target/linux/ath79/dts/qca9558_engenius_esr1750.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x_senao_router-dual.dtsi"
   4
   5 / {
   6         compatible = "engenius,esr1750", "qca,qca9558";
   7         model = "EnGenius ESR1750";
   8
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_power: power {
  20                         label = "amber:power";
  21                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  22                         default-state = "on";
  23                 };
  24
  25                 wlan2g {
  26                         label = "blue:wlan2g";
  27                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  28                         linux,default-trigger = "phy1tpt";
  29                 };
  30
  31                 wlan5g {
  32                         label = "blue:wlan5g";
  33                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  34                         linux,default-trigger = "phy0tpt";
  35                 };
  36
  37                 wps_amber {
  38                         label = "amber:wps";
  39                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 wps_blue {
  43                         label = "blue:wps";
  44                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  45                 };
  46         };
  47 };
  48
  49 &phy0 {
  50         qca,mib-poll-interval = <500>;
  51
  52         qca,ar8327-initvals = <
  53                 0x04 0x87680000 /* PORT0 PAD MODE CTRL */
  54                 0x10 0x40000000 /* POWER_ON_STRAP */
  55                 0x50 0xcf35cf35 /* LED_CTRL0 */
  56                 0x54 0xcf35cf35 /* LED_CTRL1 */
  57                 0x58 0xcf35cf35 /* LED_CTRL2 */
  58                 0x5c 0x03ffff00 /* LED_CTRL3 */
  59                 0x7c 0x0000007e /* PORT0_STATUS */
  60         >;
  61 };
  62
  63 &usb_phy1 {
  64         status = "okay";
  65 };
  66
  67 &usb1 {
  68         status = "okay";
  69 };
  70
  71 &wmac {
  72         nvmem-cells = <&calibration_art_1000>;
  73         nvmem-cell-names = "calibration";
  74 };
  75
  76 &ath10k_0 {
  77         nvmem-cells = <&calibration_art_5000>;
  78         nvmem-cell-names = "calibration";
  79 };