target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch

   1 --- /dev/null
   2 +++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
   3 @@ -0,0 +1,117 @@
   4 +/dts-v1/;
   5 +
   6 +/include/ "kirkwood.dtsi"
   7 +/include/ "kirkwood-6281.dtsi"
   8 +
   9 +/ {
  10 +       model = "Cloud Engines Pogoplug E02";
  11 +       compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", "marvell,kirkwood";
  12 +
  13 +       memory {
  14 +               device_type = "memory";
  15 +               reg = <0x00000000 0x10000000>;
  16 +       };
  17 +
  18 +       chosen {
  19 +               bootargs = "console=ttyS0,115200n8 earlyprintk";
  20 +       };
  21 +
  22 +       ocp@f1000000 {
  23 +               pinctrl: pinctrl@10000 {
  24 +
  25 +                       pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
  26 +                                     &pmx_led_green >;
  27 +                       pinctrl-names = "default";
  28 +
  29 +                       pmx_usb_power_enable: pmx-usb-power-enable {
  30 +                               marvell,pins = "mpp29";
  31 +                               marvell,function = "gpio";
  32 +                       };
  33 +                       pmx_led_green: pmx-led_green {
  34 +                               marvell,pins = "mpp48";
  35 +                               marvell,function = "gpio";
  36 +                       };
  37 +                       pmx_led_orange: pmx-led_orange {
  38 +                               marvell,pins = "mpp49";
  39 +                               marvell,function = "gpio";
  40 +                       };
  41 +               };
  42 +
  43 +               serial@12000 {
  44 +                       status = "okay";
  45 +               };
  46 +
  47 +               nand@3000000 {
  48 +                       status = "okay";
  49 +
  50 +                       partition@0 {
  51 +                               label = "u-boot";
  52 +                               reg = <0x0000000 0x100000>;
  53 +                       };
  54 +
  55 +                       partition@100000 {
  56 +                               label = "uImage";
  57 +                               reg = <0x0100000 0x400000>;
  58 +                       };
  59 +
  60 +                       partition@500000 {
  61 +                               label = "rootfs";
  62 +                               reg = <0x0500000 0x2000000>;
  63 +                       };
  64 +
  65 +                       partition@2500000 {
  66 +                               label = "data";
  67 +                               reg = <0x2500000 0x5b00000>;
  68 +                       };
  69 +               };
  70 +       };
  71 +
  72 +       gpio-leds {
  73 +               compatible = "gpio-leds";
  74 +
  75 +               health {
  76 +                       label = "status:green:health";
  77 +                       gpios = <&gpio1 16 1>;
  78 +                       linux,default-trigger = "default-on";
  79 +               };
  80 +               fault {
  81 +                       label = "status:orange:fault";
  82 +                       gpios = <&gpio1 17 1>;
  83 +               };
  84 +       };
  85 +
  86 +       regulators {
  87 +               compatible = "simple-bus";
  88 +               #address-cells = <1>;
  89 +               #size-cells = <0>;
  90 +
  91 +               usb_power: regulator@1 {
  92 +                       compatible = "regulator-fixed";
  93 +                       reg = <1>;
  94 +                       regulator-name = "USB Power";
  95 +                       regulator-min-microvolt = <5000000>;
  96 +                       regulator-max-microvolt = <5000000>;
  97 +                       enable-active-high;
  98 +                       regulator-always-on;
  99 +                       regulator-boot-on;
 100 +                       gpio = <&gpio0 29 0>;
 101 +               };
 102 +       };
 103 +};
 104 +
 105 +&mdio {
 106 +       status = "okay";
 107 +
 108 +       ethphy0: ethernet-phy@0 {
 109 +               device_type = "ethernet-phy";
 110 +               reg = <0>;
 111 +       };
 112 +};
 113 +
 114 +&eth0 {
 115 +       status = "okay";
 116 +
 117 +       ethernet0-port@0 {
 118 +               phy-handle = <&ethphy0>;
 119 +       };
 120 +};
 121 --- a/arch/arm/boot/dts/Makefile
 122 +++ b/arch/arm/boot/dts/Makefile
 123 @@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-
 124         kirkwood-ns2max.dtb \
 125         kirkwood-ns2mini.dtb \
 126         kirkwood-nsa310.dtb \
 127 +       kirkwood-pogo_e02.dtb \
 128         kirkwood-topkick.dtb \
 129         kirkwood-ts219-6281.dtb \
 130         kirkwood-ts219-6282.dtb \