target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "ALFA Network AP120C-AC";
  10         compatible = "alfa-network,ap120c-ac";
  11
  12         aliases {
  13                 led-boot = &status;
  14                 led-failsafe = &status;
  15                 led-running = &status;
  16                 led-upgrade = &status;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys";
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
  25                         linux,code = <KEY_RESTART>;
  26                 };
  27         };
  28
  29         leds {
  30                 compatible = "gpio-leds";
  31
  32                 status: status {
  33                         label = "ap120c-ac:blue:status";
  34                         gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
  35                         default-state = "keep";
  36                 };
  37
  38                 wan {
  39                         label = "ap120c-ac:amber:wan";
  40                         gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
  41                 };
  42
  43                 wlan2g {
  44                         label = "ap120c-ac:green:wlan2g";
  45                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
  46                         linux,default-trigger = "phy0tpt";
  47                 };
  48
  49                 wlan5g {
  50                         label = "ap120c-ac:red:wlan5g";
  51                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
  52                         linux,default-trigger = "phy1tpt";
  53                 };
  54         };
  55
  56         soc {
  57                 rng@22000 {
  58                         status = "okay";
  59                 };
  60
  61                 mdio@90000 {
  62                         status = "okay";
  63
  64                         pinctrl-0 = <&mdio_pins>;
  65                         pinctrl-names = "default";
  66                 };
  67
  68                 ess-psgmii@98000 {
  69                         status = "okay";
  70                 };
  71
  72                 counter@4a1000 {
  73                         compatible = "qcom,qca-gcnt";
  74                         reg = <0x4a1000 0x4>;
  75                 };
  76
  77                 tcsr@1949000 {
  78                         compatible = "qcom,tcsr";
  79                         reg = <0x1949000 0x100>;
  80                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  81                 };
  82
  83                 tcsr@194b000 {
  84                         compatible = "qcom,tcsr";
  85                         reg = <0x194b000 0x100>;
  86                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  87                 };
  88
  89                 ess_tcsr@1953000 {
  90                         compatible = "qcom,tcsr";
  91                         reg = <0x1953000 0x1000>;
  92                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  93                 };
  94
  95                 tcsr@1957000 {
  96                         compatible = "qcom,tcsr";
  97                         reg = <0x1957000 0x100>;
  98                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  99                 };
 100
 101                 usb2@60f8800 {
 102                         status = "okay";
 103                 };
 104
 105                 usb3@8af8800 {
 106                         status = "okay";
 107
 108                         dwc3@8a00000 {
 109                                 phys = <&usb3_hs_phy>;
 110                                 phy-names = "usb2-phy";
 111                         };
 112                 };
 113
 114                 crypto@8e3a000 {
 115                         status = "okay";
 116                 };
 117
 118                 watchdog@b017000 {
 119                         status = "okay";
 120                 };
 121
 122                 qca8075: ess-switch@c000000 {
 123                         status = "okay";
 124
 125                         switch_lan_bmp = <0x10>;
 126                         switch_wan_bmp = <0x20>;
 127
 128                         #gpio-cells = <2>;
 129                         gpio-controller;
 130                 };
 131
 132                 edma@c080000 {
 133                         status = "okay";
 134                 };
 135         };
 136 };
 137
 138 &blsp_dma {
 139         status = "okay";
 140 };
 141
 142 &blsp1_i2c3 {
 143         status = "okay";
 144
 145         pinctrl-0 = <&i2c0_pins>;
 146         pinctrl-names = "default";
 147
 148         tpm@29 {
 149                 compatible = "atmel,at97sc3204t";
 150                 reg = <0x29>;
 151         };
 152 };
 153
 154 &blsp1_spi1 {
 155         status = "okay";
 156
 157         pinctrl-0 = <&spi0_pins>;
 158         pinctrl-names = "default";
 159         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
 160                    <&tlmm  4 GPIO_ACTIVE_HIGH>;
 161
 162         flash@0 {
 163                 compatible = "jedec,spi-nor";
 164                 reg = <0>;
 165                 spi-max-frequency = <24000000>;
 166
 167                 partitions {
 168                         compatible = "fixed-partitions";
 169                         #address-cells = <1>;
 170                         #size-cells = <1>;
 171
 172                         partition@0 {
 173                                 label = "SBL1";
 174                                 reg = <0x00000000 0x00040000>;
 175                                 read-only;
 176                         };
 177
 178                         partition@40000 {
