target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts

   1 #include "qcom-ipq8064-v1.0.dtsi"
   2
   3 / {
   4         model = "Qualcomm IPQ8064/DB149";
   5         compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
   6
   7         reserved-memory {
   8                 #address-cells = <1>;
   9                 #size-cells = <1>;
  10                 ranges;
  11                 rsvd@41200000 {
  12                         reg = <0x41200000 0x300000>;
  13                         no-map;
  14                 };
  15         };
  16
  17         alias {
  18                 serial0 = &uart2;
  19                 mdio-gpio0 = &mdio0;
  20         };
  21
  22         chosen {
  23                 stdout-path = "serial0:115200n8";
  24         };
  25
  26         soc {
  27                 pinmux@800000 {
  28                         i2c4_pins: i2c4_pinmux {
  29                                 pins = "gpio12", "gpio13";
  30                                 function = "gsbi4";
  31                                 bias-disable;
  32                         };
  33
  34                         spi_pins: spi_pins {
  35                                 mux {
  36                                         pins = "gpio18", "gpio19", "gpio21";
  37                                         function = "gsbi5";
  38                                         drive-strength = <10>;
  39                                         bias-none;
  40                                 };
  41                         };
  42
  43                         mdio0_pins: mdio0_pins {
  44                                 mux {
  45                                         pins = "gpio0", "gpio1";
  46                                         function = "gpio";
  47                                         drive-strength = <8>;
  48                                         bias-disable;
  49                                 };
  50                         };
  51
  52                         rgmii0_pins: rgmii0_pins {
  53                                 mux {
  54                                         pins = "gpio2", "gpio66";
  55                                         drive-strength = <8>;
  56                                         bias-disable;
  57                                 };
  58                         };
  59                 };
  60
  61                 gsbi2: gsbi@12480000 {
  62                         qcom,mode = <GSBI_PROT_I2C_UART>;
  63                         status = "ok";
  64                         uart2: serial@12490000 {
  65                                 status = "ok";
  66                         };
  67                 };
  68
  69                 gsbi5: gsbi@1a200000 {
  70                         qcom,mode = <GSBI_PROT_SPI>;
  71                         status = "ok";
  72
  73                         spi4: spi@1a280000 {
  74                                 status = "ok";
  75                                 spi-max-frequency = <50000000>;
  76
  77                                 pinctrl-0 = <&spi_pins>;
  78                                 pinctrl-names = "default";
  79
  80                                 cs-gpios = <&qcom_pinmux 20 0>;
  81
  82                                 flash: m25p80@0 {
  83                                         compatible = "s25fl256s1";
  84                                         #address-cells = <1>;
  85                                         #size-cells = <1>;
  86                                         spi-max-frequency = <50000000>;
  87                                         reg = <0>;
  88                                         m25p,fast-read;
  89
  90                                         partition@0 {
  91                                                 label = "lowlevel_init";
  92                                                 reg = <0x0 0x1b0000>;
  93                                         };
  94
  95                                         partition@1 {
  96                                                 label = "u-boot";
  97                                                 reg = <0x1b0000 0x80000>;
  98                                         };
  99
 100                                         partition@2 {
 101                                                 label = "u-boot-env";
 102                                                 reg = <0x230000 0x40000>;
 103                                         };
 104
 105                                         partition@3 {
 106                                                 label = "caldata";
 107                                                 reg = <0x270000 0x40000>;
 108                                         };
 109
 110                                         partition@4 {
 111                                                 label = "firmware";
 112                                                 reg = <0x2b0000 0x1d50000>;
 113                                         };
 114                                 };
 115                         };
 116                 };
 117
 118                 sata-phy@1b400000 {
 119                         status = "ok";
 120                 };
 121
 122                 sata@29000000 {
 123                         status = "ok";
 124                 };
 125
 126                 phy@100f8800 {          /* USB3 port 1 HS phy */
 127                         status = "ok";
 128                 };
 129
 130                 phy@100f8830 {          /* USB3 port 1 SS phy */
 131                         status = "ok";
 132                 };
 133
 134                 phy@110f8800 {          /* USB3 port 0 HS phy */
 135                         status = "ok";
 136                 };
 137
 138                 phy@110f8830 {          /* USB3 port 0 SS phy */
 139                         status = "ok";
 140                 };
 141
 142                 usb30@0 {
 143                         status = "ok";
 144                 };
 145
 146                 usb30@1 {
 147                         status = "ok";
 148                 };
 149
 150                 pcie0: pci@1b500000 {
 151                         status = "ok";
 152                 };
 153
 154                 pcie1: pci@1b700000 {
 155                         status = "ok";
 156                 };
 157
 158                 pcie2: pci@1b900000 {
 159                         status = "ok";
 160                 };
 161
 162                 mdio0: mdio {
 163                         compatible = "virtual,mdio-gpio";
 164                         #address-cells = <1>;
 165                         #size-cells = <0>;
 166                         gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
 167
 168                         pinctrl-0 = <&mdio0_pins>;
 169                         pinctrl-names = "default";
 170
 171                         phy0: ethernet-phy@0 {
 172                                 reg = <0>;
 173                                 qca,ar8327-initvals = <
 174                                         0x00004 0x7600000   /* PAD0_MODE */
 175                                         0x00008 0x1000000   /* PAD5_MODE */
 176                                         0x0000c 0x80        /* PAD6_MODE */
 177                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 178                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 179                                         0x0007c 0x4e        /* PORT0_STATUS */
 180                                         0x00094 0x4e        /* PORT6_STATUS */
 181                                 >;
 182                         };
 183
 184                         phy4: ethernet-phy@4 {
 185                                 reg = <4>;
 186                         };
 187
 188                         phy6: ethernet-phy@6 {
 189                                 reg = <6>;
 190                         };
 191
 192                         phy7: ethernet-phy@7 {
 193                                 reg = <7>;
 194                         };
 195                 };
 196
 197                 gmac0: ethernet@37000000 {
 198                         status = "ok";
 199                         phy-mode = "rgmii";
 200                         qcom,id = <0>;
 201                         phy-handle = <&phy4>;
 202
 203                         pinctrl-0 = <&rgmii0_pins>;
 204                         pinctrl-names = "default";
 205                 };
 206
 207                 gmac1: ethernet@37200000 {
 208                         status = "ok";
 209                         phy-mode = "sgmii";
 210                         qcom,id = <1>;
 211
 212                         fixed-link {
 213                                 speed = <1000>;
 214                                 full-duplex;
 215                         };
 216                 };
 217
 218                 gmac2: ethernet@37400000 {
 219                         status = "ok";
 220                         phy-mode = "sgmii";
 221                         qcom,id = <2>;
 222                         phy-handle = <&phy6>;
 223                 };
 224
 225                 gmac3: ethernet@37600000 {
 226                         status = "ok";
 227                         phy-mode = "sgmii";
 228                         qcom,id = <3>;
 229                         phy-handle = <&phy7>;
 230                 };
 231         };
 232 };