target/linux/ramips/dts/ArcherC50.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/gpio/gpio.h>
   7
   8 / {
   9         compatible = "tplink,c50", "ralink,mt7620a-soc";
  10         model = "TP-Link Archer C50";
  11
  12         aliases {
  13                 led-status = &led_power;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 lan {
  24                         label = "c50:green:lan";
  25                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 led_power: power {
  29                         label = "c50:green:power";
  30                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  31                         default-state = "on";
  32                 };
  33
  34                 usb {
  35                         label = "c50:green:usb";
  36                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wan {
  40                         label = "c50:green:wan";
  41                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wan_orange {
  45                         label = "c50:orange:wan";
  46                         gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wlan5g {
  50                         label = "c50:green:wlan5g";
  51                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 wlan2g {
  55                         label = "c50:green:wlan2g";
  56                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 wps {
  60                         label = "c50:green:wps";
  61                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  62                 };
  63         };
  64
  65         gpio-keys-polled {
  66                 compatible = "gpio-keys-polled";
  67                 poll-interval = <20>;
  68
  69                 reset {
  70                         label = "reset";
  71                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  72                         linux,code = <KEY_RESTART>;
  73                 };
  74
  75                 rfkill {
  76                         label = "rfkill";
  77                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  78                         linux,code = <KEY_RFKILL>;
  79                 };      };
  80 };
  81
  82 &gpio1 {
  83         status = "okay";
  84 };
  85
  86 &gpio2 {
  87         status = "okay";
  88 };
  89
  90 &gpio3 {
  91         status = "okay";
  92 };
  93
  94 &spi0 {
  95         status = "okay";
  96
  97         m25p80@0 {
  98                 compatible = "jedec,spi-nor";
  99                 reg = <0>;
 100                 spi-max-frequency = <10000000>;
 101
 102                 partitions {
 103                         compatible = "fixed-partitions";
 104                         #address-cells = <1>;
 105                         #size-cells = <1>;
 106
 107                         partition@0 {
 108                                 label = "u-boot";
 109                                 reg = <0x0 0x20000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@20000 {
 114                                 label = "firmware";
 115                                 reg = <0x20000 0x7a0000>;
 116                         };
 117
 118                         partition@7c0000 {
 119                                 label = "config";
 120                                 reg = <0x7c0000 0x10000>;
 121                                 read-only;
 122                         };
 123
 124                         rom: partition@7d0000 {
 125                                 label = "rom";
 126                                 reg = <0x7d0000 0x10000>;
 127                                 read-only;
 128                         };
 129
 130                         partition@7e0000 {
 131                                 label = "romfile";
 132                                 reg = <0x7e0000 0x10000>;
 133                                 read-only;
 134                         };
 135
 136                         radio: partition@7f0000 {
 137                                 label = "radio";
 138                                 reg = <0x7f0000 0x10000>;
 139                                 read-only;
 140                         };
 141                 };
 142         };
 143 };
 144
 145 &pinctrl {
 146         state_default: pinctrl0 {
 147                 gpio {
 148                         ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
 149                         ralink,function = "gpio";
 150                 };
 151         };
 152 };
 153
 154 &ethernet {
 155                 pinctrl-names = "default";
 156                 mtd-mac-address = <&rom 0xf100>;
 157                 mediatek,portmap = "wllll";
 158         };
 159
 160 &ehci {
 161         status = "okay";
 162 };
 163
 164 &ohci {
 165         status = "okay";
 166 };
 167
 168 &gsw {
 169         mediatek,port4 = "ephy";
 170 };
 171
 172 &wmac {
 173         ralink,mtd-eeprom = <&radio 0>;
 174         mtd-mac-address = <&rom 0xf100>;
 175         mtd-mac-address-increment = <(-2)>;
 176         pinctrl-names = "default";
 177         pinctrl-0 = <&pa_pins>;
 178 };
 179
 180 &pcie {
 181         status = "okay";
 182 };
 183
 184 &pcie0 {
 185         mt76@0,0 {
 186                 reg = <0x0000 0 0 0 0>;
 187                 mediatek,mtd-eeprom = <&radio 32768>;
 188                 ieee80211-freq-limit = <5000000 6000000>;
 189                 mtd-mac-address = <&rom 0xf100>;
 190                 mtd-mac-address-increment = <(-1)>;
 191         };
 192 };