target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7240.dtsi"
   8
   9 / {
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15                 label-mac-device = &eth1;
  16         };
  17
  18         ath9k-keys {
  19                 compatible = "gpio-keys-polled";
  20                 poll-interval = <20>;
  21
  22                 reset {
  23                         label = "reset";
  24                         linux,code = <KEY_RESTART>;
  25                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  26                         debounce-interval = <60>;
  27                 };
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 pinctrl-names = "default";
  34                 pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
  35
  36                 led_power: power {
  37                         label = "netgear:green:power";
  38                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 lan1 {
  42                         label = "netgear:green:lan1";
  43                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 lan2 {
  47                         label = "netgear:green:lan2";
  48                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 wan {
  52                         label = "netgear:green:wan";
  53                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56
  57         ath9k-leds {
  58                 compatible = "gpio-leds";
  59
  60                 wlan {
  61                         label = "netgear:green:wlan";
  62                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  63                         linux,default-trigger = "phy0tpt";
  64                 };
  65         };
  66 };
  67
  68 &spi {
  69         status = "okay";
  70
  71         num-cs = <1>;
  72
  73         flash@0 {
  74                 compatible = "jedec,spi-nor";
  75                 reg = <0>;
  76                 spi-max-frequency = <25000000>;
  77
  78                 partitions {
  79                         compatible = "fixed-partitions";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82
  83                         partition@0 {
  84                                 reg = <0x0 0x40000>;
  85                                 label = "u-boot";
  86                                 read-only;
  87                         };
  88
  89                         partition@40000 {
  90                                 reg = <0x40000 0x10000>;
  91                                 label = "u-boot-env";
  92                         };
  93
  94                         partition@50000 {
  95                                 compatible = "netgear,uimage";
  96                                 reg = <0x50000 0x3a0000>;
  97                                 label = "firmware";
  98                         };
  99
 100                         art: partition@3f0000 {
 101                                 reg = <0x3f0000 0x10000>;
 102                                 label = "art";
 103                                 read-only;
 104                         };
 105                 };
 106         };
 107 };
 108
 109 &eth0 {
 110         status = "okay";
 111
 112         mtd-mac-address = <&art 0x0>;
 113 };
 114
 115 &eth1 {
 116         status = "okay";
 117
 118         mtd-mac-address = <&art 0x6>;
 119 };
 120
 121 &pcie {
 122         status = "okay";
 123
 124         ath9k: wifi@0,0 {
 125                 compatible = "pci168c,002b";
 126                 reg = <0x0000 0 0 0 0>;
 127                 mtd-mac-address = <&art 0x0>;
 128                 mtd-mac-address-increment = <1>;
 129                 qca,no-eeprom;
 130                 #gpio-cells = <2>;
 131                 gpio-controller;
 132         };
 133 };
 134
 135 &uart {
 136         status = "okay";
 137 };