target/linux/gemini/image/Makefile

   1 #
   2 # Copyright (C) 2009-2018 OpenWrt.org
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7 include $(TOPDIR)/rules.mk
   8 include $(INCLUDE_DIR)/image.mk
   9
  10 # Cook a "WRGG" image, this board is apparently one in the D-Link
  11 # WRGG family and uses the exact same firmware format as other
  12 # D-Link devices.
  13 define Build/dir685-images
  14         mkwrggimg -i $(IMAGE_KERNEL) \
  15         -o $(BIN_DIR)/$(IMG_PREFIX)-dir685-fwupdate.bin \
  16         -d /dev/mtdblock/1 \
  17         -s wrgns01_dlwbr_dir685RBWW \
  18         -v 'N/A' \
  19         -m dir685 \
  20         -B 96bb
  21 endef
  22
  23 # Build D-Link DNS-313 images using the special header tool.
  24 # rootfs.tgz and rd.tgz contains nothing, we only need them
  25 # to satisfy the boot loader on the device. The zImage is
  26 # the only real content.
  27 define Build/dns313-images
  28         if [ -d $(BIN_DIR)/.boot ] ; then rm -rf $(BIN_DIR)/.boot ; fi
  29         mkdir -p $(BIN_DIR)/.boot
  30         echo "dummy" > $(BIN_DIR)/.boot/dummyfile
  31         dns313-header $(BIN_DIR)/.boot/dummyfile \
  32                 $(BIN_DIR)/.boot/rootfs.tgz
  33         dns313-header $(BIN_DIR)/.boot/dummyfile \
  34                 $(BIN_DIR)/.boot/rd.gz
  35         dns313-header $(IMAGE_KERNEL) \
  36                 $(BIN_DIR)/.boot/zImage
  37         rm -f $(BIN_DIR)/.boot/dummyfile
  38         (cd $(BIN_DIR); tar -czf $(IMG_PREFIX)-dns313-bootpart.tar.gz .boot)
  39         if [ -d $(BIN_DIR)/.boot ] ; then rm -rf $(BIN_DIR)/.boot ; fi
  40 endef
  41
  42 # Create the special NAS4220B image format with the squashfs
  43 # split across two "partitions" named rd.gz and hddapp.tgz but
  44 # essentially just being used by OpenWRT as one big partition
  45 define Build/nas4220b-images
  46         dd if=$(IMAGE_ROOTFS) of=$(BIN_DIR)/rd.gz bs=6144k conv=sync
  47         dd if=$(IMAGE_ROOTFS) of=$(BIN_DIR)/hddapp.tgz bs=6144k count=1 seek=1
  48         cp $(IMAGE_KERNEL) $(BIN_DIR)/zImage
  49         cp ./ImageInfo-ib4220 $(BIN_DIR)/ImageInfo
  50         (cd $(BIN_DIR); tar -czf $(IMG_PREFIX)-sysupgrade-ib4220b.tar.gz ImageInfo zImage rd.gz hddapp.tgz)
  51         mv $(BIN_DIR)/rd.gz $(BIN_DIR)/$(IMG_PREFIX)-nas4220b-rd.gz
  52         mv $(BIN_DIR)/hddapp.tgz $(BIN_DIR)/$(IMG_PREFIX)-nas4220b-hddapp.tgz
  53         mv $(BIN_DIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-nas4220b-zImage
  54         rm -f $(BIN_DIR)/ImageInfo
  55 endef
  56
  57 # WBD-111 and WBD-222:
  58 # work around the bootloader's bug with extra nops
  59 # FIXME: is this really needed now that we no longer append the code
  60 # to change the machine ID number? Needs testing on Wiliboard.
  61 define Build/wbd-nops
  62         mv $@ $@.tmp
  63         echo -en "\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $@
  64         cat $@.tmp >> $@
  65         rm -f $@.tmp
  66 endef
  67
  68 # All DTB files are prefixed with "gemini-"
  69 define Device/Default
  70         DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
  71         KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
  72         KERNEL_NAME := zImage
  73         KERNEL := kernel-bin | append-dtb
  74         FILESYSTEMS := squashfs
  75         IMAGE_NAME := $$(IMAGE_PREFIX)-$$(1).$$(2)
  76         BLOCKSIZE := 128k
  77         PAGESIZE := 2048
  78 endef
  79
  80 # A reasonable set of default packages handling the NAS type
  81 # of devices out of the box (former NAS42x0 IcyBox defaults)
  82 GEMINI_NAS_PACKAGES:=kmod-md-mod kmod-md-linear kmod-md-multipath \
  83                 kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-md-raid456 \
  84                 kmod-fs-btrfs kmod-fs-cifs kmod-fs-nfs \
  85                 kmod-fs-nfsd kmod-fs-ntfs kmod-fs-reiserfs kmod-fs-vfat \
  86                 kmod-nls-utf8 kmod-usb-storage-extras \
  87                 samba36-server mdadm cfdisk fdisk e2fsprogs badblocks
  88
  89 define Device/dlink-dir-685
  90         DEVICE_TITLE := D-Link DIR-685 Xtreme N Storage Router
  91         DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) \
  92                         kmod-switch-rtl8366rb swconfig
  93         IMAGES += dir685-image
  94         IMAGE/dir685-image := dir685-images
  95 endef
  96 TARGET_DEVICES += dlink-dir-685
  97
  98 define Device/dlink-dns-313
  99         DEVICE_TITLE := D-Link DNS-313 1-Bay Network Storage Enclosure
 100         DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
 101         IMAGES += dns313-image
 102         IMAGE/dns313-image := dns313-images
 103 endef
 104 TARGET_DEVICES += dlink-dns-313
 105
 106 define Device/nas4220b
 107         DEVICE_TITLE := Raidsonic NAS IB-4220-B
 108         IMAGES += nas4220b-image
 109         IMAGE/nas4220b-image := nas4220b-images
 110         DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
 111 endef
 112 TARGET_DEVICES += nas4220b
 113
 114 define Device/rut1xx
 115         DEVICE_TITLE := Teltonika RUT1xx
 116         DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
 117 endef
 118 TARGET_DEVICES += rut1xx
 119
 120 define Device/sq201
 121         DEVICE_TITLE := ITian Square One SQ201
 122         DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) rt61-pci-firmware
 123 endef
 124 TARGET_DEVICES += sq201
 125
 126 define Device/wbd111
 127         DEVICE_TITLE := Wiliboard WBD-111
 128         KERNEL := kernel-bin | append-dtb | wbd-nops
 129 endef
 130 TARGET_DEVICES += wbd111
 131
 132 define Device/wbd222
 133         DEVICE_TITLE := Wiliboard WBD-222
 134         KERNEL := kernel-bin | append-dtb | wbd-nops
 135 endef
 136 TARGET_DEVICES += wbd222
 137
 138 $(eval $(call BuildImage))