target/linux/ath79/dts/qca9556_avm_fritz-repeater.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         keys {
  15                 compatible = "gpio-keys";
  16
  17                 wps {
  18                         label = "wps";
  19                         linux,code = <KEY_WPS_BUTTON>;
  20                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  21                 };
  22         };
  23 };
  24
  25 &uart {
  26         status = "okay";
  27 };
  28
  29 &spi {
  30         status = "okay";
  31         num-cs = <1>;
  32
  33         flash@0 {
  34                 compatible = "jedec,spi-nor";
  35                 reg = <0>;
  36                 spi-max-frequency = <25000000>;
  37
  38                 partitions {
  39                         compatible = "fixed-partitions";
  40                         #address-cells = <1>;
  41                         #size-cells = <1>;
  42
  43                         partition@0 {
  44                                 label = "urlader";
  45                                 reg = <0x0 0x20000>;
  46                                 read-only;
  47                         };
  48
  49                         partition@20000 {
  50                                 compatible = "avm,eva-firmware";
  51                                 label = "firmware";
  52                                 reg = <0x20000 0xee0000>;
  53                         };
  54
  55                         partition@f00000 {
  56                                 label = "tffs (1)";
  57                                 reg = <0xf00000 0x80000>;
  58                                 read-only;
  59                         };
  60
  61                         partition@f80000 {
  62                                 label = "tffs (2)";
  63                                 reg = <0xf80000 0x80000>;
  64                                 read-only;
  65                         };
  66                 };
  67         };
  68 };
  69
  70 &wmac {
  71         status = "okay";
  72         qca,no-eeprom;
  73 };
  74
  75 &eth1 {
  76         status = "okay";
  77
  78         phy-handle = <&phy0>;
  79         pll-data = <0x3000000 0x101 0x1313>;
  80
  81         qca955x-sgmii-fixup;
  82
  83         gmac-config {
  84                 device = <&gmac>;
  85                 ge0-sgmii = <0>;
  86         };
  87 };
  88
  89 &mdio1 {
  90         status = "okay";
  91
  92         phy0: ethernet-phy@0 {
  93                 reg = <0>;
  94                 at803x-override-sgmii-link-check;
  95         };
  96 };