target/linux/ath79/dts/ar9341_pcs_cr3000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9341.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CR3000";
  11         compatible = "pcs,cr3000", "qca,ar9341";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-status = &status;
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys-polled";
  20                 poll-interval = <20>;
  21
  22                 pinctrl-names = "default";
  23                 pinctrl-0 = <&jtag_disable_pins>;
  24
  25                 reset {
  26                         label = "Reset button";
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  29                         debounce-interval = <60>;
  30                 };
  31
  32                 wps {
  33                         label = "WPS button";
  34                         linux,code = <KEY_WPS_BUTTON>;
  35                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  36                         debounce-interval = <60>;
  37                 };
  38         };
  39
  40         leds {
  41                 compatible = "gpio-leds";
  42
  43                 status: power {
  44                         label = "pcs:amber:power";
  45                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  46                         default-state = "on";
  47                 };
  48
  49                 wlan2g {
  50                         label = "pcs:blue:wlan";
  51                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  52                         default-state = "off";
  53                         linux,default-trigger = "phy0tpt";
  54                 };
  55
  56                 wan {
  57                         label = "pcs:blue:wan";
  58                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  59                         default-state = "off";
  60                 };
  61
  62                 lan1 {
  63                         label = "pcs:blue:lan1";
  64                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  65                         default-state = "off";
  66                 };
  67
  68                 lan2 {
  69                         label = "pcs:blue:lan2";
  70                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  71                         default-state = "off";
  72                 };
  73
  74                 lan3 {
  75                         label = "pcs:blue:lan3";
  76                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  77                         default-state = "off";
  78                 };
  79
  80                 lan4 {
  81                         label = "pcs:blue:lan4";
  82                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  83                         default-state = "off";
  84                 };
  85         };
  86 };
  87
  88 &ref {
  89         clock-frequency = <25000000>;
  90 };
  91
  92 &uart {
  93         status = "okay";
  94 };
  95
  96 &gpio {
  97         status = "okay";
  98 };
  99
 100 &spi {
 101         num-cs = <1>;
 102
 103         status = "okay";
 104
 105         flash@0 {
 106                 compatible = "jedec,spi-nor";
 107                 reg = <0>;
 108                 spi-max-frequency = <25000000>;
 109
 110                 partitions {
 111                         compatible = "fixed-partitions";
 112                         #address-cells = <1>;
 113                         #size-cells = <1>;
 114
 115                         uboot: partition@0 {
 116                                 label = "u-boot";
 117                                 reg = <0x000000 0x040000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@40000 {
 122                                 label = "u-boot-env";
 123                                 reg = <0x040000 0x010000>;
 124                                 read-only;
 125                         };
 126
 127                         partition@50000 {
 128                                 label = "firmware";
 129                                 reg = <0x050000 0x07a0000>;
 130                         };
 131
 132                         art: partition@7f0000 {
 133                                 label = "art";
 134                                 reg = <0x7f0000 0x010000>;
 135                                 read-only;
 136                         };
 137                 };
 138         };
 139 };
 140
 141 &wmac {
 142         status = "okay";
 143
 144         mtd-cal-data = <&art 0x1000>;
 145         mtd-mac-address = <&art 0x1002>;
 146 };
 147
 148 &eth0 {
 149         status = "okay";
 150
 151         phy-handle = <&swphy0>;
 152         mtd-mac-address = <&art 0x0>;
 153         mtd-mac-address-increment = <1>;
 154
 155 };
 156
 157 &eth1 {
 158         status = "okay";
 159
 160         phy-handle = <&swphy4>;
 161         mtd-mac-address = <&art 0x0>;
 162         phy-mode = "gmii";
 163         pll-data = <0x06000000 0x00000101 0x00001616>;
 164
 165         gmac-config {
 166                 device = <&gmac>;
 167                 switch-phy-swap = <1>;
 168         };
 169 };