target/linux/lantiq/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011-2015 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7 . /lib/functions/system.sh
   8 . /lib/functions/lantiq.sh
   9
  10 board_config_update
  11
  12 vpi=1
  13 vci=32
  14 annex="a"
  15 encaps="llc"
  16 payload="bridged"
  17 lan_mac=""
  18 wan_mac=""
  19 interface_wan=""
  20
  21 board=$(lantiq_board_name)
  22
  23 case "$board" in
  24 ACMP252|GIGASX76X)
  25         ucidef_add_switch "switch0" \
  26                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
  27         ;;
  28
  29 ARV4510PW)
  30         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  31         wan_mac=$(macaddr_add "$lan_mac" 1)
  32         ucidef_add_switch "switch0" \
  33                 "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
  34         ;;
  35
  36 ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
  37         ucidef_add_switch "switch0" \
  38                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
  39         ;;
  40
  41 ARV4520PW)
  42         ucidef_add_switch "switch0" \
  43                 "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
  44         ;;
  45
  46 ARV7506PW11)
  47         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
  48         ucidef_add_switch "switch0" \
  49                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
  50         ;;
  51
  52 ARV7519PW)
  53         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
  54         ucidef_add_switch "switch0" \
  55                 "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
  56         ;;
  57
  58 ARV7519RW22)
  59         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
  60         ucidef_add_switch "switch0" \
  61                 "0:lan" "2:lan" "3:lan" "4:lan" "5:lan" "6t@eth0"
  62         ;;
  63
  64 BTHOMEHUBV2B)
  65         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  66         wan_mac=$(macaddr_add "$lan_mac" 1)
  67         ucidef_add_switch "switch0" \
  68                 "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
  69         ;;
  70
  71 BTHOMEHUBV3A)
  72         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  73         wan_mac=$(macaddr_add "$lan_mac" 1)
  74         ucidef_set_interface_lan 'eth0'
  75         ;;
  76
  77 BTHOMEHUBV5A)
  78         wan_mac=$(macaddr_add "$(mtd_get_mac_binary caldata 4364)" 1)
  79         ucidef_add_switch "switch0" \
  80                 "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
  81         ;;
  82
  83 DGN3500*)
  84         ucidef_add_switch "switch0" \
  85                 "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
  86         ;;
  87
  88 EASY80920NAND|EASY80920NOR)
  89         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  90         wan_mac=$(macaddr_add "$lan_mac" 1)
  91         ucidef_add_switch "switch0" \
  92                 "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
  93         ;;
  94
  95 FRITZ7360SL)
  96         ucidef_add_switch "switch0" \
  97                 "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
  98         ;;
  99
 100 H201L)
 101         ucidef_add_switch "switch0" \
 102                 "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
 103         ;;
 104
 105 P2601HNFX)
 106         ucidef_add_switch "switch0" \
 107                 "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
 108         ;;
 109
 110 P2812HNUF*)
 111         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 112         wan_mac=$(macaddr_add "$lan_mac" 1)
 113         ucidef_add_switch "switch0" \
 114                 "0:lan" "1:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 115         ;;
 116
 117 TDW8970|TDW8980)
 118         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
 119         ucidef_add_switch "switch0" \
 120                 "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
 121         ;;
 122
 123 VR200v)
 124         wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
 125         ucidef_add_switch "switch0" \
 126                 "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 127         ;;
 128
 129 VGV7510KW22)
 130         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 131         ucidef_add_switch "switch0" \
 132                 "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "6t@eth0"
 133         ;;
 134
 135 VGV7519)
 136         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 137         ucidef_add_switch "switch0" \
 138                 "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "6t@eth0"
 139         ;;
 140
 141 WBMR)
 142         ucidef_add_switch "switch0" \
 143                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 144         ;;
 145
 146 WBMR300)
 147         lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
 148         wan_mac="$lan_mac"
 149         ucidef_add_switch "switch0" \
 150                 "2:lan:2" "3:lan:3" "5:lan:4" "4:wan:1" "6t@eth0"
 151         ;;
 152
 153 *)
 154         ucidef_set_interface_lan 'eth0'
 155         ;;
 156
 157 esac
 158
 159 if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
 160         ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
 161 fi
 162
 163 if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
 164         interface_wan="ptm0"
 165         ucidef_add_vdsl_modem "$annex" "av" "ptm"
 166 else
 167         interface_wan="nas0"
 168         ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 169 fi
 170
 171 ucidef_set_interface_wan "$interface_wan" "pppoe"
 172
 173 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
 174 [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
 175
 176 board_config_flush
 177
 178 exit 0