brcm63xx: drop linux,part-probe usage where possible
[openwrt/staging/wigyori.git] / target / linux / brcm63xx / dts / ar-5315u.dts
1 /dts-v1/;
2
3 #include "bcm6318.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8 model = "Comtrend AR-5315u";
9 compatible = "comtrend,ar-5315u", "brcm,bcm6318";
10
11 chosen {
12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
13 stdout-path = "serial0:115200n8";
14 };
15
16 gpio-keys-polled {
17 compatible = "gpio-keys-polled";
18 #address-cells = <1>;
19 #size-cells = <0>;
20 poll-interval = <20>;
21 debounce-interval = <60>;
22
23 wps {
24 label = "wps";
25 gpios = <&pinctrl 3 1>;
26 linux,code = <KEY_WPS_BUTTON>;
27 };
28 reset {
29 label = "reset";
30 gpios = <&pinctrl 33 1>;
31 linux,code = <KEY_RESTART>;
32 };
33 };
34
35 gpio-leds {
36 compatible = "gpio-leds";
37
38 wps_green {
39 label = "AR-5315u:green:wps";
40 gpios = <&pinctrl 0 1>;
41 };
42 power_green {
43 label = "AR-5315u:green:power";
44 gpios = <&pinctrl 1 1>;
45 default-state = "on";
46 };
47 usb_green {
48 label = "AR-5315u:green:usb";
49 gpios = <&pinctrl 2 1>;
50 };
51 inet_green {
52 label = "AR-5315u:green:inet";
53 gpios = <&pinctrl 8 1>;
54 };
55 inet_red {
56 label = "AR-5315u:red:inet";
57 gpios = <&pinctrl 9 1>;
58 };
59 dsl_green {
60 label = "AR-5315u:green:dsl";
61 gpios = <&pinctrl 10 1>;
62 };
63 power_red {
64 label = "AR-5315u:red:power";
65 gpios = <&pinctrl 11 1>;
66 };
67 };
68 };
69
70 &hsspi {
71 status = "ok";
72
73 flash@0 {
74 compatible = "jedec,spi-nor";
75 spi-max-frequency = <62500000>;
76 spi-tx-bus-width = <2>;
77 spi-rx-bus-width = <2>;
78 reg = <0>;
79
80 #address-cells = <1>;
81 #size-cells = <1>;
82
83 partitions {
84 compatible = "fixed-partitions";
85 #address-cells = <1>;
86 #size-cells = <1>;
87
88 cfe@0 {
89 reg = <0x000000 0x010000>;
90 label = "cfe";
91 read-only;
92 };
93
94 linux@10000 {
95 reg = <0x010000 0xfe0000>;
96 label = "linux";
97 compatible = "brcm,bcm963xx-imagetag";
98 };
99
100 nvram@ff0000 {
101 reg = <0xff0000 0x010000>;
102 label = "nvram";
103 };
104 };
105 };
106 };
107
108 &pinctrl {
109 pinctrl-names = "default";
110 pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
111 &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
112 };
113
114 &uart0 {
115 status = "ok";
116 };