target/linux/kirkwood/patches-3.18/180-goflexhome.patch

   1 Index: linux-3.18.27/arch/arm/boot/dts/Makefile
   2 ===================================================================
   3 --- linux-3.18.27.orig/arch/arm/boot/dts/Makefile
   4 +++ linux-3.18.27/arch/arm/boot/dts/Makefile
   5 @@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
   6         kirkwood-ds411.dtb \
   7         kirkwood-ds411j.dtb \
   8         kirkwood-ds411slim.dtb \
   9 +       kirkwood-goflexhome.dtb \
  10         kirkwood-goflexnet.dtb \
  11         kirkwood-guruplug-server-plus.dtb \
  12         kirkwood-ib62x0.dtb \
  13 Index: linux-3.18.27/arch/arm/boot/dts/kirkwood-goflexhome.dts
  14 ===================================================================
  15 --- /dev/null
  16 +++ linux-3.18.27/arch/arm/boot/dts/kirkwood-goflexhome.dts
  17 @@ -0,0 +1,117 @@
  18 +/dts-v1/;
  19 +
  20 +#include "kirkwood.dtsi"
  21 +#include "kirkwood-6281.dtsi"
  22 +
  23 +/ {
  24 +       model = "Seagate GoFlex Home";
  25 +       compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
  26 +
  27 +       memory {
  28 +               device_type = "memory";
  29 +               reg = <0x00000000 0x8000000>;
  30 +       };
  31 +
  32 +       chosen {
  33 +               bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
  34 +               stdout-path = &uart0;
  35 +       };
  36 +
  37 +       ocp@f1000000 {
  38 +               pinctrl: pin-controller@10000 {
  39 +                       pmx_usb_power_enable: pmx-usb-power-enable {
  40 +                               marvell,pins = "mpp29";
  41 +                               marvell,function = "gpio";
  42 +                       };
  43 +                       pmx_led_white: pmx-led-white {
  44 +                               marvell,pins = "mpp40";
  45 +                               marvell,function = "gpio";
  46 +                       };
  47 +                       pmx_led_green: pmx-led_green {
  48 +                               marvell,pins = "mpp46";
  49 +                               marvell,function = "gpio";
  50 +                       };
  51 +                       pmx_led_orange: pmx-led-orange {
  52 +                               marvell,pins = "mpp47";
  53 +                               marvell,function = "gpio";
  54 +                       };
  55 +               };
  56 +               serial@12000 {
  57 +                       status = "ok";
  58 +               };
  59 +
  60 +               sata@80000 {
  61 +                       status = "okay";
  62 +                       nr-ports = <2>;
  63 +               };
  64 +
  65 +       };
  66 +       gpio-leds {
  67 +               compatible = "gpio-leds";
  68 +
  69 +               health {
  70 +                       label = "status:green:health";
  71 +                       gpios = <&gpio1 14 1>;
  72 +                       linux,default-trigger = "default-on";
  73 +               };
  74 +               fault {
  75 +                       label = "status:orange:fault";
  76 +                       gpios = <&gpio1 15 1>;
  77 +               };
  78 +               misc {
  79 +                       label = "status:white:misc";
  80 +                       gpios = <&gpio1 8 1>;
  81 +                       linux,default-trigger = "ide-disk";
  82 +               };
  83 +       };
  84 +       regulators {
  85 +               compatible = "simple-bus";
  86 +               #address-cells = <1>;
  87 +               #size-cells = <0>;
  88 +               pinctrl-0 = <&pmx_usb_power_enable>;
  89 +               pinctrl-names = "default";
  90 +
  91 +               usb_power: regulator@1 {
  92 +                       compatible = "regulator-fixed";
  93 +                       reg = <1>;
  94 +                       regulator-name = "USB Power";
  95 +                       regulator-min-microvolt = <5000000>;
  96 +                       regulator-max-microvolt = <5000000>;
  97 +                       enable-active-high;
  98 +                       regulator-always-on;
  99 +                       regulator-boot-on;
 100 +                       gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 101 +               };
 102 +       };
 103 +};
 104 +
 105 +&nand {
 106 +       chip-delay = <40>;
 107 +       status = "okay";
 108 +
 109 +       partition@0 {
 110 +               label = "u-boot";
 111 +               reg = <0x0000000 0x100000>;
 112 +               read-only;
 113 +       };
 114 +
 115 +       partition@100000 {
 116 +               label = "ubi";
 117 +               reg = <0x100000 0xfc00000>;
 118 +       };
 119 +};
 120 +
 121 +&mdio {
 122 +       status = "okay";
 123 +
 124 +       ethphy0: ethernet-phy@0 {
 125 +               reg = <0>;
 126 +       };
 127 +};
 128 +
 129 +&eth0 {
 130 +       status = "okay";
 131 +       ethernet0-port@0 {
 132 +               phy-handle = <&ethphy0>;
 133 +       };
 134 +};