target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts

   1 #include "qcom-ipq8064-v2.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "TP-Link Archer VR2600v";
   7         compatible = "tplink,vr2600v", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0x1e000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22         };
  23
  24         aliases {
  25                 serial0 = &gsbi4_serial;
  26                 mdio-gpio0 = &mdio0;
  27
  28                 led-boot = &power;
  29                 led-failsafe = &general;
  30                 led-running = &power;
  31                 led-upgrade = &general;
  32         };
  33
  34         chosen {
  35                 stdout-path = "serial0:115200n8";
  36         };
  37
  38         soc {
  39                 pinmux@800000 {
  40                         led_pins: led_pins {
  41                                 mux {
  42                                         pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
  43                                                 "gpio26", "gpio53", "gpio56", "gpio66";
  44                                         function = "gpio";
  45                                         drive-strength = <2>;
  46                                         bias-pull-up;
  47                                 };
  48                         };
  49
  50                         i2c4_pins: i2c4_pinmux {
  51                                 mux {
  52                                         pins = "gpio12", "gpio13";
  53                                         function = "gsbi4";
  54                                         drive-strength = <12>;
  55                                         bias-disable;
  56                                 };
  57                         };
  58
  59                         button_pins: button_pins {
  60                                 mux {
  61                                         pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
  62                                         function = "gpio";
  63                                         drive-strength = <2>;
  64                                         bias-pull-up;
  65                                 };
  66                         };
  67
  68                         spi_pins: spi_pins {
  69                                 mux {
  70                                         pins = "gpio18", "gpio19", "gpio21";
  71                                         function = "gsbi5";
  72                                         bias-pull-down;
  73                                 };
  74
  75                                 data {
  76                                         pins = "gpio18", "gpio19";
  77                                         drive-strength = <10>;
  78                                 };
  79
  80                                 cs {
  81                                         pins = "gpio20";
  82                                         drive-strength = <10>;
  83                                         bias-pull-up;
  84                                 };
  85
  86                                 clk {
  87                                         pins = "gpio21";
  88                                         drive-strength = <12>;
  89                                 };
  90                         };
  91
  92                         mdio0_pins: mdio0_pins {
  93                                 mux {
  94                                         pins = "gpio0", "gpio1";
  95                                         function = "gpio";
  96                                         drive-strength = <8>;
  97                                         bias-disable;
  98                                 };
  99                         };
 100
 101                         rgmii2_pins: rgmii2_pins {
 102                                 mux {
 103                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 104                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 105                                         function = "rgmii2";
 106                                         drive-strength = <8>;
 107                                         bias-disable;
 108                                 };
 109                         };
 110                 };
 111
 112                 gsbi@16300000 {
 113                         qcom,mode = <GSBI_PROT_I2C_UART>;
 114                         status = "okay";
 115                         serial@16340000 {
 116                                 status = "okay";
 117                         };
 118                         /*
 119                          * The i2c device on gsbi4 should not be enabled.
 120                          * On ipq806x designs gsbi4 i2c is meant for exclusive
 121                          * RPM usage. Turning this on in kernel manifests as
 122                          * i2c failure for the RPM.
 123                          */
 124                 };
 125
 126                 gsbi5: gsbi@1a200000 {
 127                         qcom,mode = <GSBI_PROT_SPI>;
 128                         status = "okay";
 129
 130                         spi4: spi@1a280000 {
 131                                 status = "okay";
 132
 133                                 pinctrl-0 = <&spi_pins>;
 134                                 pinctrl-names = "default";
 135
 136                                 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 137
 138                                 flash: W25Q128@0 {
 139                                         compatible = "jedec,spi-nor";
 140                                         #address-cells = <1>;
 141                                         #size-cells = <1>;
 142                                         spi-max-frequency = <50000000>;
 143                                         reg = <0>;
 144
 145                                         SBL1@0 {
 146                                                 label = "SBL1";
 147                                                 reg = <0x0 0x20000>;
 148                                                 read-only;
 149                                         };
 150
 151                                         MIBIB@20000 {
 152                                                 label = "MIBIB";
 153                                                 reg = <0x20000 0x20000>;
 154                                                 read-only;
 155                                         };
 156
 157                                         SBL2@40000 {
 158                                                 label = "SBL2";
 159                                                 reg = <0x40000 0x40000>;
 160                                                 read-only;
 161                                         };
 162
 163                                         SBL3@80000 {
 164                                                 label = "SBL3";
 165                                                 reg = <0x80000 0x80000>;
 166                                                 read-only;
 167                                         };
 168
 169                                         DDRCONFIG@100000 {
 170                                                 label = "DDRCONFIG";
 171                                                 reg = <0x100000 0x10000>;
 172                                                 read-only;
 173                                         };
 174
 175                                         SSD@110000 {
 176                                                 label = "SSD";
 177                                                 reg = <0x110000 0x10000>;
 178                                                 read-only;
 179                                         };
 180
 181                                         TZ@120000 {
 182                                                 label = "TZ";
 183                                                 reg = <0x120000 0x80000>;
 184                                                 read-only;
 185                                         };
 186
 187                                         RPM@1a0000 {
 188                                                 label = "RPM";
 189                                                 reg = <0x1a0000 0x80000>;
 190                                                 read-only;
 191                                         };
 192
 193                                         APPSBL@220000 {
 194                                                 label = "APPSBL";
