ar71xx: move mach type definitions into a separate include file
[openwrt/staging/wigyori.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tew-632brp.c
1 /*
2 * TrendNET TEW-632BRP board support
3 *
4 * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
10 */
11
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/partitions.h>
14
15 #include <asm/mach-ar71xx/ar71xx.h>
16
17 #include "machtype.h"
18 #include "devices.h"
19 #include "dev-m25p80.h"
20 #include "dev-ar913x-wmac.h"
21 #include "dev-gpio-buttons.h"
22 #include "dev-leds-gpio.h"
23
24 #define TEW_632BRP_GPIO_LED_STATUS 1
25 #define TEW_632BRP_GPIO_LED_WPS 3
26 #define TEW_632BRP_GPIO_LED_WLAN 6
27 #define TEW_632BRP_GPIO_BTN_WPS 12
28 #define TEW_632BRP_GPIO_BTN_RESET 21
29
30 #define TEW_632BRP_BUTTONS_POLL_INTERVAL 20
31
32 #ifdef CONFIG_MTD_PARTITIONS
33 static struct mtd_partition tew_632brp_partitions[] = {
34 {
35 .name = "u-boot",
36 .offset = 0,
37 .size = 0x020000,
38 .mask_flags = MTD_WRITEABLE,
39 } , {
40 .name = "config",
41 .offset = 0x020000,
42 .size = 0x010000,
43 } , {
44 .name = "kernel",
45 .offset = 0x030000,
46 .size = 0x0d0000,
47 } , {
48 .name = "rootfs",
49 .offset = 0x100000,
50 .size = 0x2f0000,
51 } , {
52 .name = "art",
53 .offset = 0x3f0000,
54 .size = 0x010000,
55 .mask_flags = MTD_WRITEABLE,
56 } , {
57 .name = "firmware",
58 .offset = 0x030000,
59 .size = 0x3c0000,
60 }
61 };
62 #endif /* CONFIG_MTD_PARTITIONS */
63
64 static struct flash_platform_data tew_632brp_flash_data = {
65 #ifdef CONFIG_MTD_PARTITIONS
66 .parts = tew_632brp_partitions,
67 .nr_parts = ARRAY_SIZE(tew_632brp_partitions),
68 #endif
69 };
70
71 static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
72 {
73 .name = "tew-632brp:green:status",
74 .gpio = TEW_632BRP_GPIO_LED_STATUS,
75 .active_low = 1,
76 }, {
77 .name = "tew-632brp:blue:wps",
78 .gpio = TEW_632BRP_GPIO_LED_WPS,
79 .active_low = 1,
80 }, {
81 .name = "tew-632brp:green:wlan",
82 .gpio = TEW_632BRP_GPIO_LED_WLAN,
83 .active_low = 1,
84 }
85 };
86
87 static struct gpio_button tew_632brp_gpio_buttons[] __initdata = {
88 {
89 .desc = "reset",
90 .type = EV_KEY,
91 .code = BTN_0,
92 .threshold = 5,
93 .gpio = TEW_632BRP_GPIO_BTN_RESET,
94 }, {
95 .desc = "wps",
96 .type = EV_KEY,
97 .code = BTN_1,
98 .threshold = 5,
99 .gpio = TEW_632BRP_GPIO_BTN_WPS,
100 }
101 };
102
103 static void __init tew_632brp_setup(void)
104 {
105 ar71xx_add_device_mdio(0x0);
106
107 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
108 ar71xx_eth0_data.phy_mask = 0xf;
109 ar71xx_eth0_data.speed = SPEED_100;
110 ar71xx_eth0_data.duplex = DUPLEX_FULL;
111
112 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
113 ar71xx_eth1_data.phy_mask = 0x10;
114
115 ar71xx_add_device_eth(0);
116 ar71xx_add_device_eth(1);
117
118 ar71xx_add_device_m25p80(&tew_632brp_flash_data);
119
120 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
121 tew_632brp_leds_gpio);
122
123 ar71xx_add_device_gpio_buttons(-1, TEW_632BRP_BUTTONS_POLL_INTERVAL,
124 ARRAY_SIZE(tew_632brp_gpio_buttons),
125 tew_632brp_gpio_buttons);
126
127 ar913x_add_device_wmac();
128 }
129
130 MIPS_MACHINE(AR71XX_MACH_TEW_632BRP, "TRENDnet TEW-632BRP", tew_632brp_setup);