target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         leds {
  14                 compatible = "gpio-leds";
  15
  16                 wifi_ac {
  17                         label = "ubnt:white:dome";
  18                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  19                         linux,default-trigger = "phy0tpt";
  20                 };
  21
  22                 wifi_n {
  23                         label = "ubnt:blue:dome";
  24                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  25                         linux,default-trigger = "phy1tpt";
  26                 };
  27
  28         };
  29
  30         keys {
  31                 compatible = "gpio-keys";
  32
  33                 reset {
  34                         label = "Reset button";
  35                         linux,code = <KEY_RESTART>;
  36                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  37                         debounce-interval = <60>;
  38                 };
  39         };
  40 };
  41
  42 &uart {
  43         status = "okay";
  44 };
  45
  46 &gpio {
  47         status = "okay";
  48 };
  49
  50 &pcie {
  51         status = "okay";
  52 };
  53
  54 &spi {
  55         status = "okay";
  56         num-cs = <1>;
  57
  58         flash@0 {
  59                 compatible = "jedec,spi-nor";
  60                 reg = <0>;
  61                 spi-max-frequency = <25000000>;
  62
  63                 partitions {
  64                         compatible = "fixed-partitions";
  65                         #address-cells = <1>;
  66                         #size-cells = <1>;
  67
  68                         partition@0 {
  69                                 label = "u-boot";
  70                                 reg = <0x000000 0x060000>;
  71                                 read-only;
  72                         };
  73
  74                         partition@60000 {
  75                                 label = "u-boot-env";
  76                                 reg = <0x060000 0x010000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@70000 {
  81                                 label = "firmware";
  82                                 reg = <0x070000 0x790000>;
  83                                 compatible = "denx,uimage";
  84                         };
  85
  86                         partition@800000 {
  87                                 label = "ubnt-airos";
  88                                 reg = <0x800000 0x790000>;
  89                                 read-only;
  90                         };
  91
  92                         partition@f90000 {
  93                                 label = "bs";
  94                                 reg = <0xf90000 0x020000>;
  95                         };
  96
  97                         partition@fb0000 {
  98                                 label = "cfg";
  99                                 reg = <0xfb0000 0x040000>;
 100                                 read-only;
 101                         };
 102
 103                         eeprom: partition@ff0000 {
 104                                 label = "EEPROM";
 105                                 reg = <0xff0000 0x010000>;
 106                                 read-only;
 107                         };
 108                 };
 109         };
 110 };
 111
 112 &wmac {
 113         status = "okay";
 114         mtd-cal-data = <&eeprom 0x1000>;
 115         mtd-mac-address = <&eeprom 0x0>;
 116 };