target/linux/ramips/dts/3G300M.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "3G300M", "ralink,rt3052-soc";
   7         model = "Tenda 3G300M";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 3grouter {
  13                         label = "3g300m:blue:3grouter";
  14                         gpios = <&gpio0 11 1>;
  15                 };
  16
  17                 ap {
  18                         label = "3g300m:blue:ap";
  19                         gpios = <&gpio0 12 1>;
  20                 };
  21
  22                 wisprouter {
  23                         label = "3g300m:blue:wisprouter";
  24                         gpios = <&gpio0 9 1>;
  25                 };
  26
  27                 wirelessrouter {
  28                         label = "3g300m:blue:wirelessrouter";
  29                         gpios = <&gpio0 13 1>;
  30                 };
  31
  32                 3g {
  33                         label = "3g300m:blue:3g";
  34                         gpios = <&gpio0 7 1>;
  35                 };
  36
  37                 wpsreset {
  38                         label = "3g300m:blue:wpsreset";
  39                         gpios = <&gpio0 14 1>;
  40                 };
  41         };
  42
  43         gpio-keys-polled {
  44                 compatible = "gpio-keys-polled";
  45                 #address-cells = <1>;
  46                 #size-cells = <0>;
  47                 poll-interval = <20>;
  48
  49                 reset {
  50                         label = "reset";
  51                         gpios = <&gpio0 0 1>;
  52                         linux,code = <0x198>;
  53                 };
  54
  55                 mode {
  56                         label = "mode";
  57                         gpios = <&gpio0 10 1>;
  58                         linux,code = <0x100>;
  59                 };
  60         };
  61 };
  62
  63 &spi0 {
  64         status = "okay";
  65
  66         m25p80@0 {
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 linux,modalias = "m25p80", "mx25l3205d";
  72                 spi-max-frequency = <10000000>;
  73
  74                 partition@0 {
  75                         label = "u-boot";
  76                         reg = <0x0 0x30000>;
  77                         read-only;
  78                 };
  79
  80                 partition@30000 {
  81                         label = "u-boot-env";
  82                         reg = <0x30000 0x10000>;
  83                         read-only;
  84                 };
  85
  86                 factory: partition@40000 {
  87                         label = "factory";
  88                         reg = <0x40000 0x10000>;
  89                         read-only;
  90                 };
  91
  92                 partition@50000 {
  93                         label = "firmware";
  94                         reg = <0x50000 0x3b0000>;
  95                 };
  96         };
  97 };
  98
  99 &pinctrl {
 100         state_default: pinctrl0 {
 101                 gpio {
 102                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
 103                         ralink,function = "gpio";
 104                 };
 105         };
 106 };
 107
 108 &ethernet {
 109         mtd-mac-address = <&factory 0x4>;
 110 };
 111
 112 &esw {
 113         mediatek,portmap = <0x2f>;
 114 };
 115
 116 &wmac {
 117         ralink,mtd-eeprom = <&factory 0>;
 118 };
 119
 120 &otg {
 121         status = "okay";
 122 };