target/linux/bcm53xx/patches-4.19/130-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch

   1 From: Dan Haab <dan.haab@legrand.com>
   2 Date: Wed, 2 Oct 2019 09:57:26 -0600
   3 Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
   4
   5 It's a simple network device based on BCM47094 with just a single
   6 Ethernet port.
   7
   8 Signed-off-by: Dan Haab <dan.haab@legrand.com>
   9 ---
  10  arch/arm/boot/dts/Makefile                    |  1 +
  11  arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 53 +++++++++++++++++++
  12  2 files changed, 54 insertions(+)
  13  create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
  14
  15 --- a/arch/arm/boot/dts/Makefile
  16 +++ b/arch/arm/boot/dts/Makefile
  17 @@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
  18         bcm47094-luxul-abr-4500.dtb \
  19         bcm47094-luxul-xap-1610.dtb \
  20         bcm47094-luxul-xbr-4500.dtb \
  21 +       bcm47094-luxul-xwc-2000.dtb \
  22         bcm47094-luxul-xwr-3100.dtb \
  23         bcm47094-luxul-xwr-3150-v1.dtb \
  24         bcm47094-netgear-r8500.dtb \
  25 --- /dev/null
  26 +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
  27 @@ -0,0 +1,53 @@
  28 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  29 +/*
  30 + * Copyright 2019 Legrand AV Inc.
  31 + */
  32 +
  33 +/dts-v1/;
  34 +
  35 +#include "bcm47094.dtsi"
  36 +#include "bcm5301x-nand-cs0-bch8.dtsi"
  37 +
  38 +/ {
  39 +       compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
  40 +       model = "Luxul XWC-2000 V1";
  41 +
  42 +       chosen {
  43 +               bootargs = "earlycon";
  44 +       };
  45 +
  46 +       memory {
  47 +               reg = <0x00000000 0x08000000
  48 +                      0x88000000 0x18000000>;
  49 +       };
  50 +
  51 +       leds {
  52 +               compatible = "gpio-leds";
  53 +
  54 +               status  {
  55 +                       label = "bcm53xx:green:status";
  56 +                       gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
  57 +                       linux,default-trigger = "timer";
  58 +               };
  59 +       };
  60 +
  61 +       gpio-keys {
  62 +               compatible = "gpio-keys";
  63 +               #address-cells = <1>;
  64 +               #size-cells = <0>;
  65 +
  66 +               restart {
  67 +                       label = "Reset";
  68 +                       linux,code = <KEY_RESTART>;
  69 +                       gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
  70 +               };
  71 +       };
  72 +};
  73 +
  74 +&uart1 {
  75 +       status = "okay";
  76 +};
  77 +
  78 +&spi_nor {
  79 +       status = "okay";
  80 +};