target/linux/ath79/dts/tp9343_tplink_tl-wx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         aliases {
  10                 label-mac-device = &wmac;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16 };
  17
  18 &spi {
  19         status = "okay";
  20
  21         num-cs = <1>;
  22
  23         flash@0 {
  24                 compatible = "jedec,spi-nor";
  25                 reg = <0>;
  26                 spi-max-frequency = <25000000>;
  27
  28                 partitions {
  29                         compatible = "fixed-partitions";
  30                         #address-cells = <1>;
  31                         #size-cells = <1>;
  32
  33                         uboot:  partition@0 {
  34                                 label = "u-boot";
  35                                 reg = <0x000000 0x020000>;
  36                                 read-only;
  37                         };
  38
  39                         partition@20000 {
  40                                 compatible = "tplink,firmware";
  41                                 label = "firmware";
  42                                 reg = <0x020000 0x3d0000>;
  43                         };
  44
  45                         art: partition@3f0000 {
  46                                 label = "art";
  47                                 reg = <0x3f0000 0x010000>;
  48                                 read-only;
  49                         };
  50                 };
  51         };
  52 };
  53
  54 &uart {
  55         status = "okay";
  56 };
  57
  58 &eth0 {
  59         status = "okay";
  60
  61         phy-handle = <&swphy4>;
  62
  63         mtd-mac-address = <&uboot 0x1fc00>;
  64         mtd-mac-address-increment = <1>;
  65 };
  66
  67 &eth1 {
  68         status = "okay";
  69 };
  70
  71 &wmac {
  72         status = "okay";
  73
  74         mtd-cal-data = <&art 0x1000>;
  75         mtd-mac-address = <&uboot 0x1fc00>;
  76 };