser CAN/USB devices like Kvaser
 258  Leaf Light.
 259 endef
 260
 261 $(eval $(call KernelPackage,can-usb-kvaser))
 262
 263
 264 define KernelPackage/can-usb-peak
 265   TITLE:=PEAK PCAN-USB/USB Pro interfaces
 266   KCONFIG:=CONFIG_CAN_PEAK_USB
 267   FILES:=$(LINUX_DIR)/drivers/net/can/usb/peak_usb/peak_usb.ko
 268   AUTOLOAD:=$(call AutoProbe,peak_usb)
 269   $(call AddDepends/can,+kmod-usb-core)
 270 endef
 271
 272 define KernelPackage/can-usb-peak/description
 273  This driver supports the PCAN-USB and PCAN-USB Pro adapters
 274  from PEAK-System Technik (http://www.peak-system.com).
 275 endef
 276
 277 $(eval $(call KernelPackage,can-usb-peak))
 278
 279
 280 define KernelPackage/can-vcan
 281   TITLE:=Virtual Local CAN Interface (vcan)
 282   KCONFIG:=CONFIG_CAN_VCAN
 283   FILES:=$(LINUX_DIR)/drivers/net/can/vcan.ko
 284   AUTOLOAD:=$(call AutoProbe,vcan)
 285   $(call AddDepends/can)
 286 endef
 287
 288 define KernelPackage/can-vcan/description
 289  Similar to the network loopback devices, vcan offers a
 290  virtual local CAN interface.
 291 endef
 292
 293 $(eval $(call KernelPackage,can-vcan))
 294
 295 define KernelPackage/can-xilinx-can
 296   TITLE:=Xilinx CAN IP
 297   KCONFIG:=CONFIG_CAN_XILINXCAN
 298   FILES:=$(LINUX_DIR)/drivers/net/can/xilinx_can.ko
 299   AUTOLOAD:=$(call AutoProbe,xilinx_can)
 300   $(call AddDepends/can,@TARGET_zynq)
 301 endef
 302
 303 define KernelPackage/can-xilinx-can/description
 304  Xilinx CAN driver. This driver supports both
 305  soft AXI CAN IP and Zynq CANPS IP.
 306 endef
 307
 308 $(eval $(call KernelPackage,can-xilinx-can))