 195                                                 reg = <0x220000 0x80000>;
 196                                                 read-only;
 197                                         };
 198
 199                                         APPSBLENV@2a0000 {
 200                                                 label = "APPSBLENV";
 201                                                 reg = <0x2a0000 0x40000>;
 202                                                 read-only;
 203                                         };
 204
 205                                         OLDART@2e0000 {
 206                                                 label = "OLDART";
 207                                                 reg = <0x2e0000 0x40000>;
 208                                                 read-only;
 209                                         };
 210
 211                                         kernel@320000 {
 212                                                 label = "kernel";
 213                                                 reg = <0x320000 0x300000>;
 214                                         };
 215
 216                                         rootfs@620000 {
 217                                                 label = "rootfs";
 218                                                 reg = <0x620000 0x960000>;
 219                                         };
 220
 221                                         defaultmac: default-mac@0xfaf100 {
 222                                                 label = "default-mac";
 223                                                 reg = <0xfaf100 0x00200>;
 224                                                 read-only;
 225                                         };
 226
 227                                         ART@fc0000 {
 228                                                 label = "ART";
 229                                                 reg = <0xfc0000 0x40000>;
 230                                                 read-only;
 231                                         };
 232                                 };
 233                         };
 234                 };
 235
 236                 usb3_0: usb3@110f8800 {
 237                         status = "okay";
 238                 };
 239
 240                 usb3_1: usb3@100f8800 {
 241                         status = "okay";
 242                 };
 243
 244                 pcie0: pci@1b500000 {
 245                         status = "okay";
 246                 };
 247
 248                 pcie1: pci@1b700000 {
 249                         status = "okay";
 250                         force_gen1 = <1>;
 251                 };
 252
 253                 mdio0: mdio {
 254                         compatible = "virtual,mdio-gpio";
 255                         #address-cells = <1>;
 256                         #size-cells = <0>;
 257                         gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 258                         pinctrl-0 = <&mdio0_pins>;
 259                         pinctrl-names = "default";
 260
 261                         phy0: ethernet-phy@0 {
 262                                 reg = <0>;
 263                                 qca,ar8327-initvals = <
 264                                         0x00004 0x7600000   /* PAD0_MODE */
 265                                         0x00008 0x1000000   /* PAD5_MODE */
 266                                         0x0000c 0x80        /* PAD6_MODE */
 267                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 268                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 269                                         0x0007c 0x4e        /* PORT0_STATUS */
 270                                         0x00094 0x4e        /* PORT6_STATUS */
 271                                         >;
 272                         };
 273
 274                         phy4: ethernet-phy@4 {
 275                                 reg = <4>;
 276                         };
 277                 };
 278
 279                 gmac1: ethernet@37200000 {
 280                         status = "okay";
 281                         phy-mode = "rgmii";
 282                         qcom,id = <1>;
 283
 284                         pinctrl-0 = <&rgmii2_pins>;
 285                         pinctrl-names = "default";
 286
 287                         mtd-mac-address = <&defaultmac 0>;
 288                         mtd-mac-address-increment = <1>;
 289
 290                         fixed-link {
 291                                 speed = <1000>;
 292                                 full-duplex;
 293                         };
 294                 };
 295
 296                 gmac2: ethernet@37400000 {
 297                         status = "okay";
 298                         phy-mode = "sgmii";
 299                         qcom,id = <2>;
 300
 301                         mtd-mac-address = <&defaultmac 0>;
 302
 303                         fixed-link {
 304                                 speed = <1000>;
 305                                 full-duplex;
 306                         };
 307                 };
 308         };
 309
 310         keys {
 311                 compatible = "gpio-keys";
 312                 pinctrl-0 = <&button_pins>;
 313                 pinctrl-names = "default";
 314
 315                 wifi {
 316                         label = "wifi";
 317                         gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 318                         linux,code = <KEY_RFKILL>;
 319                 };
 320
 321                 reset {
 322                         label = "reset";
 323                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
 324                         linux,code = <KEY_RESTART>;
 325                 };
 326
 327                 wps {
 328                         label = "wps";
 329                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 330                         linux,code = <KEY_WPS_BUTTON>;
 331                 };
 332
 333                 dect {
 334                         label = "dect";
 335                         gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
 336                         linux,code = <KEY_PHONE>;
 337                 };
 338
 339                 ledswitch {
 340                         label = "ledswitch";
 341                         gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
 342                         linux,code = <KEY_LIGHTS_TOGGLE>;
 343                 };
 344         };
 345
 346         leds {
 347                 compatible = "gpio-leds";
 348                 pinctrl-0 = <&led_pins>;
 349                 pinctrl-names = "default";
 350
 351                 dsl {
 352                         label = "vr2600v:white:dsl";
 353                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 354                 };
 355
 356                 usb {
 357                         label = "vr2600v:white:usb";
 358                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 359                 };
 360
 361                 lan {
 362                         label = "vr2600v:white:lan";
 363                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 364                 };
 365
 366                 wlan2g {
 367                         label = "vr2600v:white:wlan2g";
 368                         gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
 369                 };
 370
 371                 wlan5g {
 372                         label = "vr2600v:white:wlan5g";
 373                         gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
 374                 };
 375
 376                 power: power {
 377                         label = "vr2600v:white:power";
 378                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 379                         default-state = "keep";
 380                 };
 381
 382                 phone {
 383                         label = "vr2600v:white:phone";
 384                         gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 385                 };
 386
 387                 wan {
 388                         label = "vr2600v:white:wan";
 389                         gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
 390                 };
 391
 392                 general: general {
 393                         label = "vr2600v:white:general";
 394                         gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
 395                 };
 396         };
 397 };
 398
 399 &adm_dma {
 400         status = "okay";
 401 };