target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include "ar9342_ubnt_wa.dtsi"
   5
   6 / {
   7         compatible = "ubnt,nanobeam-ac", "ubnt,wa", "qca,ar9342";
   8         model = "Ubiquiti NanoBeam AC (WA)";
   9
  10         leds {
  11                 compatible = "gpio-leds";
  12
  13                 rssi0 {
  14                         label = "ubnt:blue:rssi0";
  15                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  16                 };
  17
  18                 rssi1 {
  19                         label = "ubnt:blue:rssi1";
  20                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  21                 };
  22
  23                 rssi2 {
  24                         label = "ubnt:blue:rssi2";
  25                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 rssi3 {
  29                         label = "ubnt:blue:rssi3";
  30                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  31                 };
  32         };
  33 };
  34
  35 &mdio0 {
  36         status = "okay";
  37
  38         phy-mask = <4>;
  39         phy4: ethernet-phy@4 {
  40                 phy-mode = "rgmii";
  41                 reg = <4>;
  42         };
  43 };
  44
  45 &eth0 {
  46         status = "okay";
  47
  48         /* default for ar934x, except for 1000M and 10M */
  49         pll-data = <0x06000000 0x00000101 0x00001313>;
  50
  51         mtd-mac-address = <&art 0x0>;
  52
  53         phy-mode = "rgmii";
  54         phy-handle = <&phy4>;
  55
  56         gmac-config {
  57                 device = <&gmac>;
  58                 rxd-delay = <3>;
  59                 rxdv-delay = <3>;
  60         };
  61 };