target/linux/ath79/dts/qca9563_tplink_re450-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,re450-v2", "qca,qca9563";
  11         model = "TP-Link RE450 v2";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &system;
  19                 led-failsafe = &system;
  20                 led-running = &system;
  21                 led-upgrade = &system;
  22                 mdio-gpio0 = &mdio2;
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 system: power {
  29                         label = "tp-link:blue:power";
  30                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 wlan2g {
  34                         label = "tp-link:blue:wlan2g";
  35                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  36                         default-state = "off";
  37                         linux,default-trigger = "phy1tpt";
  38                 };
  39
  40                 wlan5g {
  41                         label = "tp-link:blue:wlan5g";
  42                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  43                         default-state = "off";
  44                         linux,default-trigger = "phy0tpt";
  45                 };
  46
  47                 lan_link {
  48                         label = "tp-link:green:lan_link";
  49                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  50                         default-state = "off";
  51                 };
  52
  53                 lan_data {
  54                         label = "tp-link:green:lan_data";
  55                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  56                         default-state = "off";
  57                 };
  58
  59                 wps_blue {
  60                         label = "tp-link:blue:wps";
  61                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  62                         default-state = "off";
  63                 };
  64
  65                 wps_red {
  66                         label = "tp-link:red:wps";
  67                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  68                         default-state = "off";
  69                 };
  70         };
  71
  72         keys {
  73                 compatible = "gpio-keys";
  74
  75                 reset {
  76                         label = "Reset button";
  77                         linux,code = <KEY_RESTART>;
  78                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  79                         debounce-interval = <60>;
  80                 };
  81
  82                 power {
  83                         label = "Power button";
  84                         linux,code = <KEY_POWER>;
  85                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  86                         debounce-interval = <60>;
  87                 };
  88
  89                 leds {
  90                         label = "LED control button";
  91                         linux,code = <BTN_0>;
  92                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  93                         debounce-interval = <60>;
  94                 };
  95
  96                 wps {
  97                         label = "WPS button";
  98                         linux,code = <KEY_WPS_BUTTON>;
  99                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 100                         debounce-interval = <60>;
 101                 };
 102         };
 103
 104         mdio2: mdio {
 105                 compatible = "virtual,mdio-gpio";
 106
 107                 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
 108                         <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
 109                 #address-cells = <1>;
 110                 #size-cells = <0>;
 111
 112                 phy0: ethernet-phy@4 {
 113                         reg = <4>;
 114                         device_type = "ethernet-phy";
 115                         reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 116                 };
 117         };
 118 };
 119
 120 &pcie {
 121         status = "okay";
 122 };
 123
 124 &uart {
 125         status = "okay";
 126 };
 127
 128 &gpio {
 129         status = "okay";
 130 };
 131
 132 &spi {
 133         status = "okay";
 134         num-cs = <1>;
 135
 136         flash@0 {
 137                 compatible = "jedec,spi-nor";
 138                 reg = <0>;
 139                 spi-max-frequency = <25000000>;
 140
 141                 partitions {
 142                         compatible = "fixed-partitions";
 143                         #address-cells = <1>;
 144                         #size-cells = <1>;
 145
 146                         partition@0 {
 147                                 label = "u-boot";
 148                                 reg = <0x000000 0x020000>;
 149                                 read-only;
 150                         };
 151
 152                         partition@20000 {
 153                                 compatible = "tplink,firmware";
 154                                 label = "firmware";
 155                                 reg = <0x020000 0x5e0000>;
 156                         };
 157
 158                         partition@600000 {
 159                                 label = "partition-table";
 160                                 reg = <0x600000 0x010000>;
 161                                 read-only;
 162                         };
 163
 164                         info: partition@610000 {
 165                                 label = "product-info";
 166                                 reg = <0x610000 0x020000>;
 167                                 read-only;
 168                         };
 169
 170                         partition@630000 {
 171                                 label = "config";
 172                                 reg = <0x630000 0x020000>;
 173                                 read-only;
 174                         };
 175
 176                         art: partition@7f0000 {
 177                                 label = "art";
 178                                 reg = <0x7f0000 0x010000>;
 179                                 read-only;
 180                         };
 181                 };
 182         };
 183 };
 184
 185 &eth0 {
 186         status = "okay";
 187         mtd-mac-address = <&info 0x8>;
 188         phy-handle = <&phy0>;
 189 };
 190
 191 &wmac {
 192         status = "okay";
 193         mtd-cal-data = <&art 0x1000>;
 194         mtd-mac-address = <&info 0x8>;
 195 };