target/linux/ramips/dts/BC2.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "BC2", "ralink,rt3052-soc";
   7         model = "NexAira BC2";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
  12                         ralink,gpiomux = "jtag";
  13                         ralink,uartmux = "gpio";
  14                         ralink,wdtmux = <1>;
  15                 };
  16
  17                 gpio0: gpio@600 {
  18                         status = "okay";
  19                 };
  20
  21         };
  22
  23         cfi@1f000000 {
  24                 compatible = "cfi-flash";
  25                 reg = <0x1f000000 0x800000>;
  26
  27                 bank-width = <2>;
  28                 device-width = <2>;
  29                 #address-cells = <1>;
  30                 #size-cells = <1>;
  31
  32                 partition@0 {
  33                         label = "u-boot";
  34                         reg = <0x0 0x30000>;
  35                         read-only;
  36                 };
  37
  38                 partition@30000 {
  39                         label = "u-boot-env";
  40                         reg = <0x30000 0x10000>;
  41                         read-only;
  42                 };
  43
  44                 factory: partition@40000 {
  45                         label = "factory";
  46                         reg = <0x40000 0x10000>;
  47                         read-only;
  48                 };
  49
  50                 partition@50000 {
  51                         label = "firmware";
  52                         reg = <0x50000 0x7b0000>;
  53                 };
  54         };
  55
  56         gpio-leds {
  57                 compatible = "gpio-leds";
  58                 usb {
  59                         label = "bc2:blue:usb";
  60                         gpios = <&gpio0 20 1>;
  61                 };
  62         };
  63
  64         gpio-keys-polled {
  65                 compatible = "gpio-keys-polled";
  66                 #address-cells = <1>;
  67                 #size-cells = <0>;
  68                 poll-interval = <20>;
  69                 reset {
  70                         label = "reset";
  71                         gpios = <&gpio0 17 1>;
  72                         linux,code = <0x198>;
  73                 };
  74         };
  75
  76         ethernet@10100000 {
  77                 status = "okay";
  78         };
  79
  80         esw@10110000 {
  81                 status = "okay";
  82                 ralink,portmap = <0x2f>;
  83         };
  84
  85         wmac@10180000 {
  86                 status = "okay";
  87         };
  88
  89         otg@101c0000 {
  90                 status = "okay";
  91         };
  92 };