target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7240.dtsi"
   8
   9 / {
  10         compatible = "netgear,wnr612-v2", "qca,ar7240";
  11         model = "Netgear WNR612 V2";
  12
  13         aliases {
  14                 led-boot = &power;
  15                 led-failsafe = &power;
  16                 led-running = &power;
  17                 led-upgrade = &power;
  18         };
  19
  20         gpio-keys-polled {
  21                 compatible = "gpio-keys-polled";
  22                 poll-interval = <20>;
  23
  24                 reset {
  25                         label = "reset";
  26                         linux,code = <KEY_RESTART>;
  27                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  28                         debounce-interval = <60>;
  29                 };
  30         };
  31
  32         gpio-leds {
  33                 compatible = "gpio-leds";
  34                 power: power {
  35                         label = "netgear:green:power";
  36                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 lan1 {
  40                         label = "netgear:green:lan1";
  41                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 lan2 {
  45                         label = "netgear:green:lan2";
  46                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wan {
  50                         label = "netgear:green:wan";
  51                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 wlan: wlan {
  55                         label = "netgear:green:wlan";
  56                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  57                         default-state = "off";
  58                         linux,default-trigger = "phy0tpt";
  59                 };
  60         };
  61 };
  62
  63 &spi {
  64         status = "okay";
  65         num-cs = <1>;
  66
  67         flash@0 {
  68                 compatible = "jedec,spi-nor";
  69                 reg = <0>;
  70                 spi-max-frequency = <25000000>;
  71
  72                 partitions {
  73                         compatible = "fixed-partitions";
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76
  77                         uboot: partition@0 {
  78                                 reg = <0x0 0x40000>;
  79                                 label = "u-boot";
  80                                 read-only;
  81                         };
  82
  83                         partition@40000 {
  84                                 reg = <0x40000 0x10000>;
  85                                 label = "u-boot-env";
  86                         };
  87
  88                         partition@50000 {
  89                                 compatible = "netgear,uimage";
  90                                 reg = <0x50000 0x3a0000>;
  91                                 label = "firmware";
  92                         };
  93
  94                         partition@3f0000 {
  95                                 reg = <0x3f0000 0x10000>;
  96                                 label = "art";
  97                                 read-only;
  98                         };
  99                 };
 100         };
 101 };
 102
 103 &eth0 {
 104         status = "okay";
 105
 106         mtd-mac-address = <&uboot 0x1fc00>;
 107         mtd-mac-address-increment = <(-1)>;
 108 };
 109
 110 &eth1 {
 111         status = "okay";
 112
 113         mtd-mac-address = <&uboot 0x1fc00>;
 114         mtd-mac-address-increment = <1>;
 115 };
 116
 117 &pcie {
 118         status = "okay";
 119
 120         ath9k: wifi@0,0 {
 121                 compatible = "pci168c,002b";
 122                 reg = <0x0000 0 0 0 0>;
 123                 qca,no-eeprom;
 124                 #gpio-cells = <2>;
 125                 gpio-controller;
 126         };
 127 };
 128
 129 &uart {
 130         status = "okay";
 131 };