 179                                 label = "MIBIB";
 180                                 reg = <0x00040000 0x00020000>;
 181                                 read-only;
 182                         };
 183
 184                         partition@60000 {
 185                                 label = "QSEE";
 186                                 reg = <0x00060000 0x00060000>;
 187                                 read-only;
 188                         };
 189
 190                         partition@c0000 {
 191                                 label = "CDT";
 192                                 reg = <0x000c0000 0x00010000>;
 193                                 read-only;
 194                         };
 195
 196                         partition@d0000 {
 197                                 label = "DDRPARAMS";
 198                                 reg = <0x000d0000 0x00010000>;
 199                                 read-only;
 200                         };
 201
 202                         partition@e0000 {
 203                                 label = "APPSBLENV";
 204                                 reg = <0x000e0000 0x00010000>;
 205                         };
 206
 207                         partition@f0000 {
 208                                 label = "APPSBL";
 209                                 reg = <0x000f0000 0x00080000>;
 210                                 read-only;
 211                         };
 212
 213                         partition@170000 {
 214                                 label = "ART";
 215                                 reg = <0x00170000 0x00010000>;
 216                                 read-only;
 217                         };
 218
 219                         partition@180000 {
 220                                 label = "priv_data1";
 221                                 reg = <0x00180000 0x00010000>;
 222                                 read-only;
 223                         };
 224
 225                         partition@190000 {
 226                                 label = "priv_data2";
 227                                 reg = <0x00190000 0x00010000>;
 228                                 read-only;
 229                         };
 230                 };
 231         };
 232
 233         nand@1 {
 234                 compatible = "spi-nand";
 235                 reg = <1>;
 236                 spi-max-frequency = <24000000>;
 237
 238                 partitions {
 239                         compatible = "fixed-partitions";
 240                         #address-cells = <1>;
 241                         #size-cells = <1>;
 242
 243                         partition@0 {
 244                                 label = "rootfs1";
 245                                 reg = <0x00000000 0x04000000>;
 246                         };
 247
 248                         partition@4000000 {
 249                                 label = "rootfs2";
 250                                 reg = <0x04000000 0x04000000>;
 251                         };
 252                 };
 253         };
 254 };
 255
 256 &blsp1_uart1 {
 257         status = "okay";
 258
 259         pinctrl-0 = <&serial0_pins>;
 260         pinctrl-names = "default";
 261 };
 262
 263 &cryptobam {
 264         status = "okay";
 265 };
 266
 267 &gmac0 {
 268         qcom,forced_duplex = <1>;
 269         qcom,forced_speed = <1000>;
 270         qcom,phy_mdio_addr = <3>;
 271         qcom,poll_required = <1>;
 272         vlan_tag = <1 0x10>;
 273 };
 274
 275 &gmac1 {
 276         qcom,forced_duplex = <1>;
 277         qcom,forced_speed = <1000>;
 278         qcom,phy_mdio_addr = <4>;
 279         qcom,poll_required = <1>;
 280         vlan_tag = <2 0x20>;
 281 };
 282
 283 &tlmm {
 284         i2c0_pins: i2c0_pinmux {
 285                 mux_i2c {
 286                         function = "blsp_i2c0";
 287                         pins = "gpio58", "gpio59";
 288                         drive-strength = <16>;
 289                         bias-disable;
 290                 };
 291         };
 292
 293         mdio_pins: mdio_pinmux {
 294                 mux_mdio {
 295                         pins = "gpio53";
 296                         function = "mdio";
 297                         bias-pull-up;
 298                 };
 299
 300                 mux_mdc {
 301                         pins = "gpio52";
 302                         function = "mdc";
 303                         bias-pull-up;
 304                 };
 305         };
 306
 307         serial0_pins: serial0_pinmux {
 308                 mux_uart {
 309                         pins = "gpio60", "gpio61";
 310                         function = "blsp_uart0";
 311                         bias-disable;
 312                 };
 313         };
 314
 315         spi0_pins: spi0_pinmux {
 316                 mux_spi {
 317                         function = "blsp_spi0";
 318                         pins = "gpio55", "gpio56", "gpio57";
 319                         drive-strength = <12>;
 320                         bias-disable;
 321                 };
 322
 323                 mux_cs {
 324                         function = "gpio";
 325                         pins = "gpio54", "gpio4";
 326                         drive-strength = <2>;
 327                         bias-disable;
 328                         output-high;
 329                 };
 330         };
 331 };
 332
 333 &usb2_hs_phy {
 334         status = "okay";
 335 };
 336
 337 &usb3_hs_phy {
 338         status = "okay";
 339 };
 340
 341 &wifi0 {
 342         status = "okay";
 343 };
 344
 345 &wifi1 {
 346         status = "okay";
 347 };