target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca953x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 led-boot = &led_link4;
  15                 led-failsafe = &led_link4;
  16                 led-running = &led_link4;
  17                 led-upgrade = &led_link4;
  18                 label-mac-device = &wmac;
  19         };
  20
  21         leds: leds {
  22                 compatible = "gpio-leds";
  23
  24                 link1 {
  25                         label = "tp-link:green:link1";
  26                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 link2 {
  30                         label = "tp-link:green:link2";
  31                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 link3 {
  35                         label = "tp-link:green:link3";
  36                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 led_link4: link4 {
  40                         label = "tp-link:green:link4";
  41                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         keys {
  46                 compatible = "gpio-keys";
  47
  48                 reset {
  49                         label = "Reset button";
  50                         linux,code = <KEY_RESTART>;
  51                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  52                 };
  53         };
  54 };
  55
  56 &uart {
  57         status = "okay";
  58 };
  59
  60 &spi {
  61         status = "okay";
  62
  63         num-cs = <1>;
  64
  65         flash@0 {
  66                 #address-cells = <1>;
  67                 #size-cells = <1>;
  68                 compatible = "jedec,spi-nor";
  69                 reg = <0>;
  70                 spi-max-frequency = <25000000>;
  71
  72                 partitions {
  73                         compatible = "fixed-partitions";
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76
  77                         uboot: partition@0 {
  78                                 label = "u-boot";
  79                                 reg = <0x000000 0x020000>;
  80                                 read-only;
  81                         };
  82
  83                         partition@20000 {
  84                                 label = "partition-table";
  85                                 reg = <0x020000 0x010000>;
  86                                 read-only;
  87                         };
  88
  89                         info: partition@30000 {
  90                                 label = "info";
  91                                 reg = <0x030000 0x010000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@40000 {
  96                                 label = "firmware";
  97                                 reg = <0x040000 0x780000>;
  98                                 compatible = "tplink,firmware";
  99                         };
 100
 101                         config: partition@7c0000 {
 102                                 label = "config";
 103                                 reg = <0x7c0000 0x030000>;
 104                                 read-only;
 105                         };
 106
 107                         art: partition@7f0000 {
 108                                 label = "art";
 109                                 reg = <0x7f0000 0x010000>;
 110                                 read-only;
 111                         };
 112                 };
 113         };
 114 };
 115
 116 &wmac {
 117         status = "okay";
 118
 119         mtd-cal-data = <&art 0x1000>;
 120         mtd-mac-address = <&info 0x8>;
 121 };
 122
 123 &eth0 {
 124         status = "okay";
 125
 126         phy-handle = <&swphy4>;
 127
 128         mtd-mac-address = <&info 0x8>;
 129 };