target/linux/brcm63xx/dts/wap-5813n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6368.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Comtrend WAP-5813n";
   9         compatible = "comtrend,wap-5813n", "brcm,bcm6368";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21                 debounce-interval = <60>;
  22
  23                 wlan {
  24                         label = "wlan";
  25                         gpios = <&pinctrl 32 1>;
  26                         linux,code = <KEY_WLAN>;
  27                 };
  28                 reset {
  29                         label = "reset";
  30                         gpios = <&pinctrl 34 1>;
  31                         linux,code = <KEY_RESTART>;
  32                 };
  33                 wps {
  34                         label = "wps";
  35                         gpios = <&pinctrl 35 1>;
  36                         linux,code = <KEY_WPS_BUTTON>;
  37                 };
  38         };
  39
  40         gpio-leds {
  41                 compatible = "gpio-leds";
  42
  43                 inet_green {
  44                         label = "WAP-5813n:green:inet";
  45                         gpios = <&pinctrl 5 0>;
  46                 };
  47                 power_green {
  48                         label = "WAP-5813n:green:power";
  49                         gpios = <&pinctrl 22 0>;
  50                         default-state = "on";
  51                 };
  52                 wps_green {
  53                         label = "WAP-5813n:green:wps";
  54                         gpios = <&pinctrl 23 1>;
  55                 };
  56                 power_red {
  57                         label = "WAP-5813n:red:power";
  58                         gpios = <&pinctrl 24 0>;
  59                 };
  60                 inet_red {
  61                         label = "WAP-5813n:red:inet";
  62                         gpios = <&pinctrl 31 0>;
  63                 };
  64         };
  65 };
  66
  67 &pflash {
  68         status = "ok";
  69
  70         partitions {
  71                 compatible = "fixed-partitions";
  72                 #address-cells = <1>;
  73                 #size-cells = <1>;
  74
  75                 cfe@0 {
  76                         label = "CFE";
  77                         reg = <0x000000 0x010000>;
  78                         read-only;
  79                 };
  80
  81                 linux@10000 {
  82                         label = "linux";
  83                         reg = <0x010000 0x7e0000>;
  84                         compatible = "brcm,bcm963xx-imagetag";
  85                 };
  86
  87                 nvram@7f0000 {
  88                         label = "nvram";
  89                         reg = <0x7f0000 0x010000>;
  90                 };
  91         };
  92 };
  93
  94 &lsspi {
  95         switch@0 {
  96                 compatible = "brcm,bcm53115";
  97                 reg = <0>;
  98                 spi-max-frequency = <781000>;
  99
 100                 lede,alias = "eth0";
 101
 102                 ports {
 103                         #address-cells = <1>;
 104                         #size-cells = <0>;
 105
 106                         lan@0 {
 107                                 reg = <0>;
 108                                 label = "lan4";
 109                         };
 110
 111                         lan@1 {
 112                                 reg = <1>;
 113                                 label = "lan3";
 114                         };
 115
 116                         lan@2 {
 117                                 reg = <2>;
 118                                 label = "lan2";
 119                         };
 120
 121                         lan@3 {
 122                                 reg = <3>;
 123                                 label = "lan1";
 124                         };
 125
 126                         wan@4 {
 127                                 reg = <4>;
 128                                 label = "wan";
 129                         };
 130
 131                         cpu@5 {
 132                                 reg = <5>;
 133                                 label = "cpu";
 134
 135                                 fixed-link {
 136                                         speed = <1000>;
 137                                         full-duplex;
 138                                         asym-pause;
 139                                         pause;
 140                                 };
 141                         };
 142                 };
 143         };
 144 };
 145
 146 &pinctrl {
 147         pinctrl-names = "default";
 148         pinctrl-0 = <&pinctrl_pci>;
 149 };
 150
 151 &uart0 {
 152         status = "ok";
 153 };