target/linux/ath79/dts/ar9341_pcs_cr3000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9341.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CR3000";
  11         compatible = "pcs,cr3000", "qca,ar9341";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-status = &status;
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys-polled";
  20                 poll-interval = <20>;
  21                 #address-cells = <1>;
  22                 #size-cells = <0>;
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&jtag_disable_pins>;
  25
  26                 reset {
  27                         label = "Reset button";
  28                         linux,code = <KEY_RESTART>;
  29                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  30                         debounce-interval = <60>;
  31                 };
  32
  33                 wps {
  34                         label = "WPS button";
  35                         linux,code = <KEY_WPS_BUTTON>;
  36                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  37                         debounce-interval = <60>;
  38                 };
  39         };
  40
  41         leds {
  42                 compatible = "gpio-leds";
  43
  44                 status: power {
  45                         label = "pcs:amber:power";
  46                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  47                         default-state = "on";
  48                 };
  49
  50                 wlan2g {
  51                         label = "pcs:blue:wlan";
  52                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  53                         default-state = "off";
  54                         linux,default-trigger = "phy0tpt";
  55                 };
  56
  57                 wan {
  58                         label = "pcs:blue:wan";
  59                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  60                         default-state = "off";
  61                 };
  62
  63                 lan1 {
  64                         label = "pcs:blue:lan1";
  65                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  66                         default-state = "off";
  67                 };
  68
  69                 lan2 {
  70                         label = "pcs:blue:lan2";
  71                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  72                         default-state = "off";
  73                 };
  74
  75                 lan3 {
  76                         label = "pcs:blue:lan3";
  77                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  78                         default-state = "off";
  79                 };
  80
  81                 lan4 {
  82                         label = "pcs:blue:lan4";
  83                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  84                         default-state = "off";
  85                 };
  86         };
  87 };
  88
  89 &ref {
  90         clock-frequency = <25000000>;
  91 };
  92
  93 &uart {
  94         status = "okay";
  95 };
  96
  97 &gpio {
  98         status = "okay";
  99 };
 100
 101 &spi {
 102         num-cs = <1>;
 103
 104         status = "okay";
 105
 106         flash@0 {
 107                 #address-cells = <1>;
 108                 #size-cells = <1>;
 109                 compatible = "jedec,spi-nor";
 110                 reg = <0>;
 111                 spi-max-frequency = <25000000>;
 112
 113                 partitions {
 114                         compatible = "fixed-partitions";
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117
 118                         uboot: partition@0 {
 119                                 label = "u-boot";
 120                                 reg = <0x000000 0x040000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@40000 {
 125                                 label = "u-boot-env";
 126                                 reg = <0x040000 0x010000>;
 127                                 read-only;
 128                         };
 129
 130                         partition@50000 {
 131                                 label = "firmware";
 132                                 reg = <0x050000 0x07a0000>;
 133                         };
 134
 135                         art: partition@7f0000 {
 136                                 label = "art";
 137                                 reg = <0x7f0000 0x010000>;
 138                                 read-only;
 139                         };
 140                 };
 141         };
 142 };
 143
 144 &wmac {
 145         status = "okay";
 146
 147         mtd-cal-data = <&art 0x1000>;
 148         mtd-mac-address = <&art 0x1002>;
 149 };
 150
 151 &eth0 {
 152         status = "okay";
 153
 154         phy-handle = <&swphy0>;
 155         mtd-mac-address = <&art 0x0>;
 156         mtd-mac-address-increment = <1>;
 157
 158 };
 159
 160 &eth1 {
 161         status = "okay";
 162
 163         phy-handle = <&swphy4>;
 164         mtd-mac-address = <&art 0x0>;
 165         phy-mode = "gmii";
 166         pll-data = <0x06000000 0x00000101 0x00001616>;
 167
 168         gmac-config {
 169                 device = <&gmac>;
 170                 switch-phy-swap = <1>;
 171         };
 172